Firmware for the following devices has been updated to 14.32.1900:

  • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
  • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

 

Firmware for the following device has been updated to 16.35.4030:

  • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

Security Hardening Enhancements
This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
 

No new features or changes have been included in firmware version 14.32.1900.

 

New features and changes included in firmware version 16.35.4030:

  • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
]]> No fixes have been included in firmware version 14.32.1900.
 

The following issues have been fixed in firmware version 16.35.4030:

  • VF FLR would get stuck when its PF triggered the FLR as well.
  • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
]]> Firmware for the following devices has been updated to 14.32.1010:

  • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
  • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

 

Firmware for the following device has been updated to 16.35.3502:

  • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

 

New features and changes included in firmware version 14.32.1010:

  • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
  • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
  • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
  • Limited the external loopback speed to the used module's capabilities.
  • Improved linkup time when using the fast linkup capability.
  • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.
     

New features and changes included in firmware version 16.35.3502:

  • Modified the TCP IPv4 flows so that the steering TIR rx_hash_symmetric field is now valid only when both the SRC and DST fields are not set to zero.
]]> The following issues have been fixed in firmware version 14.32.1010:

  • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
  • The system could not create more than 128K QPs.
  • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
  • Packet Pacing rate was used if asymmetric VFs was enabled.
  • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
  • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
  • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
     

No fixes are included in firmware version 16.35.3502.

]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.4030:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

    No new Features and changes included in version 12.28.2302.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No new fixes have been added in version 12.28.2302.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 12.28.2006:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.3006:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

    New Features and changes included in version 12.28.2006:

    • Increased the maximum XRQ number to 512.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in firmware version 12.28.2006:

    • Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
    • Increased PHY power consumption limit to 1.5w.
    • Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Support non-hotplug backplane configuration which is used in HPE ProLiant MicroServer Gen11
    • All the Redfish Drive resources will be listed directly under storage with "%L<StorageId>/Drives/{DriveId}¨
    • Box field will not be displayed anywhere as there is no Box in this case
  • LTO support
    • Please check Tape Compatibility matrix on SPoCK (www.hpe.com/storage/TapeCompatibilityMatrix)
    • On Linux, using IO sizes larger than 256KB may result in an error
    • Redfish support is not available for Tape drives
    • The Tape drive appears as a 0KB drive in MRSA and storcli
    • Note: LTO does not support OBSE. OBSE will show fail result on the server with LTO installed.
  • Change SBR (secondary bus reset) handle method. With this change, the boot up time is shorten for the vm which has passthrough MR controller configured
  • Firmware logging (snapdump) improvement
    • Include protocol layer logs from initial discovery at start of day to address Drive lost across reboots
    • Additional snapdumps are generated if drive failure conditions are detected
    • Use storcli /cx set captureSodPlLogs=<on|off> to enable/disable the function
    • ]]>
  • Fix a00138425en_us: HPE MR Gen10 Plus/Gen11 Controllers - The Health Status Is Erroneously Displayed As "OK" In The Server Health Tab After a Drive or Storage Volume is in a Failed State.
  • Fix an issue that PLDM firmware update for controller and downstream device may failed due to checksum error.
  • Fix an issue that ControllerPreviousError (0x7f833119) event may be logged in IML when there is large capacity NVMe drive installed and graceful shutdown.
  • Fix an issue that controller may crash during firmware self-activation and cause iLO to show firmware update fail.
  • Fix a rare issue that ControllerPreviousError (0x7f833119) event may be logged in IML when server reboot and there is firmware log migration.
  • Fix a rare issue that imported secured drives in a span (parity group) became unsecured and data is not recovered. The issue happens only when all drives in a span are removed, re-insert and do import operation.
  • Fix an issue that controller reset may occur and not be recovered when adding drives to do transformation and get logical drive information from storcli, MRSA or Redfish client simultaneously.
  • Fix a rare issue that data mis compare may happen when simultaneously write and read data for many times before the written data is flushed to physical drive.
  • Fix a rare issue that drive might be marked as Unconfigured Bad when hot-insert.
  • Fix a rare issue that controller may assert and ControllerPreviousError (0x7f833119) event is logged in IML when there is IO running and reset happens on JBOD drive.
  • Fix a rare issue that drive may be marked as Unconfigured Bad if there is link reset happens.
  • Fix an issue that Read(32) or Write(32) CDB sent to NVMe drive reported incorrect additional sense code.
  • Fix a rare issue that controller may stop responding when there is IO running and plugout drives to make volume offline.
  • Fix an issue that drive removal events are delayed when NVMe drive hot-insert and hotremove are performed when mixing SAS/SATA and NVMe drives.
  • Fix a rare issue that controller may assert if UBM backplane firmware update failed.
  • Fix an assertion failure that may happens when running IO and task management. In this case, IO's marked for abort are getting completed before the firmware really get a chance to abort them.
  • Fix an issue that Redfish client is allowed to create different RAID level on the existing span (parity group) configuration which is unsupported.
  • Fix an issue that logical drive creation with "0" capacity creating full drive capacity in Redfish client. It is not allowed to use CapacityBytes less than 1GB.
    • ]]>
  • Support non-hotplug backplane configuration which is used in HPE ProLiant MicroServer Gen11
    • All the Redfish Drive resources will be listed directly under storage with "%L<StorageId>/Drives/{DriveId}¨
    • Box field will not be displayed anywhere as there is no Box in this case
  • LTO support
    • Please check Tape Compatibility matrix on SPoCK (www.hpe.com/storage/TapeCompatibilityMatrix)
    • On Linux, using IO sizes larger than 256KB may result in an error
    • Redfish support is not available for Tape drives
    • The Tape drive appears as a 0KB drive in MRSA and storcli
    • Note: LTO does not support OBSE. OBSE will show fail result on the server with LTO installed.
  • Change SBR (secondary bus reset) handle method. With this change, the boot up time is shorten for the vm which has passthrough MR controller configured
  • Firmware logging (snapdump) improvement
    • Include protocol layer logs from initial discovery at start of day to address Drive lost across reboots
    • Additional snapdumps are generated if drive failure conditions are detected
    • Use storcli /cx set captureSodPlLogs=<on|off> to enable/disable the function
    • ]]>
  • Fix a00138425en_us: HPE MR Gen10 Plus/Gen11 Controllers - The Health Status Is Erroneously Displayed As "OK" In The Server Health Tab After a Drive or Storage Volume is in a Failed State.
  • Fix an issue that PLDM firmware update for controller and downstream device may failed due to checksum error.
  • Fix an issue that ControllerPreviousError (0x7f833119) event may be logged in IML when there is large capacity NVMe drive installed and graceful shutdown.
  • Fix an issue that controller may crash during firmware self-activation and cause iLO to show firmware update fail.
  • Fix a rare issue that ControllerPreviousError (0x7f833119) event may be logged in IML when server reboot and there is firmware log migration.
  • Fix a rare issue that imported secured drives in a span (parity group) became unsecured and data is not recovered. The issue happens only when all drives in a span are removed, re-insert and do import operation.
  • Fix an issue that controller reset may occur and not be recovered when adding drives to do transformation and get logical drive information from storcli, MRSA or Redfish client simultaneously.
  • Fix a rare issue that data mis compare may happen when simultaneously write and read data for many times before the written data is flushed to physical drive.
  • Fix a rare issue that drive might be marked as Unconfigured Bad when hot-insert.
  • Fix a rare issue that drive may be marked as Unconfigured Bad if there is link reset happens.
  • Fix an issue that Read(32) or Write(32) CDB sent to NVMe drive reported incorrect additional sense code.
  • Fix a rare issue that controller may stop responding when there is IO running and plugout drives to make volume offline.
  • Fix an issue that drive removal events are delayed when NVMe drive hot-insert and hotremove are performed when mixing SAS/SATA and NVMe drives.
  • Fix a rare issue that controller may assert if UBM backplane firmware update failed.
  • Fix an assertion failure that may happens when running IO and task management. In this case, IO's marked for abort are getting completed before the firmware really get a chance to abort them.
  • Fix an issue that Redfish client is allowed to create different RAID level on the existing span (parity group) configuration which is unsupported.
  • Fix an issue that logical drive creation with "0" capacity creating full drive capacity in Redfish client. It is not allowed to use CapacityBytes less than 1GB.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Firmware for the following device has been updated to 14.32.1900:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

    ]]>         No fixes have been included in firmware version 14.32.1900.

    ]]>         Firmware for the following device has been updated to 14.32.1010:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    New features and changes included in version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.
    ]]>         The following changes have been made in sub-version 1.0.0.6(A):

    • Product rebuilt to have the new SHA 384 signature.

    The following issues have been fixed in version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
    ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail WS2025 HSTI test.

    Addressed an issue where the PCIe link speed of Microchip AROC Gen10 SR controller (AROC controller) may downgrade.

    Known Issues:

    None]]>         Updated some Japanese translation

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of the MR controller.

    Addressed an issue where Redfish BIOS actions, ResetBIOS and ChangePassword may not work.

    Addressed an issue where Battery Failure IML message log may be incorrectly logged for the Smart Array controller with Smart Storage Battery.

    Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

    Known Issues:

    None]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us
    • ]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
    • ]]>         Updated to driver version 14.4.313.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019



     

     

    ]]>         Updated to driver version 14.2.537.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019

    ]]>         This version is in compliance with IPU.2024.1 guidance.

    ]]>         Important Notes:

    Ver. 04.04.04.603(B) contains updates to the firmware packaging and is functionally equivalent to ver. 04.04.04.603. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 04.04.04.603.

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/22/2024) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2023-35191. This issue is not unique to HPE servers.

    Known Issues:

    None

    ]]>         This version is in compliance with IPU.2024.1 guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/22/2024) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2023-35191. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Added Supported Environments
  • Added Supported Platforms
    • ]]>         Updated to version 1.0.0.1

    ]]>         Updated to version 1.0.0.1

    ]]>
  • Added support for saving Managed SED master key and reset key in cipher text in controller NVRAM instead of clear text.
  • Changed temperature polling period from 1 minute to 5 minutes for HBA mode drives that are in low power state.
  • Added support for clearing UREs in unmapped LBA range of fault tolerant logical drives.
  • Improved random write and mixed read-write performance.
  • Added support for SED encryption configuration through Redfish interface.
  • Added support of Redfish Chassis implementation for UBM Backplanes.
  • Added Redfish ACTION:
    • Storage.SetEncryptionKey
  • Added support for Redfish property PATCH:
    • Storage.EncryptionMode
    • Storage.HotspareActivationPolicy
    • Drive.HostspareReplacementMode
    • Drive.HotspareType
    • Volume.Encrypted
  • Added support for Redfish Status.Conditions property to resources:
    • Drive
    • Port
    • StorageController
    • StorageController.CacheSummary
    • Volume
  • Added support for Redfish properties:
    • Drive.DriveFormFactor
    • Drive.FirmwareVersion
    • Drive.Manufacture (SAS only)
    • Drive.SlotCapableProtocols
    • StorageController.AssetTag
    • StorageController.Links.PCIeFunction
    • Volume.BlockSizeBytes
    • Volume.LogicalUnitNumber
  • Added support for PLDM Type5 UBM PIC firmware flashing behind expander.
    • ]]>
  • Fixed an issue where the host experienced BSOD while clearing the controller configuration.
  • Fixed controller lockups caused by incorrect address reads and partial RAM initialization for PCIe functions, leading to ECC errors.
  • Fixed issues with external storage.
  • Fixed issues with the SATA drive.
  • Fixed issues with the SED drive.
  • Fixed issues with the spare drive.
  • Corrected MCTP-related issues.
  • Fixed surface scan issues on the RAID 50.
  • Fixed issues encountered during heavy I/O operations.
  • Fixed volume issues on the failed drive.
  • Fixed issues for incorrect Severity reported in Redfish events.
  • Fixed issues for incorrect Status reported in Redfish resources.
  • Fixed an issue with improper capacity information in Redfish drive Name.
  • Fixed an issue where Redfish long running task status is not reported.
  • Fixed an issue where DurableNameFormat for RAID volumes are reported as UUID in RDE READ operations, but should be NAA.
  • Fixed an issue where failed to take ownership of, or to revert, a SED through Redfish.
  • Fixed an issue when a drive hosting a RAID 0 Volume is removed and reinserted, a VolumeOK event is not generated.
  • Fixed an issue where ILORest return "AccelerationMethod" as "ControllerCache" instead of “none” when controller cache is not enable or preset.
    • ]]>
  • Added support for saving Managed SED master key and reset key in cipher text in controller NVRAM instead of clear text.
  • Changed temperature polling period from 1 minute to 5 minutes for HBA mode drives that are in low power state.
  • Added support for clearing UREs in unmapped LBA range of fault tolerant logical drives.
  • Improved random write and mixed read-write performance.
  • Added support for SED encryption configuration through Redfish interface.
  • Added support of Redfish Chassis implementation for UBM Backplanes.
  • Added Redfish ACTION:
    • Storage.SetEncryptionKey
  • Added support for Redfish property PATCH:
    • Storage.EncryptionMode
    • Storage.HotspareActivationPolicy
    • Drive.HostspareReplacementMode
    • Drive.HotspareType
    • Volume.Encrypted
  • Added support for Redfish Status.Conditions property to resources:
    • Drive
    • Port
    • StorageController
    • StorageController.CacheSummary
    • Volume
  • Added support for Redfish properties:
    • Drive.DriveFormFactor
    • Drive.FirmwareVersion
    • Drive.Manufacture (SAS only)
    • Drive.SlotCapableProtocols
    • StorageController.AssetTag
    • StorageController.Links.PCIeFunction
    • Volume.BlockSizeBytes
    • Volume.LogicalUnitNumber
  • Added support for PLDM Type5 UBM PIC firmware flashing behind expander.
    • ]]>
  • Fixed an issue where the host experienced BSOD while clearing the controller configuration.
  • Fixed controller lockups caused by incorrect address reads and partial RAM initialization for PCIe functions, leading to ECC errors.
  • Fixed issues with external storage.
  • Fixed issues with the SATA drive.
  • Fixed issues with the SED drive.
  • Fixed issues with the spare drive.
  • Corrected MCTP-related issues.
  • Fixed surface scan issues on the RAID 50.
  • Fixed issues encountered during heavy I/O operations.
  • Fixed volume issues on the failed drive.
  • Fixed issues for incorrect Severity reported in Redfish events.
  • Fixed issues for incorrect Status reported in Redfish resources.
  • Fixed an issue with improper capacity information in Redfish drive Name.
  • Fixed an issue where Redfish long running task status is not reported.
  • Fixed an issue where DurableNameFormat for RAID volumes are reported as UUID in RDE READ operations, but should be NAA.
  • Fixed an issue where failed to take ownership of, or to revert, a SED through Redfish.
  • Fixed an issue when a drive hosting a RAID 0 Volume is removed and reinserted, a VolumeOK event is not generated.
    • ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         This component contains now available with the new HPE code signing key.

    ]]>         This product now supports SUSE Linux Enterprise Server 15 SP6.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.329.10 14.4.329.10 14.4.329.9 14.4.290.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.329.10 14.4.329.10 14.4.329.9 14.4.290.0
    ]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us
    • ]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>         This product corrects an issue where the adapter may go offline after firmware is flashed, but before reboot.

    ]]>         Updated to version 1.0.0.1

    ]]>         Added code signing project SDR_RPM_2024

    ]]>         Support FIPS mode.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>         This product enhanced the compatibility with the latest drivers.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Improve the FW about data mismatch after SPL issued.
    • ]]>
  • Improve the FW about data mismatch after SPL issued.
    • ]]>         Updated to version 9.4.10.20

    ]]>         Updated to version 9.4.9.21

    ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
    • ]]>
  • Fixed CA https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00126514en_us
    • ]]>         This component contains now available with the new HPE code signing key.

    ]]>         This product enhanced the compatibility with drivers.

    ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>
  • This firmware revision improves data integrity and reliability by optimizing adjacent track refresh parameters and management of emergency power loss table structure.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in emergency power loss events.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide some minor performance improvements.
    • ]]>
  • This firmware revision improves data integrity and reliability by optimizing adjacent track refresh parameters and management of emergency power loss table structure.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in emergency power loss events.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide some minor performance improvements.
    • ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>         This product enhanced the compatibility with the latest drivers.

    ]]>         Added support of ESXi 8.0 U1

    ]]>         The following fixes were incorporated in this version:

    • Code optimization to save memory repo.

    • TLB exception seen while doing esp reset when expander reset was in progress.

    • Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

    • Added whole new Delta PS-pmbus code , Updated the ESP version number.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.N for AMD 1st Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.N for AMD 1st Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Known Issues:

    None]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Provides proactive protection against contamination built up on the media and air-bearing surface of the heads by increased routine “sweeping” of the media surface.
    • ]]>
  • Provides proactive protection against contamination built up on the media and air-bearing surface of the heads by increased routine “sweeping” of the media surface.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         This product now sets the minimum number of allocated queues to 4.

    ]]>         This product fixes the ethtool set_channles timeout when RDMA is loaded.

    ]]>         This product now supports Red Hat Enterprise Linux 9 update 4.

    ]]>
  • This product fixes an issue where VLAN set operation may leads to deadlock. 
  • This product fixes an issue where a NULL pointer dereference in early reset.
  • This prodcut fixes an issue where users fail to change the number of queues (channels).
  • This product fixes an issue where system hang when VFs are created and VLAN configured.
    • ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         TBD

    ]]>
  • This product enhances to support Linux inbox driver to update firmware.
  • This product enhances the Get Package Status command support.
  • This product enhances to add a warning message when a non-supported dual-rate transceiver is used.
  • This product enhances the Addition of SFF 8472 Transceiver Power Details to RDE Port Metrics.
    • ]]>
  • This product addresses an issue where getting Transceiver Temperature erroneous unit value.
  • This product addresses an issue when NC-SI Query Pending NC PLDM Response is wrong when NIC does not have a pending PLDM request.
    • ]]>         SR 2.9.0/SR 3.4.0 RC

    ]]>
  • Made changes to enhance the testability of the driver. Changes do not impact end customers.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of an MR controller.

    Addressed an issue that Battery Failure IML message log may be incorrectly logged for MR Controller with Smart Storage Battery.

    Addressed an issue where system failed to boot with selected NVMe HDD by setting One-Time Boot Option in ILO Web.

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This revision of the System ROM includes the mitigation for security vulnerabilities CVE-2023-45229, CVE-2023-5678, and CVE-2021-38578. The security vulnerabilities are documented in the CVE report site. They are not unique to HPE servers. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options, navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Removed the value of "Not Specified" in System Configuration (RBSU) option "Server Security/Trusted Platform Module Options/Current TPM 2.0 Active PCRs" and set the default value as "SHA1 and SHA256".

    Known Issues:

    None]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>         This product corrects an issue where the adapter may go offline after firmware is flashed, but before reboot.

    ]]>         Added support of ESXi 8.0 U1
     

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Fixed an issue causing a digest mismatch or missing digest error when installing SSA tools on Linux systems with FIPS enabled.
    • ]]>
  • Fixed an issue causing a digest mismatch or missing digest error when installing SSA tools on Linux systems with FIPS enabled.
    • ]]>         TBD

    ]]>         This product fixed BSOD event not being detected when collecting mstdump on BUGCHECK while the device was already down.

    ]]>         Agentless Management Service

    • Fixed OID name hrSystemUptime is reported incorrectly
    ]]>         Agentless Management Service

    • Extend network adapter speed support with 20,40, and 100G for CPQNIC MIB cpqNicIfPhysAdapterConfSpeedDuplex OID.
    ]]>         Agentless Management Service

    • Fixed incorrect NVMe drive information displayed after hot plugging.
    • Fixed SSD wear status sudden peak value triggering SNMP trap false alarm.
    • Fixed incomplete uninstallation for amscli while upgrading Agentless Management Service.
    ]]>         TBD

    ]]>
  • This product enhances the Get Package Status command support.
  • This product enhances to add a warning message when a non-supported dual-rate transceiver is used.
  • This product enhances the Addition of SFF 8472 Transceiver Power Details to RDE Port Metrics.
    • ]]>
  • This product addresses an issue where getting Transceiver Temperature erroneous unit value.
  • This product addresses an issue when NC-SI Query Pending NC PLDM Response is wrong when NIC does not have a pending PLDM request.
  • The product addresses an issue where temperature error messages exceed critical values as seen in the Redfish Device Enablement (RDE) Ports schema when the LinkState is set to Disabled.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>
  • This fix is for unrecovered errors may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         Updated some Japanese translation.

    ]]>         Important Notes:

    Ver. 2.20_08-07-2024(B) contains updates to the firmware packaging and is functionally equivalent to ver. 2.20_08-07-2024. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 2.20_08-07-2024.

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of an MR controller.

    Addressed an issue that Battery Failure IML message log may be incorrectly logged for MR Controller with Smart Storage Battery.

    Addressed an issue where system failed to boot with selected NVMe HDD by setting One-Time Boot Option in ILO Web.

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None

    ]]>         Updated some Japanese translation.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of an MR controller.

    Addressed an issue that Battery Failure IML message log may be incorrectly logged for MR Controller with Smart Storage Battery.

    Addressed an issue where system failed to boot with selected NVMe HDD by setting One-Time Boot Option in ILO Web.

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added Windows 2025 Support
    • ]]>
  • Update build environment with SHA384
    • ]]>         TBD

    ]]>         This product addresses an issue where BSOD is seen.

    ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>         Added support for:

    RedHat Enterprise Linux 9.5

    Updated to driver version 10.02.12.01-k1

    ]]>         Added support for:

    Red Hat Enterprise Linux 8.10

    Red Hat Enterprise Linux 9.4

    SuSE Linux Enterprise Server 15sp6

    Updated Driver version 10.02.12.01-k1

    ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.

    •  

    ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.

    •  

    ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         TBD

    ]]>
  • This product enhances the Get Package Status command support.
  • This product enhances to add a warning message when a non-supported dual-rate transceiver is used.
  • This product enhances the Addition of SFF 8472 Transceiver Power Details to RDE Port Metrics.
    • ]]>
  • This product addresses an issue where getting Transceiver Temperature erroneous unit value.
  • This product addresses an issue when NC-SI Query Pending NC PLDM Response is wrong when NIC does not have a pending PLDM request.
    • ]]>         7.28 GCA/Production Drop

    ]]>         Fix an issue that VMware 8.0 command throws storcli pluggin error.

    ]]>
  • Add support for Non-Hotplug backplane configurations
  • Add support for Transport Level Retries (TLR) LTO Tape Drive
    • ]]>         Support HPE ProLiant DL145 Gen11 server.

    ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
    • ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.00

    09.15.00

    7.36

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.00

    09.15.00

    7.36

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.10.00 09.15.00 7.36 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.10.00 09.15.00 7.36 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.02.05

    9.14.00

    7.25

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.02.05

    9.14.00

    7.25

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.02.05

    9.14.00

    7.25

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.02.05

    9.14.00

    7.25

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.09.07

    09.14.01

    7.36

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.09.07

    09.14.01

    7.36

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.09.07 09.14.01 7.36 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.09.07 09.14.01 7.36 0.0
    ]]>         Important Notes:

    Ver. 1.0.0.22(B) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         ​​​​​​​

    ]]>         The following issues have been fixed in driver version 4.22.73.1006:

    • Performance issues were observed due to context switches over the hardware priority buffers that caused slower packet being sent when sending traffic with many different VLAN (CoS PCP/801.2p) priorities. To fix the issue, the driver provides a new module parameter trust_dscp_same_priority to map all DSCP priorities to the same traffic class to avoid such behavior.
    • A specific steering rule creation issue when the teaming mode is on.
    • Packets were dropped by ENS that were not set as MARK. Now MARK actions are available in both LAG and no LAG modes.
    ]]>         New features and changes in driver version 4.22.73.1004:

    • Firmware CR dump will now be collected automatically into ZDUMP PSOD or on livedump for debuggability purposes.
    • Enabled the driver to read the temperature from private statistics.

    To see the temperature, run:# nsxdp-cli ens uplink stats get -n vmnic1 | grep -i asicSensorTemperature

    • Added support for Hardware Accelerated GENEVE and VXLAN encapsulation and decapsulation for RoCE traffic.
    • Hardware accelerated flows can now be mirrored using the standard packet capture tools.
    • Added the ability to offload NSX Distributed Firewall rules by using in-hardware tracking of packet flows.
    • RSS support for ENS Model 1 improves performance using fewer CPU cores. This capability can be enabled using the "netq_rss_ens" module parameter.
    ]]>         Fixes included in driver version 4.22.73.1004:

    • Fixed an issue that caused a ParaVirtual VM to lose traffic after resuming from the suspend mode when SR-IOV was enabled in the system.
    • Cleaned steering rule from FDB when VF is being quiesced.
    • Fixed an issue that caused the driver to configure the incorrect SL value for RoCE with RDMACM.
    ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Mitigates the potential drive FW halt issue.
    • ]]>         Important Notes:

    Ver. 06.00.03.604(B) contains updates to the firmware packaging and is functionally equivalent to ver. 06.00.03.604. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 06.00.03.604.

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>         Upgraded to version 22.41.1000

     

    ]]>         New features and changes included in version 26.38.1002:

    • Enabled 200Gb/s out-of-the-box throughput on crypto capable devices.
      Note: If any crypto offloads is in use, 200Gb/s throughput can be achieved only after the next firmware reset
    • Added support for VF migration. The hypervisor can now suspend its VF, meaning from that point the VF cannot perform action such as send/receive traffic or run any command. In this firmware version only the suspend resume mode is supported (on the same VM).
    • Added a new MAD of class SMP that has the attributes hierarchy_Info as defined in the IB Specification and is used to query the hierarchy information stored on the node and the physical port.
    • Added pci_rescan_needed field to the MFRL access register to indicate whether a PCI rescan is needed based on the NV configurations issued by the software.
      Note: If the Keep Link Up NV configuration is changed, phyless reset will be blocked.
    • Added Precision Time Protocol (PTP) support.
      In this version, the support includes:
      16 PTP SQs only
      only 2 ports
      only RT clock mode
      In this version, the following are not supported:
      PTP packet drop
      PTP SQ on VF
      Note: All PTP SQs must be closed before operating LFWP (life fw patch).
    • Added support for HW Steering objects dump via resource dump interface.
      This support includes: STC, RTC, STE, modify argument, and modify pattern.
    • Added support for VF migration.
    • Added a new register (vhca_icm_ctrl access_reg) to enable querying and limiting the ICM pages in use.
    • Added support for creating a steering definer with a dword selector using create_match_definer_object and the "SELECT" format.
    • Enhanced the XRQ QP error information provided to the user in case QP goes into an error state. In such case, QUERY_QP will provide information on the syndrome type and which side caused the error.
    • [Beta] Added HW Steering support for the following:
      set, add and copy inline STC action
      set and copy actions for several fields using modify_pattern object and inline stc modify action
      FDB mode in HW steering using FDB_RX and FDB_TX flow table types
      ASO flow meter action via STC
      flow counter query using ASO WQE
      allocation of large bulks for the objects: STE, ASO flow meter and modify argument
      jumbo match RTC
      count action in STC
    • Added support for holdover mode to comply to SyncE specifications (EEC compliance) to limit the maximum phase transient response upon link loss. 
    • Added support for noise filtering to comply to the SyncE specifications requirements.
    • Optimized the performance of vDPA virtio including: throughput, QoS, and accuracy of min/max bandwidth when virtio works with the QoS settings.
    • The new vDPA virtio-net Full Emulation capability reduces the switchover time of creating a virtq from scratch during live migration, by creating the virtq beforehand on the target server.
      When swithover happens, the pre-created virtq will be used and modified with necessary parameters.
    • Updated the ibstat status reported when the phy link is down. Now QUERY_VPORT_STATE.max_tx_speed of UPLINK will not be reported as 0 anymore.
    • Replaced the deprecated NetworkPort schema with Port schema in NIC RDE implementation. 
    • Enabled the option to modify the ip_ecn field in the packet header in firmware steering.
    • Added support for advanced ZTR_RTTCC algorithm based on the Programmable CC platform to achieve better congestion control without dependency on the switch ECN marking.
    • DIM is used to tune moderation parameter dynamically for vDPA using an mlxreg command.
      To disable this capability, run:
      mlxreg -d /dev/mst/mt41686_pciconf0 --reg_id 0xc00d --reg_len 0x8 -s "0x4.1:1=0x0"
    • Modified the TX or RX cache invalidation behavior. TX or RX cache invalidation now does not occur automatically but only when the software performs the sync operation using the using sync_steering command.
    • Modified the maximum bulk size per single allocation from "log_table_size - log_num_unisizes", to allocate any range size, to remove limitations that HWS objects such as counters and modify arguments might encounter. 
    • Added support for creating a dynamic flex parser on untrusted function, and changed the flex parser cap for untrusted function to the following:  
      maximum flex parser node = 2
      maximum dw sample = 4
    • Added support for SNAPI (comm-channel) connection while running on raw ETH link.
    • Crypto features can be in either wrapped or unwrapped mode. Meaning, the key can be wrapped or in plaintext when running the CREATE_DEK PRM command.
      To comply with the requirements specified in FIPS publication, all the created DEKs must be wrapped.
      This feature adds new NV_CONFIG per device to control this mode, and enables the user to change all the crypto features to wrapped or cleartext.
    • [Beta] A new capability that enables the software to directly access ICM and write/modify the DEK objects. Such change improves the DEK object update rate by re-using DEK object instead of creating a new one.
      In addition, added the following:
      New for DEK object: bulk allocation, modify_dek cmd, and new mode - sw_wrapped.
      New general object INT_KEK

     

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Microsoft Windows Sever 2025.
    • ]]>
  • Added support for Microsoft Windows Sever 2022.
    • ]]>
  • Improves performance in certain file systems and implements fixes for several of the previous firmware’s shortcomings.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs.
    • ]]>
  • Improves performance in certain file systems and implements fixes for several of the previous firmware’s shortcomings.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs.
    • ]]>
  • Update build environment with SHA384
  • Update OS
    • ]]>         Initial Release

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Added support for Microsoft Server Windows 2022.
    • ]]>         TBD

    ]]>         This product correct an issue which the component can't read the current driver version.

    ]]>         Important Notes:

    Ver. 06.00.03.604(B) contains updates to the firmware packaging and is functionally equivalent to ver. 06.00.03.604. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 06.00.03.604.

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail WS2025 HSTI test.

    Addressed an issue where the PCIe link speed of Microchip AROC Gen10 SR controller (AROC controller) may downgrade.

    Known Issues:

    None]]>         Updated some Japanese translation.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of the MR controller.

    Addressed an issue where Redfish BIOS actions, ResetBIOS and ChangePassword may not work.

    Addressed an issue where Battery Failure IML message log may be incorrectly logged for the Smart Array controller with Smart Storage Battery.

    Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

    Known Issues:

    None

    ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>         This component contains now available with the new HPE code signing key.

    ]]>         This product now supports Red Hat Enterprise Linux 9 update 4.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>
  • Updated Supported Environments
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Mitigates the potential drive FW halt issue.
    • ]]>
  • Mitigates the potential drive FW halt issue.
    • ]]>         This product carries SBOM signatures.

    ]]>         This product carries SBOM signatures.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>         Added new Microsoft Option Rom UEFI CA 2023 secure boot key.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where certain Server Configuration Lock settings cannot be modified by Redfish interface.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.E for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>         This component contains now available with the new HPE code signing key.

    ]]>          

    This product now supports SUSE Linux Enterprise Server 15 SP6.

    ]]>
  • Fix contains code improvements for SMART reporting.
    • ]]>
  • Fix contains code improvements for SMART reporting.
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
    • ]]>
  • Fixed CA https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00126514en_us
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Improve random read/write perfomance.
    • ]]>
  • Fixed an issue where the driver incorrectly handled multi-path failover.
  • Fixed an issue where the driver could hang under heavy I/O load.
    • ]]>
  • Fixed an issue where the driver incorrectly handled multi-path failover.
  • Fixed an issue where the driver could hang under heavy I/O load.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         This product is updated to maintain compatibility with CS5.0 compliance

    ]]>         This product is updated to maintain compatibility with CNSA (Commercial National Security Algorithm) compliance.

    ]]>
  • This product correct an issue where System crash while upgrading with NPAR SRIOV-EP mode enabled.
  • This product correct an issue where BSOD in Windows NDIS driver while in WS2022 PCS Configuration.
     
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00138902en_us which will be active on 24-April-2024.
    • ]]>
  • This maintenance revision improves data integrity.  The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00138902en_us which will be active on 24-April-2024.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Update build environment with SHA384
  • Update OS
    • ]]>
  • Modify Product ID to "A4200 Gen10P LFF" and "A4200 Gen10P SFF" to distinguish the different generation expander backplane.
    • ]]>
  • Provides proactive protection against contamination built up on the media and air-bearing surface of the heads by increased routine “sweeping” of the media surface.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00127593en_us
    • ]]>
  • Provides proactive protection against contamination built up on the media and air-bearing surface of the heads by increased routine “sweeping” of the media surface.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         This product added a warning message when RDMA critical error occurs.

    ]]>         This product fixed an issue which NIC port was in autonegotiation mode, many DOWN/UP sequences was applied by the link partner, and NIC port remained in DOWN state randomly.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Changes and improvements that have been made in the firmware HPK4 which disable MCTP over PCIe VDM over the previous firmware.

    ]]>         Changes and improvements that have been made in the firmware HPK4 which disable MCTP over PCIe VDM over the previous firmware.

    ]]>         TBD

    ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>
  • To improve the output format of the NVMe drive health log for the show command.
    • ]]>
  • Fixed an issue where failed drive details were displayed multiple times in the 'show config' output.
  • Fixed an issue where the array creation command failed when executed with the drives=all and drivetype=sata_hdd parameters.
  • Fixed an issue where users encountered a failure when launching the SSASCRIPTING tool to restore a RAID configuration with an unsupported parameter for PrebootHealthReporting.
  • Fixed an issue causing a digest mismatch or missing digest error when installing SSA tools on Linux systems with FIPS enabled.
    • ]]>
  • To improve the output format of the NVMe drive health log for the show command.
    • ]]>
  • Fixed an issue where failed drive details were displayed multiple times in the 'show config' output.
  • Fixed incorrect error messages displayed in SSACLI when the modify command threw an error if the 'drive' and 'drivetype' parameters coexisted.
  • Fixed an issue where the array creation command failed when executed with the drives=all and drivetype=sata_hdd parameters.
  • Fixed an issue where the drives behind the enclosures were missing in the SSACLI output.
  • Fixed an issue where users encountered a failure when launching the SSASCRIPTING tool to restore a RAID configuration with an unsupported parameter for PrebootHealthReporting.
  • Fixed an issue causing a digest mismatch or missing digest error when installing SSA tools on Linux systems with FIPS enabled.
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Added support for Microsoft Server Windows 2022.
    • ]]>         TBD

    ]]>
  • This product addressed an issue where Network Interface initialization failure under OS or Firmware rollback may be seen with LLDP enabled.
  • This product addressed an issue where RDE PermanentMACAddress changes simultaneously when send PATCH request for MACAddress property with Firmware 4.30.
    • ]]>
  • Fix for BSOD issue due to SRIS misdetection and FW Commit command via PCIe VDM (MCTP OVER PCIe) timed out.
    • ]]>
  • Fix for BSOD issue due to SRIS misdetection and FW Commit command via PCIe VDM (MCTP OVER PCIe) timed out.
    • ]]>         Firmware for the following devices has been updated to 20.42.1000:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.42.1000:

    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 20.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Incorrect MPLS packets discards flow when the GLOBAL pause capability was disabled.
    ]]>         Firmware for the following devices has been updated to 20.41.1000:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.41.1000:

    • Added support for steering match on packet l4_type through FTG/FTE.
    ]]>         No fixes are included in version 20.41.1000.

    ]]>         Added new Microsoft Option Rom UEFI CA 2023 secure boot key.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where certain Server Configuration Lock settings cannot be modified by Redfish interface.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.E for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>         This package supports only Red Hat Enterprise Linux (RHEL) Distros

    Modified adapter support -- added 16Gb adapter support ( 1200E,1100Q single and dual adapter support )

    ]]>         This package supports only Red Hat Enterprise Linux (RHEL) Distros

    This Component is FIPs enabled.

    ]]>         This Component is FIPs enabled.

    ]]>         None

    ]]>         Built with new RPM signing key.

    ]]>         none

    ]]>         Enabling rpm installation when OS is in FIPS mode

     

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Updated supported environments
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Support non-hotplug backplane configuration which is used in HPE ProLiant MicroServer Gen11
    • All the Redfish Drive resources will be listed directly under storage with "%L<StorageId>/Drives/{DriveId}¨
    • Box field will not be displayed anywhere as there is no Box in this case
  • LTO support
    • Please check Tape Compatibility matrix on SPoCK (www.hpe.com/storage/TapeCompatibilityMatrix)
    • On Linux, using IO sizes larger than 256KB may result in an error
    • Redfish support is not available for Tape drives
    • The Tape drive appears as a 0KB drive in MRSA and storcli
    • Note: LTO does not support OBSE. OBSE will show fail result on the server with LTO installed.
  • Change SBR (secondary bus reset) handle method. With this change, the boot up time is shorten for the vm which has passthrough MR controller configured
  • Firmware logging (snapdump) improvement
    • Include protocol layer logs from initial discovery at start of day to address Drive lost across reboots
    • Additional snapdumps are generated if drive failure conditions are detected
    • Use storcli /cx set captureSodPlLogs=<on|off> to enable/disable the function
    • ]]>
  • Fix a00138425en_us: HPE MR Gen10 Plus/Gen11 Controllers - The Health Status Is Erroneously Displayed As "OK" In The Server Health Tab After a Drive or Storage Volume is in a Failed State.
  • Fix an issue that PLDM firmware update for controller and downstream device may failed due to checksum error.
  • Fix an issue that ControllerPreviousError (0x7f833119) event may be logged in IML when there is large capacity NVMe drive installed and graceful shutdown.
  • Fix an issue that controller may crash during firmware self-activation and cause iLO to show firmware update fail.
  • Fix a rare issue that ControllerPreviousError (0x7f833119) event may be logged in IML when server reboot and there is firmware log migration.
  • Fix a rare issue that imported secured drives in a span (parity group) became unsecured and data is not recovered. The issue happens only when all drives in a span are removed, re-insert and do import operation.
  • Fix an issue that controller reset may occur and not be recovered when adding drives to do transformation and get logical drive information from storcli, MRSA or Redfish client simultaneously.
  • Fix a rare issue that data mis compare may happen when simultaneously write and read data for many times before the written data is flushed to physical drive.
  • Fix a rare issue that drive might be marked as Unconfigured Bad when hot-insert.
  • Fix a rare issue that controller may assert and ControllerPreviousError (0x7f833119) event is logged in IML when there is IO running and reset happens on JBOD drive.
  • Fix a rare issue that drive may be marked as Unconfigured Bad if there is link reset happens.
  • Fix an issue that Read(32) or Write(32) CDB sent to NVMe drive reported incorrect additional sense code.
  • Fix a rare issue that controller may stop responding when there is IO running and plugout drives to make volume offline.
  • Fix an issue that drive removal events are delayed when NVMe drive hot-insert and hotremove are performed when mixing SAS/SATA and NVMe drives.
  • Fix a rare issue that controller may assert if UBM backplane firmware update failed.
  • Fix an assertion failure that may happens when running IO and task management. In this case, IO's marked for abort are getting completed before the firmware really get a chance to abort them.
  • Fix an issue that Redfish client is allowed to create different RAID level on the existing span (parity group) configuration which is unsupported.
  • Fix an issue that logical drive creation with "0" capacity creating full drive capacity in Redfish client. It is not allowed to use CapacityBytes less than 1GB.
    • ]]>
  • Support non-hotplug backplane configuration which is used in HPE ProLiant MicroServer Gen11
    • All the Redfish Drive resources will be listed directly under storage with "%L<StorageId>/Drives/{DriveId}¨
    • Box field will not be displayed anywhere as there is no Box in this case
  • LTO support
    • Please check Tape Compatibility matrix on SPoCK (www.hpe.com/storage/TapeCompatibilityMatrix)
    • On Linux, using IO sizes larger than 256KB may result in an error
    • Redfish support is not available for Tape drives
    • The Tape drive appears as a 0KB drive in MRSA and storcli
    • Note: LTO does not support OBSE. OBSE will show fail result on the server with LTO installed.
  • Change SBR (secondary bus reset) handle method. With this change, the boot up time is shorten for the vm which has passthrough MR controller configured
  • Firmware logging (snapdump) improvement
    • Include protocol layer logs from initial discovery at start of day to address Drive lost across reboots
    • Additional snapdumps are generated if drive failure conditions are detected
    • Use storcli /cx set captureSodPlLogs=<on|off> to enable/disable the function
    • ]]>
  • Fix a00138425en_us: HPE MR Gen10 Plus/Gen11 Controllers - The Health Status Is Erroneously Displayed As "OK" In The Server Health Tab After a Drive or Storage Volume is in a Failed State.
  • Fix an issue that PLDM firmware update for controller and downstream device may failed due to checksum error.
  • Fix an issue that ControllerPreviousError (0x7f833119) event may be logged in IML when there is large capacity NVMe drive installed and graceful shutdown.
  • Fix an issue that controller may crash during firmware self-activation and cause iLO to show firmware update fail.
  • Fix a rare issue that ControllerPreviousError (0x7f833119) event may be logged in IML when server reboot and there is firmware log migration.
  • Fix a rare issue that imported secured drives in a span (parity group) became unsecured and data is not recovered. The issue happens only when all drives in a span are removed, re-insert and do import operation.
  • Fix an issue that controller reset may occur and not be recovered when adding drives to do transformation and get logical drive information from storcli, MRSA or Redfish client simultaneously.
  • Fix a rare issue that data mis compare may happen when simultaneously write and read data for many times before the written data is flushed to physical drive.
  • Fix a rare issue that drive might be marked as Unconfigured Bad when hot-insert.
  • Fix a rare issue that drive may be marked as Unconfigured Bad if there is link reset happens.
  • Fix an issue that Read(32) or Write(32) CDB sent to NVMe drive reported incorrect additional sense code.
  • Fix a rare issue that controller may stop responding when there is IO running and plugout drives to make volume offline.
  • Fix an issue that drive removal events are delayed when NVMe drive hot-insert and hotremove are performed when mixing SAS/SATA and NVMe drives.
  • Fix a rare issue that controller may assert if UBM backplane firmware update failed.
  • Fix an assertion failure that may happens when running IO and task management. In this case, IO's marked for abort are getting completed before the firmware really get a chance to abort them.
  • Fix an issue that Redfish client is allowed to create different RAID level on the existing span (parity group) configuration which is unsupported.
  • Fix an issue that logical drive creation with "0" capacity creating full drive capacity in Redfish client. It is not allowed to use CapacityBytes less than 1GB.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of an MR controller.

    Addressed an issue where Windows Server 2025 HLK TPM2.0 UEFI Preboot Interface test failed on XL450 Gen10.

    Addressed an issue where WHLK HSTI test failed.

    Addressed an issue where the "Physical Drive missing" message appears twice in POST when a drive was removed and rebooted with incorrect severity in IML.

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options and navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Addressed an issue where system may encounter an RSOD while updating the SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes the mitigation for security vulnerabilities CVE-2023-45229, CVE-2022-36763, CVE-2022-36764, CVE-2021-38578, CVE-2023-5678 and CVE-2024-0727. The security vulnerabilities are documented in the CVE report site. They are not unique to HPE servers. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added value "C6 without C1E" in System Configuration (RBSU) option "Power Management/Advanced Power Options menu/Minimum Processor Idle Power Core C-State". When selected, the Minimum Processor Idle Power Core C-State is C6 with C1E disabled. This setting has the following Redfish property: /redfish/v1/systems/1/bios/MinProcIdlePower

    Known Issues:

    None]]>         TBD

    ]]>
  • This product enhances the abortive cleanup mechanisms for NDSPI interfaces.
  • This product enhances the cleanup of adapter instance structures during driver unloading.
  • This product enhances the cleanup process for NDIS DMA resources when the driver is unloaded.
  • This product enhances event log messaging.
    • ]]>
  • This product fixes the issue of standardized INF keyword failures in the driver’s INF file.
  • This product fixes the issue of static analysis warnings in WMI (Windows Management Instrumentation) string handling for OIDs (Object Identifiers).
  • This product fixes the driver's queue pair suspension state-checking.
    • ]]>         This product now supports SUSE Linux Enterprise Server 15 SP6.

    ]]>         This product fixes some minor compiling issues such as warning message.

    ]]>
  • Optimize sensor reporting to improve failure rate - AFR (Annual Failure Rate) metrics
    • ]]>
  • Optimize sensor reporting to improve failure rate - AFR (Annual Failure Rate) metrics
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Added support for Microsoft Server Windows 2022.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • New release for version 7.728.02.00.
    • ]]>
  • Fix an issue that controller may stuck in boot state and cause unexpected controller reset when there is OCR (online controller reset). OCR can happen when doing online firmware update.
    • ]]>
  • New release for version 7.728.02.00.
    • ]]>
  • Fix an issue that controller may stuck in boot state and cause unexpected controller reset when there is OCR (online controller reset). OCR can happen when doing online firmware update.
    • ]]>         TBD

    ]]>         This product enhances NVRAM configuration during the firmware upgrade.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Added new Microsoft Option Rom UEFI CA 2023 secure boot key.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where certain Server Configuration Lock settings cannot be modified by Redfish interface.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.E for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>         TBD

    ]]>         This product enhances NVRAM configuration during the firmware upgrade.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>         TBD

    ]]>         This product enhanced the compatibility with VMware firmware component 1.34.0.

    ]]>         New release for version 7.728.2.0.

    ]]>         New release for version 7.726.1.0.

    ]]>         This version is in compliance with IPU.2024.1 guidance.

    ]]>         Important Notes:

    Ver. 04.04.04.603(B) contains updates to the firmware packaging and is functionally equivalent to ver. 04.04.04.603. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 04.04.04.603.

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/22/2024) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2023-35191. This issue is not unique to HPE servers.

    Known Issues:

    None

    ]]>         This version is in compliance with IPU.2024.1 guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/22/2024) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2023-35191. This issue is not unique to HPE servers.

    Known Issues:

    None]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Added support for:

    RedHat Enterprise Linux 9.5

    Updated to driver version 10.02.13.00.a3-k1

    ]]>         Added support for:

    RedHat Enterprise Linux 9.5

    Updated to driver version 10.02.13.00-k1

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         This product addresses the issue of inconsistent metadata within the component products.

    ]]>         The following new features and changes have been included in version 24.04-0.6.6.1:

    • Added support for Live Migration. Live migration refers to the process of moving a guest virtual machine (VM) running on one physical host to another host without disrupting normal operations or causing any downtime or other adverse effects for the end user.
    • Added support for multicast control path packet snooping (IGMP/MLD) and offload of MDB notifications in order to replicate multicast traffic to multiple destinations in the hardware.
    • Increased the netdev maximum channels from 128 to 256 for systems with a high number of cores.
    • Enhanced performance by removing the internal Rx path from the internal page cache, thus allowing the driver to always use the kernel's page_pool.
    • Enhanced performance by adding the following modifications in XDP:
      • Added XDP multi-buffer support to the default RQ type (Striding RQ)
      • Added support for XDP multi-buffer redirect-in
      • Allowed non-linear single-segment frames in XDP TX MPWQE
    • Increased the maximum outstanding DC atomic reads to 32 to enable the driver to handle reads larger than 8K. Now log_max_ra_{res/req}_dc is exposed in DV API, enabling the user to see both RC and DC values.
    • Added support for Linux kernel DPLL subsystem as a mechanism for working with clock signals in NVIDIA's proprietary synchronous ethernet protocol daemon. This new mechanism enables the use of both VFs and SFs, and is supported starting from korg6.8.
    • Limited the number of MADs received on the wire that are queued in the kernel as they are waiting for the user-space application to 200k per umad file. By that, preventing malicious or faulty behavior of flooding a node with MADs and exhausting its memory.
    • Added the option to expose offloaded FDB state (flags, counters, etc.) via debugfs for debugging purposes.

    $ cat mlx5/0000\:08\:00.0/esw/bridge/bridge1/fdb

    DEV MAC VLAN PACKETS BYTES LASTUSE FLAGS

    enp8s0f0_1 e4:0a:05:08:00:06 2 2 204 4295567112 0x0

    enp8s0f0_0 e4:0a:05:08:00:03 2 3 278 4295567112 0x0

    • Added support for over KORG 6.7 read frequency_diff.
    ]]>         The following issues have been fixed in version 24.04-0.6.6.1:

    • An issue related to the comparison process between the SW steering and FW steering modes to avoid kernel crashes incidences.
    • The tc_wrap tool did not work properly when VLAN was configured as the tool incorrectly handled the library function return value.
    • An IPSec issue that resulted in Crypto offload getting disabled.
    • Memory corruption issue when running XDP traffic.
    • IFA packets were sent from the incorrect port on VF LAG.
    • An issue that caused a deadlock in the flow of disabling the LAG when changing eswitch mode from switchdev to legacy when a LAG bond existed on the machine.
    • In systems with 64k page size, applications opening a substantial amount of RDMA resources such as UARs, QPs, and CQs might encounter errors during the creation of these resources due to limitations in PCI BAR size.
    • PFC configuration was reset when updating the cable length via mlnx_qos.
    ]]>         The following new features and changes have been included in version 24.04-0.6.6.1:

    • Added support for Live Migration. Live migration refers to the process of moving a guest virtual machine (VM) running on one physical host to another host without disrupting normal operations or causing any downtime or other adverse effects for the end user.
    • Added support for multicast control path packet snooping (IGMP/MLD) and offload of MDB notifications in order to replicate multicast traffic to multiple destinations in the hardware.
    • Increased the netdev maximum channels from 128 to 256 for systems with a high number of cores.
    • Enhanced performance by removing the internal Rx path from the internal page cache, thus allowing the driver to always use the kernel's page_pool.
    • Enhanced performance by adding the following modifications in XDP:
      • Added XDP multi-buffer support to the default RQ type (Striding RQ)
      • Added support for XDP multi-buffer redirect-in
      • Allowed non-linear single-segment frames in XDP TX MPWQE
    • Increased the maximum outstanding DC atomic reads to 32 to enable the driver to handle reads larger than 8K. Now log_max_ra_{res/req}_dc is exposed in DV API, enabling the user to see both RC and DC values.
    • Added support for Linux kernel DPLL subsystem as a mechanism for working with clock signals in NVIDIA's proprietary synchronous ethernet protocol daemon. This new mechanism enables the use of both VFs and SFs, and is supported starting from korg6.8.
    • Limited the number of MADs received on the wire that are queued in the kernel as they are waiting for the user-space application to 200k per umad file. By that, preventing malicious or faulty behavior of flooding a node with MADs and exhausting its memory.
    • Added the option to expose offloaded FDB state (flags, counters, etc.) via debugfs for debugging purposes.

    $ cat mlx5/0000\:08\:00.0/esw/bridge/bridge1/fdb

    DEV MAC VLAN PACKETS BYTES LASTUSE FLAGS

    enp8s0f0_1 e4:0a:05:08:00:06 2 2 204 4295567112 0x0

    enp8s0f0_0 e4:0a:05:08:00:03 2 3 278 4295567112 0x0

    • Added support for over KORG 6.7 read frequency_diff.
    ]]>         The following issues have been fixed in version 24.04-0.6.6.1:

    • An issue related to the comparison process between the SW steering and FW steering modes to avoid kernel crashes incidences.
    • The tc_wrap tool did not work properly when VLAN was configured as the tool incorrectly handled the library function return value.
    • An IPSec issue that resulted in Crypto offload getting disabled.
    • Memory corruption issue when running XDP traffic.
    • IFA packets were sent from the incorrect port on VF LAG.
    • An issue that caused a deadlock in the flow of disabling the LAG when changing eswitch mode from switchdev to legacy when a LAG bond existed on the machine.
    • In systems with 64k page size, applications opening a substantial amount of RDMA resources such as UARs, QPs, and CQs might encounter errors during the creation of these resources due to limitations in PCI BAR size.
    • PFC configuration was reset when updating the cable length via mlnx_qos.
    ]]>
  • Updated SBOM requirement
    • ]]>
  • Updated installation time
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with drivers.

    ]]>         This product addresses the issue of inconsistent metadata within the component products.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • This product now supports ethtool flow-type ether.
  • This product now adds VF reset on Tx Malicious Driver Detection(MDD) event.
  • This product now supports kernel's DPLL configuration.
    • ]]>         This product now supports Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK NG Adapter for HPE.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         This product fixes the kernel compilation issue.

    ]]>         This product now supports Red Hat Enterprise Linux 9 update 4.

    ]]>         This product fixes some minor compiling issues such as warning message.

    ]]>         The following new features and changes have been included in version 24.04-0.6.6.1:

    • Added support for Live Migration. Live migration refers to the process of moving a guest virtual machine (VM) running on one physical host to another host without disrupting normal operations or causing any downtime or other adverse effects for the end user.
    • Added support for multicast control path packet snooping (IGMP/MLD) and offload of MDB notifications in order to replicate multicast traffic to multiple destinations in the hardware.
    • Increased the netdev maximum channels from 128 to 256 for systems with a high number of cores.
    • Enhanced performance by removing the internal Rx path from the internal page cache, thus allowing the driver to always use the kernel's page_pool.
    • Enhanced performance by adding the following modifications in XDP:
      • Added XDP multi-buffer support to the default RQ type (Striding RQ)
      • Added support for XDP multi-buffer redirect-in
      • Allowed non-linear single-segment frames in XDP TX MPWQE
    • Increased the maximum outstanding DC atomic reads to 32 to enable the driver to handle reads larger than 8K. Now log_max_ra_{res/req}_dc is exposed in DV API, enabling the user to see both RC and DC values.
    • Added support for Linux kernel DPLL subsystem as a mechanism for working with clock signals in NVIDIA's proprietary synchronous ethernet protocol daemon. This new mechanism enables the use of both VFs and SFs, and is supported starting from korg6.8.
    • Limited the number of MADs received on the wire that are queued in the kernel as they are waiting for the user-space application to 200k per umad file. By that, preventing malicious or faulty behavior of flooding a node with MADs and exhausting its memory.
    • Added the option to expose offloaded FDB state (flags, counters, etc.) via debugfs for debugging purposes.

    $ cat mlx5/0000\:08\:00.0/esw/bridge/bridge1/fdb

    DEV MAC VLAN PACKETS BYTES LASTUSE FLAGS

    enp8s0f0_1 e4:0a:05:08:00:06 2 2 204 4295567112 0x0

    enp8s0f0_0 e4:0a:05:08:00:03 2 3 278 4295567112 0x0

    • Added support for over KORG 6.7 read frequency_diff.
    ]]>         The following issues have been fixed in version 24.04-0.6.6.1:

    • An issue related to the comparison process between the SW steering and FW steering modes to avoid kernel crashes incidences.
    • The tc_wrap tool did not work properly when VLAN was configured as the tool incorrectly handled the library function return value.
    • An IPSec issue that resulted in Crypto offload getting disabled.
    • Memory corruption issue when running XDP traffic.
    • IFA packets were sent from the incorrect port on VF LAG.
    • An issue that caused a deadlock in the flow of disabling the LAG when changing eswitch mode from switchdev to legacy when a LAG bond existed on the machine.
    • In systems with 64k page size, applications opening a substantial amount of RDMA resources such as UARs, QPs, and CQs might encounter errors during the creation of these resources due to limitations in PCI BAR size.
    • PFC configuration was reset when updating the cable length via mlnx_qos.
    ]]>         The following new features and changes have been included in version 24.04-0.6.6.1:

    • Added support for Live Migration. Live migration refers to the process of moving a guest virtual machine (VM) running on one physical host to another host without disrupting normal operations or causing any downtime or other adverse effects for the end user.
    • Added support for multicast control path packet snooping (IGMP/MLD) and offload of MDB notifications in order to replicate multicast traffic to multiple destinations in the hardware.
    • Increased the netdev maximum channels from 128 to 256 for systems with a high number of cores.
    • Enhanced performance by removing the internal Rx path from the internal page cache, thus allowing the driver to always use the kernel's page_pool.
    • Enhanced performance by adding the following modifications in XDP:
      • Added XDP multi-buffer support to the default RQ type (Striding RQ)
      • Added support for XDP multi-buffer redirect-in
      • Allowed non-linear single-segment frames in XDP TX MPWQE
    • Increased the maximum outstanding DC atomic reads to 32 to enable the driver to handle reads larger than 8K. Now log_max_ra_{res/req}_dc is exposed in DV API, enabling the user to see both RC and DC values.
    • Added support for Linux kernel DPLL subsystem as a mechanism for working with clock signals in NVIDIA's proprietary synchronous ethernet protocol daemon. This new mechanism enables the use of both VFs and SFs, and is supported starting from korg6.8.
    • Limited the number of MADs received on the wire that are queued in the kernel as they are waiting for the user-space application to 200k per umad file. By that, preventing malicious or faulty behavior of flooding a node with MADs and exhausting its memory.
    • Added the option to expose offloaded FDB state (flags, counters, etc.) via debugfs for debugging purposes.

    $ cat mlx5/0000\:08\:00.0/esw/bridge/bridge1/fdb

    DEV MAC VLAN PACKETS BYTES LASTUSE FLAGS

    enp8s0f0_1 e4:0a:05:08:00:06 2 2 204 4295567112 0x0

    enp8s0f0_0 e4:0a:05:08:00:03 2 3 278 4295567112 0x0

    • Added support for over KORG 6.7 read frequency_diff.
    ]]>         The following issues have been fixed in version 24.04-0.6.6.1:

    • An issue related to the comparison process between the SW steering and FW steering modes to avoid kernel crashes incidences.
    • The tc_wrap tool did not work properly when VLAN was configured as the tool incorrectly handled the library function return value.
    • An IPSec issue that resulted in Crypto offload getting disabled.
    • Memory corruption issue when running XDP traffic.
    • IFA packets were sent from the incorrect port on VF LAG.
    • An issue that caused a deadlock in the flow of disabling the LAG when changing eswitch mode from switchdev to legacy when a LAG bond existed on the machine.
    • In systems with 64k page size, applications opening a substantial amount of RDMA resources such as UARs, QPs, and CQs might encounter errors during the creation of these resources due to limitations in PCI BAR size.
    • PFC configuration was reset when updating the cable length via mlnx_qos.
    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>
  • Added support for saving Managed SED master key and reset key in cipher text in controller NVRAM instead of clear text.
  • Changed temperature polling period from 1 minute to 5 minutes for HBA mode drives that are in low power state.
  • Added support for clearing UREs in unmapped LBA range of fault tolerant logical drives.
  • Improved random write and mixed read-write performance.
  • Added support for SED encryption configuration through Redfish interface.
  • Added support of Redfish Chassis implementation for UBM Backplanes.
  • Added Redfish ACTION:
    • Storage.SetEncryptionKey
  • Added support for Redfish property PATCH:
    • Storage.EncryptionMode
    • Storage.HotspareActivationPolicy
    • Drive.HostspareReplacementMode
    • Drive.HotspareType
    • Volume.Encrypted
  • Added support for Redfish Status.Conditions property to resources:
    • Drive
    • Port
    • StorageController
    • StorageController.CacheSummary
    • Volume
  • Added support for Redfish properties:
    • Drive.DriveFormFactor
    • Drive.FirmwareVersion
    • Drive.Manufacture (SAS only)
    • Drive.SlotCapableProtocols
    • StorageController.AssetTag
    • StorageController.Links.PCIeFunction
    • Volume.BlockSizeBytes
    • Volume.LogicalUnitNumber
  • Added support for PLDM Type5 UBM PIC firmware flashing behind expander.
    • ]]>
  • Fixed an issue where the host experienced BSOD while clearing the controller configuration.
  • Fixed controller lockups caused by incorrect address reads and partial RAM initialization for PCIe functions, leading to ECC errors.
  • Fixed issues with external storage.
  • Fixed issues with the SATA drive.
  • Fixed issues with the SED drive.
  • Fixed issues with the spare drive.
  • Corrected MCTP-related issues.
  • Fixed surface scan issues on the RAID 50.
  • Fixed issues encountered during heavy I/O operations.
  • Fixed volume issues on the failed drive.
  • Fixed issues for incorrect Severity reported in Redfish events.
  • Fixed issues for incorrect Status reported in Redfish resources.
  • Fixed an issue with improper capacity information in Redfish drive Name.
  • Fixed an issue where Redfish long running task status is not reported.
  • Fixed an issue where DurableNameFormat for RAID volumes are reported as UUID in RDE READ operations, but should be NAA.
  • Fixed an issue where failed to take ownership of, or to revert, a SED through Redfish.
  • Fixed an issue when a drive hosting a RAID 0 Volume is removed and reinserted, a VolumeOK event is not generated.

  • Fixed an issue where ILORest return "AccelerationMethod" as "ControllerCache" instead of “none” when controller cache is not enable or preset.

    • ]]>
  • Added support for saving Managed SED master key and reset key in cipher text in controller NVRAM instead of clear text.
  • Changed temperature polling period from 1 minute to 5 minutes for HBA mode drives that are in low power state.
  • Added support for clearing UREs in unmapped LBA range of fault tolerant logical drives.
  • Improved random write and mixed read-write performance.
  • Added support for SED encryption configuration through Redfish interface.
  • Added support of Redfish Chassis implementation for UBM Backplanes.
  • Added Redfish ACTION:
    • Storage.SetEncryptionKey
  • Added support for Redfish property PATCH:
    • Storage.EncryptionMode
    • Storage.HotspareActivationPolicy
    • Drive.HostspareReplacementMode
    • Drive.HotspareType
    • Volume.Encrypted
  • Added support for Redfish Status.Conditions property to resources:
    • Drive
    • Port
    • StorageController
    • StorageController.CacheSummary
    • Volume
  • Added support for Redfish properties:
    • Drive.DriveFormFactor
    • Drive.FirmwareVersion
    • Drive.Manufacture (SAS only)
    • Drive.SlotCapableProtocols
    • StorageController.AssetTag
    • StorageController.Links.PCIeFunction
    • Volume.BlockSizeBytes
    • Volume.LogicalUnitNumber
  • Added support for PLDM Type5 UBM PIC firmware flashing behind expander.
    • ]]>
  • Fixed an issue where the host experienced BSOD while clearing the controller configuration.
  • Fixed controller lockups caused by incorrect address reads and partial RAM initialization for PCIe functions, leading to ECC errors.
  • Fixed issues with external storage.
  • Fixed issues with the SATA drive.
  • Fixed issues with the SED drive.
  • Fixed issues with the spare drive.
  • Corrected MCTP-related issues.
  • Fixed surface scan issues on the RAID 50.
  • Fixed issues encountered during heavy I/O operations.
  • Fixed volume issues on the failed drive.
  • Fixed issues for incorrect Severity reported in Redfish events.
  • Fixed issues for incorrect Status reported in Redfish resources.
  • Fixed an issue with improper capacity information in Redfish drive Name.
  • Fixed an issue where Redfish long running task status is not reported.
  • Fixed an issue where DurableNameFormat for RAID volumes are reported as UUID in RDE READ operations, but should be NAA.
  • Fixed an issue where failed to take ownership of, or to revert, a SED through Redfish.
  • Fixed an issue when a drive hosting a RAID 0 Volume is removed and reinserted, a VolumeOK event is not generated.
    • ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>         Added Support for:

    Red Hat Enterprise 9.5

    Updated to version 14.4.329.14

    ]]>          

    Updated to version 14.4.329.9

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         This product correct an issue which fixed an issue that VMs lose connectivity and system freezes with Windows Azure HCI.

    ]]>
  • Improve random read/write perfomance.
    • ]]>
  • Add  "IO is completed, no reset is required" kernel message when the pending SCSI IO get completed before issuing the reset
     
    • ]]>
  • Fix an issue that Doorbell, Host diagnostic and Scratchpad registers could return 0.
    • ]]>         Fix an issue that kernel WARNING with call trace may be logged when server shut down/rebooted.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.N for AMD 1st Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.N for AMD 1st Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Known Issues:

    None]]>         Support SHA384

    ]]>         Support SHA384

    ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Corrective actions to fix potential background media scan issue.
    • ]]>
  • Corrective actions to fix potential background media scan issue.
    • ]]>         TBD

    ]]>
  • This product enhances the abortive cleanup mechanisms for NDSPI interfaces.
  • This product enhances the cleanup of adapter instance structures during driver unloading.
  • This product enhances the cleanup process for NDIS DMA resources when the driver is unloaded.
  • This product enhances event log messaging.
    • ]]>
  • This product fixes the issue of standardized INF keyword failures in the driver’s INF file.
  • This product fixes the issue of static analysis warnings in WMI (Windows Management Instrumentation) string handling for OIDs (Object Identifiers).
  • This product fixes the driver's queue pair suspension state-checking.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>
  • Bug fixes for D3-S4520/S4620 2.5" and M.2
    • ]]>         This product fixes the kernel compilation issue.

    ]]>         This product now supports Red Hat Enterprise Linux 8 update 10.

    ]]>
  • Updated Supported Environments
    • ]]>
  • Updated SBOM requirement
    • ]]>         This component contains now available with the new HPE code signing key.

    ]]>         This product now supports Red Hat Enterprise Linux 8 update 10.

    ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.4030:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

    No new Features and changes included in version 12.28.2302.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No new fixes have been added in version 12.28.2302.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 12.28.2006:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.3006:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

    New Features and changes included in version 12.28.2006:

    • Increased the maximum XRQ number to 512.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in firmware version 12.28.2006:

    • Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
    • Increased PHY power consumption limit to 1.5w.
    • Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         The following new features and changes have been included in version 24.04-0.6.6.1:

    • Added support for Live Migration. Live migration refers to the process of moving a guest virtual machine (VM) running on one physical host to another host without disrupting normal operations or causing any downtime or other adverse effects for the end user.
    • Added support for multicast control path packet snooping (IGMP/MLD) and offload of MDB notifications in order to replicate multicast traffic to multiple destinations in the hardware.
    • Increased the netdev maximum channels from 128 to 256 for systems with a high number of cores.
    • Enhanced performance by removing the internal Rx path from the internal page cache, thus allowing the driver to always use the kernel's page_pool.
    • Enhanced performance by adding the following modifications in XDP:
      • Added XDP multi-buffer support to the default RQ type (Striding RQ)
      • Added support for XDP multi-buffer redirect-in
      • Allowed non-linear single-segment frames in XDP TX MPWQE
    • Increased the maximum outstanding DC atomic reads to 32 to enable the driver to handle reads larger than 8K. Now log_max_ra_{res/req}_dc is exposed in DV API, enabling the user to see both RC and DC values.
    • Added support for Linux kernel DPLL subsystem as a mechanism for working with clock signals in NVIDIA's proprietary synchronous ethernet protocol daemon. This new mechanism enables the use of both VFs and SFs, and is supported starting from korg6.8.
    • Limited the number of MADs received on the wire that are queued in the kernel as they are waiting for the user-space application to 200k per umad file. By that, preventing malicious or faulty behavior of flooding a node with MADs and exhausting its memory.
    • Added the option to expose offloaded FDB state (flags, counters, etc.) via debugfs for debugging purposes.

    $ cat mlx5/0000\:08\:00.0/esw/bridge/bridge1/fdb

    DEV MAC VLAN PACKETS BYTES LASTUSE FLAGS

    enp8s0f0_1 e4:0a:05:08:00:06 2 2 204 4295567112 0x0

    enp8s0f0_0 e4:0a:05:08:00:03 2 3 278 4295567112 0x0

    • Added support for over KORG 6.7 read frequency_diff.
    ]]>         The following issues have been fixed in version 24.04-0.6.6.1:

    • An issue related to the comparison process between the SW steering and FW steering modes to avoid kernel crashes incidences.
    • The tc_wrap tool did not work properly when VLAN was configured as the tool incorrectly handled the library function return value.
    • An IPSec issue that resulted in Crypto offload getting disabled.
    • Memory corruption issue when running XDP traffic.
    • IFA packets were sent from the incorrect port on VF LAG.
    • An issue that caused a deadlock in the flow of disabling the LAG when changing eswitch mode from switchdev to legacy when a LAG bond existed on the machine.
    • In systems with 64k page size, applications opening a substantial amount of RDMA resources such as UARs, QPs, and CQs might encounter errors during the creation of these resources due to limitations in PCI BAR size.
    • PFC configuration was reset when updating the cable length via mlnx_qos.
    ]]>         The following new features and changes have been included in version 24.04-0.6.6.1:

    • Added support for Live Migration. Live migration refers to the process of moving a guest virtual machine (VM) running on one physical host to another host without disrupting normal operations or causing any downtime or other adverse effects for the end user.
    • Added support for multicast control path packet snooping (IGMP/MLD) and offload of MDB notifications in order to replicate multicast traffic to multiple destinations in the hardware.
    • Increased the netdev maximum channels from 128 to 256 for systems with a high number of cores.
    • Enhanced performance by removing the internal Rx path from the internal page cache, thus allowing the driver to always use the kernel's page_pool.
    • Enhanced performance by adding the following modifications in XDP:
      • Added XDP multi-buffer support to the default RQ type (Striding RQ)
      • Added support for XDP multi-buffer redirect-in
      • Allowed non-linear single-segment frames in XDP TX MPWQE
    • Increased the maximum outstanding DC atomic reads to 32 to enable the driver to handle reads larger than 8K. Now log_max_ra_{res/req}_dc is exposed in DV API, enabling the user to see both RC and DC values.
    • Added support for Linux kernel DPLL subsystem as a mechanism for working with clock signals in NVIDIA's proprietary synchronous ethernet protocol daemon. This new mechanism enables the use of both VFs and SFs, and is supported starting from korg6.8.
    • Limited the number of MADs received on the wire that are queued in the kernel as they are waiting for the user-space application to 200k per umad file. By that, preventing malicious or faulty behavior of flooding a node with MADs and exhausting its memory.
    • Added the option to expose offloaded FDB state (flags, counters, etc.) via debugfs for debugging purposes.

    $ cat mlx5/0000\:08\:00.0/esw/bridge/bridge1/fdb

    DEV MAC VLAN PACKETS BYTES LASTUSE FLAGS

    enp8s0f0_1 e4:0a:05:08:00:06 2 2 204 4295567112 0x0

    enp8s0f0_0 e4:0a:05:08:00:03 2 3 278 4295567112 0x0

    • Added support for over KORG 6.7 read frequency_diff.
    ]]>         The following issues have been fixed in version 24.04-0.6.6.1:

    • An issue related to the comparison process between the SW steering and FW steering modes to avoid kernel crashes incidences.
    • The tc_wrap tool did not work properly when VLAN was configured as the tool incorrectly handled the library function return value.
    • An IPSec issue that resulted in Crypto offload getting disabled.
    • Memory corruption issue when running XDP traffic.
    • IFA packets were sent from the incorrect port on VF LAG.
    • An issue that caused a deadlock in the flow of disabling the LAG when changing eswitch mode from switchdev to legacy when a LAG bond existed on the machine.
    • In systems with 64k page size, applications opening a substantial amount of RDMA resources such as UARs, QPs, and CQs might encounter errors during the creation of these resources due to limitations in PCI BAR size.
    • PFC configuration was reset when updating the cable length via mlnx_qos.
    ]]>         Updated to version 1.0.0.1

    ]]>         Updated to version 1.0.0.1

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.42.1000:

    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 20.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Incorrect MPLS packets discards flow when the GLOBAL pause capability was disabled.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.41.1000:

    • Added support for steering match on packet l4_type through FTG/FTE.
    ]]>         No fixes are included in version 20.41.1000.

    ]]>         This product added support to new Gen11 and Gen12 servers.

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Mitigates the potential drive FW halt issue.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of an MR controller.

    Addressed an issue where Windows Server 2025 HLK TPM2.0 UEFI Preboot Interface test failed on XL450 Gen10.

    Addressed an issue where WHLK HSTI test failed.

    Addressed an issue where the "Physical Drive missing" message appears twice in POST when a drive was removed and rebooted with incorrect severity in IML.

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options and navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Addressed an issue where system may encounter an RSOD while updating the SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes the mitigation for security vulnerabilities CVE-2023-45229, CVE-2022-36763, CVE-2022-36764, CVE-2021-38578, CVE-2023-5678 and CVE-2024-0727. The security vulnerabilities are documented in the CVE report site. They are not unique to HPE servers. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added value "C6 without C1E" in System Configuration (RBSU) option "Power Management/Advanced Power Options menu/Minimum Processor Idle Power Core C-State". When selected, the Minimum Processor Idle Power Core C-State is C6 with C1E disabled. This setting has the following Redfish property: /redfish/v1/systems/1/bios/MinProcIdlePower

    Known Issues:

    None]]>         The following enhancement has been added in this version:

    • Added support of RHEL 8.7

    • Added support of RHEL 9.1 

    • Added support of SLES15 SP4

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 7.8 

    • Added support of Rhel 8.2 

    • Added support of SLES15 SP2

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         This component contains now available with the new HPE code signing key.

    ]]>         This product now supports Red Hat Enterprise Linux 9 update 4.

    ]]>
  • This firmware version fixes a bug with the unmap command that may cause a drive hang
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Fix for BSOD issue due to SRIS misdetection and FW Commit command via PCIe VDM (MCTP OVER PCIe) timed out.
    • ]]>
  • Fix for BSOD issue due to SRIS misdetection and FW Commit command via PCIe VDM (MCTP OVER PCIe) timed out.
    • ]]>         Updated some Japanese translation.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of an MR controller.

    Addressed an issue that Battery Failure IML message log may be incorrectly logged for MR Controller with Smart Storage Battery.

    Addressed an issue where system failed to boot with selected NVMe HDD by setting One-Time Boot Option in ILO Web.

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None

    ]]>         Updated some Japanese translation.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of an MR controller.

    Addressed an issue that Battery Failure IML message log may be incorrectly logged for MR Controller with Smart Storage Battery.

    Addressed an issue where system failed to boot with selected NVMe HDD by setting One-Time Boot Option in ILO Web.

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None

    ]]>          

    Updated to version 14.4.329.9

    ]]>          

    Updated to version 14.4.329.9

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Improvement in mixed READ/WRITE performance, which was causing a field issue at an HPE customer - Improve random mix performance in TL=2048k and 512k
    • ]]>
  • Improvement in mixed READ/WRITE performance, which was causing a field issue at an HPE customer - Improve random mix performance in TL=2048k and 512k
    • ]]>
  • It has fix code for V6 read disturb and other issues.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us
    • ]]>         It has fix code for V6 read disturb and other issues

    ]]>         * An error was found in the queue fullhandling process that results in the FUA bit not getting properly set, which could lead to the drive self-initiated reset

    * The FW fix is to resolve the handling of FUA bit during the queue full handling process has been implemented

    ]]>         Added new Microsoft Option Rom UEFI CA 2023 secure boot key.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where certain Server Configuration Lock settings cannot be modified by Redfish interface.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.E for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • It has fix code for V6 Read disturb issue and other issue.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us
    • ]]>         It has fix code for V6 Read disturb issue and other issue

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.3.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.3 guidance.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.3 guidance.

    Known Issues:

    None

    ]]>         TBD

    ]]>         This product enhanced the compatibility with VMware firmware component 1.34.0.

    ]]>         2024 Sep MSB

    ]]>
  • Added command to support the erasure of logs and events stored in the controller.
  • Added command to support spare spin down policy setting if the feature is supported.
    • ]]>
  • Fixed issue of ADU report generation when using SSADUESXI within the VMWare ESXi system.
  • Fixed the display issue with physical drives in the enclosure under the multipath configuration.
  • Fixed issue where the tool allowed the Heal array operation on RMSED secured arrays when KMS is not active.
  • Fixed issue where the tools would allow users to attempt Change Drive Type operations with 512/512e drives for 4Kn logical volumes.
  • Fixed issue where users specified an incorrect encryption mode for a logical volume that did not match the existing mode on the array.
  • Fixed issue where the operation to revert the SEDs to Original Factory State (OFS) was not being blocked when KMS is not available in remote SED mode.
  • Fixed the volume creation issue when users specify the 'volatileencryptionkey' option while the Controller setting does not support it.
  • Fixed issue of error message occurring when using the 'create type=arrayR0' command with 'drives=' and 'drivetype=' options.
  • Fixed installation issue encountered when attempting to downgrade SSACLI from versions 6.30.X.X to 6.15.X.X or 6.20.X.X.
    • ]]>
  • Updated supported environments
    • ]]>
  • Updated SBOM requirement
    • ]]>         TBD

    ]]>
  • This product addresses a problem that might cause a BSOD when trying to reboot the system from operating Windows systems due to NIC internal software mutex problem.
  • This product addresses an issue where a random missing DHCP IP address occurs when the iLO shared NIC port is used, due to NIC internal software mutex problem.
  • This product addresses an issue that might cause the POST to get stuck due to NIC internal software mutex problem.
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>         This component contains now available with the new HPE code signing key.

    ]]>         This product enhanced the compatibility with drivers.

    ]]>
  • Corrective actions to fix potential background media scan issue.
    • ]]>
  • Corrective actions to fix potential background media scan issue.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>         TBD

    ]]>
  • This product enhances to support RoCE loopback traffic with TF enable.
  • This product enhances appropriate log messages when roce traffic is started on a lossy queue.
  • This product enhances to increase RoCE logger buffer size to 32MB.
    • ]]>
  • This product fixes the memory allocator warning caused by RoCE driver.
  • This product fixes mutex dead lock issue when loading/unloading the bonding and bnxt_re drivers.
  • This product fixes incorrect message observed after pci removal-rescan when LAG is created.
    • ]]>         7.28 GCA/Production Drop

    ]]>         New release for version 007.2613.0000.0000.

    ]]>         This is the first driver for Windows 2025 . The driver version is 9.4.10.20.

    ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00142315en_us
    • ]]>
  • Updated driver
  • Added support for Windows Server 2025
  • Updated supported platforms
    • ]]>
  • Driver update
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         Initial Build

    ]]>         Initial build

    ]]>
  • Support for PIN-based iLO5 onboarding into COM instead of PCID.
    • ]]>
  • Fixed an issue where HPE iLO RIBCL queries generated incorrect CAPACITY VALUE responses.
  • Fixed an issue where fetching the email details of an LDAP user where DistinguishedName containing special characters were causing the two-factor authentication process to fail.
  • Fixed an issue where the hpsetup/secureflash engine reports the HPE iLO 5 firmware update as a failure.
  • Fixed an issue where Xilinx XtremeScale X2522-25G cards drop from HPE iLO health monitoring.
  • Fixed the cpqHoMIBStatusArray status issue that did not get updated with proper details when a drive attached to HPE Smart Array P408i-a SR controller failed or degraded.
  • Fixed an incorrect AMS status (Not Available) that appeared on the HPE iLO interfaces while operating system indicated AMS status as running.

    •  

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixing Maximum Temperature Reporting in system log.
    • ]]>         This product fixes warning message: index 1 is out of range.

    ]]>
  • This product now adds more trace events related to SFP module IOCTLs.
  • This product now supports Red Hat Enterprise Linux 8 update 10.
    • ]]>
  • This product fixes an issue where the driver will honor user IRQ affinity settings.
  • This product fixes an issue where the VF may be used uninitialized in the function warning.
    • ]]>         SR 2.9.0/SR 3.4.0 RC

    ]]>
  • Made changes to enhance the testability of the driver. Changes do not impact end customers.
    • ]]>          

    Updated to version 14.4.329.9

    ]]>          

    Updated to version 14.4.329.9

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Initial version for UBM FWPKG.
  • Support RHEL9 and ESXi8.0
    • ]]>
  • Initial version for UBM FWPKG.
  • Support RHEL9 and ESXi8.0
    • ]]>
  • This product fixed an issue that caused the MlxNdPerf tool to get stuck when sending less packets than the QP depth while using the -UseEvents parameter.
  • This product fixed an issue that caused the MlxNdPerf tool to send more packets than the "-Iterations" parameter required when the number of iterations was less than the QP depth.
  • This product fixed an issue which allowed the Schedule-Queue to be attached to the vPort when it exceeded the MaxNumSqInputs value set.
  • This product fixed an issue which resulted in BSOD when receiving LSO packets with L4 frag separated from L2/3.
    • ]]>         This product fixed BSOD event not being detected when collecting mstdump on BUGCHECK while the device was already down.

    ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Added support for Microsoft Server Windows 2022.
    • ]]>         The following new features and changes have been included in version 24.04-0.6.6.1:

    • Added support for Live Migration. Live migration refers to the process of moving a guest virtual machine (VM) running on one physical host to another host without disrupting normal operations or causing any downtime or other adverse effects for the end user.
    • Added support for multicast control path packet snooping (IGMP/MLD) and offload of MDB notifications in order to replicate multicast traffic to multiple destinations in the hardware.
    • Increased the netdev maximum channels from 128 to 256 for systems with a high number of cores.
    • Enhanced performance by removing the internal Rx path from the internal page cache, thus allowing the driver to always use the kernel's page_pool.
    • Enhanced performance by adding the following modifications in XDP:
      • Added XDP multi-buffer support to the default RQ type (Striding RQ)
      • Added support for XDP multi-buffer redirect-in
      • Allowed non-linear single-segment frames in XDP TX MPWQE
    • Increased the maximum outstanding DC atomic reads to 32 to enable the driver to handle reads larger than 8K. Now log_max_ra_{res/req}_dc is exposed in DV API, enabling the user to see both RC and DC values.
    • Added support for Linux kernel DPLL subsystem as a mechanism for working with clock signals in NVIDIA's proprietary synchronous ethernet protocol daemon. This new mechanism enables the use of both VFs and SFs, and is supported starting from korg6.8.
    • Limited the number of MADs received on the wire that are queued in the kernel as they are waiting for the user-space application to 200k per umad file. By that, preventing malicious or faulty behavior of flooding a node with MADs and exhausting its memory.
    • Added the option to expose offloaded FDB state (flags, counters, etc.) via debugfs for debugging purposes.

    $ cat mlx5/0000\:08\:00.0/esw/bridge/bridge1/fdb

    DEV MAC VLAN PACKETS BYTES LASTUSE FLAGS

    enp8s0f0_1 e4:0a:05:08:00:06 2 2 204 4295567112 0x0

    enp8s0f0_0 e4:0a:05:08:00:03 2 3 278 4295567112 0x0

    • Added support for over KORG 6.7 read frequency_diff.
    ]]>         The following issues have been fixed in version 24.04-0.6.6.1:

    • An issue related to the comparison process between the SW steering and FW steering modes to avoid kernel crashes incidences.
    • The tc_wrap tool did not work properly when VLAN was configured as the tool incorrectly handled the library function return value.
    • An IPSec issue that resulted in Crypto offload getting disabled.
    • Memory corruption issue when running XDP traffic.
    • IFA packets were sent from the incorrect port on VF LAG.
    • An issue that caused a deadlock in the flow of disabling the LAG when changing eswitch mode from switchdev to legacy when a LAG bond existed on the machine.
    • In systems with 64k page size, applications opening a substantial amount of RDMA resources such as UARs, QPs, and CQs might encounter errors during the creation of these resources due to limitations in PCI BAR size.
    • PFC configuration was reset when updating the cable length via mlnx_qos.
    ]]>         The following new features and changes have been included in version 24.04-0.6.6.1:

    • Added support for Live Migration. Live migration refers to the process of moving a guest virtual machine (VM) running on one physical host to another host without disrupting normal operations or causing any downtime or other adverse effects for the end user.
    • Added support for multicast control path packet snooping (IGMP/MLD) and offload of MDB notifications in order to replicate multicast traffic to multiple destinations in the hardware.
    • Increased the netdev maximum channels from 128 to 256 for systems with a high number of cores.
    • Enhanced performance by removing the internal Rx path from the internal page cache, thus allowing the driver to always use the kernel's page_pool.
    • Enhanced performance by adding the following modifications in XDP:
      • Added XDP multi-buffer support to the default RQ type (Striding RQ)
      • Added support for XDP multi-buffer redirect-in
      • Allowed non-linear single-segment frames in XDP TX MPWQE
    • Increased the maximum outstanding DC atomic reads to 32 to enable the driver to handle reads larger than 8K. Now log_max_ra_{res/req}_dc is exposed in DV API, enabling the user to see both RC and DC values.
    • Added support for Linux kernel DPLL subsystem as a mechanism for working with clock signals in NVIDIA's proprietary synchronous ethernet protocol daemon. This new mechanism enables the use of both VFs and SFs, and is supported starting from korg6.8.
    • Limited the number of MADs received on the wire that are queued in the kernel as they are waiting for the user-space application to 200k per umad file. By that, preventing malicious or faulty behavior of flooding a node with MADs and exhausting its memory.
    • Added the option to expose offloaded FDB state (flags, counters, etc.) via debugfs for debugging purposes.

    $ cat mlx5/0000\:08\:00.0/esw/bridge/bridge1/fdb

    DEV MAC VLAN PACKETS BYTES LASTUSE FLAGS

    enp8s0f0_1 e4:0a:05:08:00:06 2 2 204 4295567112 0x0

    enp8s0f0_0 e4:0a:05:08:00:03 2 3 278 4295567112 0x0

    • Added support for over KORG 6.7 read frequency_diff.
    ]]>         The following issues have been fixed in version 24.04-0.6.6.1:

    • An issue related to the comparison process between the SW steering and FW steering modes to avoid kernel crashes incidences.
    • The tc_wrap tool did not work properly when VLAN was configured as the tool incorrectly handled the library function return value.
    • An IPSec issue that resulted in Crypto offload getting disabled.
    • Memory corruption issue when running XDP traffic.
    • IFA packets were sent from the incorrect port on VF LAG.
    • An issue that caused a deadlock in the flow of disabling the LAG when changing eswitch mode from switchdev to legacy when a LAG bond existed on the machine.
    • In systems with 64k page size, applications opening a substantial amount of RDMA resources such as UARs, QPs, and CQs might encounter errors during the creation of these resources due to limitations in PCI BAR size.
    • PFC configuration was reset when updating the cable length via mlnx_qos.
    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>         TBD

    ]]>
  • This product enhances RoCE command size trimming.
  • This product enhances driver logging to capture non-supported dual-rate transceiver async errors.
    • ]]>         This product addresses the problem to enabling NPAR+ SRIOV (more than supported VFs through Driver) causes system failure.

    ]]>
  • Improves data integrity. 
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide a minor performance improvement.
    • ]]>
  • Improves data integrity. 
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide a minor performance improvement.
    • ]]>         Updated to version 14.4.329.3

     

    ]]>         Updated to version 14.4.329.3

     

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         Updated to driver version 24.4.50000.0

    ]]>         Updated to driver version 23.7.50000.0

    ]]>         Fixed behavior where installation was not complete and "cannot load dll" message was presented during installation.

    ]]>         Updated to Driver version 14.2.673.47

    ]]>         Fixed the following :

    The target sends ADISC right after the initiator sends a PRLI. So, the lpfc driver was changing the ndlp state from PRLI to UNMMAPED. This was halting the discovery of the target port and putting the ndlp in an illegal state.

    ]]>         Updated to Driver version 14.2.673.36

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>         The following fixes were incorporated in this version:

    • Code optimization to save memory repo.

    • TLB exception seen while doing esp reset when expander reset was in progress.

    • Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

    • Added whole new Delta PS-pmbus code , Updated the ESP version number.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    New features and changes included in version 26.42.1000:

    • Prevented HCA_CAP from allowing rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Removed the logical port rate limiter to prevent the internal loopback traffic from exceeding the physical port network link speed when using the esw scheduling feature.
    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 26.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • The "time_since_last_clear" counter showed wrong indications.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    New features and changes included in version 26.41.1000:

    • Implemented Deterministic Random Bit Generator (DRBG) algorithm on top of firmware TRNG (the source for raw data input) in accordance with NIST SP800-90A.
    • Added support for vDPA virtual queue state change from suspend to ready, and discrete mkey for descriptor. vDPA Live Migration uses these two new capabilities to reduce downtime since vq can go back to ready state for traffic and descriptor-only-mkey can help reduce mkey mapping time.
    • Added a new NVConfig option to copy AR bit from the BTH header to the DHCP header.
    • Added the option to provide field's offset and length in Steering add_action option.
    • Added support for steering match on packet l4_type through FTG/FTE.
    • Extended Flex Parser merge mechanism to support hardware capabilities.
    • Enabled the option to disable the native parser when the parse graph node is configured with the same conditions.
    • Added support for father/son headers parsing.
    • Added support for tunnel_offload in LRO.
    ]]>         The following issues have been fixed in version 26.41.1000:

    • Traffic failure occurred when modifying the VIRTIO_NET_F_MRG_RXBUF bit for the VDPA device during traffic.
    • The second mkey index returned even if it was not set in the creation of the virtio q when querying virtio q object.
    • Traffic loss occurred after performing Live Migration with virtio vq "frozen-ready" feature.

    Note: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.

    ]]>
  • Optimize sensor reporting to improve failure rate - AFR (Annual Failure Rate) metrics
    • ]]>
  • Optimize sensor reporting to improve failure rate - AFR (Annual Failure Rate) metrics
    • ]]>         TBD

    ]]>
  • This product addressed an issue where Network Interface initialization failure under OS or Firmware rollback may be seen with LLDP enabled.
  • This product addressed an issue where RDE PermanentMACAddress changes simultaneously when send PATCH request for MACAddress property with Firmware 4.30.
  • This product addressed an issue where data is interchanged of Port 1 and Port 4 ​when ​running ​a ​Redfish GET ​Operation ​under ​the NetworkAdapter, ​NetworkDeviceFunctions and Port ​Schema ​with ​"Metrics" ​properties.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of an MR controller.

    Addressed an issue that Battery Failure IML message log may be incorrectly logged for MR Controller with Smart Storage Battery.

    Addressed an issue where system failed to boot with selected NVMe HDD by setting One-Time Boot Option in ILO Web.

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This revision of the System ROM includes the mitigation for security vulnerabilities CVE-2023-45229, CVE-2023-5678, and CVE-2021-38578. The security vulnerabilities are documented in the CVE report site. They are not unique to HPE servers. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options, navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Removed the value of "Not Specified" in System Configuration (RBSU) option "Server Security/Trusted Platform Module Options/Current TPM 2.0 Active PCRs" and set the default value as "SHA1 and SHA256".

    Known Issues:

    None]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         Important Notes:

    Ver. 0.2.3.0(C) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 0.2.3.0(B) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Added support for Microsoft Server Windows 2022.
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>
  • This firmware provides bug fixes for the P5620/P5520.
    • ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.42.1000:

    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 20.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Incorrect MPLS packets discards flow when the GLOBAL pause capability was disabled.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.41.1000:

    • Added support for steering match on packet l4_type through FTG/FTE.
    ]]>         No fixes are included in version 20.41.1000.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.3 guidance.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.1 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.1 guidance.

    Known Issues:

    None

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • This firmware revision improves data integrity and reliability by optimizing adjacent track refresh parameters and management of emergency power loss table structure.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in emergency power loss events.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide some minor performance improvements.
    • ]]>
  • This firmware revision improves data integrity and reliability by optimizing adjacent track refresh parameters and management of emergency power loss table structure.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in emergency power loss events.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide some minor performance improvements.
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Columbiaville 4.4.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Addresses a hot plug reporting concern
  • Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration
  • Remove Background Media Scan (BMS) with Super parity and Directed Offline Scan (DOS)
    • ]]>
  • Addresses a hot plug reporting concern
  • Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>         Important Notes:

    Ver. 06.00.03.604(B) contains updates to the firmware packaging and is functionally equivalent to ver. 06.00.03.604. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 06.00.03.604.

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>         This product carries SBOM signatures.

    ]]>         This product carries SBOM signatures.

    ]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>
  • Fix issue that for commands that have reported errors to the host, change FW so that new commands are registerd after FW performs abort process for the corresponding command in the command management table
    • ]]>         Added code signing project SDR_RPM_2024

    ]]>         Support FIPS mode.

    ]]>
  • Updated support environments
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Corrective actions to fix potential background media scan issue.
    • ]]>
  • Corrective actions to fix potential background media scan issue.
    • ]]>         TBD

    ]]>
  • This product enhances to support for more Linux distributions.
  • This product enhances to implement compact code to handle the kernel DMA API for tg3.
    • ]]>         Initial version.

    ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         This product now supports SUSE Linux Enterprise Server 15 SP6.

    ]]>         This product fixes warning message: index 1 is out of range.

    ]]>         This product now adds more trace events related to SFP module IOCTLs.

    ]]>
  • This product fixes an issue where the driver will honor user IRQ affinity settings.
  • This product fixes an issue where the VF may be used uninitialized in the function warning.
    • ]]>         Introduced support for iLO 6.

    ]]>         Introduced support for iLO 6.

    ]]>         Important Notes:

    Ver. 05.01.04.913(C) contains updates to the firmware packaging and is functionally equivalent to ver. 05.01.04.913. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 05.01.04.913.

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with Intel IPU.2023.3 guidance.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with Intel IPU.2023.3 guidance.

    Known Issues:

    None]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Improve the FW about data mismatch after SPL issued.
    • ]]>
  • Improve the FW about data mismatch after SPL issued.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>
  • Added support for Microsoft Windows Server 2025
    • ]]>
  • Added support for Microsoft Windows Server 2022
    • ]]>         Driver version 5.4.83.1

     

    ]]>         Driver version 5.4.82.1

     Fixed the DHL customer issue ID SIE276639.

    ]]>          Fixed the DHL customer issue ID SIE276639.

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.329.10 14.4.329.10 14.4.329.9 14.4.290.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.329.10 14.4.329.10 14.4.329.9 14.4.290.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.2.589.21

    14.2.589.21

    14.2.589.16

    14.2.566.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.2.589.21

    14.2.589.21

    14.2.589.16

    14.2.566.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.21

    14.2.589.21

    14.2.589.16

    14.2.566.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.21

    14.2.589.21

    14.2.589.16

    14.2.566.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.19

    14.2.589.19

    14.2.589.16

    14.2.566.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.19

    14.2.589.19

    14.2.589.16

    14.2.566.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.2.589.19 14.2.589.19 14.2.589.16 14.2.566.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.2.589.19 14.2.589.19 14.2.589.16 14.2.566.0
    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with Intel IPU.2023.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.1 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.1 guidance.

    Known Issues:

    None

    ]]>
  • Support non-hotplug backplane configuration which is used in HPE ProLiant MicroServer Gen11
    • All the Redfish Drive resources will be listed directly under storage with "%L<StorageId>/Drives/{DriveId}¨
    • Box field will not be displayed anywhere as there is no Box in this case
  • LTO support
    • Please check Tape Compatibility matrix on SPoCK (www.hpe.com/storage/TapeCompatibilityMatrix)
    • On Linux, using IO sizes larger than 256KB may result in an error
    • Redfish support is not available for Tape drives
    • The Tape drive appears as a 0KB drive in MRSA and storcli
    • Note: LTO does not support OBSE. OBSE will show fail result on the server with LTO installed.
  • Change SBR (secondary bus reset) handle method. With this change, the boot up time is shorten for the vm which has passthrough MR controller configured
  • Firmware logging (snapdump) improvement
    • Include protocol layer logs from initial discovery at start of day to address Drive lost across reboots
    • Additional snapdumps are generated if drive failure conditions are detected
    • Use storcli /cx set captureSodPlLogs=<on|off> to enable/disable the function
    • ]]>
  • Fix a00138425en_us: HPE MR Gen10 Plus/Gen11 Controllers - The Health Status Is Erroneously Displayed As "OK" In The Server Health Tab After a Drive or Storage Volume is in a Failed State.
  • Fix an issue that PLDM firmware update for controller and downstream device may failed due to checksum error.
  • Fix an issue that ControllerPreviousError (0x7f833119) event may be logged in IML when there is large capacity NVMe drive installed and graceful shutdown.
  • Fix an issue that controller may crash during firmware self-activation and cause iLO to show firmware update fail.
  • Fix a rare issue that ControllerPreviousError (0x7f833119) event may be logged in IML when server reboot and there is firmware log migration.
  • Fix a rare issue that imported secured drives in a span (parity group) became unsecured and data is not recovered. The issue happens only when all drives in a span are removed, re-insert and do import operation.
  • Fix an issue that controller reset may occur and not be recovered when adding drives to do transformation and get logical drive information from storcli, MRSA or Redfish client simultaneously.
  • Fix a rare issue that data mis compare may happen when simultaneously write and read data for many times before the written data is flushed to physical drive.
  • Fix a rare issue that drive might be marked as Unconfigured Bad when hot-insert.
  • Fix a rare issue that controller may assert and ControllerPreviousError (0x7f833119) event is logged in IML when there is IO running and reset happens on JBOD drive.
  • Fix a rare issue that drive may be marked as Unconfigured Bad if there is link reset happens.
  • Fix an issue that Read(32) or Write(32) CDB sent to NVMe drive reported incorrect additional sense code.
  • Fix a rare issue that controller may stop responding when there is IO running and plugout drives to make volume offline.
  • Fix an issue that drive removal events are delayed when NVMe drive hot-insert and hotremove are performed when mixing SAS/SATA and NVMe drives.
  • Fix a rare issue that controller may assert if UBM backplane firmware update failed.
  • Fix an assertion failure that may happens when running IO and task management. In this case, IO's marked for abort are getting completed before the firmware really get a chance to abort them.
  • Fix an issue that Redfish client is allowed to create different RAID level on the existing span (parity group) configuration which is unsupported.
  • Fix an issue that logical drive creation with "0" capacity creating full drive capacity in Redfish client. It is not allowed to use CapacityBytes less than 1GB.
    • ]]>
  • Support non-hotplug backplane configuration which is used in HPE ProLiant MicroServer Gen11
    • All the Redfish Drive resources will be listed directly under storage with "%L<StorageId>/Drives/{DriveId}¨
    • Box field will not be displayed anywhere as there is no Box in this case
  • LTO support
    • Please check Tape Compatibility matrix on SPoCK (www.hpe.com/storage/TapeCompatibilityMatrix)
    • On Linux, using IO sizes larger than 256KB may result in an error
    • Redfish support is not available for Tape drives
    • The Tape drive appears as a 0KB drive in MRSA and storcli
    • Note: LTO does not support OBSE. OBSE will show fail result on the server with LTO installed.
  • Change SBR (secondary bus reset) handle method. With this change, the boot up time is shorten for the vm which has passthrough MR controller configured
  • Firmware logging (snapdump) improvement
    • Include protocol layer logs from initial discovery at start of day to address Drive lost across reboots
    • Additional snapdumps are generated if drive failure conditions are detected
    • Use storcli /cx set captureSodPlLogs=<on|off> to enable/disable the function
    • ]]>
  • Fix a00138425en_us: HPE MR Gen10 Plus/Gen11 Controllers - The Health Status Is Erroneously Displayed As "OK" In The Server Health Tab After a Drive or Storage Volume is in a Failed State.
  • Fix an issue that PLDM firmware update for controller and downstream device may failed due to checksum error.
  • Fix an issue that ControllerPreviousError (0x7f833119) event may be logged in IML when there is large capacity NVMe drive installed and graceful shutdown.
  • Fix an issue that controller may crash during firmware self-activation and cause iLO to show firmware update fail.
  • Fix a rare issue that ControllerPreviousError (0x7f833119) event may be logged in IML when server reboot and there is firmware log migration.
  • Fix a rare issue that imported secured drives in a span (parity group) became unsecured and data is not recovered. The issue happens only when all drives in a span are removed, re-insert and do import operation.
  • Fix an issue that controller reset may occur and not be recovered when adding drives to do transformation and get logical drive information from storcli, MRSA or Redfish client simultaneously.
  • Fix a rare issue that data mis compare may happen when simultaneously write and read data for many times before the written data is flushed to physical drive.
  • Fix a rare issue that drive might be marked as Unconfigured Bad when hot-insert.
  • Fix a rare issue that drive may be marked as Unconfigured Bad if there is link reset happens.
  • Fix an issue that Read(32) or Write(32) CDB sent to NVMe drive reported incorrect additional sense code.
  • Fix a rare issue that controller may stop responding when there is IO running and plugout drives to make volume offline.
  • Fix an issue that drive removal events are delayed when NVMe drive hot-insert and hotremove are performed when mixing SAS/SATA and NVMe drives.
  • Fix a rare issue that controller may assert if UBM backplane firmware update failed.
  • Fix an assertion failure that may happens when running IO and task management. In this case, IO's marked for abort are getting completed before the firmware really get a chance to abort them.
  • Fix an issue that Redfish client is allowed to create different RAID level on the existing span (parity group) configuration which is unsupported.
  • Fix an issue that logical drive creation with "0" capacity creating full drive capacity in Redfish client. It is not allowed to use CapacityBytes less than 1GB.
    • ]]>         TBD

    ]]>
  • This product enhances to enable log traces to be added to coredump when dump flag is set.
  • This product enhances to support niccli (Broadcom debug tool) correct version.
  • This product addresses RTNL (Routing Netlink) lock contention issues during firmware reset.
  • This product enhances kTLS（Kernel Transport Layer Security）.
  • This product addresses an issue where an error is observed after unloading the bonding driver and recreating LAG.
  • This product enhances to increase warnings for lldptool being disabled.
  • This product enhances to ethtool-m module operations.
  • This product enhances to handle firmware reset with hardware LAG.
  • This product enhances NIC flow resource cleanup.
  • This product enhances to add the config option to enable/disable the driver debug dump feature.
  • This product enhances to add host logging traces as driver coredump.
  • This product enhances to add hardware LAG support to the bnxt_en L2 driver.
  • This product enhances to keep L2 driver's MSIX mapping persistent.
  • This product enhances to improve ethtool-l pre-set max combined value.
    • ]]>
  • This product fixes the GID table length.
  • This product fixes the computation of current lossless queues.
  • This product fixes incorrect configuration of tsa values.
  • This product fixes QoS info that is not being updated on 2nd PF of a hardware LAG.
  • This product addresses issues related to VF statistics.
  • This product addresses issues related to deadlocks occurring during reset and driver unloading.
  • This product addresses issues where enabling or disabling Truflow was causing resources to be not freed.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4 and Columbiaville 4.4.

    ]]>         This product added support to new Gen12 servers.

    ]]>         This product enhanced the compatibility with firmware of Columbiaville 4.5.

    ]]>
  • This product correct an issue which seeing warning message Event ID : 101 with ICEA module.
  • This product correct an issue which E810 physical adapter does not display RDMA counters.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>         Firmware for the following devices has been updated to 14.32.1900:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.4030:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.
     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 14.32.1010:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.3502:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

     

    New features and changes included in firmware version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.
       

    New features and changes included in firmware version 16.35.3502:

    • Modified the TCP IPv4 flows so that the steering TIR rx_hash_symmetric field is now valid only when both the SRC and DST fields are not set to zero.
    ]]>         The following issues have been fixed in firmware version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
       

    No fixes are included in firmware version 16.35.3502.

    ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail WS2025 HSTI test.

    Addressed an issue where the PCIe link speed of Microchip AROC Gen10 SR controller (AROC controller) may downgrade.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail WS2025 HSTI test.

    Addressed an issue where the PCIe link speed of Microchip AROC Gen10 SR controller (AROC controller) may downgrade.

    Known Issues:

    None]]>         Firmware for the following device has been updated to 14.32.1900:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

    ]]>         No fixes have been included in firmware version 14.32.1900.

    ]]>         Firmware for the following device has been updated to 14.32.1010:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    New features and changes included in version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.
    ]]>         The following changes have been made in sub-version 1.0.3(A):

    • Product rebuilt to have the new SHA 384 signature.

    The following issues have been fixed in version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of an MR controller.

    Addressed an issue that Battery Failure IML message log may be incorrectly logged for MR Controller with Smart Storage Battery.

    Addressed an issue where system failed to boot with selected NVMe HDD by setting One-Time Boot Option in ILO Web.

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This revision of the System ROM includes the mitigation for security vulnerabilities CVE-2023-45229, CVE-2023-5678, and CVE-2021-38578. The security vulnerabilities are documented in the CVE report site. They are not unique to HPE servers. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options, navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Removed the value of "Not Specified" in System Configuration (RBSU) option "Server Security/Trusted Platform Module Options/Current TPM 2.0 Active PCRs" and set the default value as "SHA1 and SHA256".

    Known Issues:

    None]]>         This package supports only SuSE Linux Enterprise Server(SLES) Distros

    Modified adapter support -- added 16Gb adapter support ( 1200E,1100Q single and dual adapter support )

    ]]>         This package supports only SuSE Linux Enterprise Server(SLES) Distros

    This Component is FIPs enabled.

    ]]>         This Component is FIPs enabled.

    ]]>         Added new Microsoft Option Rom UEFI CA 2023 secure boot key.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where certain Server Configuration Lock settings cannot be modified by Redfish interface.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information. 

    ]]>         Important Notes:
    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.E for AMD 3rd Generation EPYC processors.
    This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors.
    Firmware Dependencies:
    None
    Problems Fixed:
    Fixed an issue where the iLO firmware version may show incorrectly. 
    Known Issues:
    None

    ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
     
    • ]]>
  • Added support for Microsoft Windows Server 2022.
     
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of an MR controller.

    Addressed an issue where Windows Server 2025 HLK TPM2.0 UEFI Preboot Interface test failed on XL450 Gen10.

    Addressed an issue where WHLK HSTI test failed.

    Addressed an issue where the "Physical Drive missing" message appears twice in POST when a drive was removed and rebooted with incorrect severity in IML.

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options and navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Addressed an issue where system may encounter an RSOD while updating the SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes the mitigation for security vulnerabilities CVE-2023-45229, CVE-2022-36763, CVE-2022-36764, CVE-2021-38578, CVE-2023-5678 and CVE-2024-0727. The security vulnerabilities are documented in the CVE report site. They are not unique to HPE servers. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added value "C6 without C1E" in System Configuration (RBSU) option "Power Management/Advanced Power Options menu/Minimum Processor Idle Power Core C-State". When selected, the Minimum Processor Idle Power Core C-State is C6 with C1E disabled. This setting has the following Redfish property: /redfish/v1/systems/1/bios/MinProcIdlePower

    Known Issues:

    None]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>         TBD

    ]]>
  • This product fixed interface cleanup when driver unload.
  • This product fixed failed connect with Windows GRE VPN client under VM configured.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.N for AMD 1st Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.J for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.M for AMD 1st Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options, navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of MR controller.

    Addressed an issue where duplicated "Physical Drive missing" may appear in POST and IML.

    Known Issues:

    None]]>         TBD

    ]]>
  • This product enhances to support RoCE loopback traffic with TF enable.
  • This product enhances appropriate log messages when roce traffic is started on a lossy queue.
  • This product enhances to increase RoCE logger buffer size to 32MB.
    • ]]>
  • This product fixes the memory allocator warning caused by RoCE driver.
  • This product fixes mutex dead lock issue when loading/unloading the bonding and bnxt_re drivers.
  • This product fixes incorrect message observed after pci removal-rescan when LAG is created.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>
  • Firmware maintenance release of Samsung U.3 NVMe SSD with HPK4.
    • ]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail WS2025 HSTI test.

    Addressed an issue where the PCIe link speed of Microchip AROC Gen10 SR controller (AROC controller) may downgrade.

    Known Issues:

    None]]>         TBD

    ]]>         This product correct an issue which VMs lose connectivity and system freezes with Windows Azure HCI.

    ]]>
  • Optimize thermal maximum continuous operation temperature values
    • ]]>
  • Optimize thermal maximum continuous operation temperature values
    • ]]>
  • Support non-hotplug backplane configuration which is used in HPE ProLiant MicroServer Gen11
    • All the Redfish Drive resources will be listed directly under storage with "%L<StorageId>/Drives/{DriveId}¨
    • Box field will not be displayed anywhere as there is no Box in this case
  • LTO support
    • Please check Tape Compatibility matrix on SPoCK (www.hpe.com/storage/TapeCompatibilityMatrix)
    • On Linux, using IO sizes larger than 256KB may result in an error
    • Redfish support is not available for Tape drives
    • The Tape drive appears as a 0KB drive in MRSA and storcli
    • Note: LTO does not support OBSE. OBSE will show fail result on the server with LTO installed.
  • Change SBR (secondary bus reset) handle method. With this change, the boot up time is shorten for the vm which has passthrough MR controller configured
  • Firmware logging (snapdump) improvement
    • Include protocol layer logs from initial discovery at start of day to address Drive lost across reboots
    • Additional snapdumps are generated if drive failure conditions are detected
    • Use storcli /cx set captureSodPlLogs=<on|off> to enable/disable the function
    • ]]>
  • Fix a00138425en_us: HPE MR Gen10 Plus/Gen11 Controllers - The Health Status Is Erroneously Displayed As "OK" In The Server Health Tab After a Drive or Storage Volume is in a Failed State.
  • Fix an issue that PLDM firmware update for controller and downstream device may failed due to checksum error.
  • Fix an issue that ControllerPreviousError (0x7f833119) event may be logged in IML when there is large capacity NVMe drive installed and graceful shutdown.
  • Fix an issue that controller may crash during firmware self-activation and cause iLO to show firmware update fail.
  • Fix a rare issue that ControllerPreviousError (0x7f833119) event may be logged in IML when server reboot and there is firmware log migration.
  • Fix a rare issue that imported secured drives in a span (parity group) became unsecured and data is not recovered. The issue happens only when all drives in a span are removed, re-insert and do import operation.
  • Fix an issue that controller reset may occur and not be recovered when adding drives to do transformation and get logical drive information from storcli, MRSA or Redfish client simultaneously.
  • Fix a rare issue that data mis compare may happen when simultaneously write and read data for many times before the written data is flushed to physical drive.
  • Fix a rare issue that drive might be marked as Unconfigured Bad when hot-insert.
  • Fix a rare issue that controller may assert and ControllerPreviousError (0x7f833119) event is logged in IML when there is IO running and reset happens on JBOD drive.
  • Fix a rare issue that drive may be marked as Unconfigured Bad if there is link reset happens.
  • Fix an issue that Read(32) or Write(32) CDB sent to NVMe drive reported incorrect additional sense code.
  • Fix a rare issue that controller may stop responding when there is IO running and plugout drives to make volume offline.
  • Fix an issue that drive removal events are delayed when NVMe drive hot-insert and hotremove are performed when mixing SAS/SATA and NVMe drives.
  • Fix a rare issue that controller may assert if UBM backplane firmware update failed.
  • Fix an assertion failure that may happens when running IO and task management. In this case, IO's marked for abort are getting completed before the firmware really get a chance to abort them.
  • Fix an issue that Redfish client is allowed to create different RAID level on the existing span (parity group) configuration which is unsupported.
  • Fix an issue that logical drive creation with "0" capacity creating full drive capacity in Redfish client. It is not allowed to use CapacityBytes less than 1GB.
    • ]]>
  • Support non-hotplug backplane configuration which is used in HPE ProLiant MicroServer Gen11
    • All the Redfish Drive resources will be listed directly under storage with "%L<StorageId>/Drives/{DriveId}¨
    • Box field will not be displayed anywhere as there is no Box in this case
  • LTO support
    • Please check Tape Compatibility matrix on SPoCK (www.hpe.com/storage/TapeCompatibilityMatrix)
    • On Linux, using IO sizes larger than 256KB may result in an error
    • Redfish support is not available for Tape drives
    • The Tape drive appears as a 0KB drive in MRSA and storcli
    • Note: LTO does not support OBSE. OBSE will show fail result on the server with LTO installed.
  • Change SBR (secondary bus reset) handle method. With this change, the boot up time is shorten for the vm which has passthrough MR controller configured
  • Firmware logging (snapdump) improvement
    • Include protocol layer logs from initial discovery at start of day to address Drive lost across reboots
    • Additional snapdumps are generated if drive failure conditions are detected
    • Use storcli /cx set captureSodPlLogs=<on|off> to enable/disable the function
    • ]]>
  • Fix a00138425en_us: HPE MR Gen10 Plus/Gen11 Controllers - The Health Status Is Erroneously Displayed As "OK" In The Server Health Tab After a Drive or Storage Volume is in a Failed State.
  • Fix an issue that PLDM firmware update for controller and downstream device may failed due to checksum error.
  • Fix an issue that ControllerPreviousError (0x7f833119) event may be logged in IML when there is large capacity NVMe drive installed and graceful shutdown.
  • Fix an issue that controller may crash during firmware self-activation and cause iLO to show firmware update fail.
  • Fix a rare issue that ControllerPreviousError (0x7f833119) event may be logged in IML when server reboot and there is firmware log migration.
  • Fix a rare issue that imported secured drives in a span (parity group) became unsecured and data is not recovered. The issue happens only when all drives in a span are removed, re-insert and do import operation.
  • Fix an issue that controller reset may occur and not be recovered when adding drives to do transformation and get logical drive information from storcli, MRSA or Redfish client simultaneously.
  • Fix a rare issue that data mis compare may happen when simultaneously write and read data for many times before the written data is flushed to physical drive.
  • Fix a rare issue that drive might be marked as Unconfigured Bad when hot-insert.
  • Fix a rare issue that drive may be marked as Unconfigured Bad if there is link reset happens.
  • Fix an issue that Read(32) or Write(32) CDB sent to NVMe drive reported incorrect additional sense code.
  • Fix a rare issue that controller may stop responding when there is IO running and plugout drives to make volume offline.
  • Fix an issue that drive removal events are delayed when NVMe drive hot-insert and hotremove are performed when mixing SAS/SATA and NVMe drives.
  • Fix a rare issue that controller may assert if UBM backplane firmware update failed.
  • Fix an assertion failure that may happens when running IO and task management. In this case, IO's marked for abort are getting completed before the firmware really get a chance to abort them.
  • Fix an issue that Redfish client is allowed to create different RAID level on the existing span (parity group) configuration which is unsupported.
  • Fix an issue that logical drive creation with "0" capacity creating full drive capacity in Redfish client. It is not allowed to use CapacityBytes less than 1GB.
    • ]]>         This product fixes the kernel compilation issue.

    ]]>         This product now supports Red Hat Enterprise Linux 9 update 4.

    ]]>         TBD

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.329.10 14.4.329.10 14.4.329.9 14.4.290.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.329.10 14.4.329.10 14.4.329.9 14.4.290.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.2.589.21

    14.2.589.21

    14.2.589.16

    14.2.566.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.2.589.21

    14.2.589.21

    14.2.589.16

    14.2.566.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.21

    14.2.589.21

    14.2.589.16

    14.2.566.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.21

    14.2.589.21

    14.2.589.16

    14.2.566.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.19

    14.2.589.19

    14.2.589.16

    14.2.566.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.19

    14.2.589.19

    14.2.589.16

    14.2.566.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.2.589.19 14.2.589.19 14.2.589.16 14.2.566.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.2.589.19 14.2.589.19 14.2.589.16 14.2.566.0
    ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Fix for SAS core dump issue in specific configuration.
    • ]]>
  • Updated supported environments
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of an MR controller.

    Addressed an issue that Battery Failure IML message log may be incorrectly logged for MR Controller with Smart Storage Battery.

    Addressed an issue where system failed to boot with selected NVMe HDD by setting One-Time Boot Option in ILO Web.

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This revision of the System ROM includes the mitigation for security vulnerabilities CVE-2023-45229, CVE-2023-5678, and CVE-2021-38578. The security vulnerabilities are documented in the CVE report site. They are not unique to HPE servers. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options, navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Removed the value of "Not Specified" in System Configuration (RBSU) option "Server Security/Trusted Platform Module Options/Current TPM 2.0 Active PCRs" and set the default value as "SHA1 and SHA256".

    Known Issues:

    None]]>         TBD

    ]]>
  • This product enhances to support RoCE loopback traffic with TF enable.
  • This product enhances appropriate log messages when roce traffic is started on a lossy queue.
  • This product enhances to increase RoCE logger buffer size to 32MB.
    • ]]>
  • This product fixes the memory allocator warning caused by RoCE driver.
  • This product fixes mutex dead lock issue when loading/unloading the bonding and bnxt_re drivers.
  • This product fixes incorrect message observed after pci removal-rescan when LAG is created.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • To improve the output format of the NVMe drive health log for the show command.
    • ]]>
  • Fixed an issue where failed drive details were displayed multiple times in the 'show config' output.
  • Fixed incorrect error messages displayed in SSACLI when the modify command threw an error if the 'drive' and 'drivetype' parameters coexisted.
  • Fixed an issue where the array creation command failed when executed with the drives=all and drivetype=sata_hdd parameters.
  • Fixed an issue where the drives behind the enclosures were missing in the SSACLI output.
  • Fixed an issue where users encountered a failure when launching the SSASCRIPTING tool to restore a RAID configuration with an unsupported parameter for PrebootHealthReporting.
    • ]]>
  • To improve the output format of the NVMe drive health log for the show command.
    • ]]>
  • Fixed an issue where failed drive details were displayed multiple times in the 'show config' output.
  • Fixed incorrect error messages displayed in SSACLI when the modify command threw an error if the 'drive' and 'drivetype' parameters coexisted.
  • Fixed an issue where the array creation command failed when executed with the drives=all and drivetype=sata_hdd parameters.
  • Fixed an issue where the drives behind the enclosures were missing in the SSACLI output.
  • Fixed an issue where users encountered a failure when launching the SSASCRIPTING tool to restore a RAID configuration with an unsupported parameter for PrebootHealthReporting.
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Improve the FW about data mismatch after SPL
    • ]]>
  • Improve the FW about data mismatch after SPL
    • ]]>         TBD

    ]]>
  • This product enhances to support RoCE loopback traffic with TF enable.
  • This product enhances appropriate log messages when roce traffic is started on a lossy queue.
  • This product enhances to increase RoCE logger buffer size to 32MB.
    • ]]>
  • This product fixes the memory allocator warning caused by RoCE driver.
  • This product fixes mutex dead lock issue when loading/unloading the bonding and bnxt_re drivers.
  • This product fixes incorrect message observed after pci removal-rescan when LAG is created.
    • ]]>
  • Support autoconfig command.

    •             storcli /cx set autoconfig = < none | JBOD >

    • Added a new option [ReuseTargetId] to add vd command. If "ReuseTargetId" is mentioned in the add vd command, the FW will allow reusing of TargetIDs without 120 seconds delay.
    • Added support for UBM7 backplanes.
    ]]>         Support Microsoft Windows Server 2025

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with Intel IPU.2023.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.1 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.1 guidance.

    Known Issues:

    None

    ]]>         TBD

    ]]>
  • This product enhances to update the install section for Device ID mapping to enable the missing configuration.
  • This product enhances to compile with WDK (Windows Driver Kit) 26080.
  • This product enhances to update project makefile and INF file for compilation with the new toolchain.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail WS2025 HSTI test.

    Addressed an issue where the PCIe link speed of Microchip AROC Gen10 SR controller (AROC controller) may downgrade.

    Known Issues:

    None]]>         Updated some Japanese translation.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of the MR controller.

    Addressed an issue where Redfish BIOS actions, ResetBIOS and ChangePassword may not work.

    Addressed an issue where Battery Failure IML message log may be incorrectly logged for the Smart Array controller with Smart Storage Battery.

    Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

    Known Issues:

    None

    ]]>         This component contains now available with the new HPE code signing key.

    ]]>         This product now supports Red Hat Enterprise Linux 8 update 10.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with Intel IPU.2023.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.1 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.1 guidance.

    Known Issues:

    None

    ]]>         This product added support to new Gen12 servers.

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.5 and Columbiaville 4.5.

    ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us
    • ]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
    • ]]>         The following enhancement has been added in this version:

    • Added support of RHEL 8.7

    • Added support of RHEL 9.1

    • Added support of SLES15 SP4

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 7.8 

    • Added support of Rhel 8.2 

    • Added support of SLES15 SP2

    ]]>         The following fixes were incorporated in this version:

    • The Enabled-ClusterS2D command now completes successfully when executed on a SATA drive within a D3610 disk enclosure for a NonStop solution.

    • The smart carrier, which is the drive case for SAS drives, now authenticates in the D3610/D3710 drive enclosure.

    • Added new 7-segment error codes E0 and E1 to report issues with Fan modules A and B, respectively. These new codes only apply to the D3610/D3710 and only display when running firmware 5.04.

    • If the storage enclosure processor within the I/O module fails, a hard reset (power down and then power up) is executed to ensure the processor comes back online.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         New release for version 7.728.2.0.

    ]]>         New release for version 7.726.1.0.

    ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>         This product corrects an issue which the E1R driver didn't disable auto-negotiation when choosing a specific speed and duplex setting for Windows Server 2022.

    ]]>         TBD

    ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>         Firmware for the following devices has been updated to 14.32.1900:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.4030:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.

     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 14.32.1010:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.3502:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    New features and changes included in firmware version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.                                                                                                                     

    New features and changes included in firmware version 16.35.3502:

    • Modified the TCP IPv4 flows so that the steering TIR rx_hash_symmetric field is now valid only when both the SRC and DST fields are not set to zero.
    ]]>         The following issues have been fixed in firmware version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.

    No fixes are included in firmware version 16.35.3502.

    ]]>         Firmware for the following device has been updated to 14.32.1900:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

    ]]>         No fixes have been included in firmware version 14.32.1900.

    ]]>         Firmware for the following device has been updated to 14.32.1010:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    New features and changes included in version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.
    ]]>         The following issues have been fixed in component sub-version 1.0.6(C):

    • Transaction test error was reported while deploying the component using SPP from HPE Linux SDR.

    The following changes have been made in component sub-version 1.0.6(B):

    • Product rebuilt to support FIPS mode enabled OS environment.

    The following changes have been made in component sub-version 1.0.6(A):

    • Product rebuilt to have the new SHA 384 signature.

    The following issues have been fixed in firmware version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
    ]]>
  • Assert fixes, logging enhancements and all current firmware improvements and bug fixes.
    • ]]>
  • Assert fixes, logging enhancements and all current firmware improvements and bug fixes.
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.00

    09.15.00

    7.36

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.00

    09.15.00

    7.36

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.10.00 09.15.00 7.36 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.10.00 09.15.00 7.36 0.0
    ]]>         Fixed the following behavior:

    Temperature Misreading: the adapter was reading incorrect reading of the temperature on the HPE SN1610Q 32Gb Fibre Channel Host Bus adapter's Small Form-factor Pluggable. The symptom would result in a temperature spike and potentially reset the system

     

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.02.05

    9.14.00

    7.25

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.02.05

    9.14.00

    7.25

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.02.05

    9.14.00

    7.25

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.02.05

    9.14.00

    7.25

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.09.07

    09.14.01

    7.36

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.09.07

    09.14.01

    7.36

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.09.07 09.14.01 7.36 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.09.07 09.14.01 7.36 0.0
    ]]>         Fixed the following behavior:

    Temperature Misreading: the adapter was reading incorrect reading of the temperature on the HPE SN1610Q 32Gb Fibre Channel Host Bus adapter's Small Form-factor Pluggable. The symptom would result in a temperature spike and potentially reset the system

     

    ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 8.7 

    • Added support of Rhel 9.1 

    • Added support of SLES15 SP4

    ]]>         The following fixes were incorporated in this version:

    • Code optimization to save memory repo.

    • TLB exception seen while doing esp reset when expander reset was in progress.

    • Added the psoc 8.93 binary in peripheral images, updated the reveille version numbers.

    • Added whole new Delta PS-pmbus code , Updated the ESP version number.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of an MR controller.

    Addressed an issue where Windows Server 2025 HLK TPM2.0 UEFI Preboot Interface test failed on XL450 Gen10.

    Addressed an issue where WHLK HSTI test failed.

    Addressed an issue where the "Physical Drive missing" message appears twice in POST when a drive was removed and rebooted with incorrect severity in IML.

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options and navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Addressed an issue where system may encounter an RSOD while updating the SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes the mitigation for security vulnerabilities CVE-2023-45229, CVE-2022-36763, CVE-2022-36764, CVE-2021-38578, CVE-2023-5678 and CVE-2024-0727. The security vulnerabilities are documented in the CVE report site. They are not unique to HPE servers. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added value "C6 without C1E" in System Configuration (RBSU) option "Power Management/Advanced Power Options menu/Minimum Processor Idle Power Core C-State". When selected, the Minimum Processor Idle Power Core C-State is C6 with C1E disabled. This setting has the following Redfish property: /redfish/v1/systems/1/bios/MinProcIdlePower

    Known Issues:

    None]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail WS2025 HSTI test.

    Addressed an issue where the PCIe link speed of Microchip AROC Gen10 SR controller (AROC controller) may downgrade.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail WS2025 HSTI test.

    Addressed an issue where the PCIe link speed of Microchip AROC Gen10 SR controller (AROC controller) may downgrade.

    Known Issues:

    None]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.42.1000:

    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 20.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Incorrect MPLS packets discards flow when the GLOBAL pause capability was disabled.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.41.1000:

    • Added support for steering match on packet l4_type through FTG/FTE.
    ]]>         No fixes are included in version 20.41.1000.

    ]]>
  • Added Windows 2025 Support
    • ]]>
  • Support HPE ProLiant DL180 Gen10 Server  
    • ]]>
  • This product fixed an issue that caused the MlxNdPerf tool to get stuck when sending less packets than the QP depth while using the -UseEvents parameter.
  • This product fixed an issue that caused the MlxNdPerf tool to send more packets than the "-Iterations" parameter required when the number of iterations was less than the QP depth.
  • This product fixed an issue which allowed the Schedule-Queue to be attached to the vPort when it exceeded the MaxNumSqInputs value set.
  • This product fixed an issue which resulted in BSOD when receiving LSO packets with L4 frag separated from L2/3.
    • ]]>         This product fixed BSOD event not being detected when collecting mstdump on BUGCHECK while the device was already down.

    ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Improves performance in certain file systems and implements fixes for several of the previous firmware’s shortcomings.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs
    • ]]>
  • Improves performance in certain file systems and implements fixes for several of the previous firmware’s shortcomings.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs.
    • ]]>         Support RL300 Gen11 server and Gen12 servers.

    ]]>
  • Add i2c error event check
    • ]]>
  • Mitigates the potential drive FW halt issue.
    • ]]>
  • Mitigates the potential drive FW halt issue.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of an MR controller.

    Addressed an issue that Battery Failure IML message log may be incorrectly logged for MR Controller with Smart Storage Battery.

    Addressed an issue where system failed to boot with selected NVMe HDD by setting One-Time Boot Option in ILO Web.

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This revision of the System ROM includes the mitigation for security vulnerabilities CVE-2023-45229, CVE-2023-5678, and CVE-2021-38578. The security vulnerabilities are documented in the CVE report site. They are not unique to HPE servers. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options, navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Removed the value of "Not Specified" in System Configuration (RBSU) option "Server Security/Trusted Platform Module Options/Current TPM 2.0 Active PCRs" and set the default value as "SHA1 and SHA256".

    Known Issues:

    None]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>         TBD

    ]]>
  • This product enhanced to support log FW Failure Critical Data in Recovery Mode.
  • This product enhanced to support add module parameters pause_rx and pause_tx for Link Flow Control and enable it by default.
    • ]]>         This product now supports SUSE Linux Enterprise Server 15 SP6.

    ]]>         This product fixes an issue where the driver will honor user IRQ affinity settings.

    ]]>         Important Notes:

    Ver. 06.00.03.604(B) contains updates to the firmware packaging and is functionally equivalent to ver. 06.00.03.604. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 06.00.03.604.

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>         Updated to version 3.3-3

    This Component is FIPs enabled.

    ]]>         This Component is FIPs enabled.

    ]]>         Updated to version 3.3-3

    This Component is FIPs enabled.

    ]]>         This Component is FIPs enabled.

    ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
    • ]]>
  • Fixed CA https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00126514en_us
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Added supported_platforms tag
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Corrective actions to fix potential background media scan issue.
    • ]]>
  • Corrective actions to fix potential background media scan issue.
    • ]]>         Added support of ESXi 8.0 U1

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Optimize sensor reporting to improve failure rate - AFR (Annual Failure Rate) metrics
    • ]]>
  • Optimize sensor reporting to improve failure rate - AFR (Annual Failure Rate) metrics
    • ]]>         Firmware for the following devices has been updated to 14.32.1900:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.4030:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.

     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 14.32.1010:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.3502:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    New features and changes included in firmware version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.                                                                                                                     

    New features and changes included in firmware version 16.35.3502:

    • Modified the TCP IPv4 flows so that the steering TIR rx_hash_symmetric field is now valid only when both the SRC and DST fields are not set to zero.
    ]]>         The following issues have been fixed in firmware version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.

    No fixes are included in firmware version 16.35.3502.

    ]]>         Upgraded to version 26.41.1000

     

    ]]>         New features and changes included in version 26.38.1002:

    • Enabled 200Gb/s out-of-the-box throughput on crypto capable devices.
      Note: If any crypto offloads is in use, 200Gb/s throughput can be achieved only after the next firmware reset
    • Added support for VF migration. The hypervisor can now suspend its VF, meaning from that point the VF cannot perform action such as send/receive traffic or run any command. In this firmware version only the suspend resume mode is supported (on the same VM).
    • Added a new MAD of class SMP that has the attributes hierarchy_Info as defined in the IB Specification and is used to query the hierarchy information stored on the node and the physical port.
    • Added pci_rescan_needed field to the MFRL access register to indicate whether a PCI rescan is needed based on the NV configurations issued by the software.
      Note: If the Keep Link Up NV configuration is changed, phyless reset will be blocked.
    • Added Precision Time Protocol (PTP) support.
      In this version, the support includes:
      16 PTP SQs only
      only 2 ports
      only RT clock mode
      In this version, the following are not supported:
      PTP packet drop
      PTP SQ on VF
      Note: All PTP SQs must be closed before operating LFWP (life fw patch).
    • Added support for HW Steering objects dump via resource dump interface.
      This support includes: STC, RTC, STE, modify argument, and modify pattern.
    • Added support for VF migration.
    • Added a new register (vhca_icm_ctrl access_reg) to enable querying and limiting the ICM pages in use.
    • Added support for creating a steering definer with a dword selector using create_match_definer_object and the "SELECT" format.
    • Enhanced the XRQ QP error information provided to the user in case QP goes into an error state. In such case, QUERY_QP will provide information on the syndrome type and which side caused the error.
    • [Beta] Added HW Steering support for the following:
      set, add and copy inline STC action
      set and copy actions for several fields using modify_pattern object and inline stc modify action
      FDB mode in HW steering using FDB_RX and FDB_TX flow table types
      ASO flow meter action via STC
      flow counter query using ASO WQE
      allocation of large bulks for the objects: STE, ASO flow meter and modify argument
      jumbo match RTC
      count action in STC
    • Added support for holdover mode to comply to SyncE specifications (EEC compliance) to limit the maximum phase transient response upon link loss. 
    • Added support for noise filtering to comply to the SyncE specifications requirements.
    • Optimized the performance of vDPA virtio including: throughput, QoS, and accuracy of min/max bandwidth when virtio works with the QoS settings.
    • The new vDPA virtio-net Full Emulation capability reduces the switchover time of creating a virtq from scratch during live migration, by creating the virtq beforehand on the target server.
      When swithover happens, the pre-created virtq will be used and modified with necessary parameters.
    • Updated the ibstat status reported when the phy link is down. Now QUERY_VPORT_STATE.max_tx_speed of UPLINK will not be reported as 0 anymore.
    • Replaced the deprecated NetworkPort schema with Port schema in NIC RDE implementation. 
    • Enabled the option to modify the ip_ecn field in the packet header in firmware steering.
    • Added support for advanced ZTR_RTTCC algorithm based on the Programmable CC platform to achieve better congestion control without dependency on the switch ECN marking.
    • DIM is used to tune moderation parameter dynamically for vDPA using an mlxreg command.
      To disable this capability, run:
      mlxreg -d /dev/mst/mt41686_pciconf0 --reg_id 0xc00d --reg_len 0x8 -s "0x4.1:1=0x0"
    • Modified the TX or RX cache invalidation behavior. TX or RX cache invalidation now does not occur automatically but only when the software performs the sync operation using the using sync_steering command.
    • Modified the maximum bulk size per single allocation from "log_table_size - log_num_unisizes", to allocate any range size, to remove limitations that HWS objects such as counters and modify arguments might encounter. 
    • Added support for creating a dynamic flex parser on untrusted function, and changed the flex parser cap for untrusted function to the following:  
      maximum flex parser node = 2
      maximum dw sample = 4
    • Added support for SNAPI (comm-channel) connection while running on raw ETH link.
    • Crypto features can be in either wrapped or unwrapped mode. Meaning, the key can be wrapped or in plaintext when running the CREATE_DEK PRM command.
      To comply with the requirements specified in FIPS publication, all the created DEKs must be wrapped.
      This feature adds new NV_CONFIG per device to control this mode, and enables the user to change all the crypto features to wrapped or cleartext.
    • [Beta] A new capability that enables the software to directly access ICM and write/modify the DEK objects. Such change improves the DEK object update rate by re-using DEK object instead of creating a new one.
      In addition, added the following:
      New for DEK object: bulk allocation, modify_dek cmd, and new mode - sw_wrapped.
      New general object INT_KEK

     

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>         This product is updated to maintain compatibility with CNSA (Commercial National Security Algorithm) compliance.

    ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
    • ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
    • ]]>         TBD

    ]]>         This product correct an issue which removed all legacy RSS/DRSS module params information for ESXi 7.0 or later.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         7.28 GCA/Production Drop

    ]]>         Support Microsoft Windows Server 2025

    ]]>         TBD

    ]]>
  • This product enhances the Get Package Status command support.
  • This product enhances to add a warning message when a non-supported dual-rate transceiver is used.
  • This product enhances the Addition of SFF 8472 Transceiver Power Details to RDE Port Metrics.
    • ]]>
  • This product addresses an issue where getting Transceiver Temperature erroneous unit value.
  • This product addresses an issue when NC-SI Query Pending NC PLDM Response is wrong when NIC does not have a pending PLDM request.
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Add "IO is completed, no reset is required" kernel message when the pending SCSI IO get completed before issuing the reset
  • Support RHEL 8.9
    • ]]>
  • Fix an issue that Doorbell, Host diagnostic and Scratchpad registers could return 0.
    • ]]>         New OS support for RHEL8u9.

    ]]>         Fix an issue that kernel WARNING with call trace may be logged when server shut down/rebooted

    ]]>
  • Fix for Uncorrectable Machine Check Exception (UMCE) issue which might occur.
    • ]]>
  • Fixed CA https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00126514en_us
    • ]]>         Updated to version 14.4.329.3

     

    ]]>         Updated to version 14.4.329.3

     

    ]]>         Added new Microsoft Option Rom UEFI CA 2023 secure boot key.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where certain Server Configuration Lock settings cannot be modified by Redfish interface.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.E for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>         Added support of ESXi 8.0 U1

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following fixes were incorporated in this version:

    • Smart Array reporting "Storage Enclosure FW upgrade Problem Detected".
    • PSU version is showing as "No Ver" after inserted the New bel power PSU.
    • GEM_5_2 Coverity defect fix.

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>
  • Add support of new flash on the latest expander board.
  • Provided a proper downgrade restriction to ensure firmware compatibility with the latest flashes.
    • ]]>
  • Add support of new flash on the latest expander board.
  • Provided a proper downgrade restriction to ensure firmware compatibility with the latest flashes.
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>         This product fixes the kernel compilation issue.

    ]]>         This product now supports Red Hat Enterprise Linux 8 update 10.

    ]]>         This product fixes some minor compiling issues such as warning message.

    ]]>         Important Notes:

    Ver. 05.01.04.913(B) contains updates to the firmware packaging and is functionally equivalent to ver. 05.01.04.913. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 05.01.04.913.

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with Intel IPU.2023.3 guidance.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with Intel IPU.2023.3 guidance.

    Known Issues:

    None]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.329.10 14.4.329.10 14.4.329.9 14.4.290.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.329.10 14.4.329.10 14.4.329.9 14.4.290.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.329.10 14.4.329.10 14.4.329.9 14.4.290.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.329.10 14.4.329.10 14.4.329.9 14.4.290.0
    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Added support for Microsoft Server Windows 2022.
    • ]]>
  • Fix contains code improvements for SMART reporting.
    • ]]>
  • Added support for VMware 6.7
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         Support new Gen12 servers.

    ]]>         Support both Gen10P and Gen11 servers

    ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Fixes the Power Coordination algorithm which ensures the drive will properly negotiate power with SPL-2 and newer compliant controllers.
    • ]]>
  • Fixes the Power Coordination algorithm which ensures the drive will properly negotiate power with SPL-2 and newer compliant controllers.
    • ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 22.42.1000:

    • Prevented HCA_CAP from allowing rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    • MSI-X on SF can be received now through the PF's MSI-X vector.
    ]]>         The following issues have been fixed in version 22.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • SFF module could not access the EEPROM data when removing the CMIS module and inserting the SFF module instead of it.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 22.41.1000:

    • The new unified_fdb subdomain simplifies the FDB model by eliminating the need to duplicate rules for RX and TX tables. This domain is directionless, meaning no RX/TX specific actions are allowed. Firmware now handles packet transitions IN and OUT of the unified domain, allowing for a more streamlined packet flow management. Software can now transition between unified_fdb and FDB_RX/FDB_TX domains as long as the packet maintains the same direction, without the risk of dropping the packet when crossing between RX and TX.
    • Implemented Deterministic Random Bit Generator (DRBG) algorithm on top of firmware TRNG (the source for raw data input) in accordance with NIST SP800-90A.
    • Added support for vDPA virtual queue state change from suspend to ready, and discrete mkey for descriptor. vDPA Live Migration uses these two new capabilities to reduce downtime since vq can go back to ready state for traffic and descriptor-only-mkey can help reduce mkey mapping time.
    • Added the ability to generate up to 2^30 STE objects through the general object creation command.
    • Added a new NVConfig option to copy AR bit from the BTH header to the DHCP header.
    • Added the option to provide field's offset and length in Steering add_action option.
    • Added support for steering match on packet l4_type through FTG/FTE.
    • Extended Flex Parser merge mechanism to support hardware capabilities.
    • Enabled the option to disable the native parser when the parse graph node is configured with the same conditions.
    • Added support for father/son headers parsing.
    • Added support for tunnel_offload in LRO.
    ]]>         The following issues have been fixed in version 22.41.1000:

    • GTP length field was automatically modified at the TX side when an incorrect or invalid length was detected.
    • Switch port would go down due to MC packets mirrored back to the switch when in promiscuous mode.
    • Traffic failure occurred when modifying the VIRTIO_NET_F_MRG_RXBUF bit for the VDPA device during traffic.
    • The second mkey index returned even if it was not set in the creation of the virtio q when querying virtio q object.
    • Traffic loss occurred after performing Live Migration with virtio vq "frozen-ready" feature.

    Note: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.

    ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Optimize sensor reporting to improve failure rate - AFR (Annual Failure Rate) metrics
    • ]]>
  • Optimize sensor reporting to improve failure rate - AFR (Annual Failure Rate) metrics
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         SR 2.9.0/SR 3.4.0 RC

    ]]>
  • Improve Raid 1/10 write sequential performance when DDR cache is on and writes are not aligned to stripe.
    • ]]>         Support ESXi8.0

    ]]>
  • Support HPE ProLiant DL325 Gen10 Plus Server
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Added supported_platforms tag
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4 and Columbiaville 4.4.

    ]]>         TBD

    ]]>
  • This product enhances to support RoCE loopback traffic with TF enable.
  • This product enhances appropriate log messages when roce traffic is started on a lossy queue.
  • This product enhances to increase RoCE logger buffer size to 32MB.
    • ]]>
  • This product fixes the memory allocator warning caused by RoCE driver.
  • This product fixes mutex dead lock issue when loading/unloading the bonding and bnxt_re drivers.
  • This product fixes incorrect message observed after pci removal-rescan when LAG is created.
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>         This product corrects an issue where the adapter may go offline after firmware is flashed, but before reboot.

    ]]>
  • This product now supports SUSE Linux Enterprise Server 15 SP6.
  • This product now sets the minimum number of allocated queues to 4.
    • ]]>         This product fixes the ethtool set_channles timeout when RDMA is loaded.

    ]]>         This product enhanced to support Red Hat Enterprise Linux 9 update 5.

    ]]>
  • This product fixes an issue where VLAN set operation may leads to deadlock. 
  • This product fixes an issue where a NULL pointer dereference in early reset.
  • This prodcut fixes an issue where users fail to change the number of queues (channels).
  • This product fixes an issue where system hang when VFs are created and VLAN configured.
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail WS2025 HSTI test.

    Addressed an issue where the PCIe link speed of Microchip AROC Gen10 SR controller (AROC controller) may downgrade.

    Known Issues:

    None]]>         Updated some Japanese translation.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of the MR controller.

    Addressed an issue where Redfish BIOS actions, ResetBIOS and ChangePassword may not work.

    Addressed an issue where Battery Failure IML message log may be incorrectly logged for the Smart Array controller with Smart Storage Battery.

    Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

    Known Issues:

    None

    ]]>         Initial version

    ]]>
  • This product fixed an issue that caused the MlxNdPerf tool to get stuck when sending less packets than the QP depth while using the -UseEvents parameter.
  • This product fixed an issue that caused the MlxNdPerf tool to send more packets than the "-Iterations" parameter required when the number of iterations was less than the QP depth.
  • This product fixed an issue which allowed the Schedule-Queue to be attached to the vPort when it exceeded the MaxNumSqInputs value set.
  • This product fixed an issue which resulted in BSOD when receiving LSO packets with L4 frag separated from L2/3.
    • ]]>         See the iSUT Release Notes for information about the enhancements added in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the enhancements added in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.42.1000:

    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 20.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Incorrect MPLS packets discards flow when the GLOBAL pause capability was disabled.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.41.1000:

    • Added support for steering match on packet l4_type through FTG/FTE.
    ]]>         No fixes are included in version 20.41.1000.

    ]]>
  •  Improvements to our out-of-band message handling to ensure robust device management capabilities
  • Changes to improve our PCIe link compatibility as well as device reliability
    • ]]>         Fix issues of MCTP over I2C fix for obtaining Endpoint ID(EID), and SPDM support fix onto MCTP reply message.

    ]]>         Updated to driver version 14.4.313.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2025


     

     

    ]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail WS2025 HSTI test.

    Addressed an issue where the PCIe link speed of Microchip AROC Gen10 SR controller (AROC controller) may downgrade.

    Known Issues:

    None]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>         Firmware for the following devices has been updated to 14.32.1900:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.4030:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.
     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 14.32.1010:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.3502:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

     

    New features and changes included in firmware version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.
       

    New features and changes included in firmware version 16.35.3502:

    • Modified the TCP IPv4 flows so that the steering TIR rx_hash_symmetric field is now valid only when both the SRC and DST fields are not set to zero.
    ]]>         The following issues have been fixed in firmware version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
       

    No fixes are included in firmware version 16.35.3502.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         The following new features and changes have been included in version 24.04-0.6.6.1:

    • Added support for Live Migration. Live migration refers to the process of moving a guest virtual machine (VM) running on one physical host to another host without disrupting normal operations or causing any downtime or other adverse effects for the end user.
    • Added support for multicast control path packet snooping (IGMP/MLD) and offload of MDB notifications in order to replicate multicast traffic to multiple destinations in the hardware.
    • Increased the netdev maximum channels from 128 to 256 for systems with a high number of cores.
    • Enhanced performance by removing the internal Rx path from the internal page cache, thus allowing the driver to always use the kernel's page_pool.
    • Enhanced performance by adding the following modifications in XDP:
      • Added XDP multi-buffer support to the default RQ type (Striding RQ)
      • Added support for XDP multi-buffer redirect-in
      • Allowed non-linear single-segment frames in XDP TX MPWQE
    • Increased the maximum outstanding DC atomic reads to 32 to enable the driver to handle reads larger than 8K. Now log_max_ra_{res/req}_dc is exposed in DV API, enabling the user to see both RC and DC values.
    • Added support for Linux kernel DPLL subsystem as a mechanism for working with clock signals in NVIDIA's proprietary synchronous ethernet protocol daemon. This new mechanism enables the use of both VFs and SFs, and is supported starting from korg6.8.
    • Limited the number of MADs received on the wire that are queued in the kernel as they are waiting for the user-space application to 200k per umad file. By that, preventing malicious or faulty behavior of flooding a node with MADs and exhausting its memory.
    • Added the option to expose offloaded FDB state (flags, counters, etc.) via debugfs for debugging purposes.

    $ cat mlx5/0000\:08\:00.0/esw/bridge/bridge1/fdb

    DEV MAC VLAN PACKETS BYTES LASTUSE FLAGS

    enp8s0f0_1 e4:0a:05:08:00:06 2 2 204 4295567112 0x0

    enp8s0f0_0 e4:0a:05:08:00:03 2 3 278 4295567112 0x0

    • Added support for over KORG 6.7 read frequency_diff.
    ]]>         The following issues have been fixed in version 24.04-0.6.6.1:

    • An issue related to the comparison process between the SW steering and FW steering modes to avoid kernel crashes incidences.
    • The tc_wrap tool did not work properly when VLAN was configured as the tool incorrectly handled the library function return value.
    • An IPSec issue that resulted in Crypto offload getting disabled.
    • Memory corruption issue when running XDP traffic.
    • IFA packets were sent from the incorrect port on VF LAG.
    • An issue that caused a deadlock in the flow of disabling the LAG when changing eswitch mode from switchdev to legacy when a LAG bond existed on the machine.
    • In systems with 64k page size, applications opening a substantial amount of RDMA resources such as UARs, QPs, and CQs might encounter errors during the creation of these resources due to limitations in PCI BAR size.
    • PFC configuration was reset when updating the cable length via mlnx_qos.
    ]]>
  • Fixes the Power Coordination algorithm which ensures the drive will properly negotiate power with SPL-2 and newer compliant controllers.
    • ]]>
  • Fixes the Power Coordination algorithm which ensures the drive will properly negotiate power with SPL-2 and newer compliant controllers.
    • ]]>         TBD

    ]]>
  • This product addressed an issue where Network Interface initialization failure under OS or Firmware rollback may be seen with LLDP enabled.
  • This product addressed an issue where RDE PermanentMACAddress changes simultaneously when send PATCH request for MACAddress property with Firmware 4.30.
    • ]]>
  • This version of FW now supports the 15.36TB model and FW fixes of drive time-out/failures.
    • ]]>         TBD

    ]]>         This product addresses an issue that FCoE Boot Target issue.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>         Added support for:

    RedHat Enterprise Linux 9.5

    Updated to driver version 10.02.12.01-k1

    ]]>         Added support for:

    Red Hat Enterprise Linux 8.10

    Red Hat Enterprise Linux 9.4

    SuSE Linux Enterprise Server 15sp6

    Updated Driver version 10.02.12.01-k1

    ]]>
  • AMD EPYC DRTM Driver update
    • ]]>
  • Add support for Windows Server 2025
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=a00136659en_us
    • ]]>
  • Fix for V6 Read disturb issue (which might have caused data integrity issue) and other issues.
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>         Firmware for the following device has been updated to 14.32.1900:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

    ]]>         No fixes have been included in firmware version 14.32.1900.

    ]]>         Firmware for the following device has been updated to 14.32.1010:

    • P11338-B21 (HPE Ethernet 10Gb 2-port 548SFP+ Adapter)

    New features and changes included in version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.
    ]]>         The following issues have been fixed in version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
    ]]>         irmware for the following devices has been updated to 12.28.2302:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.3006:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)
       

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No new issues have been fixed in version 12.28.2302.
     

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         irmware for the following devices has been updated to 12.28.2006:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.3006:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)


    New features and changes included in version 1.0.0.14:

    • Added firmware flash support on Microsoft Windows Server 2025.

    New features and changes included in version 12.28.2006:

    • Increased the maximum XRQ number to 512.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in firmware version 12.28.2006:

    • Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
    • Increased PHY power consumption limit to 1.5w.
    • Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>         TBD

    ]]>         This product addresses an issue where BSOD is seen.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>         This product correct an issue which the E1R driver didn't disable auto-negotiation when choosing a specific speed and duplex setting for Windows Server 2022.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>         TBD

    ]]>
  • This product addressed an issue where Network Interface initialization failure under OS or Firmware rollback may be seen with LLDP enabled.
  • This product addressed an issue where RDE PermanentMACAddress changes simultaneously when send PATCH request for MACAddress property with Firmware 4.30.
    • ]]>
  • This product now supports ethtool flow-type ether.
  • This product now adds VF reset on Tx Malicious Driver Detection(MDD) event.
  • This product now supports kernel's DPLL configuration.
    • ]]>         This product now supports Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK NG Adapter for HPE.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>         This product enhanced the compatibility with the latest drivers.

    ]]>
  • Added support for saving Managed SED master key and reset key in cipher text in controller NVRAM instead of clear text.
  • Changed temperature polling period from 1 minute to 5 minutes for HBA mode drives that are in low power state.
  • Added support for clearing UREs in unmapped LBA range of fault tolerant logical drives.
  • Improved random write and mixed read-write performance.
  • Added support for SED encryption configuration through Redfish interface.
  • Added support of Redfish Chassis implementation for UBM Backplanes.
  • Added Redfish ACTION:
    • Storage.SetEncryptionKey
  • Added support for Redfish property PATCH:
    • Storage.EncryptionMode
    • Storage.HotspareActivationPolicy
    • Drive.HostspareReplacementMode
    • Drive.HotspareType
    • Volume.Encrypted
  • Added support for Redfish Status.Conditions property to resources:
    • Drive
    • Port
    • StorageController
    • StorageController.CacheSummary
    • Volume
  • Added support for Redfish properties:
    • Drive.DriveFormFactor
    • Drive.FirmwareVersion
    • Drive.Manufacture (SAS only)
    • Drive.SlotCapableProtocols
    • StorageController.AssetTag
    • StorageController.Links.PCIeFunction
    • Volume.BlockSizeBytes
    • Volume.LogicalUnitNumber
  • Added support for PLDM Type5 UBM PIC firmware flashing behind expander.
    • ]]>
  • Fixed an issue where the host experienced BSOD while clearing the controller configuration.
  • Fixed controller lockups caused by incorrect address reads and partial RAM initialization for PCIe functions, leading to ECC errors.
  • Fixed issues with external storage.
  • Fixed issues with the SATA drive.
  • Fixed issues with the SED drive.
  • Fixed issues with the spare drive.
  • Corrected MCTP-related issues.
  • Fixed surface scan issues on the RAID 50.
  • Fixed issues encountered during heavy I/O operations.
  • Fixed volume issues on the failed drive.
  • Fixed issues for incorrect Severity reported in Redfish events.
  • Fixed issues for incorrect Status reported in Redfish resources.
  • Fixed an issue with improper capacity information in Redfish drive Name.
  • Fixed an issue where Redfish long running task status is not reported.
  • Fixed an issue where DurableNameFormat for RAID volumes are reported as UUID in RDE READ operations, but should be NAA.
  • Fixed an issue where failed to take ownership of, or to revert, a SED through Redfish.
  • Fixed an issue when a drive hosting a RAID 0 Volume is removed and reinserted, a VolumeOK event is not generated.
  • Fixed an issue where ILORest return "AccelerationMethod" as "ControllerCache" instead of “none” when controller cache is not enable or preset.
    • ]]>
  • Added support for saving Managed SED master key and reset key in cipher text in controller NVRAM instead of clear text.
  • Changed temperature polling period from 1 minute to 5 minutes for HBA mode drives that are in low power state.
  • Added support for clearing UREs in unmapped LBA range of fault tolerant logical drives.
  • Improved random write and mixed read-write performance.
  • Added support for SED encryption configuration through Redfish interface.
  • Added support of Redfish Chassis implementation for UBM Backplanes.
  • Added Redfish ACTION:
    • Storage.SetEncryptionKey
  • Added support for Redfish property PATCH:
    • Storage.EncryptionMode
    • Storage.HotspareActivationPolicy
    • Drive.HostspareReplacementMode
    • Drive.HotspareType
    • Volume.Encrypted
  • Added support for Redfish Status.Conditions property to resources:
    • Drive
    • Port
    • StorageController
    • StorageController.CacheSummary
    • Volume
  • Added support for Redfish properties:
    • Drive.DriveFormFactor
    • Drive.FirmwareVersion
    • Drive.Manufacture (SAS only)
    • Drive.SlotCapableProtocols
    • StorageController.AssetTag
    • StorageController.Links.PCIeFunction
    • Volume.BlockSizeBytes
    • Volume.LogicalUnitNumber
  • Added support for PLDM Type5 UBM PIC firmware flashing behind expander.
    • ]]>
  • Fixed an issue where the host experienced BSOD while clearing the controller configuration.
  • Fixed controller lockups caused by incorrect address reads and partial RAM initialization for PCIe functions, leading to ECC errors.
  • Fixed issues with external storage.
  • Fixed issues with the SATA drive.
  • Fixed issues with the SED drive.
  • Fixed issues with the spare drive.
  • Corrected MCTP-related issues.
  • Fixed surface scan issues on the RAID 50.
  • Fixed issues encountered during heavy I/O operations.
  • Fixed volume issues on the failed drive.
  • Fixed issues for incorrect Severity reported in Redfish events.
  • Fixed issues for incorrect Status reported in Redfish resources.
  • Fixed an issue with improper capacity information in Redfish drive Name.
  • Fixed an issue where Redfish long running task status is not reported.
  • Fixed an issue where DurableNameFormat for RAID volumes are reported as UUID in RDE READ operations, but should be NAA.
  • Fixed an issue where failed to take ownership of, or to revert, a SED through Redfish.
  • Fixed an issue when a drive hosting a RAID 0 Volume is removed and reinserted, a VolumeOK event is not generated.
    • ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up.
    • ]]>
  • Added support for Microsoft Server Windows 2022.
    • ]]>         Updated to version 1.0.0.1

    ]]>         Updated to version 1.0.0.1

    ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Prioritize disabling Non-Fatal Error reporting at the beginning of FLR processing
  • Fix known FW bug PI/CI indexing issue
    • ]]>
  • Prioritize disabling Non-Fatal Error reporting at the beginning of FLR processing
  • Fix known FW bug PI/CI indexing issue
    • ]]>
  • Fixed an issue where the driver incorrectly handled multi-path failover.
  • Fixed an issue where the driver could hang under heavy I/O load.
    • ]]>
  • Fixed an issue where the driver incorrectly handled multi-path failover.
  • Fixed an issue where the driver could hang under heavy I/O load.
    • ]]>
  • Improves performance in certain file systems and implements fixes for several of the previous firmware’s shortcomings.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs.
    • ]]>
  • Improves data integrity. 
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions. 
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide a minor performance improvement.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of an MR controller.

    Addressed an issue where WHLK HSTI test failed.

    Addressed an issue where the "Physical Drive missing" message appears twice in POST when a drive was removed and rebooted with incorrect severity in IML.

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options and navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Addressed an issue where system may encounter an RSOD while updating the SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of an MR controller.

    Addressed an issue where WHLK HSTI test failed.

    Addressed an issue where the "Physical Drive missing" message appears twice in POST when a drive was removed and rebooted with incorrect severity in IML.

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options and navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Addressed an issue where system may encounter an RSOD while updating the SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None

    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>
  • This firmware revision improves data integrity and reliability by optimizing adjacent track refresh parameters and management of emergency power loss table structure.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in emergency power loss events.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide some minor performance improvements.
    • ]]>
  • This firmware revision improves data integrity and reliability by optimizing adjacent track refresh parameters and management of emergency power loss table structure.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in emergency power loss events.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide some minor performance improvements.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Provides proactive protection against contamination built up on the media and air-bearing surface of the heads by increased routine “sweeping” of the media surface.
    • ]]>
  • Provides proactive protection against contamination built up on the media and air-bearing surface of the heads by increased routine “sweeping” of the media surface.
    • ]]>         This product enhances libfwupg to improve NVRAM configuration updates.

    ]]>
  • This product fixes an issue where a dummy Serial Number is seen immediately after update the adapter firmware to version 2.30 (or earlier).
  • This product fixes an issue where Wake-on-LAN not working is seen.
    • ]]>
  • This product addresses a problem that might cause a BSOD when trying to reboot the system from operating Windows systems due to NIC internal software mutex problem.
  • This product addresses an issue where a random missing DHCP IP address occurs when the iLO shared NIC port is used, due to NIC internal software mutex problem.
  • This product addresses an issue that might cause the POST to get stuck due to NIC internal software mutex problem.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of an MR controller.

    Addressed an issue where Windows Server 2025 HLK TPM2.0 UEFI Preboot Interface test failed on XL450 Gen10.

    Addressed an issue where WHLK HSTI test failed.

    Addressed an issue where the "Physical Drive missing" message appears twice in POST when a drive was removed and rebooted with incorrect severity in IML.

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options and navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Addressed an issue where system may encounter an RSOD while updating the SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes the mitigation for security vulnerabilities CVE-2023-45229, CVE-2022-36763, CVE-2022-36764, CVE-2021-38578, CVE-2023-5678 and CVE-2024-0727. The security vulnerabilities are documented in the CVE report site. They are not unique to HPE servers. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added value "C6 without C1E" in System Configuration (RBSU) option "Power Management/Advanced Power Options menu/Minimum Processor Idle Power Core C-State". When selected, the Minimum Processor Idle Power Core C-State is C6 with C1E disabled. This setting has the following Redfish property: /redfish/v1/systems/1/bios/MinProcIdlePower

    Known Issues:

    None]]>         This component contains now available with the new HPE code signing key.

    ]]>
  • This product enhances driver logging error messages.
  • This product enhances a log message in case of failure.
  • This product enhances the ethtool maximum pre-set value for the combined channels.
  • This product enhances to prevent fortify memory copy warnings and errors.
  • This product enhances ntuple, RSS contexts, and improved PTP timeout.
    • ]]>
  • This product addresses an issue when reattaching a slave device to a network bond with HWRM (Hardware Resource Manager).
  • This product addresses the mutex deadlock issue when loading/unloading the bonding and bnxt_re drivers.
  • This product addresses the problem where the automated process for installing RoCE drivers.
  • This product addresses the problem when allocating memory with the GFP flag.
  • This product addresses an issue that causes the system to crash when a virtual machine (VM) with hardware Link Aggregation Group (LAG) enabled is removed.
  • This product addresses an issue where the system would crash during the process of offloading network flows to hardware.
  • This product addresses an issue where the system would experience a kernel panic when unloading a module while xdpsock is running.
  • This product addresses the issue where fix bug in error handling code path of the probe.
  • This product addresses an issue where kernel warnings on 6.5 and newer kernels.
  • This product addresses an issue where an error occurs when attempting to reinitialize a Virtual Function (VF) after performing a firmware reset and reinitializing the Physical Function (PF).
  • This product addresses an issue where fix RSS table size calculation.
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.3 guidance.

    Known Issues:

    None

    ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
    • ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.00

    09.15.00

    7.36

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.00

    09.15.00

    7.36

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.10.00 09.15.00 7.36 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.10.00 09.15.00 7.36 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.00

    09.15.00

    7.36

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.00

    09.15.00

    7.36

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.10.00 09.15.00 7.36 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.10.00 09.15.00 7.36 0.0
    ]]>         Support new OS Microsoft Windows Server 2025.

    ]]>
  • Fixed an issue with controllers having encrypted boot logical drives using Remote Key Management Mode.
    • ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         TBD

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • To improve the output format of the NVMe drive health log for the show command.
    • ]]>
  • Fixed an issue where failed drive details were displayed multiple times in the 'show config' output.
  • Fixed incorrect error messages displayed in SSACLI when the modify command threw an error if the 'drive' and 'drivetype' parameters coexisted.
  • Fixed an issue where the array creation command failed when executed with the drives=all and drivetype=sata_hdd parameters.
  • Fixed an issue where the drives behind the enclosures were missing in the SSACLI output.
  • Fixed an issue where users encountered a failure when launching the SSASCRIPTING tool to restore a RAID configuration with an unsupported parameter for PrebootHealthReporting.
    • ]]>
  • To improve the output format of the NVMe drive health log for the show command.
    • ]]>
  • Fixed an issue where failed drive details were displayed multiple times in the 'show config' output.
  • Fixed incorrect error messages displayed in SSACLI when the modify command threw an error if the 'drive' and 'drivetype' parameters coexisted.
  • Fixed an issue where the array creation command failed when executed with the drives=all and drivetype=sata_hdd parameters.
  • Fixed an issue where the drives behind the enclosures were missing in the SSACLI output.
  • Fixed an issue where users encountered a failure when launching the SSASCRIPTING tool to restore a RAID configuration with an unsupported parameter for PrebootHealthReporting.
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
  • Assert fixes, logging enhancements and all current firmware improvements.
    • ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
  • Assert fixes, logging enhancements and all current firmware improvements.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of an MR controller.

    Addressed an issue where WHLK HSTI test failed.

    Addressed an issue where the "Physical Drive missing" message appears twice in POST when a drive was removed and rebooted with incorrect severity in IML.

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options and navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Addressed an issue where system may encounter an RSOD while updating the SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of an MR controller.

    Addressed an issue where WHLK HSTI test failed.

    Addressed an issue where the "Physical Drive missing" message appears twice in POST when a drive was removed and rebooted with incorrect severity in IML.

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options and navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Addressed an issue where system may encounter an RSOD while updating the SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None

    ]]>         This product added support to new Gen11 and Gen12 servers.

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may fail WS2025 HSTI test.

    Addressed an issue where the PCIe link speed of Microchip AROC Gen10 SR controller (AROC controller) may downgrade.

    Known Issues:

    None]]>         Updated some Japanese translation.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 04.04.04.603 (2.00_12_18_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of the MR controller.

    Addressed an issue where Redfish BIOS actions, ResetBIOS and ChangePassword may not work.

    Addressed an issue where Battery Failure IML message log may be incorrectly logged for the Smart Array controller with Smart Storage Battery.

    Addressed an issue where the driver Health Message was shown twice in POST when drive was removed and ran cold boot.

    Known Issues:

    None

    ]]>         This product fixes the kernel compilation issue.

    ]]>         This product now supports Red Hat Enterprise Linux 8 update 10.

    ]]>         This product fixes an issue where the driver will honor user IRQ affinity settings.

    ]]>         Initial Build

    ]]>         Initial build

    ]]>
  • Support for PIN-based iLO5 onboarding into COM instead of PCID.
    • ]]>
  • Fixed an issue where HPE iLO RIBCL queries generated incorrect CAPACITY VALUE responses.
  • Fixed an issue where fetching the email details of an LDAP user where DistinguishedName containing special characters were causing the two-factor authentication process to fail.
  • Fixed an issue where the hpsetup/secureflash engine reports the HPE iLO 5 firmware update as a failure.
  • Fixed an issue where Xilinx XtremeScale X2522-25G cards drop from HPE iLO health monitoring.
  • Fixed the cpqHoMIBStatusArray status issue that did not get updated with proper details when a drive attached to HPE Smart Array P408i-a SR controller failed or degraded.
  • Fixed an incorrect AMS status (Not Available) that appeared on the HPE iLO interfaces while operating system indicated AMS status as running.

    •  

    ]]>         Important Notes:

    Ver. 1.0.0.22(D) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision D if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.0.0.22(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>         This product corrects an issue where the adapter may go offline after firmware is flashed, but before reboot.

    ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>
  • Firmware contains fix for bug that may cause drive to perform self-initiated reset in systems where maximum queue depth of 128 is exceeded.
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         TBD

    ]]>
  • This product addressed an issue where Network Interface initialization failure under OS or Firmware rollback may be seen with LLDP enabled.
  • This product addressed an issue where RDE PermanentMACAddress changes simultaneously when send PATCH request for MACAddress property with Firmware 4.30.
  • This product addressed an issue where data is interchanged of Port 1 and Port 4 ​when ​running ​a ​Redfish GET ​Operation ​under ​the NetworkAdapter, ​NetworkDeviceFunctions and Port ​Schema ​with ​"Metrics" ​properties.
    • ]]>         Firmware for the following devices has been updated to 14.32.1900:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.4030:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.
     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 14.32.1010:

    • P21930-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCAT Adapter)
    • P11341-B21 (HPE Ethernet 10Gb 2-port SFP+ MCX4621A-ACAB OCP3 Adapter)

     

    Firmware for the following device has been updated to 16.35.3502:

    • P21927-B21 (HPE Ethernet 100Gb 2-Port QSFP28 MCX516A-CCHT Adapter)

     

    New features and changes included in firmware version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.
       

    New features and changes included in firmware version 16.35.3502:

    • Modified the TCP IPv4 flows so that the steering TIR rx_hash_symmetric field is now valid only when both the SRC and DST fields are not set to zero.
    ]]>         The following issues have been fixed in firmware version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.
       

    No fixes are included in firmware version 16.35.3502.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Added new Microsoft Option Rom UEFI CA 2023 secure boot key.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where certain Server Configuration Lock settings cannot be modified by Redfish interface.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information. 

    ]]>         Important Notes:
    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.E for AMD 3rd Generation EPYC processors.
    This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors.
    Firmware Dependencies:
    None
    Problems Fixed:
    Fixed an issue where the iLO firmware version may show incorrectly. 
    Known Issues:
    None

    ]]>         Firmware for the following devices has been updated to 20.42.1000:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.42.1000:

    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 20.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Incorrect MPLS packets discards flow when the GLOBAL pause capability was disabled.
    ]]>         Firmware for the following devices has been updated to 20.41.1000:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.41.1000:

    • Added support for steering match on packet l4_type through FTG/FTE.
    ]]>         No fixes are included in version 20.41.1000.

    ]]>
  • Updated Supported Environments
  • Updated Supported Platforms
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>         Added code signing project ‘SDR_RPM_2024

    ]]>         Support FIPS mode.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixes Maximum Temperature Reporting in system log.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Firmware for the following devices has been updated to 14.32.1900:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.4030:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.

     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 14.32.1010:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.3502:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    New features and changes included in firmware version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.                                                                                                                     

    New features and changes included in firmware version 16.35.3502:

    • Modified the TCP IPv4 flows so that the steering TIR rx_hash_symmetric field is now valid only when both the SRC and DST fields are not set to zero.
    ]]>         The following issues have been fixed in firmware version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.

    No fixes are included in firmware version 16.35.3502.

    ]]>         2024 Sep MSB

    ]]>
  • Added command to support the erasure of logs and events stored in the controller.
  • Added command to support spare spin down policy setting if the feature is supported.
    • ]]>
  • Fixed issue of ADU report generation when using SSADUESXI within the VMWare ESXi system.
  • Fixed the display issue with physical drives in the enclosure under the multipath configuration.
  • Fixed issue where the tool allowed the Heal array operation on RMSED secured arrays when KMS is not active.
  • Fixed issue where the tools would allow users to attempt Change Drive Type operations with 512/512e drives for 4Kn logical volumes.
  • Fixed issue where users specified an incorrect encryption mode for a logical volume that did not match the existing mode on the array.
  • Fixed issue where the operation to revert the SEDs to Original Factory State (OFS) was not being blocked when KMS is not available in remote SED mode.
  • Fixed the volume creation issue when users specify the 'volatileencryptionkey' option while the Controller setting does not support it.
  • Fixed issue of error message occurring when using the 'create type=arrayR0' command with 'drives=' and 'drivetype=' options.
  • Fixed installation issue encountered when attempting to downgrade SSACLI from versions 6.30.X.X to 6.15.X.X or 6.20.X.X.
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Fix the controller library compatible issue.
    • ]]>
  • Fixes the Power Coordination algorithm which ensures the drive will properly negotiate power with SPL-2 and newer compliant controllers.
    • ]]>          

    Updated to version 14.4.329.9

    ]]>          

    Updated to version 14.4.329.9

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.3 guidance.

    Known Issues:

    None

    ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Assert fixes, logging enhancements and all current firmware improvements and bug fixes.
    • ]]>
  • Assert fixes, logging enhancements and all current firmware improvements and bug fixes.
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.N for AMD 1st Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.J for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.M for AMD 1st Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options, navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

     

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of MR controller.

    Addressed an issue where duplicated "Physical Drive missing" may appear in POST and IML.

    Known Issues:

    None

    ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • This firmware revision improves data integrity and reliability by optimizing adjacent track refresh parameters and management of emergency power loss table structure.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in emergency power loss events.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide some minor performance improvements.
    • ]]>
  • This firmware revision improves data integrity and reliability by optimizing adjacent track refresh parameters and management of emergency power loss table structure.
  • The risk of not upgrading to this firmware is the increased possibility of data corruption in emergency power loss events.
  • Several maintenance items are included in this firmware revision that reduce the probability of hangs and provide some minor performance improvements.
    • ]]>         This version is in compliance with IPU.2024.1 guidance.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/22/2024) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    This revision of the Server Platform Services Firmware provides mitigations for security vulnerability documented as CVE-2023-35191. This issue is not unique to HPE servers.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.3 guidance.

    Known Issues:

    None]]>         TBD

    ]]>
  • This product enhances the core-dump missing a few entries.
  • This product enhances the Hardware CoS queue re-configuration between ifdown/ifup.
  • This product enhances to add support for enable/disable RDMA to NCSI command NcsiCmd_Set_Partition_Cfg_cmd function.
  • This product enhances to add support store PLDM Monitoring and Control events before BMC's SetEventReceiver command.
  • This product addresses an issue where Tx timeout detected in dmesg while running L2 traffic with 9600 MTU.
    • ]]>
  • This product addresses an issue where RDE Port LLDPReceive ManagmentAddressMAC returned empty string when it's not present.
  • This product addresses an issue where Ethtool shows wrong module type when a port is in a certain breakout mode.
  • This product addresses an issue where in low temperature test, BMC reading module temperature result is 0xff.
  • This product addresses an issue where failure to set default values for firmware speed capabilities.
  • This product enhances support for loopback port statistics via HWRM (Hardware Resource Manager).
  • This product addresses an issue where flow control status in dmesg shows wrong TX and RX negotiated status.
  • This product addresses an issue where fixed bnxtnvm to verify the VPD data before writing to the NVM.
  • This product addresses an issue where ping failures between allmulticast enabled VFs.
  • This product addresses where the RoCE protocol's read_context function in the HWRM (Hardware Resource Manager) component was failing when dealing with the Completion Queue.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         Important Notes:

    Ver. 0.2.3.0(E) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision E if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 0.2.3.0(C) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         TBD

    ]]>         This product addresses an issue that FCoE Boot Target issue.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Fix for BSOD issue due to SRIS misdetection and FW Commit command via PCIe VDM (MCTP OVER PCIe) timed out.
    • ]]>
  • Fix for BSOD issue due to SRIS misdetection and FW Commit command via PCIe VDM (MCTP OVER PCIe) timed out.
    • ]]>
  • Updated supported environments
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 22.42.1000:

    • Prevented HCA_CAP from allowing rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    • MSI-X on SF can be received now through the PF's MSI-X vector.
    ]]>         The following issues have been fixed in version 22.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • SFF module could not access the EEPROM data when removing the CMIS module and inserting the SFF module instead of it.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 22.41.1000:

    • The new unified_fdb subdomain simplifies the FDB model by eliminating the need to duplicate rules for RX and TX tables. This domain is directionless, meaning no RX/TX specific actions are allowed. Firmware now handles packet transitions IN and OUT of the unified domain, allowing for a more streamlined packet flow management. Software can now transition between unified_fdb and FDB_RX/FDB_TX domains as long as the packet maintains the same direction, without the risk of dropping the packet when crossing between RX and TX.
    • Implemented Deterministic Random Bit Generator (DRBG) algorithm on top of firmware TRNG (the source for raw data input) in accordance with NIST SP800-90A.
    • Added support for vDPA virtual queue state change from suspend to ready, and discrete mkey for descriptor. vDPA Live Migration uses these two new capabilities to reduce downtime since vq can go back to ready state for traffic and descriptor-only-mkey can help reduce mkey mapping time.
    • Added the ability to generate up to 2^30 STE objects through the general object creation command.
    • Added a new NVConfig option to copy AR bit from the BTH header to the DHCP header.
    • Added the option to provide field's offset and length in Steering add_action option.
    • Added support for steering match on packet l4_type through FTG/FTE.
    • Extended Flex Parser merge mechanism to support hardware capabilities.
    • Enabled the option to disable the native parser when the parse graph node is configured with the same conditions.
    • Added support for father/son headers parsing.
    • Added support for tunnel_offload in LRO.
    ]]>         The following issues have been fixed in version 22.41.1000:

    • GTP length field was automatically modified at the TX side when an incorrect or invalid length was detected.
    • Switch port would go down due to MC packets mirrored back to the switch when in promiscuous mode.
    • Traffic failure occurred when modifying the VIRTIO_NET_F_MRG_RXBUF bit for the VDPA device during traffic.
    • The second mkey index returned even if it was not set in the creation of the virtio q when querying virtio q object.
    • Traffic loss occurred after performing Live Migration with virtio vq "frozen-ready" feature.

    Note: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.

    ]]>
  • Added support for Microsoft Windows Sever 2025.
    • ]]>
  • Added support for Microsoft Windows Sever 2022.
    • ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    New features and changes included in version 26.42.1000:

    • Prevented HCA_CAP from allowing rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Removed the logical port rate limiter to prevent the internal loopback traffic from exceeding the physical port network link speed when using the esw scheduling feature.
    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 26.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • The "time_since_last_clear" counter showed wrong indications.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.
     

    New features and changes included in version 26.41.1000:

    • Implemented Deterministic Random Bit Generator (DRBG) algorithm on top of firmware TRNG (the source for raw data input) in accordance with NIST SP800-90A.
    • Added support for vDPA virtual queue state change from suspend to ready, and discrete mkey for descriptor. vDPA Live Migration uses these two new capabilities to reduce downtime since vq can go back to ready state for traffic and descriptor-only-mkey can help reduce mkey mapping time.
    • Added a new NVConfig option to copy AR bit from the BTH header to the DHCP header.
    • Added the option to provide field's offset and length in Steering add_action option.
    • Added support for steering match on packet l4_type through FTG/FTE.
    • Extended Flex Parser merge mechanism to support hardware capabilities.
    • Enabled the option to disable the native parser when the parse graph node is configured with the same conditions.
    • Added support for father/son headers parsing.
    • Added support for tunnel_offload in LRO.
    ]]>         The following issues have been fixed in version 26.41.1000:

    • Traffic failure occurred when modifying the VIRTIO_NET_F_MRG_RXBUF bit for the VDPA device during traffic.
    • The second mkey index returned even if it was not set in the creation of the virtio q when querying virtio q object.
    • Traffic loss occurred after performing Live Migration with virtio vq "frozen-ready" feature.

    Note: When the traffic load is high, and the vq frozen-ready cap is on, traffic loss might still be experienced after modifying the vq from suspend to ready mode.

    ]]>         Added new Microsoft Option Rom UEFI CA 2023 secure boot key.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where certain Server Configuration Lock settings cannot be modified by Redfish interface.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.E for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>         Added support for Microsoft Server Windows 2025

    ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>
  • Fix contains optimization to increase the time for Recovery operation and few checks for maintenance.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.

    •  

    ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.

    •  

    ]]>         Added new Microsoft Option Rom UEFI CA 2023 secure boot key.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where certain Server Configuration Lock settings cannot be modified by Redfish interface.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.E for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>         TBD

    ]]>
  • This product enhances to enable log traces to be added to coredump when dump flag is set.
  • This product enhances to support niccli (Broadcom debug tool) correct version.
  • This product addresses RTNL (Routing Netlink) lock contention issues during firmware reset.
  • This product enhances kTLS（Kernel Transport Layer Security）.
  • This product addresses an issue where an error is observed after unloading the bonding driver and recreating LAG.
  • This product enhances to increase warnings for lldptool being disabled.
  • This product enhances to ethtool-m module operations.
  • This product enhances to handle firmware reset with hardware LAG.
  • This product enhances NIC flow resource cleanup.
  • This product enhances to add the config option to enable/disable the driver debug dump feature.
  • This product enhances to add host logging traces as driver coredump.
  • This product enhances to add hardware LAG support to the bnxt_en L2 driver.
  • This product enhances to keep L2 driver's MSIX mapping persistent.
  • This product enhances to improve ethtool-l pre-set max combined value.
    • ]]>
  • This product fixes the GID table length.
  • This product fixes the computation of current lossless queues.
  • This product fixes incorrect configuration of tsa values.
  • This product fixes QoS info that is not being updated on 2nd PF of a hardware LAG.
  • This product addresses issues related to VF statistics.
  • This product addresses issues related to deadlocks occurring during reset and driver unloading.
  • This product addresses issues where enabling or disabling Truflow was causing resources to be not freed.
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>          

    Updated to version 14.4.329.9

    ]]>          

    Updated to version 14.4.329.9

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         New features and changes included in version 28.42.1000:

    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for configuring PXE boot filters' setting from the HII menu to filter only PXE packets (DHCP, TFTP.ARP,ICMP) during boot on UEFI environment.
    • Added support for Precision Timing (PTM). This new capability ensures seamless operations, synchronized data access, faster response times, and optimal AI performance, enhancing cloud offerings' reliability and scalability.
    • Improved the PTP accuracy for ports with link speed of 25G or above.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    • Added an LT logger that provides visibility of the LT status, process and parameters sent and received during the flow.MSI-X on SF can be received now through the PF's MSI-X vector.
    • Enabled the usage of different TX presets for Link Training (LT), LT timer, and inhibit timer non-SPEC values.
    • Added the PPHCR register (responsible of showing histograms) to the GMP mads flow used to query registers via the mlxlink tool.
    ]]>         The following issues have been fixed in version 28.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • PLDM connector PDR was reported if a cable was not connected which resulted in incomplete data display.
    • An issue that resulted in failure when downgrading to v28.37.1014.
    • Access was allowed to invalid CR-SPACE registers when the adapter cards were secured.
    • An issue that resulted in device assert when using DCBX CEE.
    • An issue that prevented CNP or RTT counters from wrapping around properly.
    • The CR_SPACE was open to any read operation, even though some reads could lock the gateway. Bad reads from CR_SPACE will now result in a bad_access error being returned.
    • An issue that prevented the SFF module from accessing the EEPROM data when removing the CMIS module and inserting the SFF module instead of it.
    ]]>         New features and changes included in version 28.41.1000:

    • Added the TX_SCHEDULER_FWS_REACTIVITY nvconfig flag to solved an mlnx_qos ETS settings issue.
    • Improved ZTR_RTTCC algorithm fairness when running with 4K MTU.
    • Changed BER monitor default values to alarm on symbol and effective BER.
    • Added support for the following prefetch fields on ODP event:

    pre_demand_fault_pages, post_demand_fault_pages.

    • Implemented Deterministic Random Bit Generator (DRBG) algorithm on top of firmware TRNG (the source for raw data input) in accordance with NIST SP800-90A.
    • Added support for PSP in Hardware Steering.
    • Added a new NVConfig option to copy AR bit from the BTH header to the DHCP header.
    • Added the option to provide field's offset and length in Steering add_action option.
    • Added support for steering match on packet l4_type through FTG/FTE.
    • Added support for setting, adding or copying the flow_label fields from the packet.
    • Added support for 64KB pages.

    Note: Configuring BAR_PAGE_ALIGNMENT to ALIGN_64KB(2) while one of the following is configured will cause the device to ignore the BAR_PAGE_ALIGNMENT configuration:

    • PF_NUM_PF_MSIX>256 on any of the Physical Functions
    • VIRTIO_EMULATION_HOTPLUG_TRANS/

    VIRTIO_NET_EMULATION_PF_PCI_LAYOUT/
    VIRTIO_NET_EMULATION_VF_PCI_LAYOUT/
    VIRTIO_BLK_EMULATION_PF_PCI_LAYOUT/
    VIRTIO_BLK_EMULATION_PF_PCI_LAYOUT=VIRTIO_TRANSITIONAL(1)

    • Extended Flex Parser merge mechanism to support hardware capabilities.
    • Enabled the option to disable the native parser when the parse graph node is configured with the same conditions.
    • Added support for father/son headers parsing.
    • Added support for tunnel_offload in LRO.
    ]]>         The following issues have been fixed in version 28.41.1000:

    • Congestion Control malfunctioned due to an invalid database.
    • PLDM command Get Schema URI failed to function properly when there were no base RDE resource IDs.
    • RDE Port resource failed to show 400Gb speed in CapableLinkSpeedGbps and in MaxSpeedGbps in some InfiniBand cards.
    • Fixed a performance issue by enabling CC to allow queues to receive fair bandwidth.
    • VF FLR would get stuck when its PF triggered the FLR as well.
    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         Firmware for the following devices has been updated to 20.42.1000:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.42.1000:

    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 20.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Incorrect MPLS packets discards flow when the GLOBAL pause capability was disabled.
    ]]>         Firmware for the following devices has been updated to 20.41.1000:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.41.1000:

    • Added support for steering match on packet l4_type through FTG/FTE.
    ]]>         No fixes are included in version 20.41.1000.

    ]]>         Updated the kit to version 6.0.0.1-4

    ]]>         Updated the kit to version 6.0.0.1-4

    ]]>         Driver version 5.4.82.1

     

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>
  • This product addressed an issue where Network Interface initialization failure under OS or Firmware rollback may be seen with LLDP enabled.
  • This product addressed an issue where RDE PermanentMACAddress changes simultaneously when send PATCH request for MACAddress property with Firmware 4.30.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Optimize thermal maximum continuous operation temperature values
    • ]]>
  • Optimize thermal maximum continuous operation temperature values
    • ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
  • Assert fixes, logging enhancements and all current firmware improvements.
    • ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
  • Assert fixes, logging enhancements and all current firmware improvements.
    • ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         Added support for:

    RedHat Enterprise Linux 9.5

    Updated to driver version 10.02.12.01-k1

    ]]>         Added support for:

    Red Hat Enterprise Linux 8.10

    Red Hat Enterprise Linux 9.4

    SuSE Linux Enterprise Server 15sp6

    Updated Driver version 10.02.12.01-k1

    ]]>
  • To improve the output format of the NVMe drive health log for the show command.
    • ]]>
  • Fixed an issue where failed drive details were displayed multiple times in the 'show config' output.
  • Fixed incorrect error messages displayed in SSACLI when the modify command threw an error if the 'drive' and 'drivetype' parameters coexisted.
  • Fixed an issue where the array creation command failed when executed with the drives=all and drivetype=sata_hdd parameters.
  • Fixed an issue where the drives behind the enclosures were missing in the SSACLI output.
  • Fixed an issue where users encountered a failure when launching the SSASCRIPTING tool to restore a RAID configuration with an unsupported parameter for PrebootHealthReporting.
  • Fixed an issue causing a digest mismatch or missing digest error when installing SSA tools on Linux systems with FIPS enabled.
    • ]]>
  • To improve the output format of the NVMe drive health log for the show command.
    • ]]>
  • Fixed an issue where failed drive details were displayed multiple times in the 'show config' output.
  • Fixed incorrect error messages displayed in SSACLI when the modify command threw an error if the 'drive' and 'drivetype' parameters coexisted.
  • Fixed an issue where the array creation command failed when executed with the drives=all and drivetype=sata_hdd parameters.
  • Fixed an issue where the drives behind the enclosures were missing in the SSACLI output.
  • Fixed an issue where users encountered a failure when launching the SSASCRIPTING tool to restore a RAID configuration with an unsupported parameter for PrebootHealthReporting.
  • Fixed an issue causing a digest mismatch or missing digest error when installing SSA tools on Linux systems with FIPS enabled.
    • ]]>         Added code signing project SDR_RPM_2024

    ]]>
  • Added support for saving Managed SED master key and reset key in cipher text in controller NVRAM instead of clear text.
  • Changed temperature polling period from 1 minute to 5 minutes for HBA mode drives that are in low power state.
  • Added support for clearing UREs in unmapped LBA range of fault tolerant logical drives.
  • Improved random write and mixed read-write performance.
  • Added support for SED encryption configuration through Redfish interface.
  • Added support of Redfish Chassis implementation for UBM Backplanes.
  • Added Redfish ACTION:
    • Storage.SetEncryptionKey
  • Added support for Redfish property PATCH:
    • Storage.EncryptionMode
    • Storage.HotspareActivationPolicy
    • Drive.HostspareReplacementMode
    • Drive.HotspareType
    • Volume.Encrypted
  • Added support for Redfish Status.Conditions property to resources:
    • Drive
    • Port
    • StorageController
    • StorageController.CacheSummary
    • Volume
  • Added support for Redfish properties:
    • Drive.DriveFormFactor
    • Drive.FirmwareVersion
    • Drive.Manufacture (SAS only)
    • Drive.SlotCapableProtocols
    • StorageController.AssetTag
    • StorageController.Links.PCIeFunction
    • Volume.BlockSizeBytes
    • Volume.LogicalUnitNumber
  • Added support for PLDM Type5 UBM PIC firmware flashing behind expander.
    • ]]>
  • Fixed an issue where the host experienced BSOD while clearing the controller configuration.
  • Fixed controller lockups caused by incorrect address reads and partial RAM initialization for PCIe functions, leading to ECC errors.
  • Fixed issues with external storage.
  • Fixed issues with the SATA drive.
  • Fixed issues with the SED drive.
  • Fixed issues with the spare drive.
  • Corrected MCTP-related issues.
  • Fixed surface scan issues on the RAID 50.
  • Fixed issues encountered during heavy I/O operations.
  • Fixed volume issues on the failed drive.
  • Fixed issues for incorrect Severity reported in Redfish events.
  • Fixed issues for incorrect Status reported in Redfish resources.
  • Fixed an issue with improper capacity information in Redfish drive Name.
  • Fixed an issue where Redfish long running task status is not reported.
  • Fixed an issue where DurableNameFormat for RAID volumes are reported as UUID in RDE READ operations, but should be NAA.
  • Fixed an issue where failed to take ownership of, or to revert, a SED through Redfish.
  • Fixed an issue when a drive hosting a RAID 0 Volume is removed and reinserted, a VolumeOK event is not generated.
    • ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Fix for potential hangs and timeouts, tuning fixes based on field experience and maintenance logging items
    • ]]>
  • Fix for potential hangs and timeouts, tuning fixes based on field experience and maintenance logging items
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Update version
    • ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>
  • Assert fixes, logging enhancements and all current firmware improvements and bug fixes.
    • ]]>
  • Assert fixes, logging enhancements and all current firmware improvements and bug fixes.
    • ]]>         TBD

    ]]>
  • This product enhances RoCE command size trimming.
  • This product enhances driver logging to capture non-supported dual-rate transceiver async errors.
    • ]]>         This product addresses the problem to enabling NPAR+ SRIOV (more than supported VFs through Driver) causes system failure.

    ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Added support for:

    RedHat Enterprise Linux 9.5

    Updated to driver version 10.02.12.01-k1

    ]]>         Added support for:

    Red Hat Enterprise Linux 8.10

    Red Hat Enterprise Linux 9.4

    SuSE Linux Enterprise Server 15sp6

    Updated Driver version 10.02.12.01-k1

    ]]>         TBD

    ]]>
  • This product enhances the abortive cleanup mechanisms for NDSPI interfaces.
  • This product enhances the cleanup of adapter instance structures during driver unloading.
  • This product enhances the cleanup process for NDIS DMA resources when the driver is unloaded.
  • This product enhances event log messaging.
    • ]]>
  • This product fixes the issue of standardized INF keyword failures in the driver’s INF file.
  • This product fixes the issue of static analysis warnings in WMI (Windows Management Instrumentation) string handling for OIDs (Object Identifiers).
  • This product fixes the driver's queue pair suspension state-checking.
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Added support for Microsoft Server Windows 2022.
    • ]]>         The product addressed a probabilistic PSOD when repeatedly doing the OS reboot.

    ]]>         Revise the product name to support ESXi 8.0.

    ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Added support for Microsoft Server Windows 2022.
    • ]]>
  • Provides proactive protection against contamination built up on the media and air-bearing surface of the heads by increased routine “sweeping” of the media surface.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00127593en_us
    • ]]>
  • Provides proactive protection against contamination built up on the media and air-bearing surface of the heads by increased routine “sweeping” of the media surface.
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>         The following enhancement has been added in this version:

    • Added support of RHEL 8.7

    • Added support ofRHEL 9.1 

    • Added support of SLES15 SP4

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         The following enhancement has been added in this version:

    • Added support of Rhel 7.8 

    • Added support of Rhel 8.2 

    • Added support of SLES15 SP2

    ]]>         The following fixes were incorporated in this version:

    • Temperature sensors logic inside gSEP model and SES database
    • When an IOM is pulled the surviving IOM reports false critical temperatures

    Please refer to the Release Notes for the complete listing of fixes, enhancements, known issues and work-arounds corresponding to this firmware.

    ]]>         This product now supports SUSE Linux Enterprise Server 15 SP6.

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Changes and improvements made in 7500 firmware HPK1 over previous firmware HPK0 are to enhance receiver signals by changing the drive’s internal PHY register values on Gen11 x2 direct attached system.
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         Initial version.

    ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
    • ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixes the potential drive hang issue after POH exceed 6.5 years. We suggest customers to update the FW as soon as possible to prevent inconvenience.
  • For more information, refer to HPE Customer Bulletin at the following URL: https://support.hpe.com/hpsc/doc/public/display?docId=a00142174en_us.
    • ]]>         TBD

    ]]>
  • This product enhanced to support log FW Failure Critical Data in Recovery Mode.
  • This product enhanced to support add module parameters pause_rx and pause_tx for Link Flow Control and enable it by default.
    • ]]>         TBD

    ]]>         Added new Microsoft Option Rom UEFI CA 2023 secure boot key.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where certain Server Configuration Lock settings cannot be modified by Redfish interface.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.E for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Fix for BSOD issue due to SRIS misdetection and FW Commit command via PCIe VDM (MCTP OVER PCIe) timed out.
    • ]]>
  • Fix for BSOD issue due to SRIS misdetection and FW Commit command via PCIe VDM (MCTP OVER PCIe) timed out.
    • ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
    • ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
    • ]]>         TBD

    ]]>
  • This product addressed an issue where Network Interface initialization failure under OS or Firmware rollback may be seen with LLDP enabled.
  • This product addressed an issue where RDE PermanentMACAddress changes simultaneously when send PATCH request for MACAddress property with Firmware 4.30.
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
  • Assert fixes, logging enhancements and all current firmware improvements.
    • ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
  • Assert fixes, logging enhancements and all current firmware improvements.
    • ]]>         Added support for:

    RedHat Enterprise Linux 9.5

    Updated to driver version 10.02.12.01-k1

    ]]>         Added support for:

    Red Hat Enterprise Linux 8.10

    Red Hat Enterprise Linux 9.4

    SuSE Linux Enterprise Server 15sp6

    Updated Driver version 10.02.12.01-k1

    ]]>
  • Driver update
  • Updated supported platforms
    • ]]>
  • Driver update
    • ]]>         Updated to driver version 14.4.313.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022


     

     

    ]]>         Updated to driver version 14.2.537.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019

    ]]>         TBD

    ]]>         This product correct an issue which fixed PSOD that keep DRSS module parameter disabled.

    ]]>         Support new Gen12 servers.

    ]]>         Support new ML110 and DL560 Gen11 servers

    ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         TBD

    ]]>         TBD

    ]]>
  • This product enhances the Get Package Status command support.
  • This product enhances to add a warning message when a non-supported dual-rate transceiver is used.
  • This product enhances the Addition of SFF 8472 Transceiver Power Details to RDE Port Metrics.
    • ]]>
  • This product addresses an issue where getting Transceiver Temperature erroneous unit value.
  • This product addresses an issue when NC-SI Query Pending NC PLDM Response is wrong when NIC does not have a pending PLDM request.
    • ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>         This product enhanced the compatibility with the latest drivers.

    ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>
  • To fix - Frequent insertion of low priority commands during IO execution may lead to drive offline randomly.
    • ]]>
  • Latest firmware updates including one assert fix, power, and power cycle enhancements.
  • Initial firmware release for model VO007680RYEWD, 7.68TB drive.
    • ]]>         TBD

    ]]>
  • This product enhances to update the install section for Device ID mapping to enable the missing configuration.
  • This product enhances to compile with WDK (Windows Driver Kit) 26080.
  • This product enhances to update project makefile and INF file for compilation with the new toolchain.
    • ]]>         TBD

    ]]>         This product fixed BSOD event not being detected when collecting mstdump on BUGCHECK while the device was already down.

    ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>         Updated some Japanese translation.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of an MR controller.

    Addressed an issue that Battery Failure IML message log may be incorrectly logged for MR Controller with Smart Storage Battery.

    Addressed an issue where system failed to boot with selected NVMe HDD by setting One-Time Boot Option in ILO Web.

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None

    ]]>         Updated some Japanese translation.

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of an MR controller.

    Addressed an issue that Battery Failure IML message log may be incorrectly logged for MR Controller with Smart Storage Battery.

    Addressed an issue where system failed to boot with selected NVMe HDD by setting One-Time Boot Option in ILO Web.

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.00

    09.15.00

    7.36

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.00

    09.15.00

    7.36

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.10.00 09.15.00 7.36 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.10.00 09.15.00 7.36 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.02.05

    9.14.00

    7.25

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.02.05

    9.14.00

    7.25

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.02.05

    9.14.00

    7.25

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.02.05

    9.14.00

    7.25

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.09.07

    09.14.01

    7.36

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.09.07

    09.14.01

    7.36

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.09.07 09.14.01 7.36 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.09.07 09.14.01 7.36 0.0
    ]]>         Initial Build

    ]]>         Initial build

    ]]>
  • Support for PIN-based iLO5 onboarding into COM instead of PCID.
    • ]]>
  • Fixed an issue where HPE iLO RIBCL queries generated incorrect CAPACITY VALUE responses.
  • Fixed an issue where fetching the email details of an LDAP user where DistinguishedName containing special characters were causing the two-factor authentication process to fail.
  • Fixed an issue where the hpsetup/secureflash engine reports the HPE iLO 5 firmware update as a failure.
  • Fixed an issue where Xilinx XtremeScale X2522-25G cards drop from HPE iLO health monitoring.
  • Fixed the cpqHoMIBStatusArray status issue that did not get updated with proper details when a drive attached to HPE Smart Array P408i-a SR controller failed or degraded.
  • Fixed an incorrect AMS status (Not Available) that appeared on the HPE iLO interfaces while operating system indicated AMS status as running.

    •  

    ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>         TBD

    ]]>         This product updated the copyright information and compatibility with firmware

    ]]>         Important Notes:

    Ver. 1.1.4(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.1.4. It is not necessary to upgrade with Revision C if a previous component revision was used to upgrade the firmware to version 1.1.4.

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    For HPE ProLiant Gen10 Plus servers, iLO5 version 2.55 or above is required to upgrade to this version.

    Enhancements/New Features:

    Changed certain behaviors to avoid machine power failures when significant power consumption devices are introduced.

    Problems Fixed:

    None

    Known Issues:

    None

    ]]>         Added new Microsoft Option Rom UEFI CA 2023 secure boot key.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where certain Server Configuration Lock settings cannot be modified by Redfish interface.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.E for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Updated to version 1.0.0.1

    ]]>         Updated to version 1.0.0.1

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         MFT prerequisite RPMs for Mellanox adapter firmware update in Secure Boot mode.

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>
  • This product enhances to support RoCE loopback traffic with TF enable.
  • This product enhances appropriate log messages when roce traffic is started on a lossy queue.
  • This product enhances to increase RoCE logger buffer size to 32MB.
    • ]]>
  • This product fixes the memory allocator warning caused by RoCE driver.
  • This product fixes mutex dead lock issue when loading/unloading the bonding and bnxt_re drivers.
  • This product fixes incorrect message observed after pci removal-rescan when LAG is created.
    • ]]>
  • Fix for BSOD issue due to SRIS misdetection and FW Commit command via PCIe VDM (MCTP OVER PCIe) timed out.
    • ]]>
  • Fix for BSOD issue due to SRIS misdetection and FW Commit command via PCIe VDM (MCTP OVER PCIe) timed out.
    • ]]>
  • This product now supports SUSE Linux Enterprise Server 15 SP6.
  • This product now supports ethtool flow-type ether.
  • This product now adds VF reset on Tx Malicious Driver Detection(MDD) event.
  • This product now supports kernel's DPLL configuration.
    • ]]>         This product now supports Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK NG Adapter for HPE.

    ]]>
  • This is a maintenance release that contains code improvements for CAP.TO and LED behavior.
    • ]]>          This is an initial FW.

    ]]>
  • Added Windows 2025 Support
    • ]]>
  • Update build environment with SHA384
    • ]]>         TBD

    ]]>
  • This product addressed an issue where Network Interface initialization failure under OS or Firmware rollback may be seen with LLDP enabled.
  • This product addressed an issue where RDE PermanentMACAddress changes simultaneously when send PATCH request for MACAddress property with Firmware 4.30.
  • This product addressed an issue where data is interchanged of Port 1 and Port 4 ​when ​running ​a ​Redfish GET ​Operation ​under ​the NetworkAdapter, ​NetworkDeviceFunctions and Port ​Schema ​with ​"Metrics" ​properties.
    • ]]>         TBD

    ]]>
  • This product enhances to support for more Linux distributions.
  • This product enhances to implement compact code to handle the kernel DMA API for tg3.
    • ]]>         TBD

    ]]>
  • This product fixed interface cleanup when driver unload.
  • This product fixed failed connect with Windows GRE VPN client under VM configured.
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Improve the FW about data mismatch after SPL
    • ]]>
  • Improve the FW about data mismatch after SPL
    • ]]>         Firmware for the following devices has been updated to 14.32.1900:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.4030:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    No new features or changes have been included in firmware version 14.32.1900.

     

    New features and changes included in firmware version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No fixes have been included in firmware version 14.32.1900.

     

    The following issues have been fixed in firmware version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 14.32.1010:

    • 817749-B21 (HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter)
    • 817753-B21 (HPE Ethernet 25Gb 2-port 640SFP28 Adapter)

    Firmware for the following device has been updated to 16.35.3502:

    • 874253-B21 (HPE Ethernet 100Gb 1-port 842QSFP28 Adapter)

    New features and changes included in firmware version 14.32.1010:

    • Added 3 new assert filters (Health buffer, NVlog, FW trace). The assert will be exposed now if its severity level is equal to or above the new filter.
    • Enabled Rate Limit per VM instead of VM-TC. This capability is implemented by adding support to a new Scheduling element type: rate limit elements that will connect to the rate_limit and will share its  rate limit.
    • Added support for asymmetrical VFs per PF. To enable it:PF_NUM_OF_VF_VALID must be true, and PF_NUM_OF_VF to a non-zero value.
    • Limited the external loopback speed to the used module's capabilities.
    • Improved linkup time when using the fast linkup capability.
    • Added support for the slow_restart and slow_restart_idle parameters to enable Zero Touch RoCE capability.                                                                                                                     

    New features and changes included in firmware version 16.35.3502:

    • Modified the TCP IPv4 flows so that the steering TIR rx_hash_symmetric field is now valid only when both the SRC and DST fields are not set to zero.
    ]]>         The following issues have been fixed in firmware version 14.32.1010:

    • Firmware got into an unresponsive state and caused unexpected behavior when connecting an optical transceiver that support RxLOS and the remote side port was down.
    • The system could not create more than 128K QPs.
    • On rare occasions, the system got into an unresponsive state when a peer port went down while using an Optical module.
    • Packet Pacing rate was used if asymmetric VFs was enabled.
    • Incorrect RNR timeout when trying to set it during the rts2rts_qp transition.
    • Issue with RSS on IPSec flows in ConnectX-4 Lx led to performance degradation. In this scenario, the SPI optimization caused packets from a given host to hash to the same CPU core. The fix was to ignore SPI optimization according to l4_type in ConnectX-4 Lx adapter cards.
    • The GetInventory NC-SI command reported leading 0xf in firmware version when it started with 0.

    No fixes are included in firmware version 16.35.3502.

    ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>
  • Fix component SAS core dump issue which along with NVMe drives behind MR controllers on certain platform flashing.
  • Fix NVMe drive component failed to update problem behind more than 2 MR controllers on certain platform.
  • Fix NVMe drive component which shows wrong behavior message against the flash result.
  • Fix SPP force upgrade flash component problem on certain drive family.
    • ]]>         SR 2.9.0/SR 3.4.0 RC

    ]]>
  • Fixed the inconsistent I/O errors observed in MPIO enabled physical drives during cable plug/unplug events in multipath scenarios.
    • ]]>         TBD

    ]]>
  • This product enhances to enable log traces to be added to coredump when dump flag is set.
  • This product enhances to support niccli (Broadcom debug tool) correct version.
  • This product addresses RTNL (Routing Netlink) lock contention issues during firmware reset.
  • This product enhances kTLS（Kernel Transport Layer Security）.
  • This product addresses an issue where an error is observed after unloading the bonding driver and recreating LAG.
  • This product enhances to increase warnings for lldptool being disabled.
  • This product enhances to ethtool-m module operations.
  • This product enhances to handle firmware reset with hardware LAG.
  • This product enhances NIC flow resource cleanup.
  • This product enhances to add the config option to enable/disable the driver debug dump feature.
  • This product enhances to add host logging traces as driver coredump.
  • This product enhances to add hardware LAG support to the bnxt_en L2 driver.
  • This product enhances to keep L2 driver's MSIX mapping persistent.
  • This product enhances to improve ethtool-l pre-set max combined value.
    • ]]>
  • This product fixes the GID table length.
  • This product fixes the computation of current lossless queues.
  • This product fixes incorrect configuration of tsa values.
  • This product fixes QoS info that is not being updated on 2nd PF of a hardware LAG.
  • This product addresses issues related to VF statistics.
  • This product addresses issues related to deadlocks occurring during reset and driver unloading.
  • This product addresses issues where enabling or disabling Truflow was causing resources to be not freed.
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>
  • New release for version 7.728.02.00.
    • ]]>
  • Fix an issue that controller may stuck in boot state and cause unexpected controller reset when there is OCR (online controller reset). OCR can happen when doing online firmware update.
    • ]]>
  • New release for version 7.728.02.00.
    • ]]>
  • Fix an issue that controller may stuck in boot state and cause unexpected controller reset when there is OCR (online controller reset). OCR can happen when doing online firmware update.
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         Added new Microsoft Option Rom UEFI CA 2023 secure boot key.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where certain Server Configuration Lock settings cannot be modified by Redfish interface.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.E for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>         This product fixes warning message: index 1 is out of range.

    ]]>
  • This product now adds more trace events related to SFP module IOCTLs.
  • This product now adds Red Hat Enterprise Linux 9 update 4.
    • ]]>
  • This product fixes an issue where the driver will honor user IRQ affinity settings.
  • This product fixes an issue where the VF may be used uninitialized in the function warning.
    • ]]>         Firmware for the following devices has been updated to 20.42.1000:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.42.1000:

    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 20.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Incorrect MPLS packets discards flow when the GLOBAL pause capability was disabled.
    ]]>         Firmware for the following devices has been updated to 20.41.1000:

    • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe3 x16 MCX653105A-HDAT Adapter - P06154-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe3 x16 MCX653105A-ECAT Adapter - P06250-B21
    • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe3 x16 MCX653106A-ECAT Adapter - P06251-B21

    Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.41.1000:

    • Added support for steering match on packet l4_type through FTG/FTE.
    ]]>         No fixes are included in version 20.41.1000.

    ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Improvement in mixed READ/WRITE performance, which was causing a field issue at an HPE customer - Improve random mix performance in TL=2048k and 512k
    • ]]>
  • Improvement in mixed READ/WRITE performance, which was causing a field issue at an HPE customer - Improve random mix performance in TL=2048k and 512k
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Fix for SAS core dump issue in specific configuration.
    • ]]>          

    Updated to version 14.4.329.9

    ]]>          

    Updated to version 14.4.329.9

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of an MR controller.

    Addressed an issue where WHLK HSTI test failed.

    Addressed an issue where the "Physical Drive missing" message appears twice in POST when a drive was removed and rebooted with incorrect severity in IML.

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options and navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Addressed an issue where system may encounter an RSOD while updating the SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of an MR controller.

    Addressed an issue where WHLK HSTI test failed.

    Addressed an issue where the "Physical Drive missing" message appears twice in POST when a drive was removed and rebooted with incorrect severity in IML.

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options and navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Addressed an issue where system may encounter an RSOD while updating the SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None

    ]]>         TBD

    ]]>         This product added a warning message when RDMA critical error occurs.

    ]]>         This product fixed an issue which NIC port was in autonegotiation mode, many DOWN/UP sequences was applied by the link partner, and NIC port remained in DOWN state randomly.

    ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
    • ]]>
  • Fix for unrecovered errors which may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4 and Columbiaville 4.4.

    ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
  • Assert fixes, logging enhancements and all current firmware improvements.
    • ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
  • Assert fixes, logging enhancements and all current firmware improvements.
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>         This product corrects an issue where the adapter may go offline after firmware is flashed, but before reboot.

    ]]>         New features and changes included in version 28.42.1000:

    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for configuring PXE boot filters' setting from the HII menu to filter only PXE packets (DHCP, TFTP.ARP,ICMP) during boot on UEFI environment.
    • Added support for Precision Timing (PTM). This new capability ensures seamless operations, synchronized data access, faster response times, and optimal AI performance, enhancing cloud offerings' reliability and scalability.
    • Improved the PTP accuracy for ports with link speed of 25G or above.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    • Added an LT logger that provides visibility of the LT status, process and parameters sent and received during the flow.MSI-X on SF can be received now through the PF's MSI-X vector.
    • Enabled the usage of different TX presets for Link Training (LT), LT timer, and inhibit timer non-SPEC values.
    • Added the PPHCR register (responsible of showing histograms) to the GMP mads flow used to query registers via the mlxlink tool.
    ]]>         The following issues have been fixed in version 28.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • PLDM connector PDR was reported if a cable was not connected which resulted in incomplete data display.
    • An issue that resulted in failure when downgrading to v28.37.1014.
    • Access was allowed to invalid CR-SPACE registers when the adapter cards were secured.
    • An issue that resulted in device assert when using DCBX CEE.
    • An issue that prevented CNP or RTT counters from wrapping around properly.
    • The CR_SPACE was open to any read operation, even though some reads could lock the gateway. Bad reads from CR_SPACE will now result in a bad_access error being returned.
    • An issue that prevented the SFF module from accessing the EEPROM data when removing the CMIS module and inserting the SFF module instead of it.
    ]]>         Features included in version 28.41.1000:

     

    • Added the TX_SCHEDULER_FWS_REACTIVITY nvconfig flag to solved an mlnx_qos ETS settings issue.
    • Improved ZTR_RTTCC algorithm fairness when running with 4K MTU.
    • Changed BER monitor default values to alarm on symbol and effective BER.
    • Added support for the following prefetch fields on ODP event:

    pre_demand_fault_pages, post_demand_fault_pages.

    • Implemented Deterministic Random Bit Generator (DRBG) algorithm on top of firmware TRNG (the source for raw data input) in accordance with NIST SP800-90A.
    • Added support for 400GbE speed (8X50G) in Single-Port OSFP adapter cards including link training and auto-negotiation when connecting OSFP to OSPF-RHS cables.
    • Added support for PSP in Hardware Steering.
    • Added a new NVConfig option to copy AR bit from the BTH header to the DHCP header.
    • Added the option to provide field's offset and length in Steering add_action option.
    • Added support for steering match on packet l4_type through FTG/FTE.
    • Added support for setting, adding or copying the flow_label fields from the packet.
    • Added support for 64KB pages.

    Note: Configuring BAR_PAGE_ALIGNMENT to ALIGN_64KB(2) while one of the following is configured will cause the device to ignore the BAR_PAGE_ALIGNMENT configuration:

    • PF_NUM_PF_MSIX>256 on any of the Physical Functions
    • VIRTIO_EMULATION_HOTPLUG_TRANS/

    VIRTIO_NET_EMULATION_PF_PCI_LAYOUT/
    VIRTIO_NET_EMULATION_VF_PCI_LAYOUT/
    VIRTIO_BLK_EMULATION_PF_PCI_LAYOUT/
    VIRTIO_BLK_EMULATION_PF_PCI_LAYOUT=VIRTIO_TRANSITIONAL(1)

    • Extended Flex Parser merge mechanism to support hardware capabilities.
    • Enabled the option to disable the native parser when the parse graph node is configured with the same conditions.
    • Added support for father/son headers parsing.
    • Added support for tunnel_offload in LRO.
    ]]>         The following issues have been fixed in version 28.41.1000:

    • Initial release
    ]]>         .

    ]]>
  • Added support for VMware 8.0
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>
  • Fixes an issue in previous version where the Inquiry model number is reported incorrectly for first few seconds after the drive is powered on
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         TBD

    ]]>
  • This product enhances to support for more Linux distributions.
  • This product enhances to implement compact code to handle the kernel DMA API for tg3.
    • ]]>         Important Notes:

    Ver. 0.2.3.0(B) contains updates to the firmware packaging and is functionally equivalent to ver. 0.2.3.0. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 0.2.3.0.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours. On some systems this could result in a brief drop in CPU utilization or network traffic lasting less than a second.

    Known Issues:

    None

    ]]>         Updated to version 1.0.0.0-4

    This Component is FIPs enabled.

    ]]>         This Component is FIPs enabled.

    ]]>         Updated to version 1.0.0.0-4

    This Component is FIPs enabled.

    ]]>         This Component is FIPs enabled.

    ]]>
  • The product addressed a probabilistic PSOD when repeatedly doing the OS reboot.
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving the configuration page of an MR controller.

    Addressed an issue where Windows Server 2025 HLK TPM2.0 UEFI Preboot Interface test failed on XL450 Gen10.

    Addressed an issue where WHLK HSTI test failed.

    Addressed an issue where the "Physical Drive missing" message appears twice in POST when a drive was removed and rebooted with incorrect severity in IML.

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options and navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Addressed an issue where system may encounter an RSOD while updating the SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes the mitigation for security vulnerabilities CVE-2023-45229, CVE-2022-36763, CVE-2022-36764, CVE-2021-38578, CVE-2023-5678 and CVE-2024-0727. The security vulnerabilities are documented in the CVE report site. They are not unique to HPE servers. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 05.01.04.913.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    Added value "C6 without C1E" in System Configuration (RBSU) option "Power Management/Advanced Power Options menu/Minimum Processor Idle Power Core C-State". When selected, the Minimum Processor Idle Power Core C-State is C6 with C1E disabled. This setting has the following Redfish property: /redfish/v1/systems/1/bios/MinProcIdlePower

    Known Issues:

    None]]>
  • Addresses a hot plug reporting concern
  • Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration
  • Remove Background Media Scan (BMS) with Super parity and Directed Offline Scan (DOS)
    • ]]>
  • Addresses a hot plug reporting concern
  • Increased the buffer memory size used for sequential write data to resolve performance degradation seen in a RAID60 configuration
    • ]]>         Updated to version 1.0.0.1

    ]]>         This product enhances libfwupg to improve NVRAM configuration updates.

    ]]>
  • This product fixes an issue where a dummy Serial Number is seen immediately after update the adapter firmware to version 2.30 (or earlier).
  • This product fixes an issue where Wake-on-LAN not working is seen.
    • ]]>
  • This product addresses a problem that might cause a BSOD when trying to reboot the system from operating Windows systems due to NIC internal software mutex problem.
  • This product addresses an issue where a random missing DHCP IP address occurs when the iLO shared NIC port is used, due to NIC internal software mutex problem.
  • This product addresses an issue that might cause the POST to get stuck due to NIC internal software mutex problem.
    • ]]>
  • Firmware maintenance release of Samsung M.2 NVMe SSD with HPK3
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.N for AMD 1st Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.J for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.M for AMD 1st Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options, navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of MR controller.

    Addressed an issue where duplicated "Physical Drive missing" may appear in POST and IML.

    Known Issues:

    None]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added Windows 2025 Support
    • ]]>         Support SHA384

    ]]>         Added new details for surface analysis

    ]]>
  • Updated supported environments
  • Updated supported platforms
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This version of the SPS should be paired with System ROM 2.00 (02/01/2024) or later.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2024.1 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.3 guidance.

    Known Issues:

    None

    ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>         This product enhanced the compatibility with the latest drivers.

    ]]>
  • Fix for BSOD issue due to SRIS misdetection and FW Commit command via PCIe VDM (MCTP OVER PCIe) timed out.
    • ]]>
  • Fix for BSOD issue due to SRIS misdetection and FW Commit command via PCIe VDM (MCTP OVER PCIe) timed out.
    • ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.4030:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

    No new Features and changes included in version 12.28.2302.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No new fixes have been added in version 12.28.2302.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 12.28.2006:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.3006:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

    New features and changes included in version 1.0.0.15:

    • Added firmware flash support on Microsoft Windows Server 2025.

    New Features and changes included in version 12.28.2006:

    • Increased the maximum XRQ number to 512.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in firmware version 12.28.2006:

    • Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
    • Increased PHY power consumption limit to 1.5w.
    • Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>
  • Fix for potential hangs and timeouts, tuning fixes based on field experience and maintenance logging items
    • ]]>
  • Fix for potential hangs and timeouts, tuning fixes based on field experience and maintenance logging items
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Fixes an intermittent issue where the incorrect model number can be reported during spin-up
    • ]]>
  • Added support for Microsoft Server Windows 2022.
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with the new firmware.

    ]]>          

    • Added support for Microsoft Server Windows 2025.
    ]]>
  • Added support for Microsoft Server Windows 2022.
    • ]]>
  • Add FirmwareVersion for Drive redfish property
  • Add StorageController.AssetTag
  • Add [Status][Condition] for redfish
  • Add AutoVolumeCreate
    • ]]>
  • Fixed an issue where NS boot controller fails to establish MCTP communication with iLO on Intel Gen12 platform and AMD Turin 365/385
  • Fixed an issue where improper drive slot number is shown in IML logs
  • Fixed an issue where Activity LED is ON when the drive is not under a RAID
  • Fixed an issue Volume shows failure when the Volume is reset to default
  • Fixed an issue Drives Failed to Show Rebuild operation and Percentage in ILO and Redfish intermittently
  • Fixed an issue that Drive is not getting detected after Hot-Plug
  • Fixed the Severity level in IML/Redfish Event logs when Unsupported/Incompatible drives are hot added
  • Fixed Location Indicator LED functions
  • Corrected the drive state and controller health roll-up severity when a drive is removed
  • Fixed NQN number format
    • ]]>
  • Add FirmwareVersion for Drive redfish property
  • Add StorageController.AssetTag
  • Add [Status][Condition] for redfish
  • Add AutoVolumeCreate
    • ]]>
  • Fixed an issue where NS boot controller fails to establish MCTP communication with iLO on Intel Gen12 platform and AMD Turin 365/385
  • Fixed an issue where improper drive slot number is shown in IML logs
  • Fixed an issue where Activity LED is ON when the drive is not under a RAID
  • Fixed an issue Volume shows failure when the Volume is reset to default
  • Fixed an issue Drives Failed to Show Rebuild operation and Percentage in ILO and Redfish intermittently
  • Fixed an issue that Drive is not getting detected after Hot-Plug
  • Fixed the Severity level in IML/Redfish Event logs when Unsupported/Incompatible drives are hot added
  • Fixed Location Indicator LED functions
  • Corrected the drive state and controller health roll-up severity when a drive is removed
  • Fixed NQN number format
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>
  • Support Non-Hotplug configurations
  • Add Transport Level Retries (TLR) LTO Tape Drive support
  • Enhance MR controller logging to include PL (protocol layer) logs from initial
  • discovery at Start of the day to address Drive lost across reboots
    • storcli /cx show captureSodPlLogs
    • storcli /cx set captureSodPlLogs=<on|off>
    • ]]>         Support HPE ProLiant DL145 Gen11 server.

    ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         See the AMS Release Notes for information about the enhancements in this release.

    ]]>         See the AMS Release Notes for information about the issues resolved in this release.

    ]]>         Update maximum continuous operation temperature values for host thermal management and reporting.

    ]]>         TBD

    ]]>
  • This product enhances to add an optional param for CRC (Cyclic Redundancy Check) command to skip the auto fix.
  • This product enhances NVRAM configuration during the firmware upgrade.
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.4.329.10

    14.4.329.10

    14.4.329.9

    14.4.290.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.4.329.10 14.4.329.10 14.4.329.9 14.4.290.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.4.329.10 14.4.329.10 14.4.329.9 14.4.290.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1200E 16Gb Dual Port Fibre Channel Host Bus Adapter

    16Gb

    14.2.589.21

    14.2.589.21

    14.2.589.16

    14.2.566.0

    HPE SN1200E 16Gb Single Port Fibre Channel Host Bus Adapter

    16Gb

    14.2.589.21

    14.2.589.21

    14.2.589.16

    14.2.566.0

    HPE SN1600E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.21

    14.2.589.21

    14.2.589.16

    14.2.566.0

    HPE SN1600E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.21

    14.2.589.21

    14.2.589.16

    14.2.566.0

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.19

    14.2.589.19

    14.2.589.16

    14.2.566.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.19

    14.2.589.19

    14.2.589.16

    14.2.566.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.2.589.19 14.2.589.19 14.2.589.16 14.2.566.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.2.589.19 14.2.589.19 14.2.589.16 14.2.566.0
    ]]>
  • Fix contains code improvements for SMART reporting.
    • ]]>
  • HPG4 implements a change in Background Media Scan triggering threshold based on a unique retention characteristic to help address a Predictive Failure.
  • For the drives reporting the predictive failure, please update to HPG4 and please power cycle the server or re-seat the drives to clear the predictive failure record  after one full Media Scan (10 days). Media Scan in HPG4 will scrub error during these 10 days.
  • For the drives that do not report the PF, you can update to HPG4 directly without power cycle the server or drives.
  • For more information, refer to HPE Customer Advisory at the following URL: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00124896en_us

    •  

    ]]>         TBD

    ]]>         This product updated the copyright information and compatibility with firmware

    ]]>         This product fix an issue that TCP traffic on VMs might be interrupted if PF undergoes a reset.

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios

    HPE SN1100Q 16GB Dual Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1100Q 16GB Single Port PCIe Fibre Channel Host Bus Adapter

    16Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.04.01

    9.15.00

    7.25

    3.68

    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.00

    09.15.00

    7.36

    0.0

    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    02.10.00

    09.15.00

    7.36

    0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.10.00 09.15.00 7.36 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.10.00 09.15.00 7.36 0.0
    ]]>         Fixed the following behavior:

    Temperature Misreading: the adapter was reading incorrect reading of the temperature on the HPE SN1610Q 32Gb Fibre Channel Host Bus adapter's Small Form-factor Pluggable. The symptom would result in a temperature spike and potentially reset the system

     

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.N for AMD 1st Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Known Issues:

    None]]>         Important Notes:

    This revision of the System ROM includes AMD reference code RomePI 1.0.0.J for AMD 2nd Generation EPYC processors. This revision of the System ROM includes AMD reference code NaplesPI 1.0.0.M for AMD 1st Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options, navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of MR controller.

    Addressed an issue where duplicated "Physical Drive missing" may appear in POST and IML.

    Known Issues:

    None]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         TBD

    ]]>
  • This product enhances the abortive cleanup mechanisms for NDSPI interfaces.
  • This product enhances the cleanup of adapter instance structures during driver unloading.
  • This product enhances the cleanup process for NDIS DMA resources when the driver is unloaded.
  • This product enhances event log messaging.
    • ]]>
  • This product fixes the issue of standardized INF keyword failures in the driver’s INF file.
  • This product fixes the issue of static analysis warnings in WMI (Windows Management Instrumentation) string handling for OIDs (Object Identifiers).
  • This product fixes the driver's queue pair suspension state-checking.
    • ]]>         Added new Microsoft Option Rom UEFI CA 2023 secure boot key.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where certain Server Configuration Lock settings cannot be modified by Redfish interface.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.E for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Ver. 04.01.05.002(B) contains updates to the firmware packaging and is functionally equivalent to ver. 04.01.05.002. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 04.01.05.002.

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.3 guidance.

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.3 guidance.

    Known Issues:

    None

    ]]>         This product now sets the minimum number of allocated queues to 4.

    ]]>         This product fixes the ethtool set_channles timeout when RDMA is loaded.

    ]]>         This product now supports Red Hat Enterprise Linux 8 update 10.

    ]]>
  • This product fixes an issue where VLAN set operation may leads to deadlock.
  • This product fixes an issue where a NULL pointer dereference in early reset.
  • This prodcut fixes an issue where users fail to change the number of queues (channels).
  • This product fixes an issue where system hang when VFs are created and VLAN configured.
    • ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>
  • Support Gen12 servers.
    • ]]>         For Gen11 PR3 & 2023 March MSB

    ]]>          

    This product enhanced the compatibility with the latest drivers.

    ]]>         This product enhanced the compatibility with the latest drivers.

    ]]>
  • Updated supported environments
    • ]]>
  • Updated SBOM requirement
    • ]]>         irmware for the following devices has been updated to 12.28.2302:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.3006:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)

     

    Security Hardening Enhancements
    This release contains important reliability improvements and security hardening enhancements. NVIDIA recommends upgrading your devices firmware to this release to improve the devices’ firmware security and reliability.
     

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No new issues have been fixed in version 12.28.2302.
     

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         irmware for the following devices has been updated to 12.28.2006:

    • 843400-B21 (HPE Apollo A10 InfiniBand EDR (100Gb) 2-port Adapter)
       

    Firmware for the following devices has been updated to 16.35.3006:

    • 872723-B21 (HPE Apollo InfiniBand EDR 100Gb 2-port 841z Mezzanine Adapter)
    • 872725-B21 (HPE InfiniBand EDR 100Gb 1-port 841QSFP28 Adapter)

     

    New features and changes included in version 12.28.2006:

    • Increased the maximum XRQ number to 512.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in firmware version 12.28.2006:

    • Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
    • Increased PHY power consumption limit to 1.5w.
    • Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Driver version 5.3.83.1

    ]]>         Driver version 5.3.82.0

    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.42.1000:

    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 20.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Incorrect MPLS packets discards flow when the GLOBAL pause capability was disabled.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.41.1000:

    • Added support for steering match on packet l4_type through FTG/FTE.
    ]]>         No fixes are included in version 20.41.1000.

    ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of Fortville 9.4.

    ]]>         This product corrects an issue where the adapter may go offline after firmware is flashed, but before reboot.

    ]]>         NMST version 4.25.0.703

     

    This version is supported on VMware ESXi 7.0 Update 3 only.

    ]]>         The following changes have been made in version 2023.08.01:

    • Added support to ESXi 8.0.

     

     

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Optimize thermal maximum continuous operation temperature values.

    ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Fixed flashing issue through SDR method.
    • ]]>
  • Fixed flashing issue through SDR method.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>
  • Maintenance firmware release to introduce fixes from previous firmware.
    • ]]>         Added new Microsoft Option Rom UEFI CA 2023 secure boot key.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where certain Server Configuration Lock settings cannot be modified by Redfish interface.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:
    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.E for AMD 3rd Generation EPYC processors.
    This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors.
    Firmware Dependencies:
    None
    Problems Fixed:
    Fixed an issue where the iLO firmware version may show incorrectly. 
    Known Issues:
    None

    ]]>         This product fixes the kernel compilation issue.

    ]]>         This product now supports Red Hat Enterprise Linux 9 update 4.

    ]]>         This product fixes an issue where the driver will honor user IRQ affinity settings.

    ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>
  • Updated SBOM requirement
    • ]]>
  • Update version
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Added support for Microsoft Server Windows 2022.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.3 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with Intel IPU.2023.3 guidance.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains updates aligned with the Intel Product Update (IPU) version IPU.2023.1 guidance.

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This version is in compliance with IPU.2023.1 guidance.

    Known Issues:

    None

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed an issue where the driver incorrectly handled multi-path failover.
  • Fixed an issue where the driver could hang under heavy I/O load.
    • ]]>
  • Fixed an issue where the driver incorrectly handled multi-path failover.
  • Fixed an issue where the driver could hang under heavy I/O load.
    • ]]>
  • Added support for Microsoft Windows Server 2025.
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.42.1000:

    • Added a new command interface "Memory slow release" to enable/disable holding memory pages for a defined period of time. Once the timer expires, the firmware will return the pages to the driver.
    • Added support for MVTS register via a miscellaneous driver using the access_register PRM command.
    ]]>         The following issues have been fixed in version 20.42.1000:

    • RDE PortMetrics property Transceivers.SupplyVoltage was reflected in incorrect units of 100uV instead of V.
    • HCA_CAP allowed rogue drivers to create more EQs than the number allowed in the HCA_CAP.max_num_eqs.
    • Incorrect MPLS packets discards flow when the GLOBAL pause capability was disabled.
    ]]>         Security Hardening Enhancements: This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device's firmware to this release to improve the firmware security and reliability of your device.

     

    New features and changes included in version 20.41.1000:

    • Added support for steering match on packet l4_type through FTG/FTE.
    ]]>         No fixes are included in version 20.41.1000.

    ]]>         Added support for Microsoft Server Windows 2025.

    ]]>
  • Prioritize disabling Non-Fatal Error reporting at the beginning of FLR processing
  • Fix known FW bug PI/CI indexing issue
    • ]]>
  • Prioritize disabling Non-Fatal Error reporting at the beginning of FLR processing
  • Fix known FW bug PI/CI indexing issue
    • ]]>
  • Updated supported environments
    • ]]>
  • Updated SBOM requirement
    • ]]>         Important Notes:

    This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.3 guidance.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where NS204i may not be identified as an NVMe device.

    Addressed an issue where the Logical Drive name was cleared in RBSU after leaving configuration page of an MR controller.

    Addressed an issue that Battery Failure IML message log may be incorrectly logged for MR Controller with Smart Storage Battery.

    Addressed an issue where system failed to boot with selected NVMe HDD by setting One-Time Boot Option in ILO Web.

    Addressed an issue where system may encounter a RSOD while updating SAS drive FW via HPE Service Packs, including, but not limited to, VMware ESXi Online HDD FW Component Bundle 16.00, HPE Synergy Service Pack (SSP) 2024.01.02 (January 2024) and the future HPE Synergy Service Pack (SSP) 2024.07.01 (July 2024).

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023). This version of the System ROM contains updates aligned with the Intel Product Update (IPU) version IPU.2024.1 guidance. This revision of the System ROM includes the mitigation for security vulnerabilities CVE-2023-45229, CVE-2023-5678, and CVE-2021-38578. The security vulnerabilities are documented in the CVE report site. They are not unique to HPE servers. This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.00.03.604 (2.00_12_20_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where the boot order was cleared unexpectedly after configuring System Configuration (RBSU) options, navigating to Boot Options > UEFI Boot Settings > UEFI Boot Order, and then pressing F12 to Save and Exit.

    Removed the value of "Not Specified" in System Configuration (RBSU) option "Server Security/Trusted Platform Module Options/Current TPM 2.0 Active PCRs" and set the default value as "SHA1 and SHA256".

    Known Issues:

    None]]>         Updated to version 9.4.10.20

    ]]>         Updated to version 9.4.9.21

    ]]>         Important Notes:

    Ver. 1.0.0.22(D) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision D if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>         Important Notes:

    Ver. 1.0.0.22(C) contains updates to the firmware packaging and is functionally equivalent to ver. 1.0.0.22. It is not necessary to upgrade with Revision B if a previous component revision was used to upgrade the firmware to version 1.0.0.22.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where Innovation Engine (IE) may improperly reset every 24 hours.

    Known Issues:

    None

    ]]>
  • Added support for VMware 8.0
    • ]]>
  • Added support for VMware 8.0
    • ]]>         Firmware for the following devices has been updated to 12.28.2302:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.4030:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

    No new Features and changes included in version 12.28.2302.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         No new fixes have been added in version 12.28.2302.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>         Firmware for the following devices has been updated to 12.28.2006:

    • 825110-B21 (HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter)
    • 825111-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter)

    Firmware for the following devices has been updated to 16.35.3006:

    • 879482-B21 (HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter)
    • 872726-B21 (HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter)

    Important : Security Hardening Enhancements - This release contains important reliability improvements and security hardening enhancements. HPE recommends upgrading your device firmware to this version to improve the firmware security and reliability of your device.

    New Features and changes included in version 12.28.2006:

    • Increased the maximum XRQ number to 512.

    New features and changes included in version 16.35.4030:

    • Added support for postponing QP timeout "retry exceeded" errors for traffic directed at specific destinations. This new capability prevents broken connections for destinations in downtime because of live migration.
    ]]>         The following issues have been fixed in firmware version 12.28.2006:

    • Fixes an issue that caused the DCR to be destroyed before the retry option managed to work when the retry timeout is too big. In this case the DCR' time-to-live was increased, and the maximum retry timeout was decreased.
    • Increased PHY power consumption limit to 1.5w.
    • Fixed an issue that caused PortCounters.PortRcvErr / PPCNT.infiniband_counters.PortRcvErr not to report port icrc errors.

    The following issues have been fixed in version 16.35.4030:

    • VF FLR would get stuck when its PF triggered the FLR as well.
    • Unexpected source UDP port appeared in RoCE packets when the firmware ignored a non-PF driver configuration for RoCE source UDP port control (as set in SET_HCA_CAP.sw_r_roce_src_udp_port).
    ]]>
  • Fixed an issue causing a digest mismatch or missing digest error when installing SSA tools on Linux systems with FIPS enabled.
    • ]]>
  • Fixed an issue causing a digest mismatch or missing digest error when installing SSA tools on Linux systems with FIPS enabled.
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Added support for Microsoft Server Windows 2025.
    • ]]>
  • Assert fixes, logging enhancements and all current firmware improvements and bug fixes.
    • ]]>
  • Assert fixes, logging enhancements and all current firmware improvements and bug fixes.
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system may reboot infinitely when a faulty PCIE card was installed.

    Fixed an issue where the firmware versions of iLO and Backplane showed incorrectly.

    Known Issues:

    None]]>         Important Notes:

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system was not compliant with WS2025 HSTI requirement.

    Known Issues:

    None]]>
  • Fixed flashing issue through SDR method
    • ]]>
  • Fixed flashing issue through SDR method
    • ]]>         Added new Microsoft Option Rom UEFI CA 2023 secure boot key.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where certain Server Configuration Lock settings cannot be modified by Redfish interface.

    Known Issues:

    None]]>         Added Zilia DIMM manufacturer ID for SMBIOS information.

    ]]>         Important Notes:

    This revision of the System ROM includes AMD reference code MilanPI 1.0.0.E for AMD 3rd Generation EPYC processors. This revision of the System ROM includes AMD reference code RomePI 1.0.0.K for AMD 2nd Generation EPYC processors.

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the iLO firmware version may show incorrectly.

    Known Issues:

    None]]>
  • Fixes the Power Coordination algorithm which ensures the drive will properly negotiate power with SPL-2 and newer compliant controllers.
    • ]]>
  • Fixes the Power Coordination algorithm which ensures the drive will properly negotiate power with SPL-2 and newer compliant controllers.
    • ]]>