Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.
\n\nAMS qualification of HPE ProLiant Compute DL384 Gen12 Server
\n","curr_fixes_x_late":"Fix for amsd crashing upon hot-add/remove of non-nvme local drives.
\n","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"R13","value":"HPE ProLiant Compute DL384 Gen12"},{"key":"R11","value":"HPE ProLiant RL300 Gen11"}],"sw_keys":[{"name":"amsd","sw_key_expectedpath":"software:rpm"}],"upgrade_requirements":"Optional"}},{"DeviceClass":"79F0C163-0C13-4662-9DEA-09235FEF90CB","Devices":{"Device":[{"DeviceName":"MT_0000000551","FirmwareImages":[{"DelayAfterInstallSec":10,"FileName":".//fw-ConnectX6Lx-rel-26_41_1000-MCX631432AS-ADA_Ax-UEFI-14.34.12-FlexBoot-3.7.400.signed.bin","InstallDurationSec":"600","Order":1,"ResetRequired":true,"Type":"Firmware","UefiFlashable":false}],"Target":"a6b1a447-382a-5a4f-15b3-101f15b30012","Version":"26.41.1000"}]},"Type":"ComboFirmware","UpdatableBy":["RuntimeAgent"],"package":{"category":[{"key":"2900095","languages":[{"lang":"fr","x_late":"Micrologiciel - Réseau"},{"lang":"en","x_late":"Firmware - Network"},{"lang":"cn","x_late":"固件 - 网络"},{"lang":"tw","x_late":"韌體 ─ 網路"},{"lang":"de","x_late":"Firmware - Netzwerk"},{"lang":"ko","x_late":"펌웨어 - 네트워크"},{"lang":"it","x_late":"Firmware - Rete"},{"lang":"ja","x_late":"ファームウェア - ネットワーク"},{"lang":"es","x_late":"Firmware - Red"}]}],"description":[{"lang":"en","x_late":"This package contains the utilities and binary for upgrading Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE firmware on ARM Linux Operating Systems.\n\n"},{"lang":"ja","x_late":"このパッケージには、ARM Linuxオペレーティングシステム上でMellanox MCX631432AS-ADAI Ethernet 10/25Gb 2ポートSFP28 OCP3アダプターのHPEファームウェアをアップグレードするためのユーティリティとバイナリが含まれています。\n\n"}],"divisions":[{"key":"6","language":[{"lang":"tw","x_late":"伺服器"},{"lang":"en","x_late":"Server"},{"lang":"ko","x_late":"서버"},{"lang":"ja","x_late":"サーバ"},{"lang":"cn","x_late":"服务器"}]},{"key":"65","language":[{"lang":"tw","x_late":"網路"},{"lang":"en","x_late":"Networking"},{"lang":"ko","x_late":"네트워킹"},{"lang":"ja","x_late":"ネットワーク"},{"lang":"cn","x_late":"网络"}]}],"documentation":[{"lang":"en","x_late":"This software package contains the following firmware versions:
\n\n| Mellanox Ethernet Only Adapters | \n\t\t\tFirmware Version | \n\t\t\tPSID | \n\t\t
| Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P42041-B21) | \n\t\t\t26.41.1000 | \n\t\t\tMT_0000000551 | \n\t\t
pdating firmware with rpm installed:
\n\nUpdating firmware without installing rpm:
\n\n\n\n
On Secure Boot Enable mode:
\n\nThis product requires the Nvidia MFT Tools for your device and operating system to be installed before the firmware is updated on Secure Boot enable mode.
\nAlso, install the Nvidia (Mellanox) MFT tools and ensure the MST PCI module and MST PCI configuration module is loaded and running before attempting the firmware update on Secure Boot enable mode.
Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
\n
New features and changes included in version 26.41.1000:
\n\nThe following issues have been fixed in version 26.41.1000:
\n\nNote: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.
\n","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"R13","value":"HPE ProLiant Compute DL384 Gen12"},{"key":"R11","value":"HPE ProLiant RL300 Gen11"},{"key":"R12","value":"HPE ProLiant RL340 Gen11"}],"sw_keys":[{"name":"MT_0000000551","sw_key_expectedpath":"firmware:nic_mlnx_mcx631432as_adai"}],"upgrade_requirements":"Recommended"}},{"DeviceClass":"","Devices":{"Device":[]},"Type":"Firmware","UpdatableBy":["RuntimeAgent"],"package":{"category":[{"key":"2900095","languages":[{"lang":"fr","x_late":"Micrologiciel - Réseau"},{"lang":"en","x_late":"Firmware - Network"},{"lang":"cn","x_late":"固件 - 网络"},{"lang":"tw","x_late":"韌體 ─ 網路"},{"lang":"de","x_late":"Firmware - Netzwerk"},{"lang":"ko","x_late":"펌웨어 - 네트워크"},{"lang":"it","x_late":"Firmware - Rete"},{"lang":"ja","x_late":"ファームウェア - ネットワーク"},{"lang":"es","x_late":"Firmware - Red"}]}],"description":[{"lang":"en","x_late":"This package contains the utilities and binary for upgrading HPE MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter firmware on ARM Linux Operating Systems."}],"divisions":[{"key":"6","language":[{"lang":"tw","x_late":"伺服器"},{"lang":"en","x_late":"Server"},{"lang":"ko","x_late":"서버"},{"lang":"ja","x_late":"サーバ"},{"lang":"cn","x_late":"服务器"}]},{"key":"65","language":[{"lang":"tw","x_late":"網路"},{"lang":"en","x_late":"Networking"},{"lang":"ko","x_late":"네트워킹"},{"lang":"ja","x_late":"ネットワーク"},{"lang":"cn","x_late":"网络"}]}],"documentation":[{"lang":"en","x_late":"This software package contains the following firmware versions:
\n\n| Mellanox Ethernet Only Adapters | \n\t\t\tFirmware Version | \n\t\t\tPSID | \n\t\t
| Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21) | \n\t\t\t26.41.1000 | \n\t\t\tMT_0000000575 | \n\t\t
Updating firmware with rpm installed:
\n\n\n\n
On Secure Boot Enable mode:
\n\nThis product requires the Nvidia MFT Tools for your device and operating system to be installed before the firmware is updated on Secure Boot enable mode.
\nAlso, install the Nvidia (Mellanox) MFT tools and ensure the MST PCI module and MST PCI configuration module is loaded and running before attempting the firmware update on Secure Boot enable mode.
Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
\n
New features and changes included in version 26.41.1000:
\n\nThe following issues have been fixed in version 26.41.1000:
\n\nNote: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.
\n","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"R13","value":"HPE ProLiant Compute DL384 Gen12"},{"key":"R11","value":"HPE ProLiant RL300 Gen11"},{"key":"R12","value":"HPE ProLiant RL340 Gen11"}],"sw_keys":[{"name":"MT_0000000575","sw_key_expectedpath":"firmware:nic_mlnx_mcx631102as_adat"}],"upgrade_requirements":"Recommended"}},{"DeviceClass":"F6DE0320-2E0F-489A-B238-6DD8AE7C3811","Devices":{"Device":[{"DeviceName":"MV003200LXUJK","FirmwareImages":[{"DelayAfterInstallSec":10,"DirectFlashOk":false,"FileName":"KACM7ALEHPK5.rel","InstallDurationSec":300,"Order":1,"ResetRequired":false,"Type":"Firmware","UefiFlashable":false}],"Target":"4d2340a5-3056-3330-3230-304c58554a4b","Version":"HPK5"},{"DeviceName":"MV006400LXUJL","FirmwareImages":[{"DelayAfterInstallSec":10,"DirectFlashOk":false,"FileName":"KACM7ALEHPK5.rel","InstallDurationSec":300,"Order":1,"ResetRequired":false,"Type":"Firmware","UefiFlashable":false}],"Target":"4d2340a5-3056-3630-3430-304c58554a4c","Version":"HPK5"},{"DeviceName":"VV003840LXUJE","FirmwareImages":[{"DelayAfterInstallSec":10,"DirectFlashOk":false,"FileName":"KACM7ALEHPK5.rel","InstallDurationSec":300,"Order":1,"ResetRequired":false,"Type":"Firmware","UefiFlashable":false}],"Target":"562340a5-3056-3330-3834-304c58554a45","Version":"HPK5"},{"DeviceName":"VV007680LXUJF","FirmwareImages":[{"DelayAfterInstallSec":10,"DirectFlashOk":false,"FileName":"KACM7ALEHPK5.rel","InstallDurationSec":300,"Order":1,"ResetRequired":false,"Type":"Firmware","UefiFlashable":false}],"Target":"562340a5-3056-3730-3638-304c58554a46","Version":"HPK5"},{"DeviceName":"VV015360LXUJH","FirmwareImages":[{"DelayAfterInstallSec":10,"DirectFlashOk":false,"FileName":"KACM7ALEHPK5.rel","InstallDurationSec":300,"Order":1,"ResetRequired":false,"Type":"Firmware","UefiFlashable":false}],"Target":"562340a5-3056-3531-3336-304c58554a48","Version":"HPK5"}]},"Type":"Firmware","UpdatableBy":["RuntimeAgent"],"package":{"category":[{"key":"2900357","languages":[{"lang":"tw","x_late":"韌體 - PCIe NVMe 儲存磁碟"},{"lang":"en","x_late":"Firmware - PCIe NVMe Storage Disk"},{"lang":"ko","x_late":"펌웨어 - PCIe NVMe 스토리지 디스크"},{"lang":"cn","x_late":"固件 - PCIe NVMe存储磁盘"}]}],"description":[{"lang":"en","x_late":"This arm64 Smart Component provides firmware for the following drive models: MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH"}],"divisions":[{"key":"9","language":[{"lang":"tw","x_late":"儲存裝置"},{"lang":"en","x_late":"Storage"},{"lang":"ko","x_late":"스토리지"},{"lang":"ja","x_late":"ストレージ"},{"lang":"cn","x_late":"存储设备"}]}],"documentation":[{"lang":"en","x_late":"Deliverable Name:
\n Online HDD/SSD Flash Component for Linux (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives
Release Version and/or Date:
\n HPK5
\n"}],"files":[{"bytes":"5526975","datemodified":"2024-10-07T23:02:19","file_list":["./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1","./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/.cpq_package.inc","./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/.setup","./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/CP062049.xml","./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/KACM7ALEHPK5.rel","./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/hpsetup","./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/libsetup.so","./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/payload.json","./usr/lib/aarch64-linux-gnu/firmware-hdd-44d456ce65-HPK5-1.1/setup","./usr/lib/aarch64-linux-gnu/hp-scexe-compat","./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP062049.scexe","./usr/lib/aarch64-linux-gnu/scexe-compat","./usr/lib/aarch64-linux-gnu/scexe-compat/CP062049.scexe"],"md5sum":"f5d61f6f26cc593916fb2d5f50c61e90","name":"firmware-hdd-44d456ce65-HPK5-1.1.aarch64.rpm","release":"2024-10-08T02:55:48","revision":"0","sha1sum":"faf47e601150f0fc373e81ed94312b260226a378","size":"5MB","target_guids":["4d2340a5-3056-3330-3230-304c58554a4b","4d2340a5-3056-3630-3430-304c58554a4c","562340a5-3056-3330-3834-304c58554a45","562340a5-3056-3730-3638-304c58554a46","562340a5-3056-3531-3336-304c58554a48"],"type_of_change":"1","version":"HPK5"}],"id":{"product":"1d4ec3582de648c5a0415a5960a70552","version":"ff9223c80f0246479fb1c28f54c06859"},"installation":{"command":"CP043255.scexe","command_params":"","install_caps":{"needuseracct":"no","silent":"yes"},"per_device_install_time_seconds":120,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後可能需要重新啟動，更新才會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot may be required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅이 필요할 수 있습니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。"},{"lang":"cn","x_late":"安装之后必须重启才能使更新生效并保持硬件稳定性。"}]}],"reboot_required":"no"},"installation_dependency":{"DependencyRequirement":[{"ListConditional":"AND","SubRequirements":[{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus servers firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus servers firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus server firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus server firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR408i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR408i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]}]}]},"installation_notes":[{"lang":"en","x_late":"
On RPM-based Linux system:
\n\nUpdate firmware by installing the rpm:
\n\nUpdating firmware without installing the rpm:
\n\nAdditional Information:
\n\nInstalling the firmware rpm package does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
\n"}],"manufacturer_name":[{"lang":"en","x_late":"Hewlett Packard Enterprise"},{"lang":"cn","x_late":"惠普企业"}],"name":[{"lang":"en","x_late":"Online HDD/SSD Flash Component for Linux (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives"}],"prerequisites":{"required_diskspace":{"size_kb":"4000"},"supported_devices":[{"id":"VV007680LXUJF","target_guid":"562340a5-3056-3730-3638-304c58554a46","type":"nvme"},{"id":"VV015360LXUJH","target_guid":"562340a5-3056-3531-3336-304c58554a48","type":"nvme"},{"id":"MV006400LXUJL","target_guid":"4d2340a5-3056-3630-3430-304c58554a4c","type":"nvme"},{"id":"VV003840LXUJE","target_guid":"562340a5-3056-3330-3834-304c58554a45","type":"nvme"},{"id":"MV003200LXUJK","target_guid":"4d2340a5-3056-3330-3230-304c58554a4b","type":"nvme"}],"supported_operating_systems":[{"major":"9","minor":"0","name":"Red Hat Enterprise Linux 9 for ARM","platform":"red_hat_enterprise_linux_aarch64","sr":"OEM"},{"major":"15","minor":"0","name":"SUSE Linux Enterprise Server 15 for ARM","platform":"suse_linux_enterprise_server_aarch64","sr":"OEM"},{"major":"8","minor":"0","name":"Red Hat Enterprise Linux 8 Server for ARM","platform":"red_hat_enterprise_linux_ARM","sr":"OEM"}],"supported_platforms":false},"release_date":"2024-07-30T13:31:13","revision_history":[{"lang":"en","latest_enhancements_x_late":"","latest_fixes_x_late":""},{"curr_enhancements_x_late":"","curr_fixes_x_late":"To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
\n\nlocalhost OS example:
\nilorest flashfwpkg <file_name.fwpkg>
remote example:
\nilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
\nThis firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
\n\nUpdate the firmware and software in the usual manner.
\n\nReboot your system for the update to take effect immediately.
\n"}],"manufacturer_name":[{"lang":"en","x_late":"Hewlett Packard Enterprise"},{"lang":"cn","x_late":"惠普企业"}],"name":[{"lang":"en","x_late":"ROM Flash Firmware Package - HPE ProLiant DL384 Gen12 (R13) Servers"}],"prerequisites":{"required_diskspace":{"size_kb":"11000"},"supported_operating_systems":[{"major":"0","minor":"0","name":"Cross Operating System","platform":"oi","sr":"OEM"},{"major":"7","minor":"0","name":"VMware ESXi 7.0","platform":"vmware_esx_server","sr":"OEM"},{"major":"8","minor":"0","name":"VMware ESXi 8.0","platform":"vmware_esx_server","sr":"OEM"}],"supported_platforms":false},"release_date":"2024-11-14T05:30:22","revision_history":[{"lang":"en","latest_enhancements_x_late":"","latest_fixes_x_late":""},{"curr_enhancements_x_late":"Important Notes:
\n\nNone
\n\nFirmware Dependencies:
\n\nNone
\n\nEnhancements/New Features:
\n\nThis is the initial version of the firmware.
\n\nKnown Issues:
\n\nNone
\n","curr_fixes_x_late":"","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"R13","value":"HPE ProLiant Compute DL384 Gen12"},{"key":"FTP","value":"FTP-Only System"}],"sw_keys":[{"name":"R13","sw_key_expectedpath":"firmware:system"}],"upgrade_requirements":"Recommended"}},{"DeviceClass":"231cd606-a7f5-4ab6-bed8-823582227a3d","Devices":{"Device":[{"DeviceName":"BIOS_SCP BUNDLE","FirmwareImages":[{"DelayAfterInstallSec":0,"DirectFlashOk":true,"FileName":"R11_1.72_09_19_2024_scp_2.10.20240201_appended_binded_signed.bin","InstallDurationSec":120,"Order":1,"PLDMImage":false,"ResetRequired":true,"ServerPowerOff":true,"SysPowerON":false,"Type":"Firmware","UefiFlashable":true}],"Target":"00000000-0000-0000-0000-000000000250","Version":"2.10.20240201"}]},"PackageFormat":"FWPKG-v2","Type":"Firmware","UpdatableBy":["Bmc"],"package":{"category":[{"key":"1200212","languages":[{"lang":"en","x_late":"BIOS - System ROM"}]}],"description":[{"lang":"en","x_late":"This firmware package provides updated system firmware that can be installed online through the use of tools such as Smart Update Manager (SUM) and the RESTful Interface Tool (iLOrest) on supported Operating Systems. Additionally, when used in conjunction with SUM or iLOrest, this firmware package allows the user to update firmware on remote servers from a central location. This remote deployment capability eliminates the need for the user to be physically present at the server in order to perform a firmware update."},{"lang":"ja","x_late":"このファームウェアパッケージは、サポート対象のオペレーティングシステムでSmart Update Manager（SUM）やRESTfulインターフェイスツール（iLOrest）などのツールを使用して、オンラインでインストールできるアップデートされたシステムファームウェアを提供します。さらに、SUMまたはiLOrestと共に使用する場合、このファームウェアパッケージは、ユーザーが中央ロケーションからリモートサーバー上のファームウェアをアップデートすることを可能にします。このリモート展開機能により、ファームウェアをアップデートするために使用者がサーバーへ物理的に移動する必要がなくなります。"}],"divisions":[{"key":"6","language":[{"lang":"tw","x_late":"伺服器"},{"lang":"en","x_late":"Server"},{"lang":"ko","x_late":"서버"},{"lang":"ja","x_late":"サーバ"},{"lang":"cn","x_late":"服务器"}]}],"documentation":[],"files":[{"bytes":"33857479","datemodified":"2024-10-09T06:06:05","file_list":["payload.json","R11_1.72_09_19_2024_scp_2.10.20240201_appended_binded.xml","R11_1.72_09_19_2024_scp_2.10.20240201_appended_binded_signed.bin"],"md5sum":"8e2064a8a3e2d561ae4d6e84434701b6","name":"R11_1.72_09_19_2024_scp_2.10.20240201_appended_binded.fwpkg","release":"2024-10-09T06:02:52","revision":"0","sha1sum":"be46826fc4dbdcdbe540b9920223d4a9256b39c1","size":"32MB","target_guids":["00000000-0000-0000-0000-000000000250"],"type_of_change":"1","version":"1.72-09-19-2024"}],"id":{"product":"4742f9d3cc464355ba3857b16f5bb333","version":"10b224a98b12458abb55469cd62ed934"},"installation":{"command":"","command_params":"","install_caps":{"needuseracct":"no","silent":"no"},"per_device_install_time_seconds":0,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後必須重新啟動，更新才會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot is required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅해야 합니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。"},{"lang":"cn","x_late":"安装之后必须重启才能使更新生效并保持硬件稳定性。"}]}],"reboot_required":"yes"},"installation_dependency":{"DependencyRequirement":[{"ListConditional":"AND","SubRequirements":[{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP CRU Driver for VMware ESXi 5.0","OSVersion":{"name":"VMware","value":"5.0"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ecbe6e85ad","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"5.0.3.9-1OEM","description":"HP CRU Driver for VMware ESXi 5.0"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP CRU Driver for VMware ESXi 5.0","OSVersion":{"name":"VMware","value":"5.0"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ecf961a5f4","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"5.0.3.9-1OEM","description":"HP CRU Driver for VMware ESXi 5.0"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP CRU Driver for VMware ESXi 5.1","OSVersion":{"name":"VMware","value":"5.1"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ecbe6e85ad","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"5.0.3.9-1OEM","description":"HP CRU Driver for VMware ESXi 5.1"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP CRU Driver for VMware ESXi 5.1","OSVersion":{"name":"VMware","value":"5.1"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ecf961a5f4","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"5.0.3.9-1OEM","description":"HP CRU Driver for VMware ESXi 5.1"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP CRU Driver for VMware ESXi 5.5","OSVersion":{"name":"VMware","value":"5.5"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ecbe6e85ad","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"5.5.4.1-1OEM","description":"HP CRU Driver for VMware ESXi 5.5"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP CRU Driver for VMware ESXi 5.5","OSVersion":{"name":"VMware","value":"5.5"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ecf961a5f4","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"5.5.4.1-1OEM","description":"HP CRU Driver for VMware ESXi 5.5"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP CRU Driver for VMware ESXi 5.5","OSVersion":{"name":"VMware","value":"5.5"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ec53c3d5a6","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"5.5.4.1-1OEM","description":"HP CRU Driver for VMware ESXi 5.5"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP CRU Driver for VMware ESXi 6.0","OSVersion":{"name":"VMware","value":"6.0"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ec53c3d5a6","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.0.8.0-1OEM","description":"HP CRU Driver for VMware ESXi 6.0"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP CRU Driver for VMware ESXi 6.0","OSVersion":{"name":"VMware","value":"6.0"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ecbe6e85ad","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.0.8.0-1OEM","description":"HP CRU Driver for VMware ESXi 6.0"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP CRU Driver for VMware ESXi 6.5","OSVersion":{"name":"VMware","value":"6.5"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ec53c3d5a6","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.5.8.0-1OEM","description":"HP CRU Driver for VMware ESXi 6.5"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP CRU Driver for VMware ESXi 6.5","OSVersion":{"name":"VMware","value":"6.5"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ecbe6e85ad","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.5.8.0-1OEM","description":"HP CRU Driver for VMware ESXi 6.5"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP CRU Driver for VMware ESXi 6.5","OSVersion":{"name":"VMware","value":"6.5"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ec53c3d5a6","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"650.6.5.8","description":"HP CRU Driver for VMware ESXi 6.5"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP CRU Driver for VMware ESXi 6.5","OSVersion":{"name":"VMware","value":"6.5"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ecbe6e85ad","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"650.6.5.8","description":"HP CRU Driver for VMware ESXi 6.5"},{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE CRU Driver Bundle Smart Component for ESXi 7.0 version 700.10.16-1OEM.700.0.0.14828939 or greater is required and should be already active","OSVersion":{"name":"VMware","value":"7.0"},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"700.10.16-1OEM.700.0.0.14828939","description":"HPE CRU Driver Bundle Smart Component for ESXi 7.0 version 700.10.16-1OEM.700.0.0.14828939 or greater is required and should be already active"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HPE CRU Driver Bundle Smart Component for ESXi 7.0 version 700.10.16-1OEM.700.0.0.14828939 or greater is required and should be already active","OSVersion":{"name":"VMware","value":"7.0"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ec53c3d5a6","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"700.10.16-1OEM.700.0.0.14828939","description":"HPE CRU Driver Bundle Smart Component for ESXi 7.0 version 700.10.16-1OEM.700.0.0.14828939 or greater is required and should be already active"}]},{"ListConditional":"OR","Requirement":[{"Condition":"InstalledBefore","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP ProLiant Integrated Lights-Out Management Interface Driver for Windows","OSVersion":{},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ece65aa5f6","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"*","description":"HP ProLiant Integrated Lights-Out Management Interface Driver for Windows"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP Lights-Out Drivers and Agents for Linux","OSVersion":{},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ec587429e7","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"*","description":"HP Lights-Out Drivers and Agents for Linux"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP Lights-Out Drivers and Agents for Linux","OSVersion":{},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9eca0b72f1f","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"*","description":"HP Lights-Out Drivers and Agents for Linux"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP Lights-Out Drivers and Agents for Linux","OSVersion":{},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ec6d7bdce8","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"*","description":"HP Lights-Out Drivers and Agents for Linux"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP Channel Interface Driver for VMWare","OSVersion":{},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ecf1c92383","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"*","description":"HP Channel Interface Driver for VMWare"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HPE Channel Interface Driver for VMware","OSVersion":{},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ec2fe7fb84","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"*","description":"HPE Channel Interface Driver for VMware"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HPE Channel Interface Driver for VMware","OSVersion":{"name":"VMware","value":"*"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ecb1b2cabc","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"*","description":"HPE Channel Interface Driver for VMware"},{"Condition":"AlreadyActive","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HPE Channel Interface Driver for VMware","OSVersion":{"name":"VMware","value":"*"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ecb1b2cabc","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"*","description":"HPE Channel Interface Driver for VMware"},{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE iLO Driver Bundle Smart Component for ESXi 7.0 version 700.10.1.0.16-1OEM.700.0.0.14828939 or greater is required and should be already active","OSVersion":{"name":"VMware","value":"*"},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"*","description":"HPE iLO Driver Bundle Smart Component for ESXi 7.0 version 700.10.1.0.16-1OEM.700.0.0.14828939 or greater is required and should be already active"},{"Condition":"InstalledBefore","DeviceGuid":"E7A8B7DD-A6C0-4056-B14A-97BC423DDC7B","Message":"HP ProLiant iLO 5 Channel Interface Driver for Windows must be installed prior to this component","OSVersion":{"name":"Windows","value":"*"},"RequirementGUID":"20a6e8e4-bf33-4c71-a6bf-d9ec1417651e","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"*","description":"HP ProLiant iLO 5 Channel Interface Driver for Windows must be installed prior to this component"}]}]}]},"installation_notes":[{"lang":"en","x_late":"To flash this firmware package, use the following iLOrest command. See https://www.hpe.com/info/resttool to download the latest version of the iLOrest tool.
\n\nlocalhost OS example:
\nilorest flashfwpkg <file_name.fwpkg>
remote example:
\nilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、https://www.hpe.com/info/resttoolを参照してください。
\n\nローカルホストOSの例：
\nilorest flashfwpkg
リモートの例:
\n ilorest flashfwpkg
Added an "ARM Performance Workaround" option in the ROM-Based Setup Utility (RBSU) and established "Software Workaround" as the default value.
\n","latest_fixes_x_late":"Important Notes:
\n\nNone
\n\nFirmware Dependencies:
\n\nNone
\n\nProblems Fixed:
\n\nThis revision of the System ROM includes the revision of the zlib library update which provides mitigation for security vulnerabilities documented as CVE-2022-37434.
\n\nThis revision of the System ROM includes the revision of the FreeType library update which provides mitigation for security vulnerabilities documented as CVE-2022-27404, CVE-2022-27405 and CVE-2022-27406.
\n\nThis revision of the System ROM includes the revision of the OpenSSL library update which provides mitigation for security vulnerabilities documented as CVE-2022-0778, CVE-2022-2097, CVE-2023-0286, CVE-2022-4304, CVE-2023-2650, CVE-2023-3817, CVE-2023-5678 and CVE-2024-0727.
\n\nThis revision of the System ROM includes the revision of the EDK2 update which provides mitigation for security vulnerabilities documented as CVE-2022-36765.
\n\nTranslated the "REST requests extended debug" option in ROM-Based Setup Utility (RBSU) into Japanese and Chinese.
\n\nTranslated the "ARM Performance Workaround" option in ROM-Based Setup Utility (RBSU) into Japanese and Chinese.
\n\nAddressed an issue where the certificate could not be downloaded from the https URL in ROM-Based Setup Utility (RBSU).
\n\nAddressed an issue where the Omit Boot Device Event option was not working in ROM-Based Setup Utility (RBSU).
\n\nAddressed an issue where the Platform Class field in TPM2 ACPI table was incorrect.
\n\nAddressed an issue where the secure boot PK Key could not be deleted using Redfish command.
\n\nAddressed an issue where TPM power mode could not be set to Low Power Mode Disabled.
\n\nKnown Issues:
\n\nNone
\n"},{"curr_enhancements_x_late":"Important Notes:
\n\nNone
\n\nFirmware Dependencies:
\n\nNone
\n\nEnhancements/New Features:
\n\nEnhanced the ROM firmware update process by the Smart Update Manager.
\n\nKnown Issues:
\n\nNone
\n","curr_fixes_x_late":"","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"R11","value":"HPE ProLiant RL300 Gen11"}],"sw_keys":[{"name":"R11","sw_key_expectedpath":"firmware:system"}],"upgrade_requirements":"Optional"}},{"DeviceClass":"4149ebb7-d64b-4654-b679-4280f349ea50","Devices":{"Device":[{"DeviceName":"UBM5 Backplane PIC","FirmwareImages":[{"DelayAfterInstallSec":0,"DirectFlashOk":true,"FileName":"HPE_UBM5_1.10_B.HPb","InstallDurationSec":1200,"Order":1,"PLDMImage":true,"ResetRequired":false,"ServerPowerOff":false,"SysPowerON":true,"Type":"Firmware","UefiFlashable":true}],"Target":"9675b54e-1c96-44c3-a7a1-901505000000","Version":"1.10"}]},"PackageFormat":"FWPKG-v2","Type":"Firmware","UpdatableBy":["Bmc"],"package":{"category":[{"key":"2900027","languages":[{"lang":"tw","x_late":"韌體 ─ 系統"},{"lang":"en","x_late":"Firmware - System"},{"lang":"ko","x_late":"펌웨어 - 시스템"},{"lang":"ja","x_late":"ファームウェア - システム"},{"lang":"cn","x_late":"固件 - 系统 ROM"}]}],"description":[{"lang":"en","x_late":"This firmware package contains PLDM firmware for UBM5 storage backplanes."}],"divisions":[{"key":"68","language":[{"lang":"en","x_late":"ServerOptions"},{"lang":"ko","x_late":"서버 옵션"},{"lang":"ja","x_late":"サーバ オプション"},{"lang":"cn","x_late":"服务器选项"}]},{"key":"6","language":[{"lang":"tw","x_late":"伺服器"},{"lang":"en","x_late":"Server"},{"lang":"ko","x_late":"서버"},{"lang":"ja","x_late":"サーバ"},{"lang":"cn","x_late":"服务器"}]}],"documentation":[],"files":[{"bytes":"457571","datemodified":"2024-09-12T08:20:16","file_list":["HPE_UBM5_1.10_B.HPb","HPE_UBM5_1.10_B.xml","payload.json"],"md5sum":"ee2d408c487d547c9a538d4f129ac378","name":"HPE_UBM5_1.10_B.fwpkg","release":"2024-09-12T08:15:49","revision":"0","sha1sum":"6288c4fad0350a3071fd548a60f7c974d2854802","size":"446KB","target_guids":["9675b54e-1c96-44c3-a7a1-901505000000"],"type_of_change":"1","version":"1.10"}],"id":{"product":"6ca442c991c749709fbf69d8d57a3358","version":"738858ad670a41649c53a7daae2da47f"},"installation":{"command":"","command_params":"","install_caps":{"needuseracct":"no","silent":"yes"},"per_device_install_time_seconds":1200,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後無需重新啟動，更新就會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot is not required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"설치 후 재부팅하지 않아도 업데이트가 적용되고 하드웨어 안정성이 유지됩니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要ありません。"},{"lang":"cn","x_late":"安装之后无需重启即可使更新生效并可保持硬件稳定性。"}]}],"reboot_required":"no"},"installation_dependency":{"DependencyRequirement":[{"ListConditional":"AND","SubRequirements":[{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.14.062","description":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.14.062","description":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.14.062","description":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]}]}]},"installation_notes":[{"lang":"en","x_late":"Flash the PLDM firmware using any below methods
\n\n1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
\n\n localhost OS example:
\n ilorest flashfwpkg <file_name.fwpkg>
remote example:
\n ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
\n\nSupplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
\n\nPlace the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
\n\tPlace the desired firmware packages and components to be updated in the directory "\\packages" on the USB key.
\n\tUpdate the firmware and software in the usual manner.
\n\n3. Flash from iLO GUI
\n\nFix FRU issue
\n"},{"curr_enhancements_x_late":"Support new Gen12 servers.
\n","curr_fixes_x_late":"","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"A55","value":"HPE ProLiant DL365 Gen11 Server"},{"key":"A55","value":"HPE ProLiant DL385 Gen11 Server"},{"key":"A56","value":"HPE ProLiant DL325 Gen11 Server"},{"key":"A56","value":"HPE ProLiant DL345 Gen11 Server"},{"key":"U58","value":"HPE Alletra 4110 Server"},{"key":"R13","value":"HPE ProLiant Compute DL384 Gen12"},{"key":"U54","value":"HPE ProLiant DL360 Gen11 Server"},{"key":"U54","value":"HPE ProLiant DL380 Gen11 Server"},{"key":"U59","value":"HPE ProLiant DL560 Gen11 Server"},{"key":"U54","value":"HPE ProLiant ML350 Gen11 Server"},{"key":"U63","value":"HPE ProLiant DL320 Gen11 Server"},{"key":"U58","value":"HPE Alletra Storage Server 4120"},{"key":"I45","value":"HPE Synergy 480 Gen11 Compute Module"}],"sw_keys":[{"name":"UBM5PIC","sw_key_expectedpath":"firmware:sd:ubm"}],"upgrade_requirements":"Recommended"}},{"DeviceClass":"4149ebb7-d64b-4654-b679-4280f349ea50","Devices":{"Device":[{"DeviceName":"UBM4 Backplane PIC","FirmwareImages":[{"DelayAfterInstallSec":0,"DirectFlashOk":true,"FileName":"HPE_UBM4_1.24_G.HPb","InstallDurationSec":600,"Order":1,"PLDMImage":true,"ResetRequired":false,"ServerPowerOff":false,"SysPowerON":true,"Type":"Firmware","UefiFlashable":true}],"Target":"9675b54e-1c96-44c3-a7a1-901504000000","Version":"1.24"}]},"PackageFormat":"FWPKG-v2","Type":"Firmware","UpdatableBy":["Bmc"],"package":{"category":[{"key":"2900027","languages":[{"lang":"tw","x_late":"韌體 ─ 系統"},{"lang":"en","x_late":"Firmware - System"},{"lang":"ko","x_late":"펌웨어 - 시스템"},{"lang":"ja","x_late":"ファームウェア - システム"},{"lang":"cn","x_late":"固件 - 系统 ROM"}]}],"description":[{"lang":"en","x_late":"This firmware package contains PLDM firmware for UBM4 storage backplanes."}],"divisions":[{"key":"68","language":[{"lang":"en","x_late":"ServerOptions"},{"lang":"ko","x_late":"서버 옵션"},{"lang":"ja","x_late":"サーバ オプション"},{"lang":"cn","x_late":"服务器选项"}]},{"key":"6","language":[{"lang":"tw","x_late":"伺服器"},{"lang":"en","x_late":"Server"},{"lang":"ko","x_late":"서버"},{"lang":"ja","x_late":"サーバ"},{"lang":"cn","x_late":"服务器"}]}],"documentation":[],"files":[{"bytes":"62652","datemodified":"2024-09-13T04:58:18","file_list":["HPE_UBM4_1.24_G.HPb","HPE_UBM4_1.24_G.xml","payload.json"],"md5sum":"028965ae0744c5bd9edba939bf775db9","name":"HPE_UBM4_1.24_G.fwpkg","release":"2024-09-13T04:53:37","revision":"0","sha1sum":"f08bde255f56cfe95a4cb7cfb0c0c04754b9c24e","size":"61KB","target_guids":["9675b54e-1c96-44c3-a7a1-901504000000"],"type_of_change":"1","version":"1.24"}],"id":{"product":"1e88e3b27b814bcdbc8dcf6390d324d1","version":"4e14138c4c714237bcc8bfb333533ccd"},"installation":{"command":"","command_params":"","install_caps":{"needuseracct":"no","silent":"yes"},"per_device_install_time_seconds":600,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後無需重新啟動，更新就會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot is not required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"설치 후 재부팅하지 않아도 업데이트가 적용되고 하드웨어 안정성이 유지됩니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要ありません。"},{"lang":"cn","x_late":"安装之后无需重启即可使更新生效并可保持硬件稳定性。"}]}],"reboot_required":"no"},"installation_dependency":{"DependencyRequirement":[{"ListConditional":"AND","SubRequirements":[{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.22.3-4597 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4597","description":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.22.3-4597 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 SR308i-o/SR308i-p controller firmware version 5.32 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"5.32","description":"HPE Gen11 SR308i-o/SR308i-p controller firmware version 5.32 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 SR308i-o/SR308i-p controller firmware version 5.32 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"5.32","description":"HPE Gen11 SR308i-o/SR308i-p controller firmware version 5.32 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.14.062","description":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.14.062","description":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.14.062","description":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-o Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4597","description":"HPE MR216i-o Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4597","description":"HPE MR216i-p Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen10 Plus/Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4597","description":"HPE MR216i-p Gen10 Plus/Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR408i-o Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4597","description":"HPE MR408i-o Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen10 Plus/Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4597","description":"HPE MR416i-p Gen10 Plus/Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-o Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4597","description":"HPE MR416i-o Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-a Gen10 Plus Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4650","description":"HPE MR416i-a Gen10 Plus Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4650","description":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 SR308i-o/SR308i-p controller firmware version 5.32 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"5.32","description":"HPE Gen11 SR308i-o/SR308i-p controller firmware version 5.32 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus Controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.14.062","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus Controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus Controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.14.062","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus Controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]}]}]},"installation_notes":[{"lang":"en","x_late":"Flash the PLDM firmware using any below methods
\n\n1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
\n\n localhost OS example:
\n ilorest flashfwpkg <file_name.fwpkg>
remote example:
\n ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
\n\nSupplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
\n\nPlace the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
\n\tPlace the desired firmware packages and components to be updated in the directory "\\packages" on the USB key.
\n\tUpdate the firmware and software in the usual manner.
\n\n3. Flash from iLO GUI
\n\nFor Gen11 PR3 & 2023 March MSB
\n","latest_fixes_x_late":""},{"curr_enhancements_x_late":"Deliverable Name:
\n Online NVMe SSD Flash Component for Linux (arm64) - VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives
\n
\nRelease Version and/or Date:
\n HPK5
\n"}],"files":[{"bytes":"6030709","datemodified":"2024-09-05T23:07:27","file_list":["libsetup.so","GPM173XAHPK5.rel","setup","payload.json","CP062947.xml"],"md5sum":"55c85339b61a2cea52fefe127a115f90","name":"CP062947.scexe","release":"2024-09-06T03:05:06","revision":"0","sha1sum":"6b277b1ae11bdc77ed78a5bb480dcad3e3c1d416","size":"5MB","target_guids":["562340a5-304f-3130-3932-304b59444d54","562340a5-304f-3330-3834-304b59444d56","4d2340a5-304f-3130-3630-304b59444d55","4d2340a5-304f-3330-3230-304b59444e43","4d2340a5-304f-3630-3430-304b59444e44","562340a5-304f-3730-3638-304b59444e41","562340a5-304f-3531-3336-304b59444e42"],"type_of_change":"1","version":"HPK5"}],"id":{"product":"e316b66b271b47fc80ca7f43b1a1a853","version":"dba3a48c14fe4dc090cce78f2048d41f"},"installation":{"command":"CP041864.scexe","command_params":"","install_caps":{"needuseracct":"no","silent":"yes"},"per_device_install_time_seconds":120,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後可能需要重新啟動，更新才會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot may be required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅이 필요할 수 있습니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。"},{"lang":"cn","x_late":"安装之后必须重启才能使更新生效并保持硬件稳定性。"}]}],"reboot_required":"no"},"installation_dependency":{},"installation_notes":[{"lang":"en","x_late":"
On DEB-based Linux system:
\n\nUpdating firmware by installing the deb:
\n\nUpdating firmware without installing the deb:
\n\nAdditional Information:
\n\nInstalling the firmware deb package does not update the firmware. It merely extracts the deb content to the local system. Updating the firmware on the local system requires following the above outlined steps.
\n"}],"manufacturer_name":[{"lang":"en","x_late":"Hewlett Packard Enterprise"},{"lang":"cn","x_late":"惠普企业"}],"name":[{"lang":"en","x_late":"Online NVMe SSD Flash Component for Linux deb (arm64) - VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives"}],"prerequisites":{"required_diskspace":{"size_kb":"4000"},"supported_devices":[{"id":"MO001600KYDMU","target_guid":"4d2340a5-304f-3130-3630-304b59444d55","type":"nvme"},{"id":"MO006400KYDND","target_guid":"4d2340a5-304f-3630-3430-304b59444e44","type":"nvme"},{"id":"VO015360KYDNB","target_guid":"562340a5-304f-3531-3336-304b59444e42","type":"nvme"},{"id":"VO007680KYDNA","target_guid":"562340a5-304f-3730-3638-304b59444e41","type":"nvme"},{"id":"MO003200KYDNC","target_guid":"4d2340a5-304f-3330-3230-304b59444e43","type":"nvme"},{"id":"VO001920KYDMT","target_guid":"562340a5-304f-3130-3932-304b59444d54","type":"nvme"},{"id":"VO003840KYDMV","target_guid":"562340a5-304f-3330-3834-304b59444d56","type":"nvme"}],"supported_operating_systems":[{"major":"22","minor":"04","name":"Ubuntu 22.04 LTS","platform":"ubuntu2204","sr":"OEM"},{"major":"24","minor":"04","name":"Ubuntu 24.04 LTS","platform":"ubuntu2404","sr":"OEM"}],"supported_platforms":false},"release_date":"2024-09-29T09:13:22","revision_history":[{"lang":"en","latest_enhancements_x_late":"","latest_fixes_x_late":""},{"curr_enhancements_x_late":"","curr_fixes_x_late":"Deliverable Name:
\n Online NVMe SSD Flash Component for Linux (arm64) - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives
\n
\nRelease Version and/or Date:
\n HPK5
\n"}],"files":[{"bytes":"6042484","datemodified":"2024-10-10T05:08:03","file_list":["libsetup.so","setup","payload.json","CP063851.xml","GPM1743SHPK5.rel"],"md5sum":"0e7a72408ec6099220c0591d7b349a97","name":"CP063851.scexe","release":"2024-10-10T09:05:53","revision":"0","sha1sum":"f72f1a2c8d92ec801732c28a96988606cb66d946","size":"5MB","target_guids":["562340a5-3056-3330-3834-304b584e5448","562340a5-3056-3730-3638-304b584e544e","562340a5-3056-3531-3336-304b584e5450"],"type_of_change":"1","version":"HPK5"}],"id":{"product":"d2883a50aa3b46a799d64ea3a77f96a2","version":"56cd61d0e3444fa78fc0e073fba63129"},"installation":{"command":"CP041864.scexe","command_params":"","install_caps":{"needuseracct":"no","silent":"yes"},"per_device_install_time_seconds":120,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後可能需要重新啟動，更新才會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot may be required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅이 필요할 수 있습니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。"},{"lang":"cn","x_late":"安装之后必须重启才能使更新生效并保持硬件稳定性。"}]}],"reboot_required":"no"},"installation_dependency":{},"installation_notes":[{"lang":"en","x_late":"
On DEB-based Linux system:
\n\nUpdating firmware by installing the deb:
\n\nUpdating firmware without installing the deb:
\n\nAdditional Information:
\n\nInstalling the firmware deb package does not update the firmware. It merely extracts the deb content to the local system. Updating the firmware on the local system requires following the above outlined steps.
\n"}],"manufacturer_name":[{"lang":"en","x_late":"Hewlett Packard Enterprise"},{"lang":"cn","x_late":"惠普企业"}],"name":[{"lang":"en","x_late":"Online NVMe SSD Flash Component for Linux deb (arm64) - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives"}],"prerequisites":{"required_diskspace":{"size_kb":"4000"},"supported_devices":[{"id":"VV015360KXNTP","target_guid":"562340a5-3056-3531-3336-304b584e5450","type":"nvme"},{"id":"VV007680KXNTN","target_guid":"562340a5-3056-3730-3638-304b584e544e","type":"nvme"},{"id":"VV003840KXNTH","target_guid":"562340a5-3056-3330-3834-304b584e5448","type":"nvme"}],"supported_operating_systems":[{"major":"22","minor":"04","name":"Ubuntu 22.04 LTS","platform":"ubuntu2204","sr":"OEM"},{"major":"24","minor":"04","name":"Ubuntu 24.04 LTS","platform":"ubuntu2404","sr":"OEM"}],"supported_platforms":false},"release_date":"2024-11-09T03:42:21","revision_history":[{"lang":"en","latest_enhancements_x_late":"","latest_fixes_x_late":""},{"curr_enhancements_x_late":"","curr_fixes_x_late":"Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.
\n\nAMS qualification of HPE ProLiant Compute DL384 Gen12 Server
\n","curr_fixes_x_late":"Fix for amsd crashing upon hot-add/remove of non-nvme local drives.
\n","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"R13","value":"HPE ProLiant Compute DL384 Gen12"},{"key":"R11","value":"HPE ProLiant RL300 Gen11"}],"sw_keys":[{"name":"amsd","sw_key_expectedpath":"software:rpm"}],"upgrade_requirements":"Recommended"}},{"DeviceClass":"F6DE0320-2E0F-489A-B238-6DD8AE7C3811","Devices":{"Device":[{"DeviceName":"VR000480KXNXE","FirmwareImages":[{"DelayAfterInstallSec":10,"DirectFlashOk":false,"FileName":"M7450ALLHPK3.rel","InstallDurationSec":300,"Order":1,"ResetRequired":false,"Type":"Firmware","UefiFlashable":false}],"Target":"562340a5-3052-3030-3438-304b584e5845","Version":"HPK3"},{"DeviceName":"VR000960KXNZU","FirmwareImages":[{"DelayAfterInstallSec":10,"DirectFlashOk":false,"FileName":"M7450ALLHPK3.rel","InstallDurationSec":300,"Order":1,"ResetRequired":false,"Type":"Firmware","UefiFlashable":false}],"Target":"562340a5-3052-3030-3936-304b584e5a55","Version":"HPK3"},{"DeviceName":"VS001920KXNXF","FirmwareImages":[{"DelayAfterInstallSec":10,"DirectFlashOk":false,"FileName":"M7450ALLHPK3.rel","InstallDurationSec":300,"Order":1,"ResetRequired":false,"Type":"Firmware","UefiFlashable":false}],"Target":"562340a5-3053-3130-3932-304b584e5846","Version":"HPK3"}]},"Type":"Firmware","UpdatableBy":["RuntimeAgent"],"package":{"category":[{"key":"2900357","languages":[{"lang":"tw","x_late":"韌體 - PCIe NVMe 儲存磁碟"},{"lang":"en","x_late":"Firmware - PCIe NVMe Storage Disk"},{"lang":"ko","x_late":"펌웨어 - PCIe NVMe 스토리지 디스크"},{"lang":"cn","x_late":"固件 - PCIe NVMe存储磁盘"}]}],"description":[{"lang":"en","x_late":"This arm64 Smart Component provides firmware for the following drive models: VR000480KXNXE,VR000960KXNZU and VS001920KXNXF"}],"divisions":[{"key":"9","language":[{"lang":"tw","x_late":"儲存裝置"},{"lang":"en","x_late":"Storage"},{"lang":"ko","x_late":"스토리지"},{"lang":"ja","x_late":"ストレージ"},{"lang":"cn","x_late":"存储设备"}]}],"documentation":[{"lang":"en","x_late":"Deliverable Name:
\n Online HDD/SSD Flash Component for Linux (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives
Release Version and/or Date:
\n HPK3
\n"}],"files":[{"bytes":"4660486","datemodified":"2024-09-05T23:39:17","file_list":["libsetup.so","CP062949.xml","M7450ALLHPK3.rel","setup","payload.json"],"md5sum":"75e513f646eb468ad46d8a0b2528c84e","name":"CP062949.scexe","release":"2024-09-06T03:37:06","revision":"0","sha1sum":"b2a18d558dc77cf48cd024104c1952c34f97433f","size":"4MB","target_guids":["562340a5-3052-3030-3438-304b584e5845","562340a5-3052-3030-3936-304b584e5a55","562340a5-3053-3130-3932-304b584e5846"],"type_of_change":"1","version":"HPK3"}],"id":{"product":"2b379144fd3f4e8f9ae738e221692d85","version":"eb58456ed2fa4284ad782b848546dc3a"},"installation":{"command":"CP043255.scexe","command_params":"","install_caps":{"needuseracct":"no","silent":"yes"},"per_device_install_time_seconds":120,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後可能需要重新啟動，更新才會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot may be required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅이 필요할 수 있습니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。"},{"lang":"cn","x_late":"安装之后必须重启才能使更新生效并保持硬件稳定性。"}]}],"reboot_required":"no"},"installation_dependency":{"DependencyRequirement":[{"ListConditional":"AND","SubRequirements":[{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus servers firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus servers firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus server firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus server firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR408i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR408i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]}]}]},"installation_notes":[{"lang":"en","x_late":"
On DEB-based Linux system:
\n\nUpdating firmware by installing the deb:
\n\nUpdating firmware without installing the deb:
\n\nAdditional Information:
\n\nInstalling the firmware deb package does not update the firmware. It merely extracts the deb content to the local system. Updating the firmware on the local system requires following the above outlined steps.
\n"}],"manufacturer_name":[{"lang":"en","x_late":"Hewlett Packard Enterprise"},{"lang":"cn","x_late":"惠普企业"}],"name":[{"lang":"en","x_late":"Online HDD/SSD Flash Component for Linux deb (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives"}],"prerequisites":{"required_diskspace":{"size_kb":"4000"},"supported_devices":[{"id":"VS001920KXNXF","target_guid":"562340a5-3053-3130-3932-304b584e5846","type":"nvme"},{"id":"VR000480KXNXE","target_guid":"562340a5-3052-3030-3438-304b584e5845","type":"nvme"},{"id":"VR000960KXNZU","target_guid":"562340a5-3052-3030-3936-304b584e5a55","type":"nvme"}],"supported_operating_systems":[{"major":"22","minor":"04","name":"Ubuntu 22.04 LTS","platform":"ubuntu2204","sr":"OEM"},{"major":"24","minor":"04","name":"Ubuntu 24.04 LTS","platform":"ubuntu2404","sr":"OEM"}],"supported_platforms":false},"release_date":"2024-09-29T09:13:26","revision_history":[{"lang":"en","latest_enhancements_x_late":"","latest_fixes_x_late":""},{"curr_enhancements_x_late":"","curr_fixes_x_late":"Deliverable Name:
\n Online HDD/SSD Flash Component for Linux (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives
Release Version and/or Date:
\n HPK2
\n"}],"files":[{"bytes":"4365823","datemodified":"2024-09-06T00:02:17","file_list":["libsetup.so","CP062951.xml","SP54304KHPK2.rel","setup","payload.json"],"md5sum":"0d6d771f7d7f647a880538c729576245","name":"CP062951.scexe","release":"2024-09-06T04:00:05","revision":"0","sha1sum":"ff37784822007fe31ebb612a75d798b4717a28a7","size":"4MB","target_guids":["562340a5-3056-3330-3834-304b58574246","562340a5-3056-3730-3638-304b5857424c","562340a5-3056-3531-3336-304b5857424e"],"type_of_change":"1","version":"HPK2"}],"id":{"product":"97e906834cab4ba1a782cd801a68f13e","version":"9554ad8cd2fc4775ab6c60e794ac46e0"},"installation":{"command":"CP043255.scexe","command_params":"","install_caps":{"needuseracct":"no","silent":"yes"},"per_device_install_time_seconds":120,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後可能需要重新啟動，更新才會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot may be required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅이 필요할 수 있습니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。"},{"lang":"cn","x_late":"安装之后必须重启才能使更新生效并保持硬件稳定性。"}]}],"reboot_required":"no"},"installation_dependency":{"DependencyRequirement":[{"ListConditional":"AND","SubRequirements":[{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus servers firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus servers firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus server firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus server firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR408i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR408i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]}]}]},"installation_notes":[{"lang":"en","x_late":"
On DEB-based Linux system:
\n\nUpdating firmware by installing the deb:
\n\nUpdating firmware without installing the deb:
\n\nAdditional Information:
\n\nInstalling the firmware deb package does not update the firmware. It merely extracts the deb content to the local system. Updating the firmware on the local system requires following the above outlined steps.
\n"}],"manufacturer_name":[{"lang":"en","x_late":"Hewlett Packard Enterprise"},{"lang":"cn","x_late":"惠普企业"}],"name":[{"lang":"en","x_late":"Online HDD/SSD Flash Component for Linux deb (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives"}],"prerequisites":{"required_diskspace":{"size_kb":"4000"},"supported_devices":[{"id":"VV003840KXWBF","target_guid":"562340a5-3056-3330-3834-304b58574246","type":"nvme"},{"id":"VV007680KXWBL","target_guid":"562340a5-3056-3730-3638-304b5857424c","type":"nvme"},{"id":"VV015360KXWBN","target_guid":"562340a5-3056-3531-3336-304b5857424e","type":"nvme"}],"supported_operating_systems":[{"major":"22","minor":"04","name":"Ubuntu 22.04 LTS","platform":"ubuntu2204","sr":"OEM"},{"major":"24","minor":"04","name":"Ubuntu 24.04 LTS","platform":"ubuntu2404","sr":"OEM"}],"supported_platforms":false},"release_date":"2024-09-29T09:13:29","revision_history":[{"lang":"en","latest_enhancements_x_late":"","latest_fixes_x_late":""},{"curr_enhancements_x_late":"","curr_fixes_x_late":"Deliverable Name:
\n Online HDD/SSD Flash Component for Linux (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives
Release Version and/or Date:
\n HPK5
\n"}],"files":[{"bytes":"5501808","datemodified":"2024-09-05T22:49:20","file_list":["libsetup.so","KACM7ALEHPK5.rel","CP062946.xml","setup","payload.json"],"md5sum":"35f78428477cd8dac04405351f92adc5","name":"CP062946.scexe","release":"2024-09-06T02:47:06","revision":"0","sha1sum":"96b15ff77006a5fa24ff96a222270e3db2bfdfc7","size":"5MB","target_guids":["4d2340a5-3056-3330-3230-304c58554a4b","4d2340a5-3056-3630-3430-304c58554a4c","562340a5-3056-3330-3834-304c58554a45","562340a5-3056-3730-3638-304c58554a46","562340a5-3056-3531-3336-304c58554a48"],"type_of_change":"1","version":"HPK5"}],"id":{"product":"5fd6973f399648b5a19a88b5145387e6","version":"cab0bcb0ad3d4c98a9d59c7742754b50"},"installation":{"command":"CP043255.scexe","command_params":"","install_caps":{"needuseracct":"no","silent":"yes"},"per_device_install_time_seconds":120,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後可能需要重新啟動，更新才會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot may be required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅이 필요할 수 있습니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。"},{"lang":"cn","x_late":"安装之后必须重启才能使更新生效并保持硬件稳定性。"}]}],"reboot_required":"no"},"installation_dependency":{"DependencyRequirement":[{"ListConditional":"AND","SubRequirements":[{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus servers firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus servers firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus server firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus server firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR408i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR408i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]}]}]},"installation_notes":[{"lang":"en","x_late":"
On DEB-based Linux system:
\n\nUpdating firmware by installing the deb:
\n\nUpdating firmware without installing the deb:
\n\nAdditional Information:
\n\nInstalling the firmware deb package does not update the firmware. It merely extracts the deb content to the local system. Updating the firmware on the local system requires following the above outlined steps.
\n"}],"manufacturer_name":[{"lang":"en","x_late":"Hewlett Packard Enterprise"},{"lang":"cn","x_late":"惠普企业"}],"name":[{"lang":"en","x_late":"Online HDD/SSD Flash Component for Linux deb (arm64) - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Drives"}],"prerequisites":{"required_diskspace":{"size_kb":"4000"},"supported_devices":[{"id":"VV007680LXUJF","target_guid":"562340a5-3056-3730-3638-304c58554a46","type":"nvme"},{"id":"VV015360LXUJH","target_guid":"562340a5-3056-3531-3336-304c58554a48","type":"nvme"},{"id":"MV006400LXUJL","target_guid":"4d2340a5-3056-3630-3430-304c58554a4c","type":"nvme"},{"id":"VV003840LXUJE","target_guid":"562340a5-3056-3330-3834-304c58554a45","type":"nvme"},{"id":"MV003200LXUJK","target_guid":"4d2340a5-3056-3330-3230-304c58554a4b","type":"nvme"}],"supported_operating_systems":[{"major":"22","minor":"04","name":"Ubuntu 22.04 LTS","platform":"ubuntu2204","sr":"OEM"},{"major":"24","minor":"04","name":"Ubuntu 24.04 LTS","platform":"ubuntu2404","sr":"OEM"}],"supported_platforms":false},"release_date":"2024-09-29T09:13:20","revision_history":[{"lang":"en","latest_enhancements_x_late":"","latest_fixes_x_late":""},{"curr_enhancements_x_late":"","curr_fixes_x_late":"Deliverable Name:
\n Online HDD/SSD Flash Component for Linux (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives
Release Version and/or Date:
\n HPK2
\n"}],"files":[{"bytes":"4392120","datemodified":"2024-10-08T00:25:26","file_list":["./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1","./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/.cpq_package.inc","./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/.setup","./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/CP062481.xml","./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/SP54304KHPK2.rel","./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/hpsetup","./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/libsetup.so","./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/payload.json","./usr/lib/aarch64-linux-gnu/firmware-hdd-48624e387b-HPK2-1.1/setup","./usr/lib/aarch64-linux-gnu/hp-scexe-compat","./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP062481.scexe","./usr/lib/aarch64-linux-gnu/scexe-compat","./usr/lib/aarch64-linux-gnu/scexe-compat/CP062481.scexe"],"md5sum":"be04144fd52ccbf99ffd3c7fdbdcccaa","name":"firmware-hdd-48624e387b-HPK2-1.1.aarch64.rpm","release":"2024-10-08T04:18:07","revision":"0","sha1sum":"ea3c2f47f5cf4da4dbf0891f067f6e32ee624236","size":"4MB","target_guids":["562340a5-3056-3330-3834-304b58574246","562340a5-3056-3730-3638-304b5857424c","562340a5-3056-3531-3336-304b5857424e"],"type_of_change":"1","version":"HPK2"}],"id":{"product":"269c16a027cf4615b11236eebd3bee15","version":"b7726b87fd4b4752bb9ad6f31ffed174"},"installation":{"command":"CP043255.scexe","command_params":"","install_caps":{"needuseracct":"no","silent":"yes"},"per_device_install_time_seconds":120,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後可能需要重新啟動，更新才會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot may be required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅이 필요할 수 있습니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。"},{"lang":"cn","x_late":"安装之后必须重启才能使更新生效并保持硬件稳定性。"}]}],"reboot_required":"no"},"installation_dependency":{"DependencyRequirement":[{"ListConditional":"AND","SubRequirements":[{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus servers firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus servers firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus server firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus server firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR408i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR408i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]}]}]},"installation_notes":[{"lang":"en","x_late":"
On RPM-based Linux system:
\n\nUpdate firmware by installing the rpm:
\n\nUpdating firmware without installing the rpm:
\n\nAdditional Information:
\n\nInstalling the firmware rpm package does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
\n"}],"manufacturer_name":[{"lang":"en","x_late":"Hewlett Packard Enterprise"},{"lang":"cn","x_late":"惠普企业"}],"name":[{"lang":"en","x_late":"Online HDD/SSD Flash Component for Linux (arm64) - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Drives"}],"prerequisites":{"required_diskspace":{"size_kb":"4000"},"supported_devices":[{"id":"VV003840KXWBF","target_guid":"562340a5-3056-3330-3834-304b58574246","type":"nvme"},{"id":"VV007680KXWBL","target_guid":"562340a5-3056-3730-3638-304b5857424c","type":"nvme"},{"id":"VV015360KXWBN","target_guid":"562340a5-3056-3531-3336-304b5857424e","type":"nvme"}],"supported_operating_systems":[{"major":"9","minor":"0","name":"Red Hat Enterprise Linux 9 for ARM","platform":"red_hat_enterprise_linux_aarch64","sr":"OEM"},{"major":"15","minor":"0","name":"SUSE Linux Enterprise Server 15 for ARM","platform":"suse_linux_enterprise_server_aarch64","sr":"OEM"},{"major":"8","minor":"0","name":"Red Hat Enterprise Linux 8 Server for ARM","platform":"red_hat_enterprise_linux_ARM","sr":"OEM"}],"supported_platforms":false},"release_date":"2024-08-30T11:57:51","revision_history":[{"lang":"en","latest_enhancements_x_late":"","latest_fixes_x_late":""},{"curr_enhancements_x_late":"","curr_fixes_x_late":"This software package contains the following firmware versions:
\n\n| Mellanox Ethernet Only Adapters | \n\t\t\tFirmware Version | \n\t\t\tPSID | \n\t\t
| Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21) | \n\t\t\t26.41.1000 | \n\t\t\tMT_0000000575 | \n\t\t
pdating firmware with rpm installed:
\n\nUpdating firmware without installing rpm:
\n\nOn Secure Boot Enable mode:
\n\nThis product requires the Nvidia MFT Tools for your device and operating system to be installed before the firmware is updated on Secure Boot enable mode.
\nAlso, install the Nvidia (Mellanox) MFT tools and ensure the MST PCI module and MST PCI configuration module is loaded and running before attempting the firmware update on Secure Boot enable mode.
Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
\n
New features and changes included in version 26.41.1000:
\n\nThe following issues have been fixed in version 26.41.1000:
\n\nNote: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.
\n","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"R13","value":"HPE ProLiant Compute DL384 Gen12"},{"key":"R11","value":"HPE ProLiant RL300 Gen11"},{"key":"R12","value":"HPE ProLiant RL340 Gen11"}],"sw_keys":[{"name":"MT_0000000575","sw_key_expectedpath":"firmware:nic_mlnx_mcx631102as_adat"}],"upgrade_requirements":"Recommended"}},{"DeviceClass":"4149ebb7-d64b-4654-b679-4280f349ea50","Devices":{"Device":[{"DeviceName":"UBM6 Backplane PIC","FirmwareImages":[{"DelayAfterInstallSec":0,"DirectFlashOk":true,"FileName":"HPE_UBM6_1.04_B.HPb","InstallDurationSec":600,"Order":1,"PLDMImage":true,"ResetRequired":false,"ServerPowerOff":false,"SysPowerON":true,"Type":"Firmware","UefiFlashable":true}],"Target":"9675b54e-1c96-44c3-a7a1-901506000000","Version":"1.04"}]},"PackageFormat":"FWPKG-v2","Type":"Firmware","UpdatableBy":["Bmc"],"package":{"category":[{"key":"2900027","languages":[{"lang":"tw","x_late":"韌體 ─ 系統"},{"lang":"en","x_late":"Firmware - System"},{"lang":"ko","x_late":"펌웨어 - 시스템"},{"lang":"ja","x_late":"ファームウェア - システム"},{"lang":"cn","x_late":"固件 - 系统 ROM"}]}],"description":[{"lang":"en","x_late":"This firmware package contains PLDM firmware for UBM6 storage backplanes."},{"lang":"ja","x_late":"このファームウェアパッケージには、UBM6ストレージバックプレーンのPLDMファームウェアが含まれています。"}],"divisions":[{"key":"68","language":[{"lang":"en","x_late":"ServerOptions"},{"lang":"ko","x_late":"서버 옵션"},{"lang":"ja","x_late":"サーバ オプション"},{"lang":"cn","x_late":"服务器选项"}]},{"key":"6","language":[{"lang":"tw","x_late":"伺服器"},{"lang":"en","x_late":"Server"},{"lang":"ko","x_late":"서버"},{"lang":"ja","x_late":"サーバ"},{"lang":"cn","x_late":"服务器"}]}],"documentation":[],"files":[{"bytes":"130647","datemodified":"2024-09-13T05:05:16","file_list":["HPE_UBM6_1.04_B.HPb","HPE_UBM6_1.04_B.xml","payload.json"],"md5sum":"a2dfc5c1a6cd94bb809c1d77e40ee094","name":"HPE_UBM6_1.04_B.fwpkg","release":"2024-09-13T05:01:25","revision":"0","sha1sum":"c8a43b9709c2efba581f9a200738ec132cac72b0","size":"127KB","target_guids":["9675b54e-1c96-44c3-a7a1-901506000000"],"type_of_change":"1","version":"1.04"}],"id":{"product":"923bb6bba3254a6d80257c1bf056f39d","version":"15821a7ed6cf4e2fb9d903aa230d87ff"},"installation":{"command":"","command_params":"","install_caps":{"needuseracct":"no","silent":"yes"},"per_device_install_time_seconds":600,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後無需重新啟動，更新就會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot is not required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"설치 후 재부팅하지 않아도 업데이트가 적용되고 하드웨어 안정성이 유지됩니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要ありません。"},{"lang":"cn","x_late":"安装之后无需重启即可使更新生效并可保持硬件稳定性。"}]}],"reboot_required":"no"},"installation_dependency":{"DependencyRequirement":[{"ListConditional":"AND","SubRequirements":[{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.22.3-4597 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4597","description":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.22.3-4597 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 SR308i-o/SR308i-p controller firmware version 5.32 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"5.32","description":"HPE Gen11 SR308i-o/SR308i-p controller firmware version 5.32 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 SR308i-o/SR308i-p controller firmware version 5.32 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"5.32","description":"HPE Gen11 SR308i-o/SR308i-p controller firmware version 5.32 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.14.062","description":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.14.062","description":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.14.062","description":"HPE Gen11 SR416i-o/SR932i-p controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-o Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4597","description":"HPE MR216i-o Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4597","description":"HPE MR216i-p Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen10 Plus/Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4597","description":"HPE MR216i-p Gen10 Plus/Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR408i-o Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4597","description":"HPE MR408i-o Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen10 Plus/Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4597","description":"HPE MR416i-p Gen10 Plus/Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-o Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4597","description":"HPE MR416i-o Gen11 Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-a Gen10 Plus Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4650","description":"HPE MR416i-a Gen10 Plus Tri Mode controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.22.3-4650","description":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.22.3 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 SR308i-o/SR308i-p controller firmware version 5.32 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"5.32","description":"HPE Gen11 SR308i-o/SR308i-p controller firmware version 5.32 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus Controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.14.062","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus Controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus Controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.14.062","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus Controller firmware version 03.01.14.062 or greater is required and should be already active for firmware update. Update the firmware and reboot before attempting firmware update."}]}]}]},"installation_notes":[{"lang":"en","x_late":"Flash the PLDM firmware using any below methods
\n\n1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
\n\n localhost OS example:
\n ilorest flashfwpkg <file_name.fwpkg>
remote example:
\n ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
\n\nSupplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
\n\nPlace the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
\n\tPlace the desired firmware packages and components to be updated in the directory "\\packages" on the USB key.
\n\tUpdate the firmware and software in the usual manner.
\n\n3. Flash from iLO GUI
\n\nSupport RL300 Gen11 server and Gen12 servers.
\n","curr_fixes_x_late":"","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"A43","value":"HPE ProLiant DL345 Gen10 Plus Server"},{"key":"A42","value":"HPE ProLiant DL385 Gen10 Plus v2 Server"},{"key":"A42","value":"HPE ProLiant DL365 Gen10 Plus Server"},{"key":"U54","value":"HPE ProLiant DL360 Gen11 Server"},{"key":"U32","value":"HPE ProLiant DL360 Gen10 Server"},{"key":"U46","value":"HPE ProLiant with vSphere Distributed Services Engine"},{"key":"A55","value":"HPE ProLiant DL365 Gen11 Server"},{"key":"U68","value":"HPE ProLiant ML350 Gen12 Server"},{"key":"U54","value":"HPE ProLiant ML350 Gen11 Server"},{"key":"U69","value":"HPE ProLiant Compute DL320 Gen12 SP Server"},{"key":"U63","value":"HPE ProLiant DL320 Gen11 Server"},{"key":"A43","value":"HPE ProLiant DL325 Gen10 Plus v2 Server"},{"key":"R11","value":"HPE ProLiant RL300 Gen11"},{"key":"U54","value":"HPE ProLiant DL380 Gen11 Server"},{"key":"I45","value":"HPE Synergy 480 Gen11 Compute Module"},{"key":"U58","value":"HPE ProLiant DL380a Gen11"},{"key":"U30","value":"HPE ProLiant DL380 Gen10 Server"},{"key":"","value":"HPE ProLiant DL580 Gen12"},{"key":"U68","value":"HPE ProLiant DL380 Gen12 Server"},{"key":"U59","value":"HPE ProLiant DL560 Gen11 Server"},{"key":"U71","value":"HPE ProLiant Compute DL320 Gen12 Server"},{"key":"A55","value":"HPE ProLiant DL385 Gen11 Server"},{"key":"A56","value":"HPE ProLiant DL325 Gen11 Server"},{"key":"A56","value":"HPE ProLiant DL345 Gen11 Server"},{"key":"U46","value":"HPE ProLiant DL380 Gen10 Plus Server"},{"key":"U46","value":"HPE ProLiant DL360 Gen10 Plus Server"},{"key":"U71","value":"HPE ProLiant Compute DL340 Gen12 Server"},{"key":"U68","value":"HPE ProLiant DL360 Gen12 Server"},{"key":"U63","value":"HPE ProLiant ML110 Gen11 Server"}],"sw_keys":[{"name":"UBM6PIC","sw_key_expectedpath":"firmware:sd:ubm"}],"upgrade_requirements":"Recommended"}},{"DeviceClass":"","Devices":{"Device":[]},"Type":"Firmware","UpdatableBy":["RuntimeAgent"],"package":{"category":[{"key":"2900095","languages":[{"lang":"fr","x_late":"Micrologiciel - Réseau"},{"lang":"en","x_late":"Firmware - Network"},{"lang":"cn","x_late":"固件 - 网络"},{"lang":"tw","x_late":"韌體 ─ 網路"},{"lang":"de","x_late":"Firmware - Netzwerk"},{"lang":"ko","x_late":"펌웨어 - 네트워크"},{"lang":"it","x_late":"Firmware - Rete"},{"lang":"ja","x_late":"ファームウェア - ネットワーク"},{"lang":"es","x_late":"Firmware - Red"}]}],"description":[{"lang":"en","x_late":"This package contains the utilities and binary for upgrading HPE MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter firmware on ARM Linux Operating Systems."}],"divisions":[{"key":"6","language":[{"lang":"tw","x_late":"伺服器"},{"lang":"en","x_late":"Server"},{"lang":"ko","x_late":"서버"},{"lang":"ja","x_late":"サーバ"},{"lang":"cn","x_late":"服务器"}]},{"key":"65","language":[{"lang":"tw","x_late":"網路"},{"lang":"en","x_late":"Networking"},{"lang":"ko","x_late":"네트워킹"},{"lang":"ja","x_late":"ネットワーク"},{"lang":"cn","x_late":"网络"}]}],"documentation":[{"lang":"en","x_late":"This software package contains the following firmware versions:
\n\n| Mellanox Ethernet Only Adapters | \n\t\t\tFirmware Version | \n\t\t\tPSID | \n\t\t
| Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21) | \n\t\t\t22.41.1000 | \n\t\t\tMT_0000000437 | \n\t\t
Updating firmware with rpm installed:
\n\nOn Secure Boot Enable mode:
\n\nThis product requires the Nvidia MFT Tools for your device and operating system to be installed before the firmware is updated on Secure Boot enable mode.
\nAlso, install the Nvidia (Mellanox) MFT tools and ensure the MST PCI module and MST PCI configuration module is loaded and running before attempting the firmware update on Secure Boot enable mode.
Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
\n\n\n\n
New features and changes included in version 22.41.1000:
\n\nThe following issues have been fixed in version 22.41.1000:
\n\nNote: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.
\n","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"R13","value":"HPE ProLiant Compute DL384 Gen12"},{"key":"R11","value":"HPE ProLiant RL300 Gen11"},{"key":"R12","value":"HPE ProLiant RL340 Gen11"}],"sw_keys":[{"name":"MT_0000000437","sw_key_expectedpath":"firmware:nic_mlnx_mcx623106as_cdat"}],"upgrade_requirements":"Recommended"}},{"DeviceClass":"e7a8b7dd-a6c0-4056-b14a-97bc423ddc7b","Devices":{"Device":[]},"Type":"Software","UpdatableBy":["RuntimeAgent"],"package":{"category":[{"key":"7800026","languages":[{"lang":"tw","x_late":"軟體 - 管理"},{"lang":"en","x_late":"Software - Management"},{"lang":"ko","x_late":"소프트웨어 - 관리"},{"lang":"ja","x_late":"ソフトウェア - マネジメント"},{"lang":"cn","x_late":"软件 - 管理"}]}],"description":[{"lang":"en","x_late":"amsd for Ubuntu 22.04 LTS aarch64"}],"divisions":[{"key":"6","language":[{"lang":"tw","x_late":"伺服器"},{"lang":"en","x_late":"Server"},{"lang":"ko","x_late":"서버"},{"lang":"ja","x_late":"サーバ"},{"lang":"cn","x_late":"服务器"}]}],"documentation":[],"files":[],"id":{"product":"e8927123b15f4b749e7264389a03efcf","version":"7f943b04c95146ec8fce5b5dc3ff0806"},"installation":{"command":"","command_params":"","install_caps":{},"per_device_install_time_seconds":0,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後可能需要重新啟動，更新才會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot may be required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅이 필요할 수 있습니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。"},{"lang":"cn","x_late":"安装之后必须重启才能使更新生效并保持硬件稳定性。"}]}],"reboot_required":"no"},"installation_dependency":{},"installation_notes":[{"lang":"en","x_late":"Download the component and run the command "dpkg -i amsd_3.1.0-1748-jammy_arm64.deb"
\n"}],"manufacturer_name":[],"name":[{"lang":"en","x_late":"amsd for Ubuntu 22.04 LTS aarch64"},{"lang":"ja","x_late":"Ubuntu 22.04 LTS aarch64用のamsd"}],"prerequisites":{"required_diskspace":{"size_kb":"0"},"supported_operating_systems":[{"major":"22","minor":"04","name":"Ubuntu 22.04 LTS","platform":"ubuntu2204","sr":"OEM"}],"supported_platforms":false},"release_date":"2024-10-03T07:11:53","revision_history":[{"lang":"en","latest_enhancements_x_late":"","latest_fixes_x_late":""},{"curr_enhancements_x_late":"AMS qualification of HPE ProLiant Compute DL384 Gen12 Server
\n","curr_fixes_x_late":"Fix for amsd crashing upon hot-add/remove of non-nvme local drives.
\n","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"R13","value":"HPE ProLiant Compute DL384 Gen12"},{"key":"R11","value":"HPE ProLiant RL300 Gen11"}],"sw_keys":[],"upgrade_requirements":"Optional"}},{"DeviceClass":"2f317b9d-c9e3-4d76-bff6-b9d0d085a952","Devices":{"Device":[{"DeviceName":"iLO 6","FirmwareImages":[{"DelayAfterInstallSec":120,"DirectFlashOk":true,"FileName":"ilo6_165.bin","InstallDurationSec":600,"Order":1,"PLDMImage":false,"ResetRequired":false,"ServerPowerOff":false,"SysPowerON":false,"Type":"Firmware","UefiFlashable":true}],"Target":"e6d3c844-14a6-4f1f-84a3-c06013910406","Version":"1.65"},{"DeviceName":"iLO 6","FirmwareImages":[{"DelayAfterInstallSec":120,"DirectFlashOk":true,"FileName":"ilo6_165.bin","InstallDurationSec":600,"Order":1,"PLDMImage":false,"ResetRequired":false,"ServerPowerOff":false,"SysPowerON":false,"Type":"Firmware","UefiFlashable":true}],"Target":"e6d3c844-14a6-4f1f-84a3-c06013910306","Version":"1.65"},{"DeviceName":"iLO 6","FirmwareImages":[{"DelayAfterInstallSec":120,"DirectFlashOk":true,"FileName":"ilo6_165.bin","InstallDurationSec":600,"Order":1,"PLDMImage":false,"ResetRequired":false,"ServerPowerOff":false,"SysPowerON":false,"Type":"Firmware","UefiFlashable":true}],"Target":"e6d3c844-14a6-4f1f-84a3-c06013910206","Version":"1.65"},{"DeviceName":"iLO 6","FirmwareImages":[{"DelayAfterInstallSec":120,"DirectFlashOk":true,"FileName":"ilo6_165.bin","InstallDurationSec":600,"Order":1,"PLDMImage":false,"ResetRequired":false,"ServerPowerOff":false,"SysPowerON":false,"Type":"Firmware","UefiFlashable":true}],"Target":"e6d3c844-14a6-4f1f-84a3-c06013910106","Version":"1.65"},{"DeviceName":"iLO 6","FirmwareImages":[{"DelayAfterInstallSec":120,"DirectFlashOk":true,"FileName":"ilo6_165.bin","InstallDurationSec":600,"Order":1,"PLDMImage":false,"ResetRequired":false,"ServerPowerOff":false,"SysPowerON":false,"Type":"Firmware","UefiFlashable":true}],"Target":"e6d3c844-14a6-4f1f-84a3-c06013910006","Version":"1.65"}]},"PackageFormat":"FWPKG-v2","Type":"ComboFirmware","UpdatableBy":["Bmc"],"package":{"category":[{"key":"2900213","languages":[{"lang":"fr","x_late":"Micrologiciel - Lights-Out Management"},{"lang":"en","x_late":"Firmware - Lights-Out Management"},{"lang":"cn","x_late":"固件 - Lights-Out Management"},{"lang":"tw","x_late":"韌體 ─ Lights─Out 管理"},{"lang":"de","x_late":"Firmware - LOM (Lights-Out Management)"},{"lang":"ko","x_late":"펌웨어 - Lights-Out 관리"},{"lang":"ja","x_late":"ファームウェア - Lights-Outマネジメント"},{"lang":"es","x_late":"Firmware - Administración de apagado eléctrico"}]}],"description":[{"lang":"en","x_late":"This component provides updated iLO firmware that can be installed directly on supported Operating Systems. This component can also be used to obtain the firmware image for updating via iLO user interface, utilities, or through the scripting interface. Additionally, this component can be used with the Smart Update Manager."}],"divisions":[{"key":"6","language":[{"lang":"tw","x_late":"伺服器"},{"lang":"en","x_late":"Server"},{"lang":"ko","x_late":"서버"},{"lang":"ja","x_late":"サーバ"},{"lang":"cn","x_late":"服务器"}]},{"key":"64","language":[{"lang":"tw","x_late":"Lights-Out"},{"lang":"en","x_late":"Lights Out"}]}],"documentation":[{"lang":"en","x_late":"\n\n
iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
\n
\nhttp://www.hpe.com/info/ilo-docs
\n
\nSelect your lights-out product, then support & documents, then manuals.
To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
\n\nlocalhost OS example:
\nilorest flashfwpkg <file_name.fwpkg>
remote example:
\nilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
\n\nSupplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
\n\nUpdate the firmware and software in the usual manner.
\n"}],"manufacturer_name":[{"lang":"en","x_late":"Hewlett Packard Enterprise"},{"lang":"cn","x_late":"惠普企业"}],"name":[{"lang":"en","x_late":"Online ROM Flash Firmware Package - HPE Integrated Lights-Out 6"}],"prerequisites":{"required_diskspace":{"size_kb":"70000"},"supported_devices":[{"id":"2f317b9d-c9e3-4d76-bff6-b9d0d085a952","target_guid":"","type":"other"},{"dev":"3307","subdev":"00E4","subven":"1590","target_guid":"a6b1a447-382a-5a4f-103c-3307159000e4","type":"pci","ven":"103c"},{"dev":"3306","subdev":"00E4","subven":"1590","target_guid":"a6b1a447-382a-5a4f-103c-3306159000e4","type":"pci","ven":"103c"}],"supported_operating_systems":[{"major":"0","minor":"0","name":"Cross Operating System","platform":"oi","sr":"OEM"},{"major":"7","minor":"0","name":"VMware ESXi 7.0","platform":"vmware_esx_server","sr":"OEM"},{"major":"8","minor":"0","name":"VMware ESXi 8.0","platform":"vmware_esx_server","sr":"OEM"}],"supported_platforms":false},"release_date":"2024-11-14T05:23:32","revision_history":[{"lang":"en","latest_enhancements_x_late":"Initial Build
\n","curr_fixes_x_late":"Initial Build
\n","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"U54","value":"HPE ProLiant DL360 Gen11 Server"},{"key":"U65","value":"HPE ProLiant DL20 Gen11"},{"key":"A55","value":"HPE ProLiant DL365 Gen11 Server"},{"key":"U54","value":"HPE ProLiant ML350 Gen11 Server"},{"key":"U57","value":"HPE Alletra Storage Server 4140"},{"key":"U63","value":"HPE ProLiant DL320 Gen11 Server"},{"key":"R11","value":"HPE ProLiant RL300 Gen11"},{"key":"U54","value":"HPE ProLiant DL380 Gen11 Server"},{"key":"I45","value":"HPE Synergy 480 Gen11 Compute Module"},{"key":"U58","value":"HPE ProLiant DL380a Gen11"},{"key":"A58","value":"HPE ProLiant DL145 Gen11"},{"key":"U59","value":"HPE ProLiant DL560 Gen11 Server"},{"key":"U65","value":"HPE ProLiant ML30 Gen11"},{"key":"A55","value":"HPE ProLiant DL385 Gen11 Server"},{"key":"A56","value":"HPE ProLiant DL325 Gen11 Server"},{"key":"A56","value":"HPE ProLiant DL345 Gen11 Server"},{"key":"U58","value":"HPE Alletra 4110 Server"},{"key":"U70","value":"HPE ProLiant DL380a Gen12"},{"key":"U69","value":"HPE ProLiant Compute DL320 Gen12 SP Server"},{"key":"U62","value":"HPE ProLiant DL110 Gen11 Server"},{"key":"U63","value":"HPE ProLiant ML110 Gen11 Server"},{"key":"U58","value":"HPE Alletra Storage Server 4120"},{"key":"U69","value":"HPE ProLiant Compute DL340 Gen12 SP Server"}],"sw_keys":[{"name":"RI12","sw_key_expectedpath":"firmware:ilo6"}],"upgrade_requirements":"Optional"}},{"DeviceClass":"","Devices":{"Device":[]},"Type":"Firmware","UpdatableBy":["RuntimeAgent"],"package":{"category":[{"key":"2900095","languages":[{"lang":"fr","x_late":"Micrologiciel - Réseau"},{"lang":"en","x_late":"Firmware - Network"},{"lang":"cn","x_late":"固件 - 网络"},{"lang":"tw","x_late":"韌體 ─ 網路"},{"lang":"de","x_late":"Firmware - Netzwerk"},{"lang":"ko","x_late":"펌웨어 - 네트워크"},{"lang":"it","x_late":"Firmware - Rete"},{"lang":"ja","x_late":"ファームウェア - ネットワーク"},{"lang":"es","x_late":"Firmware - Red"}]}],"description":[{"lang":"en","x_late":"This package contains the utilities and binary for upgrading Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE firmware on ARM Linux Operating Systems."},{"lang":"ja","x_late":"このパッケージには、ARM Linuxオペレーティングシステム上でMellanox MCX631432AS-ADAI Ethernet 10/25Gb 2ポートSFP28 OCP3アダプターのHPEファームウェアをアップグレードするためのユーティリティとバイナリが含まれています。"}],"divisions":[{"key":"6","language":[{"lang":"tw","x_late":"伺服器"},{"lang":"en","x_late":"Server"},{"lang":"ko","x_late":"서버"},{"lang":"ja","x_late":"サーバ"},{"lang":"cn","x_late":"服务器"}]},{"key":"65","language":[{"lang":"tw","x_late":"網路"},{"lang":"en","x_late":"Networking"},{"lang":"ko","x_late":"네트워킹"},{"lang":"ja","x_late":"ネットワーク"},{"lang":"cn","x_late":"网络"}]}],"documentation":[{"lang":"en","x_late":"This software package contains the following firmware versions:
\n\n| Mellanox Ethernet Only Adapters | \n\t\t\tFirmware Version | \n\t\t\tPSID | \n\t\t
| Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P42041-B21) | \n\t\t\t26.41.1000 | \n\t\t\tMT_0000000551 | \n\t\t
\n"}],"files":[],"id":{"product":"2cea1aa2095a4bf8996d2ce3b06a524f","version":"dd2189d0274a4dd680c9522bbcd89362"},"installation":{"command":"","command_params":"","install_caps":{"needuseracct":"no","silent":"no"},"per_device_install_time_seconds":600,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後必須重新啟動，更新才會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot is required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅해야 합니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。"},{"lang":"cn","x_late":"安装之后必须重启才能使更新生效并保持硬件稳定性。"}]}],"reboot_required":"yes"},"installation_dependency":{},"installation_notes":[{"lang":"en","x_late":"
Updating firmware with rpm installed:
\n\nOn Secure Boot Enable mode:
\n\nThis product requires the Nvidia MFT Tools for your device and operating system to be installed before the firmware is updated on Secure Boot enable mode.
\nAlso, install the Nvidia (Mellanox) MFT tools and ensure the MST PCI module and MST PCI configuration module is loaded and running before attempting the firmware update on Secure Boot enable mode.
Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
\n
New features and changes included in version 26.41.1000:
\n\nThe following issues have been fixed in version 26.41.1000:
\n\nNote: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.
\n","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"R13","value":"HPE ProLiant Compute DL384 Gen12"},{"key":"R11","value":"HPE ProLiant RL300 Gen11"},{"key":"R12","value":"HPE ProLiant RL340 Gen11"}],"sw_keys":[{"name":"MT_0000000551","sw_key_expectedpath":"firmware:nic_mlnx_mcx631432as_adai"}],"upgrade_requirements":"Recommended"}},{"DeviceClass":"F6DE0320-2E0F-489A-B238-6DD8AE7C3811","Devices":{"Device":[{"DeviceName":"VR000480KXNXE","FirmwareImages":[{"DelayAfterInstallSec":10,"DirectFlashOk":false,"FileName":"M7450ALLHPK3.rel","InstallDurationSec":300,"Order":1,"ResetRequired":false,"Type":"Firmware","UefiFlashable":false}],"Target":"562340a5-3052-3030-3438-304b584e5845","Version":"HPK3"},{"DeviceName":"VR000960KXNZU","FirmwareImages":[{"DelayAfterInstallSec":10,"DirectFlashOk":false,"FileName":"M7450ALLHPK3.rel","InstallDurationSec":300,"Order":1,"ResetRequired":false,"Type":"Firmware","UefiFlashable":false}],"Target":"562340a5-3052-3030-3936-304b584e5a55","Version":"HPK3"},{"DeviceName":"VS001920KXNXF","FirmwareImages":[{"DelayAfterInstallSec":10,"DirectFlashOk":false,"FileName":"M7450ALLHPK3.rel","InstallDurationSec":300,"Order":1,"ResetRequired":false,"Type":"Firmware","UefiFlashable":false}],"Target":"562340a5-3053-3130-3932-304b584e5846","Version":"HPK3"}]},"Type":"Firmware","UpdatableBy":["RuntimeAgent"],"package":{"category":[{"key":"2900357","languages":[{"lang":"tw","x_late":"韌體 - PCIe NVMe 儲存磁碟"},{"lang":"en","x_late":"Firmware - PCIe NVMe Storage Disk"},{"lang":"ko","x_late":"펌웨어 - PCIe NVMe 스토리지 디스크"},{"lang":"cn","x_late":"固件 - PCIe NVMe存储磁盘"}]}],"description":[{"lang":"en","x_late":"This arm64 Smart Component provides firmware for the following drive models: VR000480KXNXE,VR000960KXNZU and VS001920KXNXF"}],"divisions":[{"key":"9","language":[{"lang":"tw","x_late":"儲存裝置"},{"lang":"en","x_late":"Storage"},{"lang":"ko","x_late":"스토리지"},{"lang":"ja","x_late":"ストレージ"},{"lang":"cn","x_late":"存储设备"}]}],"documentation":[{"lang":"en","x_late":"Deliverable Name:
\n Online HDD/SSD Flash Component for Linux (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives
Release Version and/or Date:
\n HPK3
\n"}],"files":[{"bytes":"4685542","datemodified":"2024-10-07T23:40:37","file_list":["./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1","./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/.cpq_package.inc","./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/.setup","./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/CP062480.xml","./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/M7450ALLHPK3.rel","./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/hpsetup","./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/libsetup.so","./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/payload.json","./usr/lib/aarch64-linux-gnu/firmware-hdd-2ba844ae8c-HPK3-1.1/setup","./usr/lib/aarch64-linux-gnu/hp-scexe-compat","./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP062480.scexe","./usr/lib/aarch64-linux-gnu/scexe-compat","./usr/lib/aarch64-linux-gnu/scexe-compat/CP062480.scexe"],"md5sum":"e3f14d43f9eedd784723a12070b50a80","name":"firmware-hdd-2ba844ae8c-HPK3-1.1.aarch64.rpm","release":"2024-10-08T03:33:06","revision":"0","sha1sum":"6c945791c754894a62a1cedb391a18b8180ee5dd","size":"4MB","target_guids":["562340a5-3052-3030-3438-304b584e5845","562340a5-3052-3030-3936-304b584e5a55","562340a5-3053-3130-3932-304b584e5846"],"type_of_change":"1","version":"HPK3"}],"id":{"product":"dfeda317932a458eb967353b53eff149","version":"fb1035fad60c4b2d81e65a2761f4a429"},"installation":{"command":"CP043255.scexe","command_params":"","install_caps":{"needuseracct":"no","silent":"yes"},"per_device_install_time_seconds":120,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後可能需要重新啟動，更新才會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot may be required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅이 필요할 수 있습니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。"},{"lang":"cn","x_late":"安装之后必须重启才能使更新生效并保持硬件稳定性。"}]}],"reboot_required":"no"},"installation_dependency":{"DependencyRequirement":[{"ListConditional":"AND","SubRequirements":[{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus servers firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus servers firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-a Gen10 Plus Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus server firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-p Gen10 Plus Tri Mode Controller with Gen10 and Gen10 Plus server firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"6.22","description":"HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, E208i-p, E208e-p, E208i-c, E208i-a, P408e-m, P204i-c, P416ie-m and P816i-a SR Gen10 and Gen11 controllers firmware version 6.22 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR408i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR408i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-o Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR216i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR216i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"03.01.23.072","description":"HPE SR932i-p Gen10 Plus /SR416i-a Gen10 Plus/SR932i-p Gen11/SR416ie-m Gen11 Controllers firmware version 03.01.23.072 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"1.2.14.1009","description":"HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r firmware version 1.2.14.1009 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]},{"ListConditional":"OR","Requirement":[{"Condition":"AlreadyActive","DeviceGuid":"","Message":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update.","OSVersion":{},"RequirementGUID":"","ServerModel":["*"],"Target_guids":[],"Type":"GTE","Version":"52.24.3-4948","description":"HPE MR416i-p Gen11 Tri Mode Controller firmware version 52.24.3-4948 or greater is required and should be already active for fwpkg driver update. Update the firmware and reboot before attempting firmware update."}]}]}]},"installation_notes":[{"lang":"en","x_late":"
On RPM-based Linux system:
\n\nUpdate firmware by installing the rpm:
\n\nUpdating firmware without installing the rpm:
\n\nAdditional Information:
\n\nInstalling the firmware rpm package does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
\n"}],"manufacturer_name":[{"lang":"en","x_late":"Hewlett Packard Enterprise"},{"lang":"cn","x_late":"惠普企业"}],"name":[{"lang":"en","x_late":"Online HDD/SSD Flash Component for Linux (arm64) - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Drives"}],"prerequisites":{"required_diskspace":{"size_kb":"4000"},"supported_devices":[{"id":"VS001920KXNXF","target_guid":"562340a5-3053-3130-3932-304b584e5846","type":"nvme"},{"id":"VR000480KXNXE","target_guid":"562340a5-3052-3030-3438-304b584e5845","type":"nvme"},{"id":"VR000960KXNZU","target_guid":"562340a5-3052-3030-3936-304b584e5a55","type":"nvme"}],"supported_operating_systems":[{"major":"9","minor":"0","name":"Red Hat Enterprise Linux 9 for ARM","platform":"red_hat_enterprise_linux_aarch64","sr":"OEM"},{"major":"15","minor":"0","name":"SUSE Linux Enterprise Server 15 for ARM","platform":"suse_linux_enterprise_server_aarch64","sr":"OEM"},{"major":"8","minor":"0","name":"Red Hat Enterprise Linux 8 Server for ARM","platform":"red_hat_enterprise_linux_ARM","sr":"OEM"}],"supported_platforms":false},"release_date":"2024-08-30T11:06:03","revision_history":[{"lang":"en","latest_enhancements_x_late":"","latest_fixes_x_late":""},{"curr_enhancements_x_late":"","curr_fixes_x_late":"Deliverable Name:
\n Online NVMe SSD Flash Component for Linux (arm64) - VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives
\n
\nRelease Version and/or Date:
\n HPK5
\n"}],"files":[{"bytes":"6061356","datemodified":"2024-10-07T23:18:33","file_list":["./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1","./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/.cpq_package.inc","./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/.setup","./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/CP062044.xml","./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/GPM173XAHPK5.rel","./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/hpsetup","./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/libsetup.so","./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/payload.json","./usr/lib/aarch64-linux-gnu/firmware-hdd-a27c95663d-HPK5-1.1/setup","./usr/lib/aarch64-linux-gnu/hp-scexe-compat","./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP062044.scexe","./usr/lib/aarch64-linux-gnu/scexe-compat","./usr/lib/aarch64-linux-gnu/scexe-compat/CP062044.scexe"],"md5sum":"c871bc0c653a3b192be637c7436df1b3","name":"firmware-hdd-a27c95663d-HPK5-1.1.aarch64.rpm","release":"2024-10-08T03:10:26","revision":"0","sha1sum":"877a69472d97ac9ca515e0c75fa8de0800ce5612","size":"5MB","target_guids":["562340a5-304f-3130-3932-304b59444d54","562340a5-304f-3330-3834-304b59444d56","4d2340a5-304f-3130-3630-304b59444d55","4d2340a5-304f-3330-3230-304b59444e43","4d2340a5-304f-3630-3430-304b59444e44","562340a5-304f-3730-3638-304b59444e41","562340a5-304f-3531-3336-304b59444e42"],"type_of_change":"1","version":"HPK5"}],"id":{"product":"ecec706965b04c0d93b1cd8a95470b7c","version":"be26b6b5e1f544e1b922ea0793bd4d1f"},"installation":{"command":"CP041864.scexe","command_params":"","install_caps":{"needuseracct":"no","silent":"yes"},"per_device_install_time_seconds":120,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後可能需要重新啟動，更新才會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot may be required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅이 필요할 수 있습니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。"},{"lang":"cn","x_late":"安装之后必须重启才能使更新生效并保持硬件稳定性。"}]}],"reboot_required":"no"},"installation_dependency":{},"installation_notes":[{"lang":"en","x_late":"
On RPM-based Linux system:
\n\nUpdate firmware by installing the rpm:
\n\nUpdating firmware without installing the rpm:
\n\nAdditional Information:
\n\nInstalling the firmware rpm package does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
\n"}],"manufacturer_name":[{"lang":"en","x_late":"Hewlett Packard Enterprise"},{"lang":"cn","x_late":"惠普企业"}],"name":[{"lang":"en","x_late":"Online NVMe SSD Flash Component for Linux (arm64) - VO001920KYDMT, VO003840KYDMV, MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO007680KYDNA and VO015360KYDNB Drives"}],"prerequisites":{"required_diskspace":{"size_kb":"4000"},"supported_devices":[{"id":"MO001600KYDMU","target_guid":"4d2340a5-304f-3130-3630-304b59444d55","type":"nvme"},{"id":"MO006400KYDND","target_guid":"4d2340a5-304f-3630-3430-304b59444e44","type":"nvme"},{"id":"VO015360KYDNB","target_guid":"562340a5-304f-3531-3336-304b59444e42","type":"nvme"},{"id":"VO007680KYDNA","target_guid":"562340a5-304f-3730-3638-304b59444e41","type":"nvme"},{"id":"MO003200KYDNC","target_guid":"4d2340a5-304f-3330-3230-304b59444e43","type":"nvme"},{"id":"VO001920KYDMT","target_guid":"562340a5-304f-3130-3932-304b59444d54","type":"nvme"},{"id":"VO003840KYDMV","target_guid":"562340a5-304f-3330-3834-304b59444d56","type":"nvme"}],"supported_operating_systems":[{"major":"9","minor":"0","name":"Red Hat Enterprise Linux 9 for ARM","platform":"red_hat_enterprise_linux_aarch64","sr":"OEM"},{"major":"15","minor":"0","name":"SUSE Linux Enterprise Server 15 for ARM","platform":"suse_linux_enterprise_server_aarch64","sr":"OEM"},{"major":"8","minor":"0","name":"Red Hat Enterprise Linux 8 Server for ARM","platform":"red_hat_enterprise_linux_ARM","sr":"OEM"}],"supported_platforms":false},"release_date":"2024-07-28T15:05:05","revision_history":[{"lang":"en","latest_enhancements_x_late":"","latest_fixes_x_late":""},{"curr_enhancements_x_late":"","curr_fixes_x_late":"This software package contains the following firmware versions:
\n\n| Mellanox Ethernet Only Adapters | \n\t\t\tFirmware Version | \n\t\t\tPSID | \n\t\t
| Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21) | \n\t\t\t22.41.1000 | \n\t\t\tMT_0000000437 | \n\t\t
\n"}],"files":[{"bytes":"13901381","datemodified":"2024-10-08T00:34:56","file_list":["./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1","./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/.cpq_package.inc","./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/.setup","./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/CP060895.xml","./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/acpqsetup","./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/fw-ConnectX6Dx-rel-22_41_1000-MCX623106AS-CDA_Ax-UEFI-14.34.12-FlexBoot-3.7.400.signed.bin","./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/hpsetup","./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/ilorest_chif.so","./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/mft-4.28.0-92.tgz","./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/mlxfwmanager","./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/payload.json","./usr/lib/aarch64-linux-gnu/firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1/setup","./usr/lib/aarch64-linux-gnu/hp-scexe-compat","./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP060895.scexe","./usr/lib/aarch64-linux-gnu/scexe-compat","./usr/lib/aarch64-linux-gnu/scexe-compat/CP060895.scexe"],"md5sum":"bf5e66e25bf2e63fc9476cad741a1bbb","name":"firmware-nic-mlnx-mcx623106as-cdat-mt-0000000437-22.41.1000-1.1.aarch64.rpm","release":"2024-10-08T04:28:05","revision":"0","sha1sum":"70b17ba40f8b127ac44fbb8911f78fe5bc29779b","size":"13MB","target_guids":["a6b1a447-382a-5a4f-15b3-101d15b30042"],"type_of_change":"1","version":"22.41.1000"}],"id":{"product":"3def138602444d29bec350a2ccf276bf","version":"48937f1747414b1eaba51b4d84e8be52"},"installation":{"command":"","command_params":"","install_caps":{"needuseracct":"no","silent":"no"},"per_device_install_time_seconds":360,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後必須重新啟動，更新才會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot is required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅해야 합니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。"},{"lang":"cn","x_late":"安装之后必须重启才能使更新生效并保持硬件稳定性。"}]}],"reboot_required":"yes"},"installation_dependency":{},"installation_notes":[{"lang":"en","x_late":"
Updating firmware with rpm installed:
\n\nUpdating firmware without installing rpm:
\n\nOn Secure Boot Enable mode:
\n\nThis product requires the Nvidia MFT Tools for your device and operating system to be installed before the firmware is updated on Secure Boot enable mode.
\nAlso, install the Nvidia (Mellanox) MFT tools and ensure the MST PCI module and MST PCI configuration module is loaded and running before attempting the firmware update on Secure Boot enable mode.
Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
\n\n\n\n
New features and changes included in version 22.41.1000:
\n\nThe following issues have been fixed in version 22.41.1000:
\n\nNote: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.
\n","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"R13","value":"HPE ProLiant Compute DL384 Gen12"},{"key":"R11","value":"HPE ProLiant RL300 Gen11"},{"key":"R12","value":"HPE ProLiant RL340 Gen11"}],"sw_keys":[{"name":"MT_0000000437","sw_key_expectedpath":"firmware:nic_mlnx_mcx623106as_cdat"}],"upgrade_requirements":"Recommended"}},{"DeviceClass":"e7a8b7dd-a6c0-4056-b14a-97bc423ddc7b","Devices":{"Device":[]},"Type":"Software","UpdatableBy":["RuntimeAgent"],"package":{"category":[{"key":"11400032","languages":[{"lang":"tw","x_late":"應用程式 - 系統管理"},{"lang":"en","x_late":"Application - System Management"},{"lang":"ko","x_late":"응용 프로그램 - 시스템 관리"},{"lang":"ja","x_late":"アプリケーション - システム マネジメント"},{"lang":"cn","x_late":"应用程序 - 系统管理"}]}],"description":[{"lang":"en","x_late":"Integrated Smart Update Tools (iSUT) is an application which enables firmware and software deployment via the iLO management network using the server’s local administrator credentials. iSUT can run as a service when working with HPE OneView managed servers or iLO Amplifier Pack or in an On Demand mode. iSUT requires a Service Pack for ProLiant-based ISO containing Smart Update Manager version 8.0.0 or later and an iLO Advanced Pack license for deployment."}],"divisions":[{"key":"6","language":[{"lang":"tw","x_late":"伺服器"},{"lang":"en","x_late":"Server"},{"lang":"ko","x_late":"서버"},{"lang":"ja","x_late":"サーバ"},{"lang":"cn","x_late":"服务器"}]},{"key":"64","language":[{"lang":"tw","x_late":"Lights-Out"},{"lang":"en","x_late":"Lights Out"}]}],"documentation":[],"files":[{"bytes":"6899472","datemodified":"2024-10-31T03:14:27","file_list":["./opt/hp/hpsut/README.txt","./opt/sut/README.txt","./opt/sut/bin/26C2B797.pub","./opt/sut/bin/74C3A4A2.pub","./opt/sut/bin/B1275EA3.pub","./opt/sut/bin/gatherlogs.sh","./opt/sut/bin/hpsut","./opt/sut/bin/sut","./opt/sut/bin/x64/sum_drop_table_x64","./opt/sut/config/sut_cfg_default.dat","./opt/sut/doc/OnDemandHelp.txt","./opt/sut/schemas/SUT.json","./opt/sut/schemas/SUTProvider.json","./opt/sut/schemas/SUTProvider_Gen10.json","./opt/sut/schemas/SUTRegistryEN_Legacy_zipped.json.gz","./opt/sut/schemas/SUTRegistryEN_Redfish.json","./opt/sut/schemas/SUTRegistryEN_Redfish_zipped.json.gz","./opt/sut/schemas/SUTRegistryJP_Legacy_zipped.json.gz","./opt/sut/schemas/SUTRegistryJP_Redfish_zipped.json.gz","./opt/sut/schemas/SUTSchema_Legacy_zipped.json.gz","./opt/sut/schemas/SUTSchema_Redfish_zipped.json.gz","./opt/sut/schemas/SUTSettings.json","./opt/sut/schemas/SUTSettingsSchema_Legacy_zipped.json.gz","./opt/sut/schemas/SUTSettingsSchema_Redfish_zipped.json.gz","./opt/sut/schemas/SUTSettings_Gen10.json","./opt/sut/schemas/SUTSystemInventorySchema_Legacy_zipped.json.gz","./opt/sut/schemas/SUTSystemInventorySchema_Redfish_zipped.json.gz","./opt/sut/schemas/SUTTasksettings.json","./opt/sut/schemas/SUTTasksettings_Legacy_zipped.json.gz","./opt/sut/schemas/SUTTasksettings_Redfish_zipped.json.gz","./opt/sut/schemas/SUT_Gen10.json","./opt/sut/scripts/sut.service","./opt/sut/scripts/sutd","./usr/lib/.build-id","./usr/lib/.build-id/57","./usr/lib/.build-id/57/374c6b2b55c3ea60f4ebaa7dfd1667b9b459f6","./usr/lib/.build-id/6f","./usr/lib/.build-id/6f/eee3ef9d415a3e8398b5b1b9e9058e139ccc42","./usr/share/man/man8/sut.8.gz","./usr/share/smartupdate/sut/component.xml"],"md5sum":"62cc75da2f36a636b1344f3becaa477f","name":"sut-5.3.0-20.linux.aarch64.rpm","release":"2024-10-31T07:11:14","revision":"0","sha1sum":"c52b17bdc17e7d208eb70f4fe22cc3d23e107522","size":"6MB","target_guids":["20a6e8e4-bf33-4c71-a6bf-d9ece09b5689"],"type_of_change":"1","version":"5.3.0"}],"id":{"product":"603fa5d97b1142a18f1bf257431b07a5","version":"949af45fc2c140a396ffd842474a51c0"},"installation":{"command":"","command_params":"","install_caps":{},"per_device_install_time_seconds":0,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後不一定要重新啟動。更新會在重新啟動後生效。無需重新啟動，就會維持硬體穩定。"},{"lang":"en","x_late":"Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot."},{"lang":"ko","x_late":"재부팅은 설치 후 선택 사항입니다. 업데이트는 재부팅 후 적용됩니다. 하드웨어 안정성은 재부팅하지 않아도 유지됩니다."},{"lang":"ja","x_late":"インストール後の再起動はオプションです。 アップデートは再起動後に有効になります。 ハードウェアの安定は、再起動しなくても維持されます。"},{"lang":"cn","x_late":"安装后重启是可选操作。更新将在重启后生效。无需重启即可保持硬件稳定性。"}]}],"reboot_required":"no"},"installation_dependency":{},"installation_notes":[{"lang":"en","x_late":"Download the rpm package to a directory on your hard drive and change to that directory. Install by typing rpm -Uvh hpsut-XXX.x86_64.rpm.
\n"}],"manufacturer_name":[{"lang":"en","x_late":"Hewlett Packard Enterprise"},{"lang":"cn","x_late":"惠普企业"}],"name":[{"lang":"en","x_late":"Integrated Smart Update Tools for Linux ARM64"}],"prerequisites":{"required_diskspace":{"size_kb":"0"},"supported_devices":[{"dev":"3307","subdev":"00E4","subven":"1590","target_guid":"a6b1a447-382a-5a4f-103c-3307159000e4","type":"pci","ven":"103C"},{"dev":"3307","subdev":"0000","subven":"0000","target_guid":"","type":"pci","ven":"103C"},{"dev":"3306","subdev":"00E4","subven":"1590","target_guid":"a6b1a447-382a-5a4f-103c-3306159000e4","type":"pci","ven":"103C"},{"dev":"3306","subdev":"0000","subven":"0000","target_guid":"","type":"pci","ven":"103C"}],"supported_operating_systems":[{"major":"9","minor":"0","name":"Red Hat Enterprise Linux 9 for ARM","platform":"red_hat_enterprise_linux_aarch64","sr":"OEM"},{"major":"15","minor":"0","name":"SUSE Linux Enterprise Server 15 for ARM","platform":"suse_linux_enterprise_server_aarch64","sr":"OEM"}],"supported_platforms":false},"release_date":"2024-11-22T04:06:20","revision_history":[{"lang":"en","latest_enhancements_x_late":"","latest_fixes_x_late":""},{"curr_enhancements_x_late":"See the iSUT Release Notes for information about the issues resolved in this release
\n","curr_fixes_x_late":"See the iSUT Release Notes for information about the issues resolved in this release
\n","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"R13","value":"HPE ProLiant Compute DL384 Gen12"},{"key":"R11","value":"HPE ProLiant RL300 Gen11"}],"sw_keys":[{"name":"sut","sw_key_expectedpath":"software:rpm"}],"upgrade_requirements":"Recommended"}},{"DeviceClass":"F6DE0320-2E0F-489A-B238-6DD8AE7C3811","Devices":{"Device":[{"DeviceName":"VV003840KXNTH","FirmwareImages":[{"DelayAfterInstallSec":10,"DirectFlashOk":false,"FileName":"GPM1743SHPK5.rel","InstallDurationSec":300,"Order":1,"ResetRequired":false,"Type":"Firmware","UefiFlashable":false}],"Target":"562340a5-3056-3330-3834-304b584e5448","Version":"HPK5"},{"DeviceName":"VV007680KXNTN","FirmwareImages":[{"DelayAfterInstallSec":10,"DirectFlashOk":false,"FileName":"GPM1743SHPK5.rel","InstallDurationSec":300,"Order":1,"ResetRequired":false,"Type":"Firmware","UefiFlashable":false}],"Target":"562340a5-3056-3730-3638-304b584e544e","Version":"HPK5"},{"DeviceName":"VV015360KXNTP","FirmwareImages":[{"DelayAfterInstallSec":10,"DirectFlashOk":false,"FileName":"GPM1743SHPK5.rel","InstallDurationSec":300,"Order":1,"ResetRequired":false,"Type":"Firmware","UefiFlashable":false}],"Target":"562340a5-3056-3531-3336-304b584e5450","Version":"HPK5"}]},"Type":"Firmware","UpdatableBy":["RuntimeAgent"],"package":{"category":[{"key":"2900357","languages":[{"lang":"tw","x_late":"韌體 - PCIe NVMe 儲存磁碟"},{"lang":"en","x_late":"Firmware - PCIe NVMe Storage Disk"},{"lang":"ko","x_late":"펌웨어 - PCIe NVMe 스토리지 디스크"},{"lang":"cn","x_late":"固件 - PCIe NVMe存储磁盘"}]}],"description":[{"lang":"en","x_late":"This arm64 Smart Component provides firmware for the following drive models: VV003840KXNTH, VV007680KXNTN and VV015360KXNTP"}],"divisions":[{"key":"9","language":[{"lang":"tw","x_late":"儲存裝置"},{"lang":"en","x_late":"Storage"},{"lang":"ko","x_late":"스토리지"},{"lang":"ja","x_late":"ストレージ"},{"lang":"cn","x_late":"存储设备"}]}],"documentation":[{"lang":"en","x_late":"Deliverable Name:
\n Online NVMe SSD Flash Component for Linux (arm64) - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives
\n
\nRelease Version and/or Date:
\n HPK5
\n"}],"files":[{"bytes":"6065458","datemodified":"2024-10-09T00:00:50","file_list":["./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1","./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/.cpq_package.inc","./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/.setup","./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/CP062047.xml","./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/GPM1743SHPK5.rel","./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/hpsetup","./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/libsetup.so","./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/payload.json","./usr/lib/aarch64-linux-gnu/firmware-hdd-f20279bc06-HPK5-1.1/setup","./usr/lib/aarch64-linux-gnu/hp-scexe-compat","./usr/lib/aarch64-linux-gnu/hp-scexe-compat/CP062047.scexe","./usr/lib/aarch64-linux-gnu/scexe-compat","./usr/lib/aarch64-linux-gnu/scexe-compat/CP062047.scexe"],"md5sum":"16db9016a88446c61cf626f7eb31fb06","name":"firmware-hdd-f20279bc06-HPK5-1.1.aarch64.rpm","release":"2024-10-09T03:53:29","revision":"0","sha1sum":"d653646631249854bbc28a0abb52f16b7808d025","size":"5MB","target_guids":["562340a5-3056-3330-3834-304b584e5448","562340a5-3056-3730-3638-304b584e544e","562340a5-3056-3531-3336-304b584e5450"],"type_of_change":"1","version":"HPK5"}],"id":{"product":"857ac986dfec440b80025c47d900893b","version":"e42b05ddda7f445a9723278935c5024b"},"installation":{"command":"CP041864.scexe","command_params":"","install_caps":{"needuseracct":"no","silent":"yes"},"per_device_install_time_seconds":120,"reboot_details":[{"language":[{"lang":"tw","x_late":"安裝後可能需要重新啟動，更新才會生效，並維持硬體穩定。"},{"lang":"en","x_late":"Reboot may be required after installation for updates to take effect and hardware stability to be maintained."},{"lang":"ko","x_late":"업데이트가 적용되고 하드웨어 안정성이 유지되려면 설치 후 재부팅이 필요할 수 있습니다."},{"lang":"ja","x_late":"アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。"},{"lang":"cn","x_late":"安装之后必须重启才能使更新生效并保持硬件稳定性。"}]}],"reboot_required":"no"},"installation_dependency":{},"installation_notes":[{"lang":"en","x_late":"
On RPM-based Linux system:
\n\nUpdate firmware by installing the rpm:
\n\nUpdating firmware without installing the rpm:
\n\nAdditional Information:
\n\nInstalling the firmware rpm package does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
\n"}],"manufacturer_name":[{"lang":"en","x_late":"Hewlett Packard Enterprise"},{"lang":"cn","x_late":"惠普企业"}],"name":[{"lang":"en","x_late":"Online NVMe SSD Flash Component for Linux (arm64) - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Drives"}],"prerequisites":{"required_diskspace":{"size_kb":"4000"},"supported_devices":[{"id":"VV015360KXNTP","target_guid":"562340a5-3056-3531-3336-304b584e5450","type":"nvme"},{"id":"VV007680KXNTN","target_guid":"562340a5-3056-3730-3638-304b584e544e","type":"nvme"},{"id":"VV003840KXNTH","target_guid":"562340a5-3056-3330-3834-304b584e5448","type":"nvme"}],"supported_operating_systems":[{"major":"8","minor":"0","name":"Red Hat Enterprise Linux 8 Server for ARM","platform":"red_hat_enterprise_linux_ARM","sr":"OEM"},{"major":"9","minor":"0","name":"Red Hat Enterprise Linux 9 for ARM","platform":"red_hat_enterprise_linux_aarch64","sr":"OEM"},{"major":"15","minor":"0","name":"SUSE Linux Enterprise Server 15 for ARM","platform":"suse_linux_enterprise_server_aarch64","sr":"OEM"}],"supported_platforms":false},"release_date":"2024-07-30T12:50:21","revision_history":[{"lang":"en","latest_enhancements_x_late":"","latest_fixes_x_late":""},{"curr_enhancements_x_late":"","curr_fixes_x_late":"Download the component and run the command "dpkg -i amsd_3.1.0-1748-jammy_arm64.deb"
\n"}],"manufacturer_name":[],"name":[{"lang":"en","x_late":"amsd for Ubuntu 24.04 LTS aarch64"}],"prerequisites":{"required_diskspace":{"size_kb":"0"},"supported_operating_systems":[{"major":"22","minor":"04","name":"Ubuntu 22.04 LTS","platform":"ubuntu2204","sr":"OEM"}],"supported_platforms":false},"release_date":"2024-10-03T07:21:22","revision_history":[{"lang":"en","latest_enhancements_x_late":"","latest_fixes_x_late":""},{"curr_enhancements_x_late":"AMS qualification of HPE ProLiant Compute DL384 Gen12 Server
\n","curr_fixes_x_late":"Fix for amsd crashing upon hot-add/remove of non-nvme local drives.
\n","lang":"en"}],"schema_version":"1.0.0.0","supported_products":[{"key":"R13","value":"HPE ProLiant Compute DL384 Gen12"},{"key":"R11","value":"HPE ProLiant RL300 Gen11"}],"sw_keys":[],"upgrade_requirements":"Optional"}}]}