To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
If using 4.12.14-94.41-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.sles12sp4.x86_64.rpm mlnx-ofa_kernel-kmp-default-4.9_k4.12.14_94.41-OFED.4.9.4.0.8.1.sles12sp4.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
If using 4.12.14-94.41-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.sles12sp4.x86_64.rpm mlnx-ofa_kernel-kmp-default-4.9_k4.12.14_94.41-OFED.4.9.4.0.8.1.sles12sp4.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Problems Fixed:
None
Known Issues:
None
Problems Fixed:
None
Known Issues:
None
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.01.01.a2_k1-1.rhel8u4.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.01.01.a2_k1-1.rhel8u4.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCHT Adapter (P21930-B21) | 14.32.1010 | MT_0000000414 |
| HPE Ethernet 10Gb/25Gb 2-port SFP28 MCX4621A-ACAB OCP3 Adapter (P11341-B21) | 14.32.1010 | MT_0000000238 |
| HPE Ethernet 100Gb 2-port QSFP28 MCX516A-CCHT Adapter (P21927-B21) | 16.32.1010 | MT_0000000417 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCHT Adapter (P21930-B21) | 14.32.1010 | MT_0000000414 |
| HPE Ethernet 10Gb/25Gb 2-port SFP28 MCX4621A-ACAB OCP3 Adapter (P11341-B21) | 14.32.1010 | MT_0000000238 |
| HPE Ethernet 100Gb 2-port QSFP28 MCX516A-CCHT Adapter (P21927-B21) | 16.32.1010 | MT_0000000417 |
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
]]>
]]>
To use Smart Update Manager from the Service Pack for ProLiant :
]]>
To use Smart Update Manager from the Service Pack for ProLiant :
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
This product contains driver version 1.7.4.0.
]]>This product contains driver version 1.7.4.0.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter | 800095B8 | 1.3082.0 | 3.00 |
The combo image v1.2992.0 includes: Intel(R) Boot Agent ICE v2.5.0 & UEFI x64 100 gigabit driver v3.0.11.
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter | 800095B8 | 1.3082.0 | 3.00 |
The combo image v1.2992.0 includes: Intel(R) Boot Agent ICE v2.5.0 & UEFI x64 100 gigabit driver v3.0.11.
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10/25Gb 2-port SFP28 MCX512F-ACHT Adapter(P13188-B21) | 16.32.1010 | MT_0000000416 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10/25Gb 2-port SFP28 MCX512F-ACHT Adapter(P13188-B21) | 16.32.1010 | MT_0000000416 |
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None.
]]>Updating firmware with rpm installation:
# ./CP0xxxxx.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-d3000-<version>-*' location
NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Offline:
Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>Updating firmware with rpm installation:
# ./CP0xxxxx.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-d3000-<version>-*' location
NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Offline:
Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.sles15sp2.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.sles15sp2.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 100Gb 1-port QSFP28 PCIe3 x16 MCX515A-CCAT Adapter(P31246-B21) | 16.31.1014 | MT_0000000591 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 100Gb 1-port QSFP28 PCIe3 x16 MCX515A-CCAT Adapter(P31246-B21) | 16.31.1014 | MT_0000000591 |
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Microsoft SNMP Service must be enabled, if SMA (System Management Assistant) is enabled.
]]>Microsoft SNMP Service must be enabled, if SMA (System Management Assistant) is enabled.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the service installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the service installation.
]]>1. Restart the AMS service (type 'net stop ams' followed by 'net start ams' in a command prompt) ...OR...
2. Create a new DWORD registry value named PollInterval in registry's HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hpeams\Parameters and set its value to higher than decimal 300. This value will determine how often (in seconds) AMS reads data from WMI.
]]>1. Restart the AMS service (type 'net stop ams' followed by 'net start ams' in a command prompt) ...OR...
2. Create a new DWORD registry value named PollInterval in registry's HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hpeams\Parameters and set its value to higher than decimal 300. This value will determine how often (in seconds) AMS reads data from WMI.
]]>Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download cp047662.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for cp047662.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file cp047662.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download cp047662.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for cp047662.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file cp047662.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
To update the driver using VMware tools:
To update the driver using VMware tools:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
None
Known Issues:
None
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Last Recommended or Critical Version:
HPK2
Previous Version of Firmware:
HPK2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:.
Known Issues:
None
Last Recommended or Critical Version:
HPK2
Previous Version of Firmware:
HPK2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:.
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download cp047197.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for cp047197.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file cp047197.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download cp047197.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for cp047197.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file cp047197.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
NOTE: Updated utilities and system libraries are required to support the iLO
HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility
does not currently support the CNSA security state.
Upgrading from a previous version of iLO
NOTE: Updated utilities and system libraries are required to support the iLO
HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility
does not currently support the CNSA security state.
Upgrading from a previous version of iLO
iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.32.1010 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.32.1010 | HP_2420110034 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.32.1010 | HPE0000000014 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.32.1010 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.32.1010 | HP_2420110034 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.32.1010 | HPE0000000014 |
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
None
Problems Fixed:
Enhancements/New Features:
None
Problems Fixed:
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media..
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media..
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE: All firmware flash progress messages are logged to /var/cpq/D3000.log and flash summary is logged to /var/cpq/Component.log.
]]>WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE: All firmware flash progress messages are logged to /var/cpq/D3000.log and flash summary is logged to /var/cpq/Component.log.
]]>NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Remote Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Remote Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5056 | HP_1360110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5056 | HP_1370110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5700 | HP_1380110017 |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5056 | HP_1360110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5056 | HP_1370110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5700 | HP_1380110017 |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
None
Problems Fixed:
Enhancements/New Features:
None
Problems Fixed:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
None
Known Issues:
None.
]]>Problems Fixed:
None
Known Issues:
None.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
# esxcli software vib install -d=<path><componet_bundle> --no-sig-check
# esxcli software vib remove -n=<filename.vib>
]]># esxcli software vib install -d=<path><componet_bundle> --no-sig-check
# esxcli software vib remove -n=<filename.vib>
]]>Additional Information:
Additional Information:
To update the driver using VMware tools:
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
]]>Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.32.1010 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.32.1010 | HP_2420110034 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.32.1010 | HPE0000000014 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.32.1010 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.32.1010 | HP_2420110034 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.32.1010 | HPE0000000014 |
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-rhel8u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-rhel8u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
• Added support for RHEL 8.4 and SLES15SP3.
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
• Added support for RHEL 8.4 and SLES15SP3.
Problems Fixed:
None
Known Issues:
None
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 548SFP+ Adapter (P11338-B21) | 14.32.1010 | HPE0000000038 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 548SFP+ Adapter (P11338-B21) | 14.32.1010 | HPE0000000038 |
WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE: All firmware flash progress messages are logged to /var/cpq/D6020.log and flash summary is logged to /var/cpq/Component.log.
]]>WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE: All firmware flash progress messages are logged to /var/cpq/D6020.log and flash summary is logged to /var/cpq/Component.log.
]]>Updating firmware with rpm installation:
# ./CP0xxxxx.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-d6020-<version>-*' location
NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Offline:
Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>Updating firmware with rpm installation:
# ./CP0xxxxx.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-d6020-<version>-*' location
NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Offline:
Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
4ICRHPK3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
4ICRHPK3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
Be noted that it needs the minimum version(combo image v8.55.12) for this firmware package, please refer to the following link to update firmware first.
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_c924ae49269f4d53b93dbb5ac5
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_829c3c2d15a641eeba5aebd3a2
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_117b0672d7ef4c5bb0eca02886
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
Be noted that it needs the minimum version(combo image v8.55.12) for this firmware package, please refer to the following link to update firmware first.
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_c924ae49269f4d53b93dbb5ac5
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_829c3c2d15a641eeba5aebd3a2
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_117b0672d7ef4c5bb0eca02886
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
A REBOOT is required for your computer when the setup is complete.
]]>A REBOOT is required for your computer when the setup is complete.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>Commands can also be executed from outside the SSA CLI console using the syntax: ssacli
Type "ssacli help" or type "help" at the CLI prompt for usage details.
]]>
Commands can also be executed from outside the SSA CLI console using the syntax: ssacli
Type "ssacli help" or type "help" at the CLI prompt for usage details.
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.32.1010 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.32.1010 | HP_2420110034 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.32.1010 | HPE0000000014 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.32.1010 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.32.1010 | HP_2420110034 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.32.1010 | HPE0000000014 |
A REBOOT is required for your computer when the setup is complete.
]]>A REBOOT is required for your computer when the setup is complete.
]]>Integrated Lights-Out 5 (iLO 5) Firmware version 1.40 and System ROM version 1.20 or later are required for HPE Gen10 servers.
]]>Integrated Lights-Out 5 (iLO 5) Firmware version 1.40 and System ROM version 1.20 or later are required for HPE Gen10 servers.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
This component can only be executed on Windows x64.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
This component can only be executed on Windows x64.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
None
Known Issues:
None
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features for:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features for:
Problems Fixed:
None
Known Issues:
None
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-2CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter | 80008271 | 1.2992.0 | 3.00 |
The combo image v1.2992.0 includes: Intel(R) Boot Agent ICE v2.5.0 & UEFI x64 100 gigabit driver v3.0.11.
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-2CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter | 80008271 | 1.2992.0 | 3.00 |
The combo image v1.2992.0 includes: Intel(R) Boot Agent ICE v2.5.0 & UEFI x64 100 gigabit driver v3.0.11.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
]]>
This method works if this component is already installed on the ESXi host and is running in the Auto mode.
Refer Server updates through iLO 5 in SUM User Guide
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>This method works if this component is already installed on the ESXi host and is running in the Auto mode.
Refer Server updates through iLO 5 in SUM User Guide
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>On the Web-based Management Device Homepage, under "options", "Anonymous Access" should be enabled when using SSA.
When clicking on a controller that is currently being configured in a different SSA session, a message will appear which allows you to override the other SSA session or cancel. If you choose to override the other SSA session, any unsaved changes in the other session will be discarded.
To uninstall SSA, use Add/Remove Programs located in the Control Panel on Windows Systems.
To run SSA in local application mode on Windows, Internet Explorer must be the default browser.
The following are known issues:
On the Web-based Management Device Homepage, under "options", "Anonymous Access" should be enabled when using SSA.
When clicking on a controller that is currently being configured in a different SSA session, a message will appear which allows you to override the other SSA session or cancel. If you choose to override the other SSA session, any unsaved changes in the other session will be discarded.
To uninstall SSA, use Add/Remove Programs located in the Control Panel on Windows Systems.
To run SSA in local application mode on Windows, Internet Explorer must be the default browser.
The following are known issues:
Additional Information:
Additional Information:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Also nvme-cli package version >=1.12 has to be installed
For NFC agent to work seamlessly, the following ports are required to be enabled on firewall:
NVMe-Rdma Drivers are required to be installed for NFC agent to work seamlessly.
]]>Also nvme-cli package version >=1.12 has to be installed
For NFC agent to work seamlessly, the following ports are required to be enabled on firewall:
NVMe-Rdma Drivers are required to be installed for NFC agent to work seamlessly.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-12.8.528.22-1.rhel8u5.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-12.8.528.22-1.rhel8u5.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
]]>
]]>
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
]]>This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD6
Previous Version of Firmware:
HPD6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
# ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
# ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
Additional Information:
Additional Information:
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version | CCM Version |
| HPE Ethernet 1Gb 2-port 330i Adapter (22BD) | 2.10 | 21.6.0 | 1.5.30 | 21.6.28 | 218.0.10.0 |
| HPE Ethernet 1Gb 4-port 331i Adapter (22BE) HPE Ethernet 1Gb 4-port 331FLR Adapter HPE Ethernet 1Gb 4-port 331T Adapter |
1.46 | 21.6.0 | 1.5.30 | 21.6.28 | 218.0.10.0 |
| HPE Ethernet 1Gb 2-port 332i Adapter (22E8) HPE Ethernet 1Gb 2-port 332T Adapter |
1.42 | 21.6.0 | 1.5.30 | 21.6.28 | 218.0.10.0 |
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version | CCM Version |
| HPE Ethernet 1Gb 2-port 330i Adapter (22BD) | 2.10 | 21.6.0 | 1.5.30 | 21.6.28 | 218.0.10.0 |
| HPE Ethernet 1Gb 4-port 331i Adapter (22BE) HPE Ethernet 1Gb 4-port 331FLR Adapter HPE Ethernet 1Gb 4-port 331T Adapter |
1.46 | 21.6.0 | 1.5.30 | 21.6.28 | 218.0.10.0 |
| HPE Ethernet 1Gb 2-port 332i Adapter (22E8) HPE Ethernet 1Gb 2-port 332T Adapter |
1.42 | 21.6.0 | 1.5.30 | 21.6.28 | 218.0.10.0 |
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Problems Fixed:
Known Issues:
None
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media..
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media..
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant :
To use Smart Update Manager from the Service Pack for ProLiant :
Windows:
Windows:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None.
]]>
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE: All firmware flash progress messages are logged to /var/cpq/D8000.log and flash summary is logged to /var/cpq/Component.log.
]]>WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE: All firmware flash progress messages are logged to /var/cpq/D8000.log and flash summary is logged to /var/cpq/Component.log.
]]>NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Remote Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Remote Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media..
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media..
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 200Gb 1-port QSFP56 MCX623105AS-VDAT Adapter (P10180-B21) | 22.31.1014 | MT_0000000435 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 200Gb 1-port QSFP56 MCX623105AS-VDAT Adapter (P10180-B21) | 22.31.1014 | MT_0000000435 |
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21) | 26.32.1010 | MT_0000000575 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21) | 26.32.1010 | MT_0000000575 |
]]>
WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE: All firmware flash progress messages are logged to /var/cpq/D6020.log and flash summary is logged to /var/cpq/Component.log.
]]>WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
NOTE: All firmware flash progress messages are logged to /var/cpq/D6020.log and flash summary is logged to /var/cpq/Component.log.
]]>NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Remote Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Remote Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-12.8.509.3-1.rhel8u4.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-12.8.509.3-1.rhel8u4.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
# ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
# ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
Additional Information:
Additional Information:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPK3
Last Recommended or Critical Version:
HPK2
Previous Version of Firmware:
HPK2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPK3
Last Recommended or Critical Version:
HPK2
Previous Version of Firmware:
HPK2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HP Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>To update firmware from VMware ESXi operating system on target server:
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>To update firmware from VMware ESXi operating system on target server:
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe4 x16 OCP3 MCX653435A-HDAI Adapter(P31323-B21) | 20.31.1014 | MT_0000000592 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe4 x16 OCP3 MCX653435A-HDAI Adapter(P31323-B21) | 20.31.1014 | MT_0000000592 |
]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPGG
Last Recommended or Critical Version:
HPGE
Previous Version of Firmware:
HPGE
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPGG
Last Recommended or Critical Version:
HPGE
Previous Version of Firmware:
HPGE
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
iLO 5 v1.20 or later
]]>iLO 5 v1.20 or later
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>http://www.hpe.com/storage/spock/
The HPE supplied Qlogic driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
]]>http://www.hpe.com/storage/spock/
The HPE supplied Qlogic driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
]]>Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.]]>
From that drive and directory, execute the downloaded file.]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Last Recommended or Critical Version:
MPK73H5Q
Previous Version of Firmware:
MPK73H5Q
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>Last Recommended or Critical Version:
MPK73H5Q
Previous Version of Firmware:
MPK73H5Q
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Last Recommended or Critical Version:
85031G00
Previous Version of Firmware:
85031G00
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
Last Recommended or Critical Version:
85031G00
Previous Version of Firmware:
85031G00
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To update firmware from VMware ESXi operating system on target server:
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>To update firmware from VMware ESXi operating system on target server:
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
MPK73H5Q
Previous Version of Firmware:
MPK73H5Q
Firmware Dependency:
None
Enhancements/New Features :
Problem Fixed:
Known Issues:
None
]]>Last Recommended or Critical Version:
MPK73H5Q
Previous Version of Firmware:
MPK73H5Q
Firmware Dependency:
None
Enhancements/New Features :
Problem Fixed:
Known Issues:
None
]]>Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
HPK3
Previous Version of Firmware:
HPK3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
HPK3
Previous Version of Firmware:
HPK3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>ssaducli -f adu-report.zip
To generate a SmartSSD Wear gauge report, enter the following command:
ssaducli -ssdrpt -f ssd-report.zip
More options can be found by "ssaducli -help".
Additional Notes
----------------
Both the diagnostic and SmartSSD wear gauge reports are generated in compressed
(ZIP) format.
The diagnostic report output archive contains the following files:
* ADUReport.txt => Diagnostic report in text format
* ADUReport.xml => Diagnostic report in XML format
* ADUReport.htm => HTML viewer for diagnostic report
* report.checksum => checksum file
* SlotX.txt (SlotX.old) => Controller serial output log
Note: The serial output log file(s) are only available if the "HPE Smart
Array SAS/SATA Event Notification Service" is installed and running.
To view the diagnostic report in a browser, extract the ADUReport.htm. Open
ADUReport.htm in the browser.
The SmartSSD wear gauge report output archive contains the following files:
* SmartSSDWearGaugeReport.txt => SmartSSD wear gauge report in text format
* SmartSSDWearGaugeReport.json => SmartSSD wear gauge report in JSON format
* SmartSSDWearGaugeReport.htm => HTML viewer for the JSON wear gauge report
To view the SmartSSD wear gauge report in a browser, extract the
SmartSSDWearGaugeReport.json, SmartSSDWearGaugeReport.htm files to a
directory (both files must reside in the same directory). Open
SmartSSDWearGaugeReport.htm in the browser.
Known Issues
------------
* When installing the 32-bit version of SSADUCLI on a system that has a
64-bit (x64) version of SSADUCLI installed, please uninstall the 64-bit
version first. Failing to uninstall the 64-bit version will cause the 32-bit
installation to fail.
ssaducli -f adu-report.zip
To generate a SmartSSD Wear gauge report, enter the following command:
ssaducli -ssdrpt -f ssd-report.zip
More options can be found by "ssaducli -help".
Additional Notes
----------------
Both the diagnostic and SmartSSD wear gauge reports are generated in compressed
(ZIP) format.
The diagnostic report output archive contains the following files:
* ADUReport.txt => Diagnostic report in text format
* ADUReport.xml => Diagnostic report in XML format
* ADUReport.htm => HTML viewer for diagnostic report
* report.checksum => checksum file
* SlotX.txt (SlotX.old) => Controller serial output log
Note: The serial output log file(s) are only available if the "HPE Smart
Array SAS/SATA Event Notification Service" is installed and running.
To view the diagnostic report in a browser, extract the ADUReport.htm. Open
ADUReport.htm in the browser.
The SmartSSD wear gauge report output archive contains the following files:
* SmartSSDWearGaugeReport.txt => SmartSSD wear gauge report in text format
* SmartSSDWearGaugeReport.json => SmartSSD wear gauge report in JSON format
* SmartSSDWearGaugeReport.htm => HTML viewer for the JSON wear gauge report
To view the SmartSSD wear gauge report in a browser, extract the
SmartSSDWearGaugeReport.json, SmartSSDWearGaugeReport.htm files to a
directory (both files must reside in the same directory). Open
SmartSSDWearGaugeReport.htm in the browser.
Known Issues
------------
* When installing the 32-bit version of SSADUCLI on a system that has a
64-bit (x64) version of SSADUCLI installed, please uninstall the 64-bit
version first. Failing to uninstall the 64-bit version will cause the 32-bit
installation to fail.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPK1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPK1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
http://www.hpe.com/storage/spock/
The HPE supplied Qlogic driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
]]>http://www.hpe.com/storage/spock/
The HPE supplied Qlogic driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
]]>Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>To update the driver using VMware tools:
To update the driver using VMware tools:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
The "iLO 5 Channel Interface Driver” (CHIF) for Linux which is integrated into the standard Linux kernel.
The "iLO 5 Channel Interface Driver” (CHIF) for Linux which is integrated into the standard Linux kernel.
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
]]>Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.rhel7u9.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.rhel7u9.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Online HDD/SSD Flash Component for Windows (x64) - EG0300FCSPH, EG0450FCSPK, EG0600FCSPL and EG0900FCSPN Drives
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Online HDD/SSD Flash Component for Windows (x64) - EG0300FCSPH, EG0450FCSPK, EG0600FCSPL and EG0900FCSPN Drives
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also includes emergency power off improvements.
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also includes emergency power off improvements.
Known Issues:
None
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 548SFP+ Adapter (P11338-B21) | 14.32.1010 | HPE0000000038 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 548SFP+ Adapter (P11338-B21) | 14.32.1010 | HPE0000000038 |
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
When the installation is complete, run command prompt environment and navigate to %programfiles%\MR Storage Administrator\StorCLI\bin folder and execute Storcli64.exe utility
For e.g: Storcli64.exe /c0 show
]]>Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
When the installation is complete, run command prompt environment and navigate to %programfiles%\MR Storage Administrator\StorCLI\bin folder and execute Storcli64.exe utility
For e.g: Storcli64.exe /c0 show
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Last Recommended or Critical Version:
EPK74H3Q
Previous Version of Firmware:
EPK74H3Q
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Last Recommended or Critical Version:
EPK74H3Q
Previous Version of Firmware:
EPK74H3Q
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-12.8.509.3_k5.3.18_51-1.sles15sp3.x86_64.rpm
4.When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using –force or --replacepkgs with --nodeps option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm –force --nodeps
rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm –replacepkgs --nodeps
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-12.8.509.3_k5.3.18_51-1.sles15sp3.x86_64.rpm
4.When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using –force or --replacepkgs with --nodeps option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm –force --nodeps
rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm –replacepkgs --nodeps
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Refer to VMware documentation for information on the esxcli commands
]]>Refer to VMware documentation for information on the esxcli commands
]]>To update the driver using VMware tools:
To update the driver using VMware tools:
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
Red Hat Enterprise Linux 7 Server (x86-64) FC Driver Kit for HPE Qlogic HBAs and mezzaine HBAs, version 10.02.01.00.a14-k1.
Red Hat Enterprise Linux 8 Server FC Driver Kit for HPE QLogic HBAs and mezzaine HBAs, version 10.02.01.01.a2-k1.
SUSE Linux Enterprise Server 12 FC Driver Kit for HPE Qlogic HBAs and mezzaine HBAs, version 10.02.01.00.a14-k1.
SUSE Linux Enterprise Server 15 FC Driver Kit for HPE QLogic HBAsand mezzaine HBAs, version 10.02.01.00.a14-k1.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
Red Hat Enterprise Linux 7 Server (x86-64) FC Driver Kit for HPE Qlogic HBAs and mezzaine HBAs, version 10.02.01.00.a14-k1.
Red Hat Enterprise Linux 8 Server FC Driver Kit for HPE QLogic HBAs and mezzaine HBAs, version 10.02.01.01.a2-k1.
SUSE Linux Enterprise Server 12 FC Driver Kit for HPE Qlogic HBAs and mezzaine HBAs, version 10.02.01.00.a14-k1.
SUSE Linux Enterprise Server 15 FC Driver Kit for HPE QLogic HBAsand mezzaine HBAs, version 10.02.01.00.a14-k1.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
To uninstall the QLogic Smart SAN enablement RPM use the following command:
# rpm -e hpe-qlogic-smartsan-enablement-<version>.noarch.rpm
This is a configurable component. It requires a configuration file in order to enable/disable Smart SAN functionality. If no configuration is performed, the current Smart SAN status is stated and the execution is complete. No further action is taken.
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
1. Login as the system administrator (root).
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install, type the following command at the prompt:
# rpm -ivh hpe-qlogic-smartsan-enablement-kit-<version>.x86_64.rpm
Example: # rpm -ivh hpe-qlogic-smartsan-enablement-kit-3.3-3.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Installation complete
To uninstall the QLogic Smart SAN enablement RPM use the following command:
# rpm -e hpe-qlogic-smartsan-enablement-<version>.noarch.rpm
This is a configurable component. It requires a configuration file in order to enable/disable Smart SAN functionality. If no configuration is performed, the current Smart SAN status is stated and the execution is complete. No further action is taken.
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
1. Login as the system administrator (root).
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install, type the following command at the prompt:
# rpm -ivh hpe-qlogic-smartsan-enablement-kit-<version>.x86_64.rpm
Example: # rpm -ivh hpe-qlogic-smartsan-enablement-kit-3.3-3.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Installation complete
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPGG
Last Recommended or Critical Version:
HPGE
Previous Version of Firmware:
HPGE
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPGG
Last Recommended or Critical Version:
HPGE
Previous Version of Firmware:
HPGE
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
Note: Per Microsoft kb #2031031(https://support.microsoft.com/en-us/kb/2931031), users cannot remove/unmount a USB until after the install has finished.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
Note: Per Microsoft kb #2031031(https://support.microsoft.com/en-us/kb/2931031), users cannot remove/unmount a USB until after the install has finished.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
None
Known Issues:
None
Problems Fixed:
None
Known Issues:
None
Additional Information:
Additional Information:
]]>
]]>
Updating firmware without installing rpm:
Updating firmware without installing rpm:
This software package contains the following firmware versions:
| OPA HFI Adapter Type | Firmware Version | SSID |
| HPE 100Gb 1-Port OP101 QSFP28 x8 OPA Adapter | 1.11.0.0.0 | E7 |
| HPE 100Gb 1-Port OP101 QSFP28 x16 OPA Adapter | 1.11.0.0.0 | E8 |
| HPE Apollo 100Gb 1-port Intel Omni-Path Architecture 860z Mezzanine FIO Adapter | 1.11.0.0.0 | 21C |
]]>
This software package contains the following firmware versions:
| OPA HFI Adapter Type | Firmware Version | SSID |
| HPE 100Gb 1-Port OP101 QSFP28 x8 OPA Adapter | 1.11.0.0.0 | E7 |
| HPE 100Gb 1-Port OP101 QSFP28 x16 OPA Adapter | 1.11.0.0.0 | E8 |
| HPE Apollo 100Gb 1-port Intel Omni-Path Architecture 860z Mezzanine FIO Adapter | 1.11.0.0.0 | 21C |
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant :
]]>
To use Smart Update Manager from the Service Pack for ProLiant :
]]>
Release Version and/or Date:
1.00(C)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
1.00(C)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
None
Known Issues:
None
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
amsd only supported on HPE Gen10/Gen10 Plus Servers.
amsd provides information to the iLO 5 service providing SNMP support.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = Red Hat Enterprise Linux 7.3 Errata 3.10.0.514.6.1
amsd only supported on HPE Gen10/Gen10 Plus Servers.
amsd provides information to the iLO 5 service providing SNMP support.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = Red Hat Enterprise Linux 7.3 Errata 3.10.0.514.6.1
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>Click the Install button to proceed with the installation.
]]>| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCHT Adapter (P21930-B21) | 14.32.1010 | MT_0000000414 |
| HPE Ethernet 10Gb/25Gb 2-port SFP28 MCX4621A-ACAB OCP3 Adapter (P11341-B21) | 14.32.1010 | MT_0000000238 |
| HPE Ethernet 100Gb 2-port QSFP28 MCX516A-CCHT Adapter (P21927-B21) | 16.32.1010 | MT_0000000417 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCHT Adapter (P21930-B21) | 14.32.1010 | MT_0000000414 |
| HPE Ethernet 10Gb/25Gb 2-port SFP28 MCX4621A-ACAB OCP3 Adapter (P11341-B21) | 14.32.1010 | MT_0000000238 |
| HPE Ethernet 100Gb 2-port QSFP28 MCX516A-CCHT Adapter (P21927-B21) | 16.32.1010 | MT_0000000417 |
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
4ICDHPK1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
4ICDHPK1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant :
]]>
To use Smart Update Manager from the Service Pack for ProLiant :
]]>
Release Version and/or Date:
NA
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
NA
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Last Recommended or Critical Version:
85031G00
Previous Version of Firmware:
85031G00
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
Last Recommended or Critical Version:
85031G00
Previous Version of Firmware:
85031G00
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
]]>
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None.
]]>
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
The "iLO 5 Channel Interface Driver” (CHIF) for Windows which is available from Service Pack for ProLiant (SPP).
]]>The "iLO 5 Channel Interface Driver” (CHIF) for Windows which is available from Service Pack for ProLiant (SPP).
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware with rpm installed:
# ./CP048326.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/x86_64-linux-gnu/firmware-nvdimm-16gb-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Updating firmware with rpm installed:
# ./CP048326.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./hpsetup in the '/usr/lib/x86_64-linux-gnu/firmware-nvdimm-16gb-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use HP Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Linux:
VMWare:
Linux:
VMWare:
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE InfiniBand HDR100/Ethernet 100Gb 2-port MCX653106A-ECAT QSFP56 x16 Adapter(P23666-B21) | 20.31.1014 | MT_0000000453 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE InfiniBand HDR100/Ethernet 100Gb 2-port MCX653106A-ECAT QSFP56 x16 Adapter(P23666-B21) | 20.31.1014 | MT_0000000453 |
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
The management interface driver must be installed on the server.
Microsoft .Net Framework 2.0 or later is required to launch HPONCFG GUI.
]]>The management interface driver must be installed on the server.
Microsoft .Net Framework 2.0 or later is required to launch HPONCFG GUI.
]]>Place Component to a directory in a temporary directory on your hard drive. Double-click it to run.
Click on the install button to install the utlility on the server. This does not require a reboot.
The utility will be installed in the program files under the directory HewlettPackardEnterprise\HPONCFG\
A shortcut for the graphical interface of the utility will be provided in "Start Menu > Programs > HPE System Tools > HPE Lights-Out Online Configuration Utility".
]]>Place Component to a directory in a temporary directory on your hard drive. Double-click it to run.
Click on the install button to install the utlility on the server. This does not require a reboot.
The utility will be installed in the program files under the directory HewlettPackardEnterprise\HPONCFG\
A shortcut for the graphical interface of the utility will be provided in "Start Menu > Programs > HPE System Tools > HPE Lights-Out Online Configuration Utility".
]]>To update the driver using VMware tools:
To update the driver using VMware tools:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also includes emergency power off improvements.
Known Issues:
None
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also includes emergency power off improvements.
Known Issues:
None
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.sles12sp5.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.sles12sp5.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
HPGA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
HPGA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 2-port QSFP56 PCIe4 x16 OCP3 MCX653436A-HDAI Adapter (P31348-B21) | 20.32.1010 | MT_0000000593 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 2-port QSFP56 PCIe4 x16 OCP3 MCX653436A-HDAI Adapter (P31348-B21) | 20.32.1010 | MT_0000000593 |
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>IMPORTANT UPDATE: SSA (GUI) for Linux can now be run without requiring the System Management Homepage. SSA now supports a Local Application Mode for Linux. The System Management Homepage is still supported, but no longer required to run the SSA GUI.
To invoke, enter the following at the command prompt:
ssa -local
The command will start SSA in a new Firefox browser window. When the browser window is closed, SSA will automatically stop. This is only valid for the loopback interface, and not visible to external network connections.
IMPORTANT UPDATE: SSA (GUI) for Linux can now be run without requiring the System Management Homepage. SSA now supports a Local Application Mode for Linux. The System Management Homepage is still supported, but no longer required to run the SSA GUI.
To invoke, enter the following at the command prompt:
ssa -local
The command will start SSA in a new Firefox browser window. When the browser window is closed, SSA will automatically stop. This is only valid for the loopback interface, and not visible to external network connections.
]]>
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>~# esxcli software vib install -v <path><filename.vib>
]]>~# esxcli software vib install -v <path><filename.vib>
]]>]]>
]]>
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-12.8.509.3-1.rhel8u4.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-12.8.509.3-1.rhel8u4.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter (P06154-B21) | 20.32.1010 | HPE0000000034 |
| HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter (P06250-B21) | 20.32.1010 | HPE0000000035 |
| HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter (P06251-B21) | 20.32.1010 | HPE0000000036 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter (P06154-B21) | 20.32.1010 | HPE0000000034 |
| HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter (P06250-B21) | 20.32.1010 | HPE0000000035 |
| HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter (P06251-B21) | 20.32.1010 | HPE0000000036 |
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5056 | HP_1360110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5056 | HP_1370110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5700 | HP_1380110017 |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5056 | HP_1360110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5056 | HP_1370110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5700 | HP_1380110017 |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
4ICSHPK4
Last Recommended or Critical Version:
4ICSHPK2
Previous Version of Firmware:
4ICSHPK2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
4ICSHPK4
Last Recommended or Critical Version:
4ICSHPK2
Previous Version of Firmware:
4ICSHPK2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Last Recommended or Critical Version:
HPK2
Previous Version of Firmware:
HPK2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>
Last Recommended or Critical Version:
HPK2
Previous Version of Firmware:
HPK2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.06.02_k1-1.rhel8u5.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.06.02_k1-1.rhel8u5.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter | 80008265 | 1.2992.0 | 3.00 |
he combo image v1.2992.0 includes: Intel(R) Boot Agent ICE v2.5.0 & UEFI x64 100 gigabit driver v3.0.11.
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter | 80008265 | 1.2992.0 | 3.00 |
he combo image v1.2992.0 includes: Intel(R) Boot Agent ICE v2.5.0 & UEFI x64 100 gigabit driver v3.0.11.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware without installing rpm:
Updating firmware without installing rpm:
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5056 | HP_1360110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5056 | HP_1370110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5700 | HP_1380110017 |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5056 | HP_1360110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5056 | HP_1370110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5700 | HP_1380110017 |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None.
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None.
]]>From that drive and directory, execute the downloaded file.]]>
From that drive and directory, execute the downloaded file.]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
NOTE: Updated utilities and system libraries are required to support the iLO
HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility
does not currently support the CNSA security state.
Upgrading from a previous version of iLO
NOTE: Updated utilities and system libraries are required to support the iLO
HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility
does not currently support the CNSA security state.
Upgrading from a previous version of iLO
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
85031G00
Previous Version of Firmware:
85031G00
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
Last Recommended or Critical Version:
85031G00
Previous Version of Firmware:
85031G00
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P42041-B21) | 26.32.1010 | MT_0000000551 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P42041-B21) | 26.32.1010 | MT_0000000551 |
]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HPE Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional Information:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HPE Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional Information:
Release Version and/or Date:
1.00(C)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
1.00(C)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
T
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
T
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Additional Information:
Additional Information:
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]># rpm -ivh elx-nvmefc-connect-<version>.noarch.rpm
To upgrade the elx-nvmefc-connect RPM use the following command:
# rpm -Uvh elx-nvmefc-connect-<version>.noarch.rpm
]]># rpm -ivh elx-nvmefc-connect-<version>.noarch.rpm
To upgrade the elx-nvmefc-connect RPM use the following command:
# rpm -Uvh elx-nvmefc-connect-<version>.noarch.rpm
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
HPE Gen10 Innovation Engine (IE) Firmware version 0.1.5.2 or later
The "iLO 5 Channel Interface Driver” (CHIF) for Windows which is available from Service Pack for ProLiant (SPP).
]]>HPE Gen10 Innovation Engine (IE) Firmware version 0.1.5.2 or later
The "iLO 5 Channel Interface Driver” (CHIF) for Windows which is available from Service Pack for ProLiant (SPP).
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]> # rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
# rpm -e hp-fc-enablement-<version>.noarch.rpm
To install the hp-CNA-fc-enablement RPM use the following command:
# rpm -ivh HP-CNA-FC-Broadcom-Enablement-Kit-<version>.<OS>.<architecture>.rpm
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Click the Install button to proceed with the installation.
]]>Click the Install button to proceed with the installation.
]]>| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5056 | HP_1360110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5056 | HP_1370110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5700 | HP_1380110017 |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5056 | HP_1360110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5056 | HP_1370110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5700 | HP_1380110017 |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPGG
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPGB
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPGG
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPGB
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Last Recommended or Critical Version:
EPK74H3Q
Previous Version of Firmware:
EPK74H3Q
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Last Recommended or Critical Version:
EPK74H3Q
Previous Version of Firmware:
EPK74H3Q
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPS4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPS4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 1-port MCX653105A-HDAT QSFP56 x16 Adapter (P23664-B21) | 20.31.1014 | MT_0000000451 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 1-port MCX653105A-HDAT QSFP56 x16 Adapter (P23664-B21) | 20.31.1014 | MT_0000000451 |
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware with rpm installed:
# ./ CP049221.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-smartarray-2e20068436-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
]]>
Updating firmware with rpm installed:
# ./ CP049221.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-smartarray-2e20068436-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Problems Fixed:
None
Known Issues:
None
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>The libibverb package must be installed on the target system prior to the installation of the RoCE library. If not already present, the libibverb package can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library on SUSE Linux Enterprise Server 15.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library on SUSE Linux Enterprise Server 15.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe (or) chmod +x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe (or) chmod +x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
NA
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
NA
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Online firmware update fails when drives are connected behind AHCI controller.
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Online firmware update fails when drives are connected behind AHCI controller.
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
HPE Storage Fibre Channel Adapter Kit for the x64 Emulex Storport Driver v12.8.518.0 cp047332.exe
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
HPE Storage Fibre Channel Adapter Kit for the x64 Emulex Storport Driver v12.8.518.0 cp047332.exe
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
]]>
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
If using 5.3.18-22-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.sles15sp2.x86_64.rpm mlnx-ofa_kernel-kmp-default-4.9_k5.3.18_22-OFED.4.9.4.0.8.1.sles15sp2.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
If using 5.3.18-22-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.sles15sp2.x86_64.rpm mlnx-ofa_kernel-kmp-default-4.9_k5.3.18_22-OFED.4.9.4.0.8.1.sles15sp2.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
If using kernel version 3.10.0-1160.el7.x86_64 or any future errata:
# rpm -Uvh kmod-mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.rhel7u9.x86_64.rpm mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.rhel7u9.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
If using kernel version 3.10.0-1160.el7.x86_64 or any future errata:
# rpm -Uvh kmod-mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.rhel7u9.x86_64.rpm mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.rhel7u9.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10/25Gb 2-port SFP28 MCX562A-ACAI OCP3 Adapter(P10112-B21) | 16.32.1010 | MT_0000000241 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10/25Gb 2-port SFP28 MCX562A-ACAI OCP3 Adapter(P10112-B21) | 16.32.1010 | MT_0000000241 |
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPGG
Last Recommended or Critical Version:
HPGE
Previous Version of Firmware:
HPGE
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPGG
Last Recommended or Critical Version:
HPGE
Previous Version of Firmware:
HPGE
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>To update the driver using VMware tools:
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGA
Previous Version of Firmware:
HPGA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPGA
Previous Version of Firmware:
HPGA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qla2xxx-4.6.28-20.rhel6u1.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To install or upgrade the driver:
If using 4.12.14-120-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-5.5-OFED.5.5.0.4.4.1.sles12sp5.x86_64.rpm mlnx-ofa_kernel-kmp-default-5.5_k4.12.14_120-OFED.5.5.0.4.4.1.sles12sp5.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
To install or upgrade the driver:
If using 4.12.14-120-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-5.5-OFED.5.5.0.4.4.1.sles12sp5.x86_64.rpm mlnx-ofa_kernel-kmp-default-5.5_k4.12.14_120-OFED.5.5.0.4.4.1.sles12sp5.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed
None
Known Issues:
None
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>To update the driver using VMware tools:
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]> To use Smart Update Manager from the Service Pack for ProLiant:
Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
1.79(C)
Last Recommended or Critical Version:
1.79(C)
Previous Version of Firmware:
1.79(B)
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Drive may show up missing after a system reboot.
Known Issues:
None
Release Version and/or Date:
1.79(C)
Last Recommended or Critical Version:
1.79(C)
Previous Version of Firmware:
1.79(B)
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Drive may show up missing after a system reboot.
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-12.8.509.3_k5.3.18_51-1.sles15sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using –reinstall option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm –reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-12.8.509.3_k5.3.18_51-1.sles15sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using –reinstall option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm –reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPGG
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPGB
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPGG
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPGB
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware with rpm installed:
# ./ CP042957.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-smartarray-40023de47f-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
]]>Updating firmware with rpm installed:
# ./ CP042957.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-smartarray-40023de47f-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>To update the driver using VMware tools:
To update the driver using VMware tools:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
EPK74H3Q
Previous Version of Firmware:
EPK74H3Q
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Last Recommended or Critical Version:
EPK74H3Q
Previous Version of Firmware:
EPK74H3Q
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
http://www.hpe.com/storage/spock/
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
]]>http://www.hpe.com/storage/spock/
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
]]>This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 12 service pack 4 and SuSE Linux Enterprise Server 12 service pack 5 has to be performed using –force or --replacepkgs with --nodeps option
Example: rpm –Uvh HPE-CNA-FC-hpeqlgc-Enablement-Kit-<version>.noarch.rpm --force --nodeps
rpm –Uvh HPE-CNA-FC-hpeqlgc-Enablement-Kit-<version>.noarch.rpm --replacepkgs --nodeps
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 15 service pack 1 and SuSE Linux Enterprise Server 15 service pack 2 has to be performed using --reinstall option
Example: rpm –Uvh HPE-CNA-FC-hpeqlgc-Enablement-Kit-<version>.noarch.rpm --force --nodeps
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 12 service pack 4 and SuSE Linux Enterprise Server 12 service pack 5 has to be performed using –force or --replacepkgs with --nodeps option
Example: rpm –Uvh HPE-CNA-FC-hpeqlgc-Enablement-Kit-<version>.noarch.rpm --force --nodeps
rpm –Uvh HPE-CNA-FC-hpeqlgc-Enablement-Kit-<version>.noarch.rpm --replacepkgs --nodeps
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 15 service pack 1 and SuSE Linux Enterprise Server 15 service pack 2 has to be performed using --reinstall option
Example: rpm –Uvh HPE-CNA-FC-hpeqlgc-Enablement-Kit-<version>.noarch.rpm --force --nodeps
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Release Version and/or Date:
1.56(D)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
1.56(D)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To update the driver using VMware tools:
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
# esxcli software vib install -v=<path><filename.vib> --no-sig-check
# esxcli software vib remove -n=<filename.vib>
]]># esxcli software vib install -v=<path><filename.vib> --no-sig-check
# esxcli software vib remove -n=<filename.vib>
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]># esxcli software vib install -v=<path><filename.vib> --no-sig-check
# esxcli software vib remove -n=<filename.vib>
]]># esxcli software vib install -v=<path><filename.vib> --no-sig-check
# esxcli software vib remove -n=<filename.vib>
]]>To update the driver using VMware tools:
To update the driver using VMware tools:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
]]>
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
4ICRHPK3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
4ICRHPK3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Problems Fixed:
None
Known Issues:
None
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>http://www.hpe.com/storage/spock/
The target environment must have the libHBAAPI Package installed prior to the installation of the firmware as the discovery of adapters might not complete without the library. (If not already present, the libHBAAPI Package can be obtained from the operating system installation media.)
The HPE supplied enablement kit must be installed prior to this firmware component being identified by SUM for deployment.
The OOB driver and enablement kit are available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
It is advised to provide read-write permissions on /var/tmp folder. Firmware deployment via Service Pack for ProLiant(SPP) might be unsuccessful in some cases , if read-write(rw) permissions are not enable on /tmp or /var/tmp directories.
http://www.hpe.com/storage/spock/
The target environment must have the libHBAAPI Package installed prior to the installation of the firmware as the discovery of adapters might not complete without the library. (If not already present, the libHBAAPI Package can be obtained from the operating system installation media.)
The HPE supplied enablement kit must be installed prior to this firmware component being identified by SUM for deployment.
The OOB driver and enablement kit are available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
It is advised to provide read-write permissions on /var/tmp folder. Firmware deployment via Service Pack for ProLiant(SPP) might be unsuccessful in some cases , if read-write(rw) permissions are not enable on /tmp or /var/tmp directories.
NOTE: During the flash operation, the message "No Adapter Found!" may appear in the logs. These messages do not indicate a problem with the firmware flash operation and may be ignored.
It is advised to provide read-write permissions on /var/tmp folder. Firmware deployment via Service Pack for ProLiant(SPP) might be unsuccessful in some cases , if read-write(rw) permissions are not enable on /tmp or /var/tmp directories.
NOTE: During the flash operation, the message "No Adapter Found!" may appear in the logs. These messages do not indicate a problem with the firmware flash operation and may be ignored.
It is advised to provide read-write permissions on /var/tmp folder. Firmware deployment via Service Pack for ProLiant(SPP) might be unsuccessful in some cases , if read-write(rw) permissions are not enable on /tmp or /var/tmp directories.
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
Enhancements/New Features:
Problems Fixed:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fix
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fix
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None.
]]>Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Prolems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Prolems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant :
To use Smart Update Manager from the Service Pack for ProLiant :
Problems Fixed:
Over-temp issue was a false IML due to a >=60C threshold, modified the threshold to >65C in new version.
Known Issues:
None
Problems Fixed:
Over-temp issue was a false IML due to a >=60C threshold, modified the threshold to >65C in new version.
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPS4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPS4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the Install button to proceed with the installation.
Note: In order to upgrade CX5 network adapter firmware from 16.21.1xxx or 16.22.1xxx (or earlier) to 16.26.1xxx (or later), use 16.23.1xxx or 16.24.1xxx or 16.25.1xxx as intermediate firmware version
]]>
From that drive and directory, execute the downloaded file.
Click the Install button to proceed with the installation.
Note: In order to upgrade CX5 network adapter firmware from 16.21.1xxx or 16.22.1xxx (or earlier) to 16.26.1xxx (or later), use 16.23.1xxx or 16.24.1xxx or 16.25.1xxx as intermediate firmware version
]]>
| InfiniBand Card Type | Firmware Version | PSID |
| HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter (843400-B21) | 12.28.2006 |
HPE2920111032 |
| HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter (872723-B21) | 16.32.1010 | HPE0000000017 |
| HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter (872725-B21) | 16.32.1010 | HPE0000000008 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter (843400-B21) | 12.28.2006 |
HPE2920111032 |
| HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter (872723-B21) | 16.32.1010 | HPE0000000017 |
| HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter (872725-B21) | 16.32.1010 | HPE0000000008 |
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
When the installation is complete, run command prompt environment and navigate to %programfiles%\MR Storage Administrator\StorCLI\bin folder and execute Storcli64.exe utility
For e.g: Storcli64.exe /c0 show
]]>Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
When the installation is complete, run command prompt environment and navigate to %programfiles%\MR Storage Administrator\StorCLI\bin folder and execute Storcli64.exe utility
For e.g: Storcli64.exe /c0 show
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download cp047662.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for cp047662.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file cp047662.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download cp047662.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for cp047662.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file cp047662.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCHT Adapter (P21930-B21) | 14.32.1010 | MT_0000000414 |
| HPE Ethernet 10Gb/25Gb 2-port SFP28 MCX4621A-ACAB OCP3 Adapter (P11341-B21) | 14.32.1010 | MT_0000000238 |
| HPE Ethernet 100Gb 2-port QSFP28 MCX516A-CCHT Adapter (P21927-B21) | 16.32.1010 | MT_0000000417 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCHT Adapter (P21930-B21) | 14.32.1010 | MT_0000000414 |
| HPE Ethernet 10Gb/25Gb 2-port SFP28 MCX4621A-ACAB OCP3 Adapter (P11341-B21) | 14.32.1010 | MT_0000000238 |
| HPE Ethernet 100Gb 2-port QSFP28 MCX516A-CCHT Adapter (P21927-B21) | 16.32.1010 | MT_0000000417 |
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None
]]>Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None
]]>HPE Gen10 Innovation Engine (IE) Firmware version 0.1.5.2 or later
The "iLO 5 Channel Interface Driver” (CHIF) for Windows which is available from Service Pack for ProLiant (SPP).
]]>HPE Gen10 Innovation Engine (IE) Firmware version 0.1.5.2 or later
The "iLO 5 Channel Interface Driver” (CHIF) for Windows which is available from Service Pack for ProLiant (SPP).
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPGG
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPGB
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPGG
Last Recommended or Critical Version:
HPGB
Previous Version of Firmware:
HPGB
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware without installing rpm:
Updating firmware without installing rpm:
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCHT Adapter (P21930-B21) | 14.32.1010 | MT_0000000414 |
| HPE Ethernet 10Gb/25Gb 2-port SFP28 MCX4621A-ACAB OCP3 Adapter (P11341-B21) | 14.32.1010 | MT_0000000238 |
| HPE Ethernet 100Gb 2-port QSFP28 MCX516A-CCHT Adapter (P21927-B21) | 16.32.1010 | MT_0000000417 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCHT Adapter (P21930-B21) | 14.32.1010 | MT_0000000414 |
| HPE Ethernet 10Gb/25Gb 2-port SFP28 MCX4621A-ACAB OCP3 Adapter (P11341-B21) | 14.32.1010 | MT_0000000238 |
| HPE Ethernet 100Gb 2-port QSFP28 MCX516A-CCHT Adapter (P21927-B21) | 16.32.1010 | MT_0000000417 |
This is a self extracting executable module. One can execute this module via the command line console or from Windows graphical user interface.
GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Online:
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>This is a self extracting executable module. One can execute this module via the command line console or from Windows graphical user interface.
GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Online:
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To update firmware from Windows operating system on target server:
To use Smart Update Manager from the Service Pack for ProLiant :
]]>
To update firmware from Windows operating system on target server:
To use Smart Update Manager from the Service Pack for ProLiant :
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Problems Fixed:
None
Known Issues:
None.
]]>Problems Fixed:
None
Known Issues:
None.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
Release Version and/or Date:
HPGB
Last Recommended or Critical Version:
HPG7
Previous Version of Firmware:
HPG7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 100Gb 2-Port QSFP56 MCX623106AS-CDAT Adapter(P25960-B21) | 22.31.1014 | MT_0000000437 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 100Gb 2-Port QSFP56 MCX623106AS-CDAT Adapter(P25960-B21) | 22.31.1014 | MT_0000000437 |
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Last Recommended or Critical Version:
MPK73H5Q
Previous Version of Firmware:
MPK73H5Q
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>Last Recommended or Critical Version:
MPK73H5Q
Previous Version of Firmware:
MPK73H5Q
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.01.00.a14_k1_k5.3.18_53-1.sles15sp3.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Rewrite of same Driver version has to be performed using –reinstall option
Example: rpm –Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm –reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.01.00.a14_k1_k5.3.18_53-1.sles15sp3.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Rewrite of same Driver version has to be performed using –reinstall option
Example: rpm –Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm –reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>http://www.hpe.com/storage/spock/
The HPE supplied Emulex driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
]]>http://www.hpe.com/storage/spock/
The HPE supplied Emulex driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
http://www.hpe.com/storage/spock/
The OOB NIC driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
Additional requirements:
The target environment must have the libsysfs or sysfsutils package installed prior to the installation of the firmware update kit. If not already present, the libsysfs or sysfsutils package can be obtained from the operating system installation media.
Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex HBAs/CNAs
Environment must be running the syslog daemon for the flash engine to run
Note: To enable the FCoE/iSCSI protocol on devices that support it, please install the appropriate Emulex FCoE/iSCSI driver. The FCoE protocol also requires the HPE Emulex FCoE Enablement Kit be installed. The drivers and enablement kit are also available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
Install the FCoE Driver Kit, reboot, and then install the Enablement Kit.
]]>http://www.hpe.com/storage/spock/
The OOB NIC driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
Additional requirements:
The target environment must have the libsysfs or sysfsutils package installed prior to the installation of the firmware update kit. If not already present, the libsysfs or sysfsutils package can be obtained from the operating system installation media.
Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex HBAs/CNAs
Environment must be running the syslog daemon for the flash engine to run
Note: To enable the FCoE/iSCSI protocol on devices that support it, please install the appropriate Emulex FCoE/iSCSI driver. The FCoE protocol also requires the HPE Emulex FCoE Enablement Kit be installed. The drivers and enablement kit are also available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
Install the FCoE Driver Kit, reboot, and then install the Enablement Kit.
]]> 2. cd to the appropriate location for your system, and update the firmware by executing ./.setup
When the firmware installation completes, you may remove the firmware installation tool from your system using the rpm -e command: rpm -e <rpm_package_name>.
2. cd to the appropriate location for your system, and update the firmware by executing ./.setup
When the firmware installation completes, you may remove the firmware installation tool from your system using the rpm -e command: rpm -e <rpm_package_name>.
# ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
# ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
Additional Information:
Additional Information:
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version | CCM Version |
| BCM 5720 1GbE 2p BASE-T LOM Adptr | 1.42 | 21.6.0 | 1.5.30 | 21.6.28 | 218.0.10.0 |
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version | CCM Version |
| BCM 5720 1GbE 2p BASE-T LOM Adptr | 1.42 | 21.6.0 | 1.5.30 | 21.6.28 | 218.0.10.0 |
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
This is a self extracting executable module. One can execute this module via the command line console or from Windows graphical user interface.
GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Online:
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>This is a self extracting executable module. One can execute this module via the command line console or from Windows graphical user interface.
GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Online:
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Updating firmware without installing rpm:
Updating firmware without installing rpm:
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.32.1010 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.32.1010 | HP_2420110034 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.32.1010 | HPE0000000014 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.32.1010 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.32.1010 | HP_2420110034 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.32.1010 | HPE0000000014 |
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also includes emergency power off improvements.
Known Issues:
None
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also includes emergency power off improvements.
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Additional Information:
Additional Information:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE InfiniBand HDR100/Ethernet 100Gb 1-port MCX653105A-ECAT QSFP56 x16 Adapter(P23665-B21) | 20.31.1014 | MT_0000000452 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE InfiniBand HDR100/Ethernet 100Gb 1-port MCX653105A-ECAT QSFP56 x16 Adapter(P23665-B21) | 20.31.1014 | MT_0000000452 |
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>Updating firmware without installing rpm:
Updating firmware without installing rpm:
| InfiniBand Card Type | Firmware Version | PSID |
| HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter (843400-B21) | 12.28.2006 |
HPE2920111032 |
| HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter (872723-B21) | 16.32.1010 | HPE0000000017 |
| HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter (872725-B21) | 16.32.1010 | HPE0000000008 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter (843400-B21) | 12.28.2006 |
HPE2920111032 |
| HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter (872723-B21) | 16.32.1010 | HPE0000000017 |
| HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter (872725-B21) | 16.32.1010 | HPE0000000008 |
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the Install button to proceed with the installation.
Note: In order to upgrade CX5 network adapter firmware from 16.21.1xxx or 16.22.1xxx (or earlier) to 16.26.1xxx (or later), use 16.23.1xxx or 16.24.1xxx or 16.25.1xxx as intermediate firmware version.
]]>From that drive and directory, execute the downloaded file.
Click the Install button to proceed with the installation.
Note: In order to upgrade CX5 network adapter firmware from 16.21.1xxx or 16.22.1xxx (or earlier) to 16.26.1xxx (or later), use 16.23.1xxx or 16.24.1xxx or 16.25.1xxx as intermediate firmware version.
]]>| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.28.2006 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.28.2006 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.32.1010 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.32.1010 | HPE0000000022 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.28.2006 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.28.2006 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.32.1010 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.32.1010 | HPE0000000022 |
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-12.8.509.3-1.rhel8u4.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-12.8.509.3-1.rhel8u4.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
HPD5
Previous Version of Firmware:
HPD5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use HPE Smart Update Manager from the Service Pack for ProLiant :
]]>
To use HPE Smart Update Manager from the Service Pack for ProLiant :
]]>
Click the Install button to proceed with the installation.
]]>Click the Install button to proceed with the installation.
]]>| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 548SFP+ Adapter (P11338-B21) | 14.32.1010 | HPE0000000038 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 548SFP+ Adapter (P11338-B21) | 14.32.1010 | HPE0000000038 |
To update firmware from VMware ESXi operating system on target server:
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>To update firmware from VMware ESXi operating system on target server:
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>chmod +x CPXXXXXX.vmexe
chmod +x CPXXXXXX.vmexe
Problems Fixed:
Known Issues:
None
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
To update the driver using VMware tools:
To update the driver using VMware tools:
Updating firmware with rpm installed:
# ./ CP049068.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-8586fe2547-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
]]>
Updating firmware with rpm installed:
# ./ CP049068.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-8586fe2547-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
]]>
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The latest Emulex FC driver 12.8.351.7 is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The latest Emulex FC driver 12.8.351.7 is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
]]>
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 2-port QSFP56 PCIe4 x16 MCX653106A-HDAT Adapter(P31324-B21) | 20.32.1010 | MT_0000000594 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 2-port QSFP56 PCIe4 x16 MCX653106A-HDAT Adapter(P31324-B21) | 20.32.1010 | MT_0000000594 |
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.rhel7u8.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh brcmfcoe-kmp-default-11.2.xxxx.x_3.0.76._0.11-1.rhel7u8.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e brcmfcoe-<kerneltype><version>.<OSupdate>.x86_64
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware with rpm installation:
# ./CP0xxxxx.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-d8000-<version>-*' location
NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Offline:
Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>Updating firmware with rpm installation:
# ./CP0xxxxx.scexe in the '/usr/lib/x86_64-linux-gnu/hp-scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-d8000-<version>-*' location
NOTES:
OPTIONS for in band enclosure flash
| -d, --discover <absolute path to file> | Dumps discovery information in XML format to <file> |
| -e, --reflash | Flash even if the device is already up to date |
| -f, --force | Always flash applicable devices (same as -e -g) |
| -g, --downgrade | Flash if the device has a later firmware |
| -s, --silent | Do not display any text and no user interaction required |
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Offline:
Online:
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
amsd only supported on HPE Gen10/Gen10 Plus Servers.
amsd provides information to the iLO 5 service providing SNMP support.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = SUSE Linux Enterprise Server 12 SP2
amsd only supported on HPE Gen10/Gen10 Plus Servers.
amsd provides information to the iLO 5 service providing SNMP support.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = SUSE Linux Enterprise Server 12 SP2
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Added support for RHEL 8.4 and SLES15SP3.
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Added support for RHEL 8.4 and SLES15SP3.
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To update firmware from Linux operating system on target server:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
To update firmware from Linux operating system on target server:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Release Version and/or Date:
1.79
Last Recommended or Critical Version:
1.79
Previous Version of Firmware:
1.78(A)
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Drive may show up missing after a system reboot.
Known Issues:
None
Release Version and/or Date:
1.79
Last Recommended or Critical Version:
1.79
Previous Version of Firmware:
1.78(A)
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Drive may show up missing after a system reboot.
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>~# esxcli software vib install -v=<path><filename.vib> --no-sig-check
~# esxcli software vib remove -n=<filename.vib>
]]>~# esxcli software vib install -v=<path><filename.vib> --no-sig-check
~# esxcli software vib remove -n=<filename.vib>
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPK3
Last Recommended or Critical Version:
HPK2
Previous Version of Firmware:
HPK2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This Firmware release contains various drive interoperability enhancements and code fixes accumulated since the last firmware release, as well as a change to disable MCTP over PCIe VDM function per requested of HPE, and a PHY setting change for improved compatibility with Intel Ice Lake based Gen10+ DL360 platform.
For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00115201en_us
Known Issues:
None
Release Version and/or Date:
HPK3
Last Recommended or Critical Version:
HPK2
Previous Version of Firmware:
HPK2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This Firmware release contains various drive interoperability enhancements and code fixes accumulated since the last firmware release, as well as a change to disable MCTP over PCIe VDM function per requested of HPE, and a PHY setting change for improved compatibility with Intel Ice Lake based Gen10+ DL360 platform.
For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00115201en_us
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
The management interface driver and management agents must be installed on the server.
For iLO 5, openssl v1.0.x or later is required in addition to above packages.
Customers who manually compile and install openssl or intentionally relocate /usr/bin/openssl, need to set PATH environment variable to direct HPONCFG to the right/intended openssl.
The management interface driver and management agents must be installed on the server.
For iLO 5, openssl v1.0.x or later is required in addition to above packages.
Customers who manually compile and install openssl or intentionally relocate /usr/bin/openssl, need to set PATH environment variable to direct HPONCFG to the right/intended openssl.
If a previous version of the Hponcfg utility has been installed, it must be removed before this package can be installed. To remove the previous version of the package, type the following :
To install the package, type:
After installation, the executable for hponcfg utility can be found under the directory /sbin.
]]>If a previous version of the Hponcfg utility has been installed, it must be removed before this package can be installed. To remove the previous version of the package, type the following :
To install the package, type:
After installation, the executable for hponcfg utility can be found under the directory /sbin.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/NewFeatures :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/NewFeatures :
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
Updating firmware without installing the rpm:
Additional Information:
Updating firmware without installing the rpm:
Additional Information:
| NIC | EEPROM/NVM Version | OROM Version | NVM Version |
|---|---|---|---|
| HPE Ethernet 10Gb 2-port SFP+ OCP3 X710-DA2 Adapter | 8000B437 | 1.3082.0 | 8.50 |
| HPE Ethernet 10Gb 2-port SFP+ X710-DA2 Adapter | 8000B735 | 1.3082.0 | 8.50 |
| Intel I350-T4 Ethernet 1Gb 4-port BASE-T Adapter | 80001099 | 1.3082.0 | N/A |
| Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter | 80001097 | 1.3082.0 | N/A |
| Intel(R) I350 Gigabit Network Connection (2-port) | 8000108E | 1.3082.0 | N/A |
| Intel(R) I350 Gigabit Network Connection (4-port) | 8000108F | 1.3082.0 | N/A |
The combo image v1.3082.0 includes: Boot Agent: 1GbE - v1.5.89, Boot Agent I40E - v1.1.31 & UEFI Drivers: 1GbE - v9.7.06, 40 gigabit driver - v4.8.08.
]]>| NIC | EEPROM/NVM Version | OROM Version | NVM Version |
|---|---|---|---|
| HPE Ethernet 10Gb 2-port SFP+ OCP3 X710-DA2 Adapter | 8000B437 | 1.3082.0 | 8.50 |
| HPE Ethernet 10Gb 2-port SFP+ X710-DA2 Adapter | 8000B735 | 1.3082.0 | 8.50 |
| Intel I350-T4 Ethernet 1Gb 4-port BASE-T Adapter | 80001099 | 1.3082.0 | N/A |
| Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter | 80001097 | 1.3082.0 | N/A |
| Intel(R) I350 Gigabit Network Connection (2-port) | 8000108E | 1.3082.0 | N/A |
| Intel(R) I350 Gigabit Network Connection (4-port) | 8000108F | 1.3082.0 | N/A |
The combo image v1.3082.0 includes: Boot Agent: 1GbE - v1.5.89, Boot Agent I40E - v1.1.31 & UEFI Drivers: 1GbE - v9.7.06, 40 gigabit driver - v4.8.08.
]]>Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>If using 4.12.14-120-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.sles12sp5.x86_64.rpm mlnx-ofa_kernel-kmp-default-4.9_k4.12.14_120-OFED.4.9.4.0.8.1.sles12sp5.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
If using 4.12.14-120-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.sles12sp5.x86_64.rpm mlnx-ofa_kernel-kmp-default-4.9_k4.12.14_120-OFED.4.9.4.0.8.1.sles12sp5.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
Note: Per Microsoft kb #2031031(https://support.microsoft.com/en-us/kb/2931031), users cannot remove/unmount a USB until after the install has finished.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
Note: Per Microsoft kb #2031031(https://support.microsoft.com/en-us/kb/2931031), users cannot remove/unmount a USB until after the install has finished.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter | 800095B6 | 1.3082.0 | 3.00 |
he combo image v1.2992.0 includes: Intel(R) Boot Agent ICE v2.5.0 & UEFI x64 100 gigabit driver v3.0.11.
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter | 800095B6 | 1.3082.0 | 3.00 |
he combo image v1.2992.0 includes: Intel(R) Boot Agent ICE v2.5.0 & UEFI x64 100 gigabit driver v3.0.11.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCHT Adapter (P21930-B21) | 14.32.1010 | MT_0000000414 |
| HPE Ethernet 10Gb/25Gb 2-port SFP28 MCX4621A-ACAB OCP3 Adapter (P11341-B21) | 14.32.1010 | MT_0000000238 |
| HPE Ethernet 100Gb 2-port QSFP28 MCX516A-CCHT Adapter (P21927-B21) | 16.32.1010 | MT_0000000417 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCHT Adapter (P21930-B21) | 14.32.1010 | MT_0000000414 |
| HPE Ethernet 10Gb/25Gb 2-port SFP28 MCX4621A-ACAB OCP3 Adapter (P11341-B21) | 14.32.1010 | MT_0000000238 |
| HPE Ethernet 100Gb 2-port QSFP28 MCX516A-CCHT Adapter (P21927-B21) | 16.32.1010 | MT_0000000417 |
To update firmware from VMware ESXi operating system on target server:
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>To update firmware from VMware ESXi operating system on target server:
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Updating firmware with rpm installed:
# ./ CP049064.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-ff3fa73ca1-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
]]>
Updating firmware with rpm installed:
# ./ CP049064.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
# ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-ff3fa73ca1-*' location
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps
]]>
~# esxcli software vib install -v <path><filename.vib>
]]>~# esxcli software vib install -v <path><filename.vib>
]]>HPE 3PAR HostExplorer smart component will be installed only if the host has connectivity to HPE 3PAR StoreServ.
]]>HPE 3PAR HostExplorer smart component will be installed only if the host has connectivity to HPE 3PAR StoreServ.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>To use Smart Update Manager from the Service Pack for ProLiant:
Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPXXXXXX.vmexe
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
amsd only supported on HPE Gen10/Gen10 Plus Servers.
amsd provides information to the iLO 5 service providing SNMP support.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = Red Hat Enterprise Linux 8
amsd only supported on HPE Gen10/Gen10 Plus Servers.
amsd provides information to the iLO 5 service providing SNMP support.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = Red Hat Enterprise Linux 8
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPK1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
HPK1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>If using kernel version 3.10.0-1127.el7.x86_64 or any future errata:
# rpm -Uvh kmod-mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.rhel7u8.x86_64.rpm mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.rhel7u8.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
If using kernel version 3.10.0-1127.el7.x86_64 or any future errata:
# rpm -Uvh kmod-mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.rhel7u8.x86_64.rpm mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.rhel7u8.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The latest Qlogic FC driver 9.4.5.20 is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The latest Qlogic FC driver 9.4.5.20 is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
]]>
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features for :
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features for :
Problems Fixed:
None
Known Issues:
None
]]>
]]>
HPE Gen10 Innovation Engine (IE) Firmware version 0.1.5.2 or later
The "iLO 5 Channel Interface Driver” (CHIF) for Linux which is integrated into the standard Linux kernel.
]]>HPE Gen10 Innovation Engine (IE) Firmware version 0.1.5.2 or later
The "iLO 5 Channel Interface Driver” (CHIF) for Linux which is integrated into the standard Linux kernel.
]]>Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO except for Edgeline blades which are not supported by the Service Pack for ProLiant (SPP) ISO
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO except for Edgeline blades which are not supported by the Service Pack for ProLiant (SPP) ISO
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
None
Known Issues:
None
Problems Fixed:
None
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.01.00.a14_k1_k5.3.18_53-1.sles15sp3.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Rewrite of same Driver version has to be performed using –reinstall option
Example: rpm –Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm –reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.01.00.a14_k1_k5.3.18_53-1.sles15sp3.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Rewrite of same Driver version has to be performed using –reinstall option
Example: rpm –Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm –reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
Be noted that it needs the minimum version(combo image v8.55.12) for this firmware package, please refer to the following link to update firmware first.
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_7761c1b3fae845228e5a11aacf
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_1f7a14b7d04142f0b04ecb9c03
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_45bde9430773406fb2b796799e
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
Be noted that it needs the minimum version(combo image v8.55.12) for this firmware package, please refer to the following link to update firmware first.
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_7761c1b3fae845228e5a11aacf
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_1f7a14b7d04142f0b04ecb9c03
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_45bde9430773406fb2b796799e
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
If local system doesn't configure any network interface for the adapter that are necessary to create the network config file to bring up interface.
- For example in sles15sp1, To create ifcfg-ethX files under /etc/sysconfig/network/.
]]>If local system doesn't configure any network interface for the adapter that are necessary to create the network config file to bring up interface.
- For example in sles15sp1, To create ifcfg-ethX files under /etc/sysconfig/network/.
]]>
Updating firmware without installing the rpm:
Additional Information:
Updating firmware without installing the rpm:
Additional Information:
| NIC | EEPROM/NVM Version | OROM Version | Single NVM Version |
|---|---|---|---|
| HPE Ethernet 1Gb 2-port 361i Adapter | 8000106F | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 2-port 361T Adapter | 80001147 | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 2-port 363i Adapter | 80000D00 | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 4-port 366i Communication Board | 80000EBF | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 4-port 366i Adapter | 8000105E | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 4-port 366FLR Adapter | 80001148 | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 4-port 366T Adapter | 80001146 | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 2-port 368i Adapter | 80003373 | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 2-port 368FLR-MMT Adapter | 80003370 | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 4-port 369i Adapter | 80003371 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter | 800009E0 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 560SFP+ Adapter | 800009E1 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 561T Adapter | 80000636 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 561FLR-T Adapter | 800005B6 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 568i Adapter | 80003372 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 568FLR-MMSFP+ Adapter | 80003370 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 568FLR-MMT Adapter | 80003370 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 563i Adapter | 800035C0 | 1.1375.0 | N/A |
| HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter | 8000B749 | 1.3089.0 | 10.57.2 |
| HPE Ethernet 10Gb 2-port 562FLR-T Adapter | 800016F1 | 1.3089.0 | 10.55.3 |
| HPE Ethernet 10Gb 2-port 562SFP+ Adapter | 8000B748 | 1.3089.0 | 10.57.2 |
| HPE Ethernet 10Gb 2-port 562T Adapter | 800016EF | 1.3089.0 | 10.55.3 |
The combo image v1.3089.0 includes: Boot Agent: 1GbE - v1.5.89, 10GbE - v2.4.45, 40GbE - v1.1.31 & UEFI Drivers: 1GbE - v9.7.06, 10GbE - v8.1.00, 40GbE - v4.8.08
The combo image v1.1375.0 includes: Boot Agent: 1GbE - v1.5.72, 10GbE - v2.3.46, 40GbE - v1.0.21 & UEFI Drivers: 1GbE - v6.9.13, 10GbE - v5.0.20, 40GbE - v1.5.14
Single NVM Version is new firmware format which represent an unified version in place of the previously used EEPROM/NVM Version or OROM version.
]]>| NIC | EEPROM/NVM Version | OROM Version | Single NVM Version |
|---|---|---|---|
| HPE Ethernet 1Gb 2-port 361i Adapter | 8000106F | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 2-port 361T Adapter | 80001147 | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 2-port 363i Adapter | 80000D00 | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 4-port 366i Communication Board | 80000EBF | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 4-port 366i Adapter | 8000105E | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 4-port 366FLR Adapter | 80001148 | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 4-port 366T Adapter | 80001146 | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 2-port 368i Adapter | 80003373 | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 2-port 368FLR-MMT Adapter | 80003370 | 1.3089.0 | N/A |
| HPE Ethernet 1Gb 4-port 369i Adapter | 80003371 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter | 800009E0 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 560SFP+ Adapter | 800009E1 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 561T Adapter | 80000636 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 561FLR-T Adapter | 800005B6 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 568i Adapter | 80003372 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 568FLR-MMSFP+ Adapter | 80003370 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 568FLR-MMT Adapter | 80003370 | 1.3089.0 | N/A |
| HPE Ethernet 10Gb 2-port 563i Adapter | 800035C0 | 1.1375.0 | N/A |
| HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter | 8000B749 | 1.3089.0 | 10.57.2 |
| HPE Ethernet 10Gb 2-port 562FLR-T Adapter | 800016F1 | 1.3089.0 | 10.55.3 |
| HPE Ethernet 10Gb 2-port 562SFP+ Adapter | 8000B748 | 1.3089.0 | 10.57.2 |
| HPE Ethernet 10Gb 2-port 562T Adapter | 800016EF | 1.3089.0 | 10.55.3 |
The combo image v1.3089.0 includes: Boot Agent: 1GbE - v1.5.89, 10GbE - v2.4.45, 40GbE - v1.1.31 & UEFI Drivers: 1GbE - v9.7.06, 10GbE - v8.1.00, 40GbE - v4.8.08
The combo image v1.1375.0 includes: Boot Agent: 1GbE - v1.5.72, 10GbE - v2.3.46, 40GbE - v1.0.21 & UEFI Drivers: 1GbE - v6.9.13, 10GbE - v5.0.20, 40GbE - v1.5.14
Single NVM Version is new firmware format which represent an unified version in place of the previously used EEPROM/NVM Version or OROM version.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPS4
Last Recommended or Critical Version:
HPS2
Previous Version of Firmware:
HPS2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPS4
Last Recommended or Critical Version:
HPS2
Previous Version of Firmware:
HPS2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Note: In order to upgrade CX5 network adapter firmware from 16.21.1xxx or 16.22.1xxx (or earlier) to 16.26.1xxx (or later), use 16.23.1xxx or 16.24.1xxx or 16.25.1xxx as intermediate firmware version.
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Note: In order to upgrade CX5 network adapter firmware from 16.21.1xxx or 16.22.1xxx (or earlier) to 16.26.1xxx (or later), use 16.23.1xxx or 16.24.1xxx or 16.25.1xxx as intermediate firmware version.
]]>| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.28.2006 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.28.2006 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.32.1010 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.32.1010 | HPE0000000022 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.28.2006 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.28.2006 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.32.1010 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.32.1010 | HPE0000000022 |
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-4.6.28-20.sles12sp2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Rewrite of same Driver version has to be performed using –force or --replacepkgs with --nodeps option
Example: rpm –Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm –force --nodeps
rpm –Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm –replacepkgs --nodeps
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-4.6.28-20.sles12sp2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Rewrite of same Driver version has to be performed using –force or --replacepkgs with --nodeps option
Example: rpm –Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm –force --nodeps
rpm –Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm –replacepkgs --nodeps
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]># ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
# ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
This command will extract the contents to "/usr/lib/x86_64-linux-gnu."
The CP050624.scexe script is located in the "scexe-compat'' folder. Further information is available in CP050624.txt file in the "firmware-nic-*" folder. The actual name of the "firmware-nic-*" folder is based on the version of the rpm to be installed.
Updating adapter firmware without installing the rpm:
This will extract the contents of the rpm to the "usr" folder in the current directory.
Additional Information:
]]>
This command will extract the contents to "/usr/lib/x86_64-linux-gnu."
The CP050624.scexe script is located in the "scexe-compat'' folder. Further information is available in CP050624.txt file in the "firmware-nic-*" folder. The actual name of the "firmware-nic-*" folder is based on the version of the rpm to be installed.
Updating adapter firmware without installing the rpm:
This will extract the contents of the rpm to the "usr" folder in the current directory.
Additional Information:
]]>
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | CCM Version | RoCE Version |
|---|---|---|---|---|---|---|
| HPE Ethernet 10Gb 2-port 535FLR-T Adapter | 218.0.229.0 |
218.0.173.0 |
218.0.38.0 |
218.0.93.0 |
218.0.28.0 |
218.0.5.0 |
| HPE Ethernet 10Gb 2-port 535T Adapter | ||||||
| HPE Ethernet 10/25Gb 2-port 631FLR-SFP28 Adapter | ||||||
| HPE Ethernet 10/25Gb 2-port 631SFP28 Adapter | ||||||
| HPE Ethernet 10Gb 2-port 537SFP+ Adapter | ||||||
| HPE Ethernet 10Gb 2-port 537SFP+ FLR Adapter |
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | CCM Version | RoCE Version |
|---|---|---|---|---|---|---|
| HPE Ethernet 10Gb 2-port 535FLR-T Adapter | 218.0.229.0 |
218.0.173.0 |
218.0.38.0 |
218.0.93.0 |
218.0.28.0 |
218.0.5.0 |
| HPE Ethernet 10Gb 2-port 535T Adapter | ||||||
| HPE Ethernet 10/25Gb 2-port 631FLR-SFP28 Adapter | ||||||
| HPE Ethernet 10/25Gb 2-port 631SFP28 Adapter | ||||||
| HPE Ethernet 10Gb 2-port 537SFP+ Adapter | ||||||
| HPE Ethernet 10Gb 2-port 537SFP+ FLR Adapter |
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter | 80008278 | 1.2992.0 | 3.00 |
he combo image v1.2992.0 includes: Intel(R) Boot Agent ICE v2.5.0 & UEFI x64 100 gigabit driver v3.0.11.
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter | 80008278 | 1.2992.0 | 3.00 |
he combo image v1.2992.0 includes: Intel(R) Boot Agent ICE v2.5.0 & UEFI x64 100 gigabit driver v3.0.11.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
]]>
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Note: In order to upgrade CX5 network adapter firmware from 16.21.1xxx or 16.22.1xxx (or earlier) to 16.26.1xxx (or later), use 16.23.1xxx or 16.24.1xxx or 16.25.1xxx as intermediate firmware version.
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Note: In order to upgrade CX5 network adapter firmware from 16.21.1xxx or 16.22.1xxx (or earlier) to 16.26.1xxx (or later), use 16.23.1xxx or 16.24.1xxx or 16.25.1xxx as intermediate firmware version.
]]>| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.28.2006 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.28.2006 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.32.1010 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.32.1010 | HPE0000000022 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.28.2006 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.28.2006 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.32.1010 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.32.1010 | HPE0000000022 |
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>]]>
]]>
To update the driver using VMware tools:
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter (P06154-B21) | 20.32.1010 | HPE0000000034 |
| HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter (P06250-B21) | 20.32.1010 | HPE0000000035 |
| HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter (P06251-B21) | 20.32.1010 | HPE0000000036 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter (P06154-B21) | 20.32.1010 | HPE0000000034 |
| HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter (P06250-B21) | 20.32.1010 | HPE0000000035 |
| HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter (P06251-B21) | 20.32.1010 | HPE0000000036 |
点击“安装”按钮进行安装。]]>
Click the "Install" button to proceed with the installation.]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None.
]]>None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None.
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
If using 5.3.18-53-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.sles15sp3.x86_64.rpm mlnx-ofa_kernel-kmp-default-4.9_k5.3.18_53-OFED.4.9.4.0.8.1.sles15sp3.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
If using 5.3.18-53-default kernel or any future errata:
# rpm -Uvh mlnx-ofa_kernel-4.9-OFED.4.9.4.0.8.1.sles15sp3.x86_64.rpm mlnx-ofa_kernel-kmp-default-4.9_k5.3.18_53-OFED.4.9.4.0.8.1.sles15sp3.x86_64.rpm
Setup is now complete. Reboot your computer for the driver to take effect.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>Click the Install button to proceed with the installation.
]]>| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.32.1010 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.32.1010 | HP_2420110034 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.32.1010 | HPE0000000014 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 546SFP+ Adapter (779793-B21) | 2.42.5044 | HP_1200111023 |
| HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter (779799-B21) | 2.42.5044 | HP_2240110004 |
| HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) | 14.32.1010 | HP_2690110034 |
| HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21) | 14.32.1010 | HP_2420110034 |
| HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21) | 16.32.1010 | HPE0000000014 |
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter | 80008250 | 1.2992.0 | 3.00 |
The combo image v1.2992.0 includes: Intel(R) Boot Agent ICE v2.5.0 & UEFI x64 100 gigabit driver v3.0.11.
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter | 80008250 | 1.2992.0 | 3.00 |
The combo image v1.2992.0 includes: Intel(R) Boot Agent ICE v2.5.0 & UEFI x64 100 gigabit driver v3.0.11.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download cp047666.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for cp047666.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file cp047666.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download cp047666.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for cp047666.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file cp047666.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Release Version and/or Date:
1.56(C)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
1.56(C)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Also nvme-cli package version >=1.12 has to be installed
For NFC agent to work seamlessly, the following ports are required to be enabled on firewall:
NVMe-Rdma Drivers are required to be installed for NFC agent to work seamlessly.
]]>
Also nvme-cli package version >=1.12 has to be installed
For NFC agent to work seamlessly, the following ports are required to be enabled on firewall:
NVMe-Rdma Drivers are required to be installed for NFC agent to work seamlessly.
]]>
]]>
]]>
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 15 service pack 2 and SuSE Linux Enterprise Server 15 service pack 3 has to be performed using --reinstall option
Example: rpm –Uvh HPE-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm --reinstall
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 15 service pack 2 and SuSE Linux Enterprise Server 15 service pack 3 has to be performed using --reinstall option
Example: rpm –Uvh HPE-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm --reinstall
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>http://www.hpe.com/storage/spock/
The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
]]>http://www.hpe.com/storage/spock/
The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Updating firmware without installing rpm:
Updating firmware without installing rpm:
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter (P06154-B21) | 20.32.1010 | HPE0000000034 |
| HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter (P06250-B21) | 20.32.1010 | HPE0000000035 |
| HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter (P06251-B21) | 20.32.1010 | HPE0000000036 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter (P06154-B21) | 20.32.1010 | HPE0000000034 |
| HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter (P06250-B21) | 20.32.1010 | HPE0000000035 |
| HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter (P06251-B21) | 20.32.1010 | HPE0000000036 |
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
Release Version and/or Date:
HPG5
Last Recommended or Critical Version:
HPG4
Previous Version of Firmware:
HPG4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
This code corrects a potential data integrity issue related to unaligned write commands.This issue was only found in supplier ongoing lab testing.
Known Issues:
None
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
]]>
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
]]>This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
]]>http://www.hpe.com/storage/spock/
The HPE supplied Qlogic driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
]]>http://www.hpe.com/storage/spock/
The HPE supplied Qlogic driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
]]>Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
To update the driver using VMware tools:
To update the driver using VMware tools:
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-12.8.509.3_k5.3.18_51-1.sles15sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using –reinstall option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm –reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-12.8.509.3_k5.3.18_51-1.sles15sp3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using –reinstall option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm –reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
]]>Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
]]>Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
Be noted that it needs the minimum version(NVM Image version 216.0.333011) for this firmware package, please refer to the following link to update firmware first.
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_c9c99d62694e4a6aa418b0a781
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_2502ce87e3ba481081daea7a6c
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_0d5f5f72693848838710781e5e
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
Be noted that it needs the minimum version(NVM Image version 216.0.333011) for this firmware package, please refer to the following link to update firmware first.
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_c9c99d62694e4a6aa418b0a781
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_2502ce87e3ba481081daea7a6c
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_0d5f5f72693848838710781e5e
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
Reboot your system for the update to take effect immediately.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Corrects a potential data integrity issue caused by an in process write retry incorrectly starting at the wrong location. This issue was found during supplier ongoing reliability testing.
The firmware also corrects settings preservation after a code download, and includes emergency power off improvements.
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
]]>
]]>
]]>
Integrated Lights-Out 5 (iLO 5) Firmware version 1.40 and System ROM version 1.20 or later are required for HPE Gen10 servers.
]]>Integrated Lights-Out 5 (iLO 5) Firmware version 1.40 and System ROM version 1.20 or later are required for HPE Gen10 servers.
]]>Update the firmware and software in the usual manner.
Update the firmware and software in the usual manner.
To update the driver using VMware tools:
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
The "iLO 5 Channel Interface Driver” (CHIF) for Linux which is integrated into the standard Linux kernel.
]]>The "iLO 5 Channel Interface Driver” (CHIF) for Linux which is integrated into the standard Linux kernel.
]]>Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO.
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Online HDD/SSD Flash Component for VMware ESXi - MB006000GWKGR Drive
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Online HDD/SSD Flash Component for VMware ESXi - MB006000GWKGR Drive
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG8
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
HPK2
Previous Version of Firmware:
HPK2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
HPK2
Previous Version of Firmware:
HPK2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Online NVMe SSD Flash Component for VMware ESXi - LO0400KEFJQ, LO0800KEFJR, LO1600KEFJT, LO2000KEFJU, LT0800KEXVA, LT1600KEXVB, and LT2000KEXVC Drives
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Online NVMe SSD Flash Component for VMware ESXi - LO0400KEFJQ, LO0800KEFJR, LO1600KEFJT, LO2000KEFJU, LT0800KEXVA, LT1600KEXVB, and LT2000KEXVC Drives
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter | 80008280 | 1.2992.0 | 3.00 |
The combo image v1.2992.0 includes: Intel(R) Boot Agent ICE v2.5.0 & UEFI x64 100 gigabit driver v3.0.11.
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter | 80008280 | 1.2992.0 | 3.00 |
The combo image v1.2992.0 includes: Intel(R) Boot Agent ICE v2.5.0 & UEFI x64 100 gigabit driver v3.0.11.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware without installing rpm:
Note: In order to upgrade CX5 network adapter firmware from 16.21.1xxx or 16.22.1xxx (or earlier) to 16.26.1xxx (or later), use 16.23.1xxx or 16.24.1xxx or 16.25.1xxx as intermediate firmware version.
]]>Updating firmware without installing rpm:
Note: In order to upgrade CX5 network adapter firmware from 16.21.1xxx or 16.22.1xxx (or earlier) to 16.26.1xxx (or later), use 16.23.1xxx or 16.24.1xxx or 16.25.1xxx as intermediate firmware version.
]]>| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.28.2006 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.28.2006 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.32.1010 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.32.1010 | HPE0000000022 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.28.2006 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.28.2006 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.32.1010 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.32.1010 | HPE0000000022 |
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
]]>
]]>
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 12 service pack 5 has to be performed using –force or --replacepkgs with --nodeps option
Example: rpm –Uvh HPE-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm --force --nodeps
rpm –Uvh HPE-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm --replacepkgs --nodeps
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 12 service pack 5 has to be performed using –force or --replacepkgs with --nodeps option
Example: rpm –Uvh HPE-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm --force --nodeps
rpm –Uvh HPE-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm --replacepkgs --nodeps
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Note: In order to upgrade CX5 network adapter firmware from 16.21.1xxx or 16.22.1xxx (or earlier) to 16.26.1xxx (or later), use 16.23.1xxx or 16.24.1xxx or 16.25.1xxx as intermediate firmware version.
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
To update firmware from VMware ESXi operating system on target server:
Note: In order to upgrade CX5 network adapter firmware from 16.21.1xxx or 16.22.1xxx (or earlier) to 16.26.1xxx (or later), use 16.23.1xxx or 16.24.1xxx or 16.25.1xxx as intermediate firmware version.
]]>| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.28.2006 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.28.2006 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.32.1010 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.32.1010 | HPE0000000022 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21) | 12.28.2006 | HP_2180110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21) | 12.28.2006 | HP_2190110032 |
| HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21) | 16.32.1010 | HPE0000000009 |
| HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21) | 16.32.1010 | HPE0000000022 |
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
This is a self extracting executable module. One can execute this module via the command line console or from Windows graphical user interface.
GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Online:
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>This is a self extracting executable module. One can execute this module via the command line console or from Windows graphical user interface.
GUI Option:
CLI Option:
Execute the Smart Component by entering the following command: CP0xxxxx.exe /s
To use Smart Update Manager (SUM) from the Service Pack for ProLiant (SPP):
Online:
NOTES: OPTIONS for in band enclosure flash:
Parameter Description
-----------------------------------------------------------------------------
/h,/? Displays command line usage help(dialog box)
/s Installs without user interaction
The following command is applicable only with /s:
/f Allow a downgrade or reinstall if already up to date
Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Problems Fixed:
None
Known Issues:
None
Problems Fixed:
None
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPK4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Release Version and/or Date:
NA
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
NA
Last Recommended or Critical Version:
NA
Previous Version of Firmware:
NA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Problems Fixed:
None
Known Issues:
None
Problems Fixed:
None
Known Issues:
None
A REBOOT is required for your computer when the setup is complete.
]]>A REBOOT is required for your computer when the setup is complete.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
If local system doesn't configure any network interface for the adapter that are necessary to create the network config file to bring up interface.
- For example in sles15sp1, To create ifcfg-ethX files under /etc/sysconfig/network/.
If local system doesn't configure any network interface for the adapter that are necessary to create the network config file to bring up interface.
- For example in sles15sp1, To create ifcfg-ethX files under /etc/sysconfig/network/.
Additional Information:
Additional Information:
| NIC | Boot Code Version | PXE Version | UEFI Version | iSCSI Version | FCoE Version | CCM Version | L2 Version |
| HP Ethernet 10Gb 2-port 530SFP+ Adapter HP Ethernet 10Gb 2-port 530T Adapter |
7.16.05 | 7.14.13 | 8.9.2 | n/a | n/a | 7.14.4 | 7.12.25 |
|
HP Ethernet 10Gb 2-port 533FLR-T Adapter |
7.16.05 | 7.14.13 | 8.9.2 | 7.14.0 | 7.14.3 | 7.14.4 | 7.12.25 |
]]>
| NIC | Boot Code Version | PXE Version | UEFI Version | iSCSI Version | FCoE Version | CCM Version | L2 Version |
| HP Ethernet 10Gb 2-port 530SFP+ Adapter HP Ethernet 10Gb 2-port 530T Adapter |
7.16.05 | 7.14.13 | 8.9.2 | n/a | n/a | 7.14.4 | 7.12.25 |
|
HP Ethernet 10Gb 2-port 533FLR-T Adapter |
7.16.05 | 7.14.13 | 8.9.2 | 7.14.0 | 7.14.3 | 7.14.4 | 7.12.25 |
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
Linux FC Driver Kit for HPE Emulex FC HBAs and mezz cards, version 12.8.xxx.x for RedHat 7, RedHat 8 and SUSE 12, SUSE 15.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
Linux FC Driver Kit for HPE Emulex FC HBAs and mezz cards, version 12.8.xxx.x for RedHat 7, RedHat 8 and SUSE 12, SUSE 15.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
To uninstall the Emulex Smart SAN enablement RPM use the following command:
# rpm -e hpe-emulex-smartsan-enablement-<version>.noarch.rpm
This is a configurable component. It requires a configuration file in order to enable/disable Smart SAN functionality. If no configuration is performed, the current Smart SAN status is stated and the execution is complete. No further action is taken.
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
1. Login as the system administrator (root).
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install, type the following command at the prompt:
# rpm -ivh hpe-emulex-smartsan-enablement-kit-<version>.x86_64.rpm
Example: # rpm -ivh hpe-emulex-smartsan-enablement-kit-1.0.0.0-1.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Installation complete
]]>
To uninstall the Emulex Smart SAN enablement RPM use the following command:
# rpm -e hpe-emulex-smartsan-enablement-<version>.noarch.rpm
This is a configurable component. It requires a configuration file in order to enable/disable Smart SAN functionality. If no configuration is performed, the current Smart SAN status is stated and the execution is complete. No further action is taken.
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
1. Login as the system administrator (root).
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install, type the following command at the prompt:
# rpm -ivh hpe-emulex-smartsan-enablement-kit-<version>.x86_64.rpm
Example: # rpm -ivh hpe-emulex-smartsan-enablement-kit-1.0.0.0-1.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Installation complete
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the Install button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the Install button to proceed with the installation.
]]>| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter (P06154-B21) | 20.32.1010 | HPE0000000034 |
| HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter (P06250-B21) | 20.32.1010 | HPE0000000035 |
| HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter (P06251-B21) | 20.32.1010 | HPE0000000036 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter (P06154-B21) | 20.32.1010 | HPE0000000034 |
| HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter (P06250-B21) | 20.32.1010 | HPE0000000035 |
| HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter (P06251-B21) | 20.32.1010 | HPE0000000036 |
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5056 | HP_1360110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5056 | HP_1370110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5700 | HP_1380110017 |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+M Adapter (764282-B21) | 2.42.5000 | HP_1350110023 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+M Adapter (764283-B21) | 2.42.5056 | HP_1360110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter (764284-B21) | 2.42.5056 | HP_1370110017 |
| HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter (764285-B21) | 2.42.5700 | HP_1380110017 |
| HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter (764286-B21) | 2.42.5000 | HP_1390110023 |
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
http://www.hpe.com/storage/spock/
The HPE supplied Emulex NIC driver must be installed prior to this firmware component being identified by SUM for deployment. The latest driver is available on the HPE.com website at http://www.hpe.com/.
The FCoE/iSCSI OOB driver and FCoE enablement kit are available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
]]>http://www.hpe.com/storage/spock/
The HPE supplied Emulex NIC driver must be installed prior to this firmware component being identified by SUM for deployment. The latest driver is available on the HPE.com website at http://www.hpe.com/.
The FCoE/iSCSI OOB driver and FCoE enablement kit are available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
]]>The downloaded file is a self-extracting executable with a filename based on the Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
The downloaded file is a self-extracting executable with a filename based on the Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Additional Information:
Updating firmware with rpm installed:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Additional Information:
Release Version and/or Date:
1.00(B)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
1.00(B)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware without installing rpm:
Updating firmware without installing rpm:
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 548SFP+ Adapter (P11338-B21) | 14.32.1010 | HPE0000000038 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 548SFP+ Adapter (P11338-B21) | 14.32.1010 | HPE0000000038 |
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe (or) chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
Download README for any additional installation instructions.
]]>amsd only supported on HPE Gen10/Gen10 Plus Servers.
amsd provides information to the iLO 5 service providing SNMP support.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = SUSE Linux Enterprise Server 15
amsd only supported on HPE Gen10/Gen10 Plus Servers.
amsd provides information to the iLO 5 service providing SNMP support.
Requirements:
Minimum iLO 5 Firmware Version = 1.1
Minimum supported OS Versions = SUSE Linux Enterprise Server 15
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be logged in as root user in order to apply the update)
Place the Smart Component in a temporary directory (Example /tmp/)
Check if nmst module is loaded already using the command: vmkload_mod -l | grep nmst
If the module is not loaded, use this command to load the module: vmkload_mod nmst
Unzip the component.
# unzip CPXXXXXX.zip
From the same directory, update the firmware using legacy Smart Component by executing vmexe file:
# ./CPXXXXXX.vmexe
OR
Follow below steps to update the firmware using signed VIB:
# esxcli software component apply -d /tmp/CPXXXXXX_VMw.zip
Note : add --no-sig-check to signature checking needs to be skipped.
# cd /opt/Smart_Component/CP0XXXXX/
# Update the firmware by running the command "./Execute_Component -s -f"
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
]]>
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be logged in as root user in order to apply the update)
Place the Smart Component in a temporary directory (Example /tmp/)
Check if nmst module is loaded already using the command: vmkload_mod -l | grep nmst
If the module is not loaded, use this command to load the module: vmkload_mod nmst
Unzip the component.
# unzip CPXXXXXX.zip
From the same directory, update the firmware using legacy Smart Component by executing vmexe file:
# ./CPXXXXXX.vmexe
OR
Follow below steps to update the firmware using signed VIB:
# esxcli software component apply -d /tmp/CPXXXXXX_VMw.zip
Note : add --no-sig-check to signature checking needs to be skipped.
# cd /opt/Smart_Component/CP0XXXXX/
# Update the firmware by running the command "./Execute_Component -s -f"
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
]]>| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 548SFP+ Adapter (P11338-B21) | 14.32.1010 | HPE0000000038 |
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10Gb 2-port 548SFP+ Adapter (P11338-B21) | 14.32.1010 | HPE0000000038 |
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
Remote Online, if the component is supported by SUM but is not yet part of an SPP:
Download the appropriate SPP
Add the component to the SPP
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
Run SUM
Add the ESXi host to be updated as a remote target/node
Enter IP or DNS address of the ESXi host to be updated
Enter the ESXi host credentials (root or administrator username and password)
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps to complete the firmware update
Refer to the SPP documentation for detailed instructions at: https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx
Note: While updating firmware using SUM, "View Devices" option on the review page does not list the exact name of the adapter. This is an expected behavior and does not affect the functionality of the component.
To use HPE Insight Control for vCenter:
Log in to the vSphere Client
Select a server or cluster in the inventory tree
Click the HPE Insight Management tab
Follow Insight Control for vCenter steps to update firmware using a Smart Component
To update firmware from VMware ESXi operating system on target server:
Enable SSH on the ESXi host.
Login as root. (You must be root in order to apply the update)
Place the Smart Component in a temporary directory
Check if the nmst module is loaded already: vmkload_mod -l | grep nmst
If module is not loaded, use the command to load the module: vmkload_mod nmst
From the same directory, execute the Smart Component. For example: unzip CPXXXXXX.zip; ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout.
Disable SSH on the ESXi host.
Reboot your system, if required, for the firmware update to take effect.
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter (P06154-B21) | 20.32.1010 | HPE0000000034 |
| HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter (P06250-B21) | 20.32.1010 | HPE0000000035 |
| HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter (P06251-B21) | 20.32.1010 | HPE0000000036 |
| InfiniBand Card Type | Firmware Version | PSID |
| HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter (P06154-B21) | 20.32.1010 | HPE0000000034 |
| HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter (P06250-B21) | 20.32.1010 | HPE0000000035 |
| HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter (P06251-B21) | 20.32.1010 | HPE0000000036 |
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
]]>From that drive and directory, execute the downloaded file.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None
Release Version and/or Date:
HPD9
Last Recommended or Critical Version:
HPD8
Previous Version of Firmware:
HPD8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None.
Known Issues:
None
HPE Gen10 Innovation Engine (IE) Firmware version 0.1.5.2 or later
The "iLO 5 Channel Interface Driver” (CHIF) for Windows which is available from Service Pack for ProLiant (SPP).
]]>HPE Gen10 Innovation Engine (IE) Firmware version 0.1.5.2 or later
The "iLO 5 Channel Interface Driver” (CHIF) for Windows which is available from Service Pack for ProLiant (SPP).
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO except for Edgeline blades which are not supported by the Service Pack for ProLiant (SPP) ISO
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using the Service Pack for ProLiant (SPP) ISO except for Edgeline blades which are not supported by the Service Pack for ProLiant (SPP) ISO
Option1:
Option 2:
Note that this mechanism can be scripted through iLO for performing updates to multiple servers.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download cp047662.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for cp047662.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file cp047662.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download cp047662.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for cp047662.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file cp047662.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD7
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
http://www.hpe.com/storage/spock/
The target environment must have the libHBAAPI Package installed prior to the installation of the firmware as the discovery of adapters might not complete without the library. (If not already present, the libHBAAPI Package can be obtained from the operating system installation media.)
Additional requirements:
Environment must be running the syslog daemon for the flash engine to run
Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex Host Bus Adapters(HBAs)
http://www.hpe.com/storage/spock/
The target environment must have the libHBAAPI Package installed prior to the installation of the firmware as the discovery of adapters might not complete without the library. (If not already present, the libHBAAPI Package can be obtained from the operating system installation media.)
Additional requirements:
Environment must be running the syslog daemon for the flash engine to run
Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex Host Bus Adapters(HBAs)
To update the driver using VMware tools:
To update the driver using VMware tools:
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
To use Smart Update Manager from the Service Pack for ProLiant
]]>
To use Smart Update Manager from the Service Pack for ProLiant
]]>
Release Version and/or Date:
1.56(C)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
1.56(C)
Last Recommended or Critical Version:
1.00
Previous Version of Firmware:
1.00
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant :
To use Smart Update Manager from the Service Pack for ProLiant :
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe (or) chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0
Commands required to execute VIB file on ESXi 6. 7 and prior versions.
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
]]>
NOTE: Updated utilities and system libraries are required to support the iLO
HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility
does not currently support the CNSA security state.
Upgrading from a previous version of iLO
NOTE: Updated utilities and system libraries are required to support the iLO
HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility
does not currently support the CNSA security state.
Upgrading from a previous version of iLO
Extract the rpm file using the command ‘rpm2cpio <filename> | cpio –idmv’
Navigate to /usr/lib/x86_64-linux-gnu/firmware-ilo5-ri11-1.40-1.1
Run the ‘hpsetup’ file using the command ./hpsetup or ./hpsetup –f when updating to same version
To install the Linux Smart Components perform the below steps
Extract the RPM file and navigate to /usr/lib/x86_64-linux-gnu.
To use the Set up file, navigate to firmware-ilo5-2.xx-1.1 folder and run the same.
To use .scexe files, navigate to hp-scexe-compat or scexe-compat folders and run the same.
Extract the rpm file using the command ‘rpm2cpio <filename> | cpio –idmv’
Navigate to /usr/lib/x86_64-linux-gnu/firmware-ilo5-ri11-1.40-1.1
Run the ‘hpsetup’ file using the command ./hpsetup or ./hpsetup –f when updating to same version
To install the Linux Smart Components perform the below steps
Extract the RPM file and navigate to /usr/lib/x86_64-linux-gnu.
To use the Set up file, navigate to firmware-ilo5-2.xx-1.1 folder and run the same.
To use .scexe files, navigate to hp-scexe-compat or scexe-compat folders and run the same.
iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None