changed Online ROM Flash Component for VMware ESXi - HPE Smart Array P408i-p, P408e-p, P408i-a, E208i-p, E208e-p, E208i-a, P816i-a SR Gen10 HPE Smart Array P408i-p, P408e-p, P408i-a, E208i-p, E208e-p, E208i-a, P816i-a SR Gen10 Hewlett Packard Enterprise VMware ESXi 7.0 VMware ESXi 8.0 Storage Server Firmware - Storage Controller French,English (US),German,Italian,Japanese,Spanish

To use Smart Update Manager from the Service Pack for ProLiant:

Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):

Place the Service Pack for ProLiant on a USB key using the USB Key Utility for Windows.
Place the desired Linux firmware component to be updated in the directory, /packages on the USB key.
Boot from the newly created Service Pack for ProLiant USB key.
Follow Smart Update Manager steps to complete firmware update.

Remote Online:

Download the appropriate SPP.
Add the component to the SPP.
Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
Run SUM.
Add the ESXi host to be updated as a remote target/node.
Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
Follow Smart Update Manager Steps and complete the firmware update.

To update firmware from VMware ESXi operating system on target server:

Enable Tech Support Mode on the ESXi host.
Login as root. (You must be root in order to apply the update.)
Place the Smart Component zip file in a temporary directory.
Unzip the file CPXXXXXX.zip
Ensure that CPXXXXXX.vmexe is executable by using the command:

chmod +x CPXXXXXX.vmexe

From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe
Follow the directions given by the Smart Component.
Logout
Disable Tech Support Mode on the ESXi host.

Additional information to execute VIB file.

Commands required to execute VIB file on ESXi 7.0

Installing vib file : esxcli software component apply –d <full path>/CPxxxxxx_VMw.zip.
Executing the binary from path “/opt/Smart_Component/CPxxxxxx” : ./Execute_Component with command set options -s, -f, -e, -g etc. if required.
Removing vib file : esxcli software component remove –n Smart-Component-CPxxxxxx
After removing the vib, we need to manually remove the folders using : rm –rf /opt/Smart_Component/CPxxxxxx

<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip

]]> That package versions within () for the same firmware version include the same firmware binary image. Users don’t need to reflash the same firmware version.

Smart Component CP057475

general enhancement important extension Online ROM Flash Component for VMware ESXi - HPE Smart Array P408i-p, P408e-p, P408i-a, E208i-p, E208e-p, E208i-a, P816i-a SR Gen10 http://www.hpe.com HPEVMwareSupport@groups.ext.hpe.com 2023-06-08T10:57:24.240000+00:00 1.4.5 HPE_bootbank_CP057475_5.61.1-8.0.0.20143090 CP057475 5.61.1-8.0.0.20143090 HPE bootbank

CP057475 - Online firmware for HPE_SA_CTRL on ESXi 7.0.0 8.0.0

false false false firmware vib20/CP057475/HPE_bootbank_CP057475_5.61.1-8.0.0.20143090.vib 12064366 sha-256 a1a45de4a6678c89e42f9bf08165430c57ec9fd8f518d0c43f9678da10c4c684 79F0C163-0C13-4662-9DEA-09235FEF90CB HPE Smart Array P816i-a SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c1100 5.61 HPE Smart Array P416ie-m SR G10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c1101 5.61 HPE Smart Array P408e-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0601 5.61 HPE Smart Array P408i-c SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0603 5.61 HPE Smart Array P408i-a SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0602 5.61 HPE Smart Array P408i-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0600 5.61 HPE Smart Array P204i-c SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0700 5.61 HPE Smart Array E208i-c SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0652 5.61 HPE Smart Array E208e-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0651 5.61 HPE Smart Array E208i-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0650 5.61 HPE Smart Array E208i-a SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0654 5.61 ComboFirmware RuntimeAgent changed Online ROM Flash Component for Linux (x64) - HPE Smart Array P408i-p, P408e-p, P408i-a, E208i-p, E208e-p, E208i-a, P816i-a SR Gen10 HPE Smart Array P408i-p, P408e-p, P408i-a, E208i-p, E208e-p, E208i-a, P816i-a SR Gen10 Hewlett Packard Enterprise Red Hat Enterprise Linux 8 Server SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server Storage Server Firmware - Storage Controller French,English (US),German,Italian,Japanese,Spanish To update firmware from Linux operating system on target server:

Updating firmware with rpm installed:

Install the firmware rpm using the command: rpm -ivh <rpm_filename>. This extracts the contents of the rpm to the '/usr/lib/x86_64-linux-gnu' location
The CPXXXXXX.scexe script is located in the 'scexe-compat' folder. The actual name of the 'firmware-smartarray-xxxxxxxxxx-*' folder is based on the version of the rpm installed in the first step above
To install firmware, you can execute ONE of the following commands:
- ./ CPXXXXXX.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
- ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-smartarray-xxxxxxxxxx-*' location
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory
To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension

Updating firmware without installing the rpm:

Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id. This extracts the contents of the rpm to 'usr' folder in the current directory
Navigate to the 'usr/lib/x86_64-linux-gnu/firmware-smartarray-xxxxxxxxxx-*' location and run ./setup to update the firmware. The actual name of the 'firmware-smartarray-xxxxxxxxxx-*' folder is based on the version of the rpm installed in the step above
The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory

Additional Information:

Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

To use Smart Update Manager from the Service Pack for ProLiant:

Offline:

Place the Service Pack for ProLiant on a USB key using the USB Key Utility for Windows.
Place the desired firmware to be updated in the directory, /SPP20xxxxx/packages on the USB key.
Boot from the newly created Service Pack for Proliant USB key.
Follow Smart Update Manager steps to complete firmware update.

Online:

Login as root. (You must be root in order to apply the ROM update.)
Place the desired firmware to be updated in the directory, /SPP20xxxxx/packages
Run launch_sum.sh script which is found in the root of the ISO
Follow the instructions on the screen

]]> That package versions within () for the same firmware version include the same firmware binary image. Users don’t need to reflash the same firmware version.

]]> 9005 028F 103C 0700 9005 028F 103C 0601 9005 028F 103C 0602 9005 028F 103C 0603 9005 028F 103C 0600 9005 028F 103C 1101 9005 028F 103C 1100 9005 028F 103C 0651 9005 028F 103C 0654 9005 028F 103C 0652 9005 028F 103C 0650 CP057480.scexe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 300 firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware-smartarray-f7c07bdbbd-5.61-4.1.x86_64.rpm firmware-smartarray-f7c07bdbbd-5.61-4.1.x86_64.rpm file://./packages/firmware-smartarray-f7c07bdbbd-5.61-4.1.x86_64.rpm ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-4.1 ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-4.1/.cpq_package.inc ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-4.1/.setup ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-4.1/CP057480.xml ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-4.1/HPE_luxor_5.61.bin.fw ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-4.1/hpsetup ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-4.1/libsetup.so ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-4.1/payload.json ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-4.1/setup ./usr/lib/x86_64-linux-gnu/hp-scexe-compat ./usr/lib/x86_64-linux-gnu/hp-scexe-compat/CP057480.scexe ./usr/lib/x86_64-linux-gnu/scexe-compat ./usr/lib/x86_64-linux-gnu/scexe-compat/CP057480.scexe 79F0C163-0C13-4662-9DEA-09235FEF90CB HPE Smart Array P816i-a SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c1100 5.61 HPE Smart Array P416ie-m SR G10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c1101 5.61 HPE Smart Array P408e-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0601 5.61 HPE Smart Array P408i-c SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0603 5.61 HPE Smart Array P408i-a SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0602 5.61 HPE Smart Array P408i-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0600 5.61 HPE Smart Array P204i-c SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0700 5.61 HPE Smart Array E208e-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0651 5.61 HPE Smart Array E208i-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0650 5.61 HPE Smart Array E208i-a SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0654 5.61 HPE Smart Array E208i-c SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0652 5.61 ComboFirmware RuntimeAgent changed Online ROM Flash Component for Windows (x64) - HPE Smart Array P408i-p, P408e-p, P408i-a, E208i-p, E208e-p, E208i-a, P816i-a SR Gen10 HPE Smart Array P408i-p, P408e-p, P408i-a, E208i-p, E208e-p, E208i-a, P816i-a SR Gen10 Hewlett Packard Enterprise Microsoft Windows Server 2019 Microsoft Windows Server 2022 Storage Server Firmware - Storage Controller French,English (US),German,Italian,Japanese,Spanish To update firmware from Windows operating system on target server:

Place the Smart Component in a temporary directory.
Double-click on the Smart Component.
Follow the directions given by the Smart Component.
Reboot your system if you would like the update to take effect immediately.

To use HPE Smart Update Manager from the Service Pack for ProLiant :

Place the desired firmware to be updated in the directory, \SPP20xxxxx\packages
Run launch_sum.bat script which is found in the root of the ISO
Follow the instructions on the screen

]]> That package versions within () for the same firmware version include the same firmware binary image. Users don’t need to reflash the same firmware version.