• Enhanced iLO firmware to report additional description about the component for HPE GreenLake Compute Ops Management (COM) initiated firmware bundle update
  • Added Enable/Disable of User Accounts option from Redfish and iLO GUI
  • For PLDM components, added the ability to selectively update the target devices on the system from Install sets and Update task queue
    • ]]>
  • Fixed CloudConnect retry logic to reconnect to iLO once connectivity is resumed
  • Fixed the auto-connect issue if the HPE GreenLake Compute Ops Management (COM) was disabled due to a no-retry
    • ]]>
  • iLO needs to provide IPv4 address for RDE enabled NIC
  • NVIDIA L40S needs to be enabled on HPE Servers (Gen11, Gen10 Plus)
  • High Efficiency Mode setting can be modified via iLO for DL110 Gen10 Plus server having only DC Power Supply of Spare Part Number P40359-001
    • ]]>
  • Increased the maximum boot order to 512 as specified by UEFI EV specification
  • UefiDevicePath length increased from 256 bytes to 1024 bytes. 
  • Incorrect sensor values for some sub-components in IPMI response.
  • Enforced a limit of 14 bytes for DHCP v4 clientId. An error response of "400 - Bad Request" will be observed if the length is beyond 14 characters.
     
    • ]]>         Fixed the following items: 

    • TBD
    ]]>         The following enhancements are available in this release:

      •  
    • Extend cpqSePciSlotEntry, cpqSePciFunctEntry, cpaSePCleDiskEntry OIDs index for supporting PCI multi-segment function.
    • Support NIC redundancy bonding function
    ]]>         Fixed the following items: 

    •  cpqSePCIeDiskOsName is now correctly displayed
    • Removed trailing spaces in the value of cpqSePCIeDiskModel, cpqNicIfPhysAdapterPartNumber, cpqSePciSlotBoardName, cpqSePCIeDiskFwRe
    ]]>
  • Enhanced iLO firmware to report additional description about the component for HPE GreenLake Compute Ops Management (COM) initiated firmware bundle update
  • Added Enable/Disable of User Accounts option from Redfish and iLO GUI
  • For PLDM components, added the ability to selectively update the target devices on the system from Install sets and Update task queue
    • ]]>
  • Fixed CloudConnect retry logic to reconnect to iLO once connectivity is resumed
  • Fixed the auto-connect issue if the HPE GreenLake Compute Ops Management (COM) was disabled due to a no-retry
    • ]]>
  • iLO needs to provide IPv4 address for RDE enabled NIC
  • NVIDIA L40S needs to be enabled on HPE Servers (Gen11, Gen10 Plus)
  • High Efficiency Mode setting can be modified via iLO for DL110 Gen10 Plus server having only DC Power Supply of Spare Part Number P40359-001
    • ]]>
  • Increased the maximum boot order to 512 as specified by UEFI EV specification
  • UefiDevicePath length increased from 256 bytes to 1024 bytes. 
  • Incorrect sensor values for some sub-components in IPMI response.
  • Enforced a limit of 14 bytes for DHCP v4 clientId. An error response of "400 - Bad Request" will be observed if the length is beyond 14 characters.
     
    • ]]>         Changes and New Features in version 3.19.70.2001:

    • Added support for host seeding for ESXi 7.0.
    ]]>         No fixes are included in version 3.19.70.2001:

    ]]>         The following changes have been made in sub-version 2020.11.11(B):

    • Product rebuilt to have the new SHA 384 signature.

    Changes and New Features in version 3.19.70.1:

    • Resolved an issue that caused the network adapter traffic to stop.
    • Fixed an internal multicast loopback issue that broke LACP(Link Aggregation Control Protocol) bonding protocol.
    ]]>         No fixes are included in version 3.19.70.1:

    ]]>         Fix issue with component unable to be displayed on offline SPP

    ]]>         Support RHEL8

    ]]>         For Gen11 PR4 and  2023 Sep MSB

    ]]>         Support ML110 and DL560 Gen11 servers

    ]]>         Fixed the following items: 

    • TBD
    ]]>         The following enhancements are available in this release:

      •  
    • Extend cpqSePciSlotEntry, cpqSePciFunctEntry, cpaSePCleDiskEntry OIDs index for supporting PCI multi-segment function.
    • Support NIC redundancy bonding function
    • Support cpqNic information on SLES XEN Virtual interfaces
    ]]>         Fixed the following items: 

    •  cpqSePCIeDiskOsName is now correctly displayed
    • Removed trailing spaces in the value of cpqSePCIeDiskModel, cpqNicIfPhysAdapterPartNumber, cpqSePciSlotBoardName, cpqSePCIeDiskFwRe
    ]]>         For Gen11 PR4 and 2023 Sep MSB

    ]]>         Support ML110 and DL560 Gen11 servers

    ]]>         Fixed the following items: 

    •  cpqSePCIeDiskOsName is now correctly displayed
    • Removed trailing spaces in the value of cpqSePCIeDiskModel, cpqNicIfPhysAdapterPartNumber, cpqSePciSlotBoardName, cpqSePCIeDiskFwRe
    ]]>         The following enhancements are available in this release:

      •  
    • Extend cpqSePciSlotEntry, cpqSePciFunctEntry, cpaSePCleDiskEntry OIDs index for supporting PCI multi-segment function.
    • Support NIC redundancy bonding function
    • Support cpqNic information on SLES XEN Virtual interfaces
    ]]>         Fixed the following items: 

    •  cpqSePCIeDiskOsName is now correctly displayed
    • Removed trailing spaces in the value of cpqSePCIeDiskModel, cpqNicIfPhysAdapterPartNumber, cpqSePciSlotBoardName, cpqSePCIeDiskFwRe
    ]]>         NMST version 4.25.0.703

     

    This version is supported on VMware ESXi 7.0 Update 3 only.

    ]]>         The following changes have been made in version 2023.08.01:

    • Added support to ESXi 8.0.

     

     

    ]]>
  • Enhanced iLO firmware to report additional description about the component for HPE GreenLake Compute Ops Management (COM) initiated firmware bundle update
  • Added Enable/Disable of User Accounts option from Redfish and iLO GUI
  • For PLDM components, added the ability to selectively update the target devices on the system from Install sets and Update task queue
    • ]]>
  • Fixed CloudConnect retry logic to reconnect to iLO once connectivity is resumed
  • Fixed the auto-connect issue if the HPE GreenLake Compute Ops Management (COM) was disabled due to a no-retry
    • ]]>
  • iLO needs to provide IPv4 address for RDE enabled NIC
  • NVIDIA L40S needs to be enabled on HPE Servers (Gen11, Gen10 Plus)
  • High Efficiency Mode setting can be modified via iLO for DL110 Gen10 Plus server having only DC Power Supply of Spare Part Number P40359-001
    • ]]>
  • Increased the maximum boot order to 512 as specified by UEFI EV specification
  • UefiDevicePath length increased from 256 bytes to 1024 bytes. 
  • Incorrect sensor values for some sub-components in IPMI response.
  • Enforced a limit of 14 bytes for DHCP v4 clientId. An error response of "400 - Bad Request" will be observed if the length is beyond 14 characters.
     
    • ]]>
  • Update the component version to resolve host incompatibility with vLCM Image after updating with predefined baseline.
  • Fix OS upgrade failure due to unreplaced Gen9 AMS CLI component.
    • ]]>         Fixed the following items: 

    • TBD
    ]]>         The following enhancements are available in this release:

      •  
    • Extend cpqSePciSlotEntry, cpqSePciFunctEntry, cpaSePCleDiskEntry OIDs index for supporting PCI multi-segment function.
    • Support NIC redundancy bonding function
    ]]>         Fixed the following items: 

    •  cpqSePCIeDiskOsName is now correctly displayed
    • Removed trailing spaces in the value of cpqSePCIeDiskModel, cpqNicIfPhysAdapterPartNumber, cpqSePciSlotBoardName, cpqSePCIeDiskFwRe
    ]]>         Fix issue for component unable to be displayed on offline SPP

    ]]>
  • Update build environment with SHA384
  • Update OS
    • ]]>         Enable Redfish Write for Drive.SecureErase and Storage.ResetToDefault. Users are able to reset the controller through PLDM. 

    ]]>         Enable Redfish Write for Drive.SecureErase and Storage.ResetToDefault. Users are able to reset the controller through PLDM. 

    ]]>
  • Update the component version to resolve host incompatibility with vLCM Image after updating with predefined baseline.
  • Fix OS upgrade failure due to unreplaced Gen9 AMS CLI component.
    • ]]>