02^13:70:A1^Critical^Machine Check initiated^ ^ 
E0^2^Warning^Bad OS MCA checksum^FPL_IndicationProvider^6854
E0^25^Critical^Boot cell virtualize PAL failure^FPL_IndicationProvider^208
E0^27^Critical^Boot cell virtualize SAL failure^FPL_IndicationProvider^209
E0^28^Critical^Boot cell virtualize SALPROC failure^FPL_IndicationProvider^210
E0^33^Warning^CPU failed early self test^FPL_IndicationProvider^213
E0^56^Warning^CPU PAL incompatible with cpu^FPL_IndicationProvider^229
E0^65^Critical^Min-state registration failure^FPL_IndicationProvider^236
E0^69^Critical^PAL_B not in firmware interface table (FIT)^FPL_IndicationProvider^239
E0^70^Critical^SAL_B not in firmware interface table (FIT)^FPL_IndicationProvider^240
E0^77^Critical^Pal proc error getting pal copy info^FPL_IndicationProvider^243
E0^78^Critical^Pal proc error copying pal to memory^FPL_IndicationProvider^244
E0^79^Warning^Boot pal procedure (proc) failure^FPL_IndicationProvider^245
E0^84^Critical^Error extracting sal_b from rom^FPL_IndicationProvider^250
E0^106^Critical^CPU unexpected MCA^FPL_IndicationProvider^262
E0^118^Warning^System Firmware failed to retrieve the PAL entry address.^FPL_IndicationProvider^265
E0^119^Warning^Expected MC vector unregistered^FPL_IndicationProvider^266
E0^152^Critical^Machine Check initiated^FPL_IndicationProvider^4559
E0^248^Critical^Unexpected machine check during memory code^FPL_IndicationProvider^2685
E0^258^Critical^Nested Machine Checks^ ^ 
E0^263^Warning^OS MCA address not registered^FPL_IndicationProvider^341
E0^264^Warning^OS MCA did not correct the Machine Check^FPL_IndicationProvider^4597
E0^268^Warning^SAL_CHECK failed for an unknown reason^FPL_IndicationProvider^344
E0^270^Warning^SAL_INIT failed for an unknown reason^FPL_IndicationProvider^345
E0^279^Critical^Unexpected return to SAL_CHECK^FPL_IndicationProvider^347
E0^280^Critical^Unexpected return to SAL_INIT^FPL_IndicationProvider^348
E0^546^Error^This indicates that all the cpus in the cell did not rendezvous during the MCA.^FPL_IndicationProvider^426
E0^548^Error^This indicates the loss of lockstep during the MCA path.^FPL_IndicationProvider^428
E0^594^Critical^BMC token upload failure^FPL_IndicationProvider^576
E0^595^Warning^NVM token access failure^FPL_IndicationProvider^577
E0^601^Warning^ROM revision not equal to FIT revision^FPL_IndicationProvider^583
E0^602^Warning^ROM revision not equal to Rev block^FPL_IndicationProvider^584
E0^605^Warning^PAL A execution rom warning^FPL_IndicationProvider^587
E0^606^Warning^PAL B execution rom warning^FPL_IndicationProvider^588
E0^646^Warning^MC: I/O error log/clear error^FPL_IndicationProvider^440
E0^655^Warning^MC: MCA to BERR escalation not supported by PAL^FPL_IndicationProvider^441
E0^656^Warning^MC:  MCA to BINIT escalation not supported by PAL^FPL_IndicationProvider^442
E0^657^Warning^Machine Check (MC): failed to get the feature set from PAL.^FPL_IndicationProvider^443
E0^658^Warning^MC: Previous PAL rendezvous failed; rebooting^FPL_IndicationProvider^444
E0^659^Warning^MC: Set PAL features failed^FPL_IndicationProvider^445
E0^677^Warning^MC: Monarch failed in slave rendezvous^FPL_IndicationProvider^4635
E0^682^Warning^MC_RENDEZVOUS: No MC monarch^FPL_IndicationProvider^448
E0^683^Warning^MC_RENDEZVOUS: No wakeup registered^FPL_IndicationProvider^449
E0^684^Warning^MC_RENDEZVOUS: MCA escalation not supported by PAL^FPL_IndicationProvider^450
E0^685^Warning^MC_RENDEZVOUS: Get PAL features failed^FPL_IndicationProvider^451
E0^686^Warning^MC_RENDEZVOUS: Set PAL features failed^FPL_IndicationProvider^452
E0^692^Critical^Internal Firmware Programming Error from the EFI portion of the firmware^FPL_IndicationProvider^453
E0^698^Critical^Inconsistency in the length of the extensible SAL interface (ESI) table^FPL_IndicationProvider^455
E0^700^Critical^The computed checksum for extensible SAL interface ESI Table incorrect.^FPL_IndicationProvider^456
E0^701^Warning^ESI Table contains an unsupported entry type.^FPL_IndicationProvider^457
E0^715^Critical^The EFI/SAL handoff structure's version does not match EFI expectations^FPL_IndicationProvider^464
E0^717^Critical^Unable to obtain access to all RTC SAL services^FPL_IndicationProvider^465
E0^718^Critical^Unable to obtain access to all SAL timer services^FPL_IndicationProvider^466
E0^720^Critical^No I/O port space region found in the memory data table (MDT)^FPL_IndicationProvider^468
E0^722^Warning^EFI unable to read current speedy boot settings^FPL_IndicationProvider^470
E0^723^Critical^Prohibited SAL callback attempted^FPL_IndicationProvider^471
E0^742^Critical^PAL A was not executed - HALT^FPL_IndicationProvider^489
E0^743^Critical^PAL B was not executed - HALT^FPL_IndicationProvider^490
E0^755^Critical^EFI unable to find the SAL services for installing interrupt handlers^FPL_IndicationProvider^499
E0^756^Critical^EFI unable to find the SAL service to install run-time interrupt handlers^FPL_IndicationProvider^500
E0^757^Critical^EFI unable to find the SAL services for installing interrupt handlers^FPL_IndicationProvider^501
E0^758^Critical^EFI unable to find the SAL service to install boot-time interrupt handlers^FPL_IndicationProvider^502
E0^768^Warning^Unable to determine system mode because EFI/SAL interface not initialized^FPL_IndicationProvider^509
E0^770^Warning^EFI unable to specify system mode because EFI/SAL interface not initialized^FPL_IndicationProvider^511
E0^771^Warning^Unable to enter normal system mode because EFI/SAL interface not initialized^FPL_IndicationProvider^512
E0^772^Critical^Unable to initialize part of the SAL/EFI interface^FPL_IndicationProvider^513
E0^777^Warning^/options settings for CPUBusConfigValue aren't compatible with PAL^FPL_IndicationProvider^2433
E0^778^Warning^The Get Processor Bus Dependent Configuration Features PAL call failed.^FPL_IndicationProvider^518
E0^786^Warning^EFI detected invalid internal privilege level^FPL_IndicationProvider^522
E0^813^Error^Duplicate Cpu Ids were detected within a cell.^FPL_IndicationProvider^546
E0^825^Warning^OS dump status  (EFxx)^FPL_IndicationProvider^549
E0^827^Warning^Setting processor response timeout failed^FPL_IndicationProvider^550
E0^834^Warning^Unable to increase privilege during EFI security initialization^FPL_IndicationProvider^553
E0^836^Warning^EFI unable to write privilege level during security initialization^FPL_IndicationProvider^554
E0^837^Warning^EFI was denied permission to write the privilege level during security init^FPL_IndicationProvider^555
E0^2938^Warning^The CPU Node reported a problem initializing its node in the device tree^FPL_IndicationProvider^2437
E0^2948^Warning^An error was encountered when executing a PAL_PROC^FPL_IndicationProvider^614
E0^3009^Error^CPUProcConfigValue in /options is not compatible with the current PAL/CPU^FPL_IndicationProvider^2439
E0^3010^Warning^Firmware was unable to determine the Processor Dependent Features^FPL_IndicationProvider^622
E0^3154^Warning^EFI unable to read initial debug level from the BMC^FPL_IndicationProvider^716
E0^3238^Error^Failure to identify a core cell during Global MCA.^FPL_IndicationProvider^741
E0^3758^Warning^SAL errlog access timeout^FPL_IndicationProvider^810
E0^3798^Warning^Firmware could not set Pal Proc features^FPL_IndicationProvider^2443
E0^3859^Warning^The FW tree sanity check failed during the MCA error processing.^FPL_IndicationProvider^840
E0^3860^Warning^This means that the registry sanity check failed during MCA error handling.^FPL_IndicationProvider^841
E0^3861^Warning^This means that MCA occurred while OS_MCA was performing error recovery.^FPL_IndicationProvider^842
E0^3864^Warning^One of the BT errors occurred that results in abandoning memory dump.^FPL_IndicationProvider^843
E0^3982^Warning^Status indicates that the Late Self Tests did not actually run^FPL_IndicationProvider^887
E0^4440^Error^FW will not handoff to the OS_MCA handler for this MCA event^FPL_IndicationProvider^941
E0^4658^Critical^PCI slot exceeds power limit^FPL_IndicationProvider^976
E0^4740^Error^The buffer size is too small for the XBC error log^FPL_IndicationProvider^1002
E0^4832^Error^It indicates loss of cell connectivity in the partition.^FPL_IndicationProvider^2448
E0^5430^Warning^An error was encountered when enabling or disabling threads.^FPL_IndicationProvider^4751
E0^5509^Warning^During Machine check, SAL cannot roundup the processors.^FPL_IndicationProvider^6855
E0^5510^Warning^SAL failed to clear the error logs for the platform CEC.  ^FPL_IndicationProvider^6856
E0^5628^Warning^The token has been initialized to the default value due to access errors.^FPL_IndicationProvider^4532
E0^5718^Critical^Memory allocation from SAL instance heap failed. (I.e., heap exhaustion)^FPL_IndicationProvider^4687
E0^5869^Error^SBA call to LBA Configure method fails in MCA path^FPL_IndicationProvider^4764
E0^6515^Warning^A CPU owned by one fPar tried to call a procedure in a firmware instance of a sibling fPar. This is an access violation. The call is rejected with the error status appropriate to that service (EFI or SAL)^FPL_IndicationProvider^4928
E0^6960^Warning^The System Firmware call to PAL_COPY_INFO failed.^FPL_IndicationProvider^5176
E0^6961^Warning^The System Firmware call to PAL_COPY_PAL failed.^FPL_IndicationProvider^5177
E0^6962^Warning^The System Firmware call to PAL_CACHE_FLUSH failed.^FPL_IndicationProvider^5178
E0^6971^Warning^An MCA occurred before a previous MCA event has been completely handled.^FPL_IndicationProvider^5180
E0^6972^Warning^MCA occurred while an INIT event is getting processed.^FPL_IndicationProvider^5181
E0^7217^Critical^HP-UX OS shutdown due to an MCA or INIT^FPL_IndicationProvider^6772
E0^7319^Error^OpenVMS BUGCHECK initiated^ ^ 
