E0^124^Warning^LBA has unexpected number of I/O slots^FPL_IndicationProvider^269
E0^133^Warning^I/O LBA clear error failed^FPL_IndicationProvider^275
E0^144^Warning^I/O SBA clear error failed^FPL_IndicationProvider^2742
E0^407^Critical^Crossbar slices are out of rev with each other.^FPL_IndicationProvider^363
E0^408^Critical^Crossbar slices are configured poorly^FPL_IndicationProvider^364
E0^443^Error^TLB Fetch timeout^FPL_IndicationProvider^375
E0^444^Critical^Link presence goes away, FE^FPL_IndicationProvider^376
E0^445^Critical^LBA to SBA parity error on command, rope will go fatal^FPL_IndicationProvider^4606
E0^447^Critical^Memory fetch timeout^FPL_IndicationProvider^379
E0^448^Error^Error was encountered when Initializing the LBA.^FPL_IndicationProvider^380
E0^449^Warning^LBA correctable Timeout Error was encountered.^FPL_IndicationProvider^381
E0^450^Error^LBA uncorrectable Function Error was encountered.^FPL_IndicationProvider^4612
E0^451^Error^LBA uncorrectable Timeout Error was encountered.^FPL_IndicationProvider^4613
E0^452^Error^Misc. uncorrectable error discovered on LBA.^FPL_IndicationProvider^4615
E0^453^Critical^LBA encountered an uncorrectable parity error.^FPL_IndicationProvider^385
E0^454^Critical^LBA Misc. Fatal Error encountered.^FPL_IndicationProvider^4618
E0^455^Critical^LBA Fatal function error encountered.^FPL_IndicationProvider^387
E0^456^Critical^LBA Fatal Parity error encountered.^FPL_IndicationProvider^388
E0^457^Critical^LBA Fatal Timeout Error Encountered.^FPL_IndicationProvider^4624
E0^518^Warning^LBA has unexpected number of I/O Slots.^FPL_IndicationProvider^419
E0^583^Warning^Could not obtain the crossbar port semaphore^FPL_IndicationProvider^573
E0^584^Warning^Could not release the crossbar port semaphore.^FPL_IndicationProvider^574
E0^723^Critical^Prohibited SAL callback attempted^FPL_IndicationProvider^471
E0^762^Error^A crossbar port is unexpectedly not present.^FPL_IndicationProvider^504
E0^763^Error^A crossbar port unexpectedly has its HW_LINK_OK bit not set.^FPL_IndicationProvider^505
E0^764^Error^A connected port was found to be in FE^FPL_IndicationProvider^506
E0^793^Error^An unexpected or invalid value was read from a crossbar remote route table.^FPL_IndicationProvider^527
E0^794^Error^Error reading the PORT[n]_NEIGHBOR_INFO  XBC CSR.^FPL_IndicationProvider^528
E0^1795^Warning^An invalid XBC to XBC port was found.^FPL_IndicationProvider^594
E0^2657^Error^An XBC port found to have an unexpected error.^FPL_IndicationProvider^598
E0^2660^Warning^During routing a crossbar is found to be in an unexpected routing state.^FPL_IndicationProvider^600
E0^2661^Warning^An unexpected XBC forward progress state was continually found until timing out.^FPL_IndicationProvider^601
E0^2666^Critical^Remote routing a crossbar failed.^FPL_IndicationProvider^604
E0^3159^Critical^An invalid number of XBC ports were landmined in the system.^FPL_IndicationProvider^718
E0^3709^Error^There was an error initializing the SBA node^FPL_IndicationProvider^779
E0^3710^Error^There was an error discovering the SBA^FPL_IndicationProvider^780
E0^3711^Error^An error was encountered while resetting the SBA^FPL_IndicationProvider^781
E0^3712^Warning^There was an error initializing the IO link^FPL_IndicationProvider^782
E0^3713^Warning^There is a problem initializing the Cell Controller - SBA cable^FPL_IndicationProvider^783
E0^3715^Warning^There was an error initializing the LBA^FPL_IndicationProvider^785
E0^3716^Error^There was an error querying the LBA width^FPL_IndicationProvider^786
E0^3717^Warning^There was an error with the LBA phase^FPL_IndicationProvider^787
E0^3718^Warning^There was an error clearing the LBA^FPL_IndicationProvider^788
E0^3719^Error^There was an error with the LBA log^FPL_IndicationProvider^789
E0^3720^Error^There was an error discovering the LBA^FPL_IndicationProvider^790
E0^3721^Warning^There was an error configuring the LBA^FPL_IndicationProvider^791
E0^3723^Error^There was an error configuring PCI space through the LBA^FPL_IndicationProvider^793
E0^3843^Warning^A rope went fatal from the SBA^FPL_IndicationProvider^835
E0^3845^Warning^One of the rope units in the SBA is dead.^FPL_IndicationProvider^836
E0^4484^Error^The link between the CC and SBA failed^FPL_IndicationProvider^961
E0^4485^Error^The SBA failed and the cell has no I/O^FPL_IndicationProvider^962
E0^4493^Error^Error creating the internal data and services for the SBA.^FPL_IndicationProvider^970
E0^4494^Error^Error attaching the services to the SBA internal data structures.^FPL_IndicationProvider^971
E0^4495^Error^Error initializing the internal SBA data and services.^FPL_IndicationProvider^972
E0^4496^Error^The SBA type is unknown to the system firmware^FPL_IndicationProvider^973
E0^4745^Error^Error encountered while collecting SBA error logs^FPL_IndicationProvider^2447
E0^4746^Error^Fabric is unable to route the crossbar after multiple retry attempts^FPL_IndicationProvider^1005
E0^4754^Error^PCI card inaccessible due to bus error^FPL_IndicationProvider^1823
E0^5375^Warning^ArfIsCsrRouteTraversable was called on a back-to-back system.^FPL_IndicationProvider^2918
E0^5558^Warning^Failed to get an address when opening XBC to XBC links^FPL_IndicationProvider^4885
E0^5559^Warning^Failed to open a fabric link^FPL_IndicationProvider^4895
E0^5564^Warning^failed to disperse the routes across links^FPL_IndicationProvider^4894
E0^5565^Warning^Error setting up XBC-XBC link for routing across it^FPL_IndicationProvider^4899
E0^5566^Warning^Error while routing the remote side of a route^FPL_IndicationProvider^4898
E0^5567^Warning^Error getting address while routing the remote XBC^FPL_IndicationProvider^4886
E0^5569^Warning^Error finding the shortest route^FPL_IndicationProvider^4888
E0^5721^Critical^Server contains one or more SBAs but firmware was unable to initialize and construct the IOPDIR hardware and database for even a single one of the IOCs so the system will be unbootable.^FPL_IndicationProvider^4690
E0^5772^Warning^During reset of a soft partition, the LBA was re-initialized and this operation failed. The soft partition may continue to boot, but the IO device is probably unusable. This is probably a hardware failure.^FPL_IndicationProvider^4757
E0^5865^Error^SBA Init Node method property error^FPL_IndicationProvider^4760
E0^5866^Error^No root node found in SBA InitNode^FPL_IndicationProvider^4761
E0^5867^Error^SBA InitNode method find node error^FPL_IndicationProvider^4762
E0^5868^Error^SBA LBA Configure method call failure^FPL_IndicationProvider^4763
E0^5869^Error^SBA call to LBA Configure method fails in MCA path^FPL_IndicationProvider^4764
E0^5870^Error^SBA call to LBA PciScan method fails.^FPL_IndicationProvider^4765
E0^5871^Error^SBA call to LBA SetDeviceMask method fails.^FPL_IndicationProvider^4766
E0^5872^Error^Attempt to determine I/O backplane type fails.^FPL_IndicationProvider^4767
E0^5873^Error^SBA unsupported function ID.^FPL_IndicationProvider^4768
E0^5874^Error^SBA component unsupported class code^FPL_IndicationProvider^4769
E0^5875^Error^SBA component unsupported revision^FPL_IndicationProvider^4770
E0^5876^Error^SBA component unsupported module ID^FPL_IndicationProvider^4771
E0^5878^Error^SBA link configuration error^FPL_IndicationProvider^4772
E0^5879^Error^SBA error configuration error^FPL_IndicationProvider^4773
E0^5880^Error^SBA map sba config register space fails^FPL_IndicationProvider^4774
E0^5881^Error^SBA map in lba config register space fails^FPL_IndicationProvider^4775
E0^5882^Error^SBA initialize cacheline size error^FPL_IndicationProvider^4776
E0^5883^Error^SBA link error clear error^FPL_IndicationProvider^4777
E0^5884^Error^SBA cache initialization error^FPL_IndicationProvider^4778
E0^5885^Error^SBA initialize hardfail mode error^FPL_IndicationProvider^4779
E0^5886^Error^SBA initialize timeout error^FPL_IndicationProvider^4780
E0^5887^Error^SBA rope unit error config error^FPL_IndicationProvider^4781
E0^5888^Error^SBA rope unit error clear error^FPL_IndicationProvider^4782
E0^5889^Error^SBA rope bundling error^FPL_IndicationProvider^4783
E0^5890^Error^SBA found no valid LBAs during configuration^FPL_IndicationProvider^4784
E0^5891^Error^SBA rope width configuration error^FPL_IndicationProvider^4785
E0^5892^Error^SBA rope link error configuration error^FPL_IndicationProvider^4786
E0^5893^Error^SBA rope error clear error^FPL_IndicationProvider^4787
E0^5894^Error^SBA disable directed range error^FPL_IndicationProvider^4788
E0^5895^Error^SBA MMIO config error^FPL_IndicationProvider^4789
E0^5896^Error^SBA IO configuration error^FPL_IndicationProvider^4790
E0^5897^Error^SBA initialize CSR error^FPL_IndicationProvider^4791
E0^5898^Error^SBA PCI bus scan operation ran out of PCI bus range^FPL_IndicationProvider^4792
E0^5899^Error^SBA call to LBA DisableArb fails^FPL_IndicationProvider^4793
E0^5900^Error^SBA rope phase set error^FPL_IndicationProvider^4794
E0^5902^Error^SBA rope align error^FPL_IndicationProvider^4795
E0^5903^Error^SBA rope phase compare error^FPL_IndicationProvider^4796
E0^5904^Error^LBA platform data error^FPL_IndicationProvider^4797
E0^5905^Error^LBA get property error failure^FPL_IndicationProvider^4798
E0^5906^Error^LBA attempt to access unavailable LBA^FPL_IndicationProvider^4799
E0^5907^Error^LBA set request depth error^FPL_IndicationProvider^4800
E0^5908^Error^LBA set RPCE error^FPL_IndicationProvider^4801
E0^5909^Error^LBA rope width parameter error^FPL_IndicationProvider^4802
E0^5910^Error^LBA invalid CLASS error^FPL_IndicationProvider^4803
E0^5911^Error^LBA set bus frequency error^FPL_IndicationProvider^4804
E0^5912^Error^LBA slot power on failure^FPL_IndicationProvider^4805
E0^5913^Error^LBA verify DLL lock failure^FPL_IndicationProvider^4806
E0^5914^Error^LBA check bus capability error^FPL_IndicationProvider^4807
E0^5915^Error^LBA set SLT error^FPL_IndicationProvider^4808
E0^5916^Error^LBA hint configuration error^FPL_IndicationProvider^4809
E0^5917^Error^LBA configure PCI error failed^FPL_IndicationProvider^4810
E0^5918^Error^LBA PCIX error configuration fails^FPL_IndicationProvider^4811
E0^5919^Error^LBA general error configuration fails^FPL_IndicationProvider^4812
E0^5920^Error^LBA release reset error^FPL_IndicationProvider^4813
E0^5921^Error^LBA enable arbitration error^FPL_IndicationProvider^4814
E0^5922^Error^LBA create node error^FPL_IndicationProvider^4815
E0^5923^Error^LBA attach service error^FPL_IndicationProvider^4816
E0^5924^Error^LBA set property error^FPL_IndicationProvider^4817
E0^5925^Error^LBA InitNode method call failed^FPL_IndicationProvider^4818
E0^5926^Error^LBA set hardfail error^FPL_IndicationProvider^4819
E0^5927^Error^LBA slot device e scan error^FPL_IndicationProvider^4820
E0^5928^Error^LBA PCI bus map failure^FPL_IndicationProvider^4821
E0^5929^Error^LBA set bus number failure^FPL_IndicationProvider^4822
E0^5930^Error^LBA set bus error mode failure^FPL_IndicationProvider^4823
E0^5931^Error^LBA acquire semaphore error^FPL_IndicationProvider^4824
E0^5933^Error^SBA get property error^FPL_IndicationProvider^4826
E0^5934^Error^SBA set property error^FPL_IndicationProvider^4827
E0^7008^Warning^Firmware was unable to find a replacement route for the broken link^FPL_IndicationProvider^5187
E0^7025^Warning^Error occurred while getting the expected neighbor for distributed routing^FPL_IndicationProvider^5189
E0^7028^Warning^Could not read crossbar neighbor information during routing^FPL_IndicationProvider^5190
E0^7029^Warning^Could not establish route for local crossbar during route around routing^FPL_IndicationProvider^5191
E0^7109^Warning^An error occurred while retrieving the crossbar chip number^FPL_IndicationProvider^5251
E0^7121^Warning^A platform error was detected by the firmware/hardware, and corrected by using a spare channel.   ^FPL_IndicationProvider^5261
E0^7127^Warning^A platform error was detected by the firmware/hardware, and corrected by using a spare channel.^FPL_IndicationProvider^5263
E0^7130^Warning^Multiple platform errors were detected and corrected by the firmware/hardware.^FPL_IndicationProvider^5266
E0^7157^Warning^Fatal errors are present on a cell's link to the fabric^FPL_IndicationProvider^6577
E0^7159^Warning^System firmware encountered fabric problems^FPL_IndicationProvider^6579
E0^7160^Warning^Fabric errors are present on a cell's link to the fabric.^FPL_IndicationProvider^6580
E0^7162^Warning^Recovery from PCI error: Log contains device specific error log 2^FPL_IndicationProvider^6911
E0^7163^Warning^Recovery from PCI error: Log contains device specific error log 5^FPL_IndicationProvider^6912
