02^07:6F:03^Critical^No events were received from system firmware^ ^ 
02^13:70:A1^Critical^Machine Check initiated^ ^ 
E0^13^Warning^CPU monarch collision^FPL_IndicationProvider^205
E0^30^Warning^CPU structure initialization failed^FPL_IndicationProvider^211
E0^31^Warning^CPU failed early config^FPL_IndicationProvider^212
E0^33^Warning^CPU failed early self test^FPL_IndicationProvider^213
E0^34^Warning^CPU failed^FPL_IndicationProvider^214
E0^36^Warning^CPU failed late self test^FPL_IndicationProvider^215
E0^37^Warning^The CPU late test has failed because of insufficient memory^FPL_IndicationProvider^216
E0^50^Critical^External interruption nest limit exceeded^FPL_IndicationProvider^223
E0^54^Critical^PSR fetch failure^FPL_IndicationProvider^227
E0^56^Warning^CPU PAL incompatible with cpu^FPL_IndicationProvider^229
E0^57^Warning^Slave is incompatible with monarch^FPL_IndicationProvider^230
E0^65^Critical^Min-state registration failure^FPL_IndicationProvider^236
E0^67^Warning^Boot monarch timed out^FPL_IndicationProvider^238
E0^79^Warning^Boot pal procedure (proc) failure^FPL_IndicationProvider^245
E0^83^Warning^CPU rendezvous failure^FPL_IndicationProvider^249
E0^91^Warning^Slave wakeup before vector registered^FPL_IndicationProvider^253
E0^92^Warning^CPU failed rendezvous handler^FPL_IndicationProvider^254
E0^106^Critical^CPU unexpected MCA^FPL_IndicationProvider^262
E0^108^Critical^CPU unknown boot error^FPL_IndicationProvider^264
E0^121^Critical^INIT initiated^FPL_IndicationProvider^4552
E0^218^Warning^Memory platform data update failure^FPL_IndicationProvider^2735
E0^335^Warning^Firmware is adding a DEGRADED cpu node to the device tree.^FPL_IndicationProvider^349
E0^365^Critical^The current cell detected incompatible CPUs on another cell^FPL_IndicationProvider^354
E0^411^Error^A CPU has taken over for the monarch CPU^FPL_IndicationProvider^365
E0^490^Error^A critical resource could not be found or is unusable^FPL_IndicationProvider^401
E0^546^Error^This indicates that all the cpus in the cell did not rendezvous during the MCA.^FPL_IndicationProvider^426
E0^557^Error^The cell monarch cpu has failed.^FPL_IndicationProvider^558
E0^560^Error^SetViewRoot on a remote cell failed.^FPL_IndicationProvider^561
E0^638^Warning^INIT: Monarch failed in slave rendezvous^FPL_IndicationProvider^439
E0^658^Warning^MC: Previous PAL rendezvous failed; rebooting^FPL_IndicationProvider^444
E0^683^Warning^MC_RENDEZVOUS: No wakeup registered^FPL_IndicationProvider^449
E0^685^Warning^MC_RENDEZVOUS: Get PAL features failed^FPL_IndicationProvider^451
E0^686^Warning^MC_RENDEZVOUS: Set PAL features failed^FPL_IndicationProvider^452
E0^724^Warning^EFI unable to determine frequency base of the CPU interval timer^FPL_IndicationProvider^472
E0^734^Critical^Installed processors are not of compatible models or families^FPL_IndicationProvider^481
E0^735^Critical^caches sizes are inconsistent^FPL_IndicationProvider^482
E0^737^Warning^selecting new monarch^FPL_IndicationProvider^484
E0^738^Warning^monarch not lowest stepping^FPL_IndicationProvider^485
E0^740^Warning^processors are over clocked^FPL_IndicationProvider^487
E0^741^Warning^cpu access error on processor info area^FPL_IndicationProvider^488
E0^744^Warning^Prototype CPU installed^FPL_IndicationProvider^491
E0^745^Warning^final boot rendezvous monarch watchdog timeout^FPL_IndicationProvider^492
E0^746^Error^Supplemental cpu tests generated an unexpected result^FPL_IndicationProvider^2462
E0^777^Warning^/options settings for CPUBusConfigValue aren't compatible with PAL^FPL_IndicationProvider^2433
E0^778^Warning^The Get Processor Bus Dependent Configuration Features PAL call failed.^FPL_IndicationProvider^518
E0^790^Warning^Processor has incompatible fixed core ratio^FPL_IndicationProvider^525
E0^791^Critical^All processors slated for compatibility deconfiguration^FPL_IndicationProvider^526
E0^800^Error^CPUs running at different speeds were detected during rendezvous^FPL_IndicationProvider^1016
E0^813^Error^Duplicate Cpu Ids were detected within a cell.^FPL_IndicationProvider^546
E0^827^Warning^Setting processor response timeout failed^FPL_IndicationProvider^550
E0^2732^Error^CPU Revisions did not match^FPL_IndicationProvider^638
E0^2733^Error^2 cpus are running at mismatched frequencies.^FPL_IndicationProvider^639
E0^2734^Error^A cpu is being overclocked^FPL_IndicationProvider^640
E0^2767^Critical^MP ID command must be run^FPL_IndicationProvider^643
E0^2774^Warning^PDHC FW was reset by hardware due to firmware inactivity.^FPL_IndicationProvider^647
E0^2836^Warning^IO Fan Failed^FPL_IndicationProvider^678
E0^2855^Critical^Watchdog Timer Expired^FPL_IndicationProvider^684
E0^2872^Warning^Failure to read data from a FRUID EEPROM^FPL_IndicationProvider^6774
E0^2892^Critical^CPU fan failed^FPL_IndicationProvider^2904
E0^2893^Warning^CPU fan failing^FPL_IndicationProvider^2905
E0^2894^Critical^CC chip fan failed^FPL_IndicationProvider^2906
E0^2895^Warning^CC chip fan failing^FPL_IndicationProvider^2907
E0^2903^Error^Power fault on cell board^FPL_IndicationProvider^708
E0^2938^Warning^The CPU Node reported a problem initializing its node in the device tree^FPL_IndicationProvider^2437
E0^2939^Warning^The ExecuteCommand function failed on a CPU.^FPL_IndicationProvider^710
E0^2940^Warning^A remote CPU is not prepared to receive a command^FPL_IndicationProvider^711
E0^2953^Critical^CPUs (and or termination) loaded in wrong order^FPL_IndicationProvider^615
E0^2975^Error^A power converter on the cell has failed, but cell power is still good.^FPL_IndicationProvider^5258
E0^3009^Error^CPUProcConfigValue in /options is not compatible with the current PAL/CPU^FPL_IndicationProvider^2439
E0^3010^Warning^Firmware was unable to determine the Processor Dependent Features^FPL_IndicationProvider^622
E0^3133^Warning^An attempt to write to a device on the PDHCs I2C bus has failed.^FPL_IndicationProvider^628
E0^3134^Warning^An attempt to read from a device on the PDHC's I2C bus has failed.^FPL_IndicationProvider^629
E0^3135^Warning^An attempt to write to a device on the PDHC's SM bus has failed.^FPL_IndicationProvider^630
E0^3136^Warning^An attempt to read from a device on the PDHC's SM bus has failed.^FPL_IndicationProvider^631
E0^3137^Error^Cell boot has been disabled due to a failure setting the frequency registers.^FPL_IndicationProvider^632
E0^3140^Error^Cell boot has been disabled because setup of a CPU thermal sensor failed.^FPL_IndicationProvider^635
E0^3141^Error^A CPU module has reported overtemp, so will be powered off in 2 minutes.^FPL_IndicationProvider^636
E0^3147^Error^Boot is disabled because the cell type does not match the System FW ROM type.^FPL_IndicationProvider^712
E0^3218^Warning^An error was encountered pointing the slave cell consoles to the diva^FPL_IndicationProvider^737
E0^3219^Error^An error was encountered trying to relocate a slave cells registry^FPL_IndicationProvider^738
E0^3269^Warning^CPUs of different maximum core frequencies are installed^FPL_IndicationProvider^753
E0^3758^Warning^SAL errlog access timeout^FPL_IndicationProvider^810
E0^3798^Warning^Firmware could not set Pal Proc features^FPL_IndicationProvider^2443
E0^3814^Warning^On Line Delete operation was begun but firmware couldn't find a deleteable cell^FPL_IndicationProvider^826
E0^3837^Warning^A dimm or CPU has been deconfigured or failed testing^FPL_IndicationProvider^832
E0^3839^Error^The cell will not join the PD^FPL_IndicationProvider^833
E0^3857^Warning^This means that all the cpus in the cell did not show up.^FPL_IndicationProvider^838
E0^3864^Warning^One of the BT errors occurred that results in abandoning memory dump.^FPL_IndicationProvider^843
E0^3877^Warning^Invalid data read from a CPU module's Processor Information ROM.^FPL_IndicationProvider^849
E0^3882^Warning^Invalid parameter when setting cpu frequency ratios^FPL_IndicationProvider^2444
E0^3940^Error^Cell has been disabled by the PDHC because no CPU modules were found.^FPL_IndicationProvider^866
E0^3941^Error^Cell has been disabled by PDHC FW because the CPU modules are not compatible.^FPL_IndicationProvider^867
E0^3942^Error^Cell has been disabled because of invalid data in a CPU module Scratch EEPROM.^FPL_IndicationProvider^868
E0^3979^Warning^The CPU is performance or functionally restricted^FPL_IndicationProvider^885
E0^3982^Warning^Status indicates that the Late Self Tests did not actually run^FPL_IndicationProvider^887
E0^4019^Error^System Clocks are not valid^FPL_IndicationProvider^891
E0^4379^Warning^CPU Dual Core Initialization Failed^FPL_IndicationProvider^918
E0^4380^Warning^Second CPU in Pair has been disabled^FPL_IndicationProvider^919
E0^4388^Critical^Cell failed compatibility checks.^FPL_IndicationProvider^923
E0^4394^Error^All cpus on the Cell are scheduled to be deconfigured^FPL_IndicationProvider^928
E0^4678^Critical^The clock ratio reported by manageability does not match the actual clock ratio^FPL_IndicationProvider^2687
E0^5175^Warning^The Creator Product Name is invalid^FPL_IndicationProvider^2726
E0^5430^Warning^An error was encountered when enabling or disabling threads.^FPL_IndicationProvider^4751
E0^5509^Warning^During Machine check, SAL cannot roundup the processors.^FPL_IndicationProvider^6855
E0^5699^Warning^When firmware attempted to handle a failed vPar launch, there was no handler registered by the HPUX vPars monitor. The CPU will enter a spin-loop which may only be exited by a reset. This event can only occur in vPars mode.^FPL_IndicationProvider^4668
E0^5779^Error^CPU modules have been installed in an illegal configuration on the cell board.^FPL_IndicationProvider^4535
E0^5780^Error^An invalid terminator card is installed on the cell board^FPL_IndicationProvider^4536
E0^5822^Warning^Over-temperature condition detected on a processor^FPL_IndicationProvider^4543
E0^5823^Warning^Cache errors detected on a processor^FPL_IndicationProvider^4544
E0^5824^Warning^Corrected errors detected in the memory cache for a processor module^FPL_IndicationProvider^4545
E0^5825^Warning^Corrected errors detected on the system bus for a processor module^FPL_IndicationProvider^4546
E0^5826^Warning^Corrected errors detected on the processor bus for a processor module^FPL_IndicationProvider^4547
E0^5827^Warning^Corrected errors detected in the memory tag for a processor module^FPL_IndicationProvider^4548
E0^5833^Warning^Firmware error setting the NVRAM value of preferred-bsp for the vPars monitor. The partition will boot using the PD monarch, but the value of preferred-bsp may not match this CPU.^FPL_IndicationProvider^4702
E0^5840^Critical^Internal firmware table indicates that the number of CPUs in this config is unknown. Configuration and booting is therefore impossible in this cell^FPL_IndicationProvider^4703
E0^5853^Critical^An unrecoverable processor interrupt occurred.^FPL_IndicationProvider^4705
E0^6537^Warning^All CPUs are slated for deconfiguration^FPL_IndicationProvider^5270
E0^6538^Warning^CPUs have automatically been reconfigured.  This could be due to all CPUs being deconfigured, or a new type of CPU installed or NVM clearing due to a SFW version change.^FPL_IndicationProvider^5262
E0^6588^Critical^CPU Smartfan Controller Failed^FPL_IndicationProvider^4962
E0^6605^Critical^Insufficient physical processors^FPL_IndicationProvider^4959
E0^6703^Critical^An unsupported CPU generation was configured^FPL_IndicationProvider^5137
E0^6795^Error^CPU Power Module Fault^FPL_IndicationProvider^5155
E0^6796^Error^CPU Hotswap Controller Fault^FPL_IndicationProvider^5156
E0^6850^Error^The OS being booted is not supported in a mixed cpu revision configuration.^FPL_IndicationProvider^5163
E0^6870^Warning^The requested OS does not support booting with mixed CPU revisions.^FPL_IndicationProvider^5166
E0^6894^Critical^The LPM has reported to the Pdhc that the CPU modules are loaded incorrectly^FPL_IndicationProvider^5168
E0^6932^Error^Invalid or no OS boot rendezvous entry point^FPL_IndicationProvider^5174
E0^7050^Critical^The PDHC has inhibited a processor due to a power or thermal fault.^FPL_IndicationProvider^5192
E0^7149^Critical^An unrecoverable processor interrupt occurred.^FPL_IndicationProvider^6569
E0^7150^Critical^An unrecoverable processor interrupt occurred.^FPL_IndicationProvider^6570
E0^7155^Critical^External clock cable has been removed from the CPU cabinet.^FPL_IndicationProvider^6575
E0^7193^Error^A hardware semaphore dead lock condition has been detected^FPL_IndicationProvider^6693
E0^7194^Error^A semaphore dead lock condition has been detected^FPL_IndicationProvider^6694
E0^7195^Error^A semaphore dead lock condition has been detected^FPL_IndicationProvider^6695
E0^7196^Error^A semaphore dead lock condition has been detected^FPL_IndicationProvider^6696
E0^7324^Warning^Corrected errors have been detected on the system bus for the processor module.^FPL_IndicationProvider^6895
E0^7343^Warning^CPU performance degraded due to excessive errors in third level cache.^FPL_IndicationProvider^6896
E0^7395^Critical^Fatal interrupt occurred.^FPL_IndicationProvider^6992
