Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0/8.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.11.00_k1_k5.14.21_150500.37-1.sles15sp5.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Rewrite of same Driver version has to be performed using --force or --replacepkgs with --nodeps option
Example: rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --force --nodeps
rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --replacepkgs --nodeps
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>IMPORTANT UPDATE: SSA (GUI) for Linux can now be run without requiring the System Management Homepage. SSA now supports a Local Application Mode for Linux. The System Management Homepage is still supported, but no longer required to run the SSA GUI.
To invoke, enter the following at the command prompt:
ssa -local
The command will start SSA in a new Firefox browser window. When the browser window is closed, SSA will automatically stop. This is only valid for the loopback interface, and not visible to external network connections.
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.566.9-1.rhel8u9.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
This method works if this component is already installed on the ESXi host and is running in the Auto mode.
Refer Server updates through iLO 5 in SUM User Guide
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>From that drive and directory, execute the downloaded file.]]>
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
This product contains driver version 1.11.2.0.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.589.21-1.rhel9u2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi operating system on target server:
chmod x CPXXXXXX.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0/8.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter | 8001AF27 | 1.3429.0 | 4.30 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.3
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK Adapter for HPE | 8001AF2A | 1.3429.0 | 4.31 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.2
]]>http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-14.2.566.9_k5.14.21_150500.37-1.sles15sp5.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --reinstall option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm --reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>Refer to VMware documentation for information on the esxcli commands
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download <filename>.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for <filename>.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file <filename>.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.566.9-1.rhel9u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>On the Web-based Management Device Homepage, under "options", "Anonymous Access" should be enabled when using SSA.
When clicking on a controller that is currently being configured in a different SSA session, a message will appear which allows you to override the other SSA session or cancel. If you choose to override the other SSA session, any unsaved changes in the other session will be discarded.
To uninstall SSA, use Add/Remove Programs located in the Control Panel on Windows Systems.
To run SSA in local application mode on Windows, Internet Explorer must be the default browser.
The following are known issues:
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>* The previous web release kmod-igb-5.14.16-1.rhel8u8.x86_64.rpm is unpublished (This generic binary RPM is the same with kmod-hp-igb version 6.14.16）
- The RPM package name was changed from (hp-igb) to (igb). Now we revert this change from (igb) to (hp-igb).
- The new RPM release is deferred to next new OS major release
* kmod-hp-igb and kmod-igb are different RPM package for OS. They can be together installed in the same time.
To avoid confusion, if you already download and install kmod-igb-5.14.16-1.rhel8u8.x86_64.rpm, please uninstall the previous RPM by #rpm -e kmod-igb and then install the updated RPM.
NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.
NOTE: Below Points are applicable only for Intel and AMD
• Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
• The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
• The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).
Supported Utilities for RL300
Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
• RESTful Interface Tool (iLOREST) 4.8.0.0
NOTE: Below Points are applicable only for RL300
For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide
]]>iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>
Users have to install hpe-auxiliary driver before installing this product for rhel8.2/8.3/8.4 components.
Download page:
]]>To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Click the "Install" button to proceed with the installation.]]>
Additional Information:
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-2CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter | 8001AF25 | 1.3429.0 | 4.30 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.3
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter | 8001AF24 | 1.3429.0 | 4.30 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.3
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel9u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>]]>
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
Click the "Install" button to proceed with the installation.]]>
# ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
Additional Information:
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version |
| BCM 5719 1GbE 4p BASE-T Adptr | 1.48 | 21.6.2 | 1.5.49 | 21.6.66 |
| BCM 5719 1GbE 4p BASE-T OCP3 Adptr | 1.48 | 21.6.2 | 1.5.49 | 21.6.66 |
| BCM 5719 1GbE 4p BASE-T LOM Adptr | 1.48 | 21.6.2 | 1.5.49 | 21.6.66 |
| BCM 5720 1GbE 2p BASE-T LOM Adptr | 1.42 | 21.6.2 | 1.5.49 | 21.6.66 |
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.566.9-1.rhel8u8.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
This product contains driver version 1.11.3.0.
]]>http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.11.00.a5_k1_k1_k5.14.21_150400.22-1.sles15sp4.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Rewrite of same Driver version has to be performed using --force or --replacepkgs with --nodeps option
Example: rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --force --nodeps
rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --replacepkgs --nodeps
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>* The previous web release igb-kmp-default-5.14.16_k5.14.21_150500.53-1.sles15sp5.x86_64.rpm is unpublished (This generic binary RPM is the same with hp-igb-kmp-default version 6.14.16）
- The RPM package name was changed from (hp-igb-kmp-default) to (igb-kmp-default). Now we revert this change from (igb-kmp-default) to (hp-igb-kmp-default).
- The new RPM release is deferred to next new OS major release
* hp-igb-kmp-default and igb-kmp-default are different RPM package for OS. They can be together installed in the same time.
To avoid confusion, if you already download and install igb-kmp-default-5.14.16_k5.14.21_150500.53-1.sles15sp5.x86_64.rpm, please uninstall the previous RPM by #rpm -e igb-kmp-default and then install the updated RPM.
Remote Online:
To update the driver using VMware tools:
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>http://www.hpe.com/storage/spock/
The HPE supplied Qlogic driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
]]>Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter | 8001AF23 | 1.3429.0 | 4.30 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.3
]]>Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>ssaducli -f adu-report.zip
To generate a SmartSSD Wear gauge report, enter the following command:
ssaducli -ssdrpt -f ssd-report.zip
More options can be found by "ssaducli -help".
Additional Notes
----------------
Both the diagnostic and SmartSSD wear gauge reports are generated in compressed
(ZIP) format.
The diagnostic report output archive contains the following files:
* ADUReport.txt => Diagnostic report in text format
* ADUReport.xml => Diagnostic report in XML format
* ADUReport.htm => HTML viewer for diagnostic report
* report.checksum => checksum file
* SlotX.txt (SlotX.old) => Controller serial output log
Note: The serial output log file(s) are only available if the "HPE Smart
Array SAS/SATA Event Notification Service" is installed and running.
To view the diagnostic report in a browser, extract the ADUReport.htm. Open
ADUReport.htm in the browser.
The SmartSSD wear gauge report output archive contains the following files:
* SmartSSDWearGaugeReport.txt => SmartSSD wear gauge report in text format
* SmartSSDWearGaugeReport.json => SmartSSD wear gauge report in JSON format
* SmartSSDWearGaugeReport.htm => HTML viewer for the JSON wear gauge report
To view the SmartSSD wear gauge report in a browser, extract the
SmartSSDWearGaugeReport.json, SmartSSDWearGaugeReport.htm files to a
directory (both files must reside in the same directory). Open
SmartSSDWearGaugeReport.htm in the browser.
Known Issues
------------
* When installing the 32-bit version of SSADUCLI on a system that has a
64-bit (x64) version of SSADUCLI installed, please uninstall the 64-bit
version first. Failing to uninstall the 64-bit version will cause the 32-bit
installation to fail.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>Commands can also be executed from outside the SSA CLI console using the syntax: ssacli
Type "ssacli help" or type "help" at the CLI prompt for usage details.
]]>
http://www.hpe.com/storage/spock/
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
]]>This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 15 service pack 4 and SuSE Linux Enterprise Server 15 service pack 5 has to be performed using --force --nodeps option
Example: rpm –Uvh HPE-CNA-FC-hpeqlgc-Enablement-Kit-<version>.noarch.rpm --force --nodeps
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
Updating firmware without installing the rpm:
Additional Information:
| NIC | EEPROM/NVM Version | OROM Version | NVM Version |
|---|---|---|---|
| HPE Ethernet 10Gb 2-port SFP+ OCP3 X710-DA2 Adapter | 8000E5DB | 1.3429.0 | 9.30 |
| HPE Ethernet 10Gb 2-port SFP+ X710-DA2 Adapter | 8000E5EC | 1.3429.0 | 9.30 |
| Intel I350-T4 Ethernet 1Gb 4-port BASE-T Adapter | 800011F8 | 1.3429.0 | N/A |
| Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter | 800011EF | 1.3429.0 | N/A |
| Intel(R) I350 Gigabit Network Connection (2-port) | 8000119C | 1.3429.0 | N/A |
| Intel(R) I350 Gigabit Network Connection (4-port) | 8000119D | 1.3429.0 | N/A |
The combo image v1.3429.0 includes: Boot Agent: 1GbE - v1.5.90, 10GbE - v2.4.51, 40GbE - v1.1.44 & UEFI Drivers: 1GbE - v9.8.33, 10GbE - v8.2.13, 40GbE - v4.9.70
]]>Refer to VMware documentation for information on the esxcli commands
]]>]]>
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 15 service pack 4 has to be performed using --reinstall option
Example: rpm –Uvh HPE-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm --reinstall
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>http://www.hpe.com/storage/spock/
The HPE supplied Qlogic driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
]]>Remote Online, if the component is supported by SUM but is not yet part of an SPP:
To use HPE Insight Control for vCenter :
To update firmware from VMware ESXi operating system on target server:
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
T
To update firmware from VMware ESXi operating system on target server:
chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0/8.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>Users have to install hpe-auxiliary driver before installing this product for sles15sp2/sp3 components.
Download page:
https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX-72dcb598f8b94e4d8385c7fa1d
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel8u9.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 | 8001AF22 | 1.3429.0 | 4.30 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.3
]]>http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-14.2.566.9_k5.14.21_150400.22-1.sles15sp4.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --reinstall option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm --reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE | 227.0.131.0 |
227.0.134.0 |
227.0.133.0 |
227.0.133.0 |
227.0.134.0 |
| Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE |
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Additional Information:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter | 8001AF29 | 1.3429.0 | 4.30 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.3
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
http://www.hpe.com/storage/spock/
The target environment must have the libHBAAPI Package installed prior to the installation of the firmware as the discovery of adapters might not complete without the library. (If not already present, the libHBAAPI Package can be obtained from the operating system installation media.)
The HPE supplied enablement kit must be installed prior to this firmware component being identified by SUM for deployment.
The OOB driver and enablement kit are available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
It is advised to provide read-write permissions on /var/tmp folder. Firmware deployment via Service Pack for ProLiant(SPP) might be unsuccessful in some cases , if read-write(rw) permissions are not enable on /tmp or /var/tmp directories.
NOTE: During the flash operation, the message "No Adapter Found!" may appear in the logs. These messages do not indicate a problem with the firmware flash operation and may be ignored.
It is advised to provide read-write permissions on /var/tmp folder. Firmware deployment via Service Pack for ProLiant(SPP) might be unsuccessful in some cases , if read-write(rw) permissions are not enable on /tmp or /var/tmp directories.
To update the driver using VMware tools:
NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.
NOTE: Below Points are applicable only for Intel and AMD
• Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
• The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
• The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).
Supported Utilities for RL300
Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
• RESTful Interface Tool (iLOREST) 4.8.0.0
NOTE: Below Points are applicable only for RL300
For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide
]]>Extract the rpm file using the command ‘rpm2cpio <filename> | cpio –idmv’
Navigate to /usr/lib/x86_64-linux-gnu/firmware-ilo6-1.10-1.1 or /usr/lib/x86_64-linux-gnu/firmware-ilo6-1.20-1.1
Run the ‘hpsetup’ file using the command ./hpsetup or ./hpsetup –f when updating to same version
iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi 7.x operating system on target server:
chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0/8.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Use --force or --replacefiles options while installing or updating the HPE Broadcom RoCE library which may conflict with inbox library
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD2
Last Recommended or Critical Version:
HPD1
Previous Version of Firmware:
HPD1
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
http://www.hpe.com/storage/spock/
The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
This method works if this component is already installed on the ESXi host and is running in the Auto mode.
Refer Server updates through iLO 5 in SUM User Guide
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
To update the driver using VMware tools:
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter | 8001AF35 | 1.3429.0 | 4.30 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.3
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
Remote Online:
To update the driver using VMware tools:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel9u2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.
NOTE: Below Points are applicable only for Intel and AMD
• Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
• The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
• The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).
Supported Utilities for RL300
Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
• RESTful Interface Tool (iLOREST) 4.8.0.0
NOTE: Below Points are applicable only for RL300
For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel8u8.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| HPE Ethernet 10Gb 2-port SFP+ BCM57412 Adapter | 227.0.131.0 |
227.0.134.0 |
227.0.133.0 |
227.0.133.0 |
227.0.134.0 |
| HPE Ethernet 10Gb 2-port SFP+ BCM57412 OCP3 Adapter | |||||
| HPE Ethernet 10Gb 2-port BaseT BCM57416 Adapter | |||||
| HPE Ethernet 10Gb 2-port BaseT BCM57416 OCP3 Adapter | |||||
| HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 Adapter | |||||
| HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 OCP3 Adapter |