• Fixed self-initiated resetting of drives under queue full handling situations
    • ]]>
  • Added support for VMware 8.0
    • ]]>         Updated to driver version 14.2.537.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         Updated to driver version 14.0.534.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2022

    ]]>         Added support for:

    RedHat Enterprise Linux 8.9

    RedHat Enterprise Linux 9.3

    Updated Driver version 10.02.11.00-k1

    ]]>         Added support for:

    RedHat Enterprise Linux 8.8

    RedHat Enterprise Linux 9.2

    SuSE Linux Enterprise Server 15 SP5

    Updated Driver version 10.02.10.00-k1

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems may enter standby mode in Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where systems may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may enter standby mode on Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where system may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None]]>
  • This product now supports allocating up to 256 transmit/receive queue pairs.
  • This product now supports generic binary RPM starting from Red Hat Enterprise Linux 9.2.
    • ]]>
  • This product now supports allocating up to 256 transmit/receive queue pairs.
  • This product now supports generic binary RPM starting from Red Hat Enterprise Linux 9.2.
    • ]]>
  • This product now supports allocating up to 256 transmit/receive queue pairs.
  • This product now supports generic binary RPM starting from SUSE Linux Enterprise Server 15 SP5.
    • ]]>
  • This product now supports allocating up to 256 transmit/receive queue pairs.
  • This product now supports generic binary RPM starting from SUSE Linux Enterprise Server 15 SP5.
    • ]]>         SR 2.8.2/SR 3.3.2 Drop1

    ]]>         Initial Release

    ]]>         This product now supports generic binary RPM starting from Red Hat Enterprise Linux 9.2.

    ]]>         This product now supports generic binary RPM starting from Red Hat Enterprise Linux 9.2.

    ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of CVL4.2.

    ]]>
  • Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
    • ]]>
  • Firmware addresses a hot plug reporting concern
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems may enter standby mode in Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where systems may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may enter standby mode on Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where system may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None]]>         For 2024 March MSB

    ]]>         Initial Release

    ]]>         for 2024 March MSB

    ]]>         Initial Release

    ]]>         Updated to driver version 14.2.589.21-1

    ]]>         Updated to driver version 14.2.589.10-1

    ]]>         Fixed the following behavior:

    Access of a Remote Block Device with the Fibre Channel Driver Kit (LPFC) for HPE Emulex Host Bus Adapters Installed, may Result in inaccessibility of the Paths, When Connected to an Array using T10-DIF.

    For more details, please verify the below advisory link 

    https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00134190en_us

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         SR 2.8.2/SR 3.3.2 Drop1

    ]]>         Initial Release

    ]]>         TBD

    ]]>         This product enhances driver logging as more generic and appropriate.

    ]]>
  • This product corrects an issue PSOD seen with iperf traffic, when  rx-ring size less than 256 bytes.
  • This product corrects an issue Packet drops in ENS mode for tunnel traffic due to checksum issues.
  • This product corrects an issue VXLAN tunnel port configuration failure during driver reload
  • This product corrects an issue BFD (Bidirectional Forwarding Detection) control failures in NSX environment.
  • This product corrects an issue ENS driver invokes driver APIs with spinlock, causing system crash.
  • This product corrects an issue No VLAN strip issue, when VSAN configs is invoking VLAN stripping enable followed by disable before the driver sends first time config to firmware.
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where Intel® Software Guard Extensions (SGX) Attestation may fail. Software Guard Extensions (SGX) is disabled by default.

    Known Issues:

    None]]>         Added support for NVMe over Fabrics.

    Added new System Configuration (RBSU) configuration options that allow the system not to create boot options for non-bootable fixed drive.

    Modified System Configuration (RBSU) configuration options that support new license SKU "RAID1 Only" and drop "Standard" SKU for Intel VROC.

    Enhanced the warning messages of "Embedded SATA Configuration" options in RBSU.

    Enhanced the warning messages of "Intel® CPU VMD Support" options in RBSU.

    Added new System Configuration (RBSU) configuration options that could control Intel Trust Domain Extension (TDX) functions.

    Added new System Configuration (RBSU) configuration options that could control the NVMe-oF Software Initiator.

    Added new System Configuration (RBSU) configuration options that could control the PCI-E Data Link Feature Exchange.

    Added new System Configuration (RBSU) configuration options that allow Power Supply Unit fan control.

    Enhanced the help message for System Configuration (RBSU) configuration options for Automatic Power-On.

    Enhanced the help message and status information for System Configuration (RBSU) configuration options for HBM Memory Mode.

    Updated the Processor Capability Indicator in SMBIOS type 197.

    Enhanced POST messages in situations where where unsupported processors are installed.

    Added PCIe Gen2 device in SMBIOS type 9.

    Enhanced SMBIOS type 9 for PCIe retimer device information.

    Displayed the information of first device in SMBIOS type 203 when the PCI slot is bifurcated.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.005.0 (2.10_11_09_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system would reboot when hot-added NVMe drives in Linux with Intel® VMD Support enabled.

    Fixed an issue where SMBIOS type 219 showed incorrect feature flags when the Intel® Xeon® CPU Max Series processors are installed.

    Fixed an issue where PCIe fatal error reporting function did not respond correctly.

    Fixed an issue where Intel® TSX Support could not be set with enabled state.

    Fixed an issue where the x2APIC is not enabled for 64-core processors.

    Fixed an issue where the PCIe correctable error message was not displayed in Integrated Management Log (IML).

    Fixed an issue where the OCP retimer slot number was not correctly reported in SMBIOS type 216.

    Known Issues:

    None]]>         TBD

    ]]>         This product fix an issue that TCP traffic on VMs might be interrupted if PF undergoes a reset.

    ]]>         This product fix an issue that TCP traffic on VMs might be interrupted if PF undergoes a reset.

    ]]>         TBD

    ]]>
  • This product now changes default number of queues for high core count platforms
  • This product changes the default setting where the GNSS(GNSS_SUPPORT) is disabled now
  • This product now supports Red Hat Enterprise Linux 9.1 Server
    • ]]>
  • This product fixes an issue where the virtual function failed to create
  • This product fixes an issue where crash is observed when changing the bonding mode from Balance TLB to 802.3ad
  • This product fixes an issue where the traffic goes to unintended random rx_queues when number of parallel stream increased in iperf even if affinity is set
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems may enter standby mode in Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where systems may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may enter standby mode on Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where system may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None]]>         Updated to driver version 14.2.589.21-1

    ]]>         Updated to driver version 14.2.589.10-1

    ]]>         Fixed the following behavior:

    Access of a Remote Block Device with the Fibre Channel Driver Kit (LPFC) for HPE Emulex Host Bus Adapters Installed, may Result in inaccessibility of the Paths, When Connected to an Array using T10-DIF.

    For more details, please verify the below advisory link 

    https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00134190en_us

    ]]>
  • Fixed issue of self-initiated resetting of drives under queue full handling situations
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems may enter standby mode in Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where systems may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may enter standby mode on Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where system may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems may enter standby mode in Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where systems may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may enter standby mode on Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where system may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None]]>         TBD

    ]]>         This product now supports  ResetToDefault property(RDE Port Schema).

    ]]>         This product addresses an issue where InterfaceEnabled property is read only and it can't patch this property

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems may enter standby mode in Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where systems may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may enter standby mode on Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where system may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems may enter standby mode in Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where systems may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may enter standby mode on Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where system may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where Intel® Software Guard Extensions (SGX) Attestation may fail on the 5th Generation Intel® Xeon® Scalable Processors. Software Guard Extensions (SGX) is disabled by default.

    Known Issues:

    None]]>         Added support for NVMe over Fabrics.

    Added new System Configuration (RBSU) configuration options that allow the system not to create boot options for non-bootable fixed drive.

    Modified System Configuration (RBSU) configuration options that support new license SKU "RAID1 Only" and drop "Standard" SKU for Intel VROC.

    Enhanced the warning messages of "Embedded SATA Configuration" options in RBSU.

    Enhanced the warning messages of "Intel® CPU VMD Support" options in RBSU.

    Added new System Configuration (RBSU) configuration options that could control Intel Trust Domain Extension (TDX) functions.

    Added new System Configuration (RBSU) configuration options that could control the NVMe-oF Software Initiator.

    Added new System Configuration (RBSU) configuration options that could control the PCI-E Data Link Feature Exchange.

    Added new System Configuration (RBSU) configuration options that allow Power Supply Unit fan control.

    Enhanced the help message for System Configuration (RBSU) configuration options for Automatic Power-On.

    Enhanced the help message and status information for System Configuration (RBSU) configuration options for HBM Memory Mode.

    Updated the Processor Capability Indicator in SMBIOS type 197.

    Enhanced POST messages in situations where where unsupported processors are installed.

    Added PCIe Gen2 device in SMBIOS type 9.

    Enhanced SMBIOS type 9 for PCIe retimer device information.

    Displayed the information of first device in SMBIOS type 203 when the PCI slot is bifurcated.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.005.0 (2.10_11_09_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system would reboot when hot-added NVMe drives in Linux with Intel® VMD Support enabled.

    Fixed an issue where SMBIOS type 219 showed incorrect feature flags when the Intel® Xeon® CPU Max Series processors are installed.

    Fixed an issue where PCIe fatal error reporting function did not respond correctly.

    Fixed an issue where Intel® TSX Support could not be set with enabled state.

    Fixed an issue where the x2APIC is not enabled for 64-core processors.

    Fixed an issue where the PCIe correctable error message was not displayed in Integrated Management Log (IML).

    Fixed an issue where the OCP retimer slot number was not correctly reported in SMBIOS type 216.

    Known Issues:

    None]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of FVL9.2.

    ]]>         Replaced "AC power" with "external power" in the help text of "Automatic power-on" option. This is due to ProLiant server also provides the DC power supply option.

    Added new Microsoft secure boot keys, KEK2023, Microsoft UEFI CA 2023 and Windows UEFI CA 2023, since the original keys will expire in 2026.

    Enabled RBSU "Intel PCH VMD Support" option under the NVMe menu.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system might hang with SRIS of CPU PCIe port enabled.

    Known Issues:

    None]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems may enter standby mode in Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where systems may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may enter standby mode on Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where system may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None]]>         TBD

    ]]>         This product now supports  ResetToDefault property(RDE Port Schema).

    ]]>         This product addresses an issue where InterfaceEnabled property is read only and it can't patch this property

    ]]>         Updated to driver version 14.2.589.21-1

    ]]>         Updated to driver version 14.2.589.10-1

    ]]>         Fixed the following behavior:

    Access of a Remote Block Device with the Fibre Channel Driver Kit (LPFC) for HPE Emulex Host Bus Adapters Installed, may Result in inaccessibility of the Paths, When Connected to an Array using T10-DIF.

    For more details, please verify the below advisory link 

    https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00134190en_us

    ]]>         Updated to version 9.4.9.21

    ]]>         Updated to version 9.4.8.20

    ]]>         for 2024 March MSB

    ]]>         Initial Release

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems may enter standby mode in Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where systems may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may enter standby mode on Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where system may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None]]>         TBD

    ]]>         This product now supports HPE ProLiant Gen11 Platforms with Intel processors

    ]]>         Updated to driver version 14.2.589.21-1

    ]]>         Updated to driver version 14.2.589.10-1

    ]]>         Fixed the following behavior:

    Access of a Remote Block Device with the Fibre Channel Driver Kit (LPFC) for HPE Emulex Host Bus Adapters Installed, may Result in inaccessibility of the Paths, When Connected to an Array using T10-DIF.

    For more details, please verify the below advisory link 

    https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00134190en_us

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.19

    14.2.589.19

    14.2.589.16

    14.2.566.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.19

    14.2.589.19

    14.2.589.16

    14.2.566.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.2.589.19 14.2.589.19 14.2.589.16 14.2.566.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.2.589.19 14.2.589.19 14.2.589.16 14.2.566.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    Universal Boot Image

    Firmware

    UEFI

    Boot Bios

    HPE SN1610E 32Gb Single Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.5

    14.2.589.5

    14.2.579.0

    14.2.566.0

    HPE SN1610E 32Gb Dual Port Fibre Channel Host Bus Adapter

    32Gb

    14.2.589.5

    14.2.589.5

    14.2.579.0

    14.2.566.0
    HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 14.2.589.5 14.2.589.5 14.2.579.0 14.2.566.0
    HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 14.2.589.5 14.2.589.5 14.2.579.0 14.2.566.0

    Added support for:

    RedHat Enterprise Linux 8.8

    RedHat Enterprise Linux 9.2

    SuSE Linux Enterprise Server 15 SP5

    ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of CVL4.2.

    ]]>         TBD

    ]]>
  • This product changed and not issue AP reset during ethtools's reset operation.
  • This product restore phys_port_name format for PF interfaces.
  • This product implement restoring of user filters and implement Toeplitz hashing algorithm to save ntuple filters.
  • This product add changes in the RoCE drive to support rdma driver version query from IPMI interfaces.
  • This product provided fix to restore VxLAN decap flow offload.
  • This product optimized setting of page pool size.
  • This product increased RoCE driver wait time from 1 sec to 5 secs to avoid resource leak.
  • This product disallow dynamic MTU change while netmap application is running.
  • This product now support QoS setting for the SRIOV VLAN.
  • This product introduced environment flag to enable/disable DMA buff feature.
  • This product backported some general patches covering random number generation, devlink, statistics to the OOB driver.
  • This product now deleted all CFA TLS filters when deleting the VNIC.
  • This product improved RoCE Userlib Performance.
  • This product now supports hardware offload for SRv6.
    • ]]>
  • This product fixed an issue that Ping on PF stops when ipv6 underlay flows are created.
  • This product fixed an issue that full list of hardware offloads may not be reported to network stack.
  • This product fixed a ping failure for guest VLAN interface issue by moving the querying of the VF default VLAN before setting up the vnic.
  • This product fixed  uplink ILT rule to avoid TX packet drops.
  • This product fixed RoCE error recovery fails upon injecting error on Thor P425 adapter.
  • This product fixed a system crash observed on rx side for MTU=3k and netmap driver loaded with default buf_size.
  • This product fixed system crash while binding PF back to bnxt_en after after binding it to vfio-pci and launching testpmd due to stack corruption.
  • This product fixed an issue that crash observed while running the ethtool while unloading the driver.
  • This product fixed an issue that crash when processing PTP packets on NPAR functions.
  • This product fixed a firmware crash while validating NIC teaming traffic after error recovery in the RoCE driver.
  • This product fixed a build issue in 5.8 kernel.
  • This product fixed compile error for older Linux kernels (version < 5.3)
    • ]]>         For 2024 March MSB

    ]]>         Initial Release

    ]]>         This product now supports Red Hat Enterprise Linux 8.8.

    ]]>         This product now supports generic binary RPM starting from Red Hat Enterprise Linux 8.8.

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>
  • Addition of new SNMP trap (id# 6146) and Redfish event for runtime Mezzanine card failures on Synergy servers
  • Implemented Reconnect button in iLO UI for enabling customers to manually reconnect to HPE GreenLake for Compute Ops Management
  • In-band IPMI support for SLES 15 operating system on RL300 platforms
  • Configuration to allow disabling/enabling all weak ciphers and key lengths for SSH and TLS interfaces in Production security mode
    • ]]>         None

    ]]>
  • OpenSSL v1.0.2 in iLO FW is patched with Extended Master Secret support for TLS1.2
  • Updated the Eventing mechanism for State Transitions for Security Parameters for Security Dashboard
  • Boot time reduction on HPE ProLiant AMD based Gen11 systems by enabling support for BIOS eMCR feature
  • Redfish includes direct attach backplane in Fabric collection
  • Redfish schema amendments for DMTF compliance
  • Support for Prescott NDR200 IB/200G Ethernet dual-port QSFP112 adapter
  • Support for Intel Emerald Rapids and Sapphire Rapids EE LCC
    • ]]>
  • Slowness due to continuously polling on timer expiry leading to increased CPU utilization
  • Added timestamp register call before iLO starts VSP logging to file to fix iLO VSP locks-up after an iLO reset if there is output displayed during the iLO reset
  • Firmware update fails through iLO web interface due to loss of network connectivity to iLO. You can now retry after 5 minutes when the network connectivity with iLO is restored
  • Existing subscriptions with HPE GreenLake for Compute Ops Management and HPE OneView is corrupt after upgrade to iLO 6 v1.54
  • PSU firmware upgrade flashing failure for Titanium PSUs
    • ]]>
  • This product addressed abnormal fan behavior when BCM5719 OCP3 installed.
  • This product addressed the failure of IP dispatch when using BCM5719 LOM as shared iLO networking.
  • This product addressed that platform might encounter a POST failure when NX1-based controllers and some storage controllers combination.
    • ]]>         This product addresses an issue where network loses IP Address Randomly during AC/DC cycle and idling.

    ]]>         TBD

    ]]>
  • This product now changes default number of queues for high core count platforms
  • This product changes the default setting where the GNSS(GNSS_SUPPORT) is disabled now
  • This product now supports Red Hat Enterprise Linux 8.7 Server 
    • ]]>
  • This product fixes an issue where the virtual function failed to create
  • This product fixes an issue where crash is observed when changing the bonding mode from Balance TLB to 802.3ad
  • This product fixes an issue where the traffic goes to unintended random rx_queues when number of parallel stream increased in iperf even if affinity is set
    • ]]>         TBD

    ]]>         This product enhances driver logging as more generic and appropriate.

    ]]>
  • This product corrects an issue PSOD seen with iperf traffic, when  rx-ring size less than 256 bytes.
  • This product corrects an issue Packet drops in ENS mode for tunnel traffic due to checksum issues.
  • This product corrects an issue VXLAN tunnel port configuration failure during driver reload
  • This product corrects an issue BFD (Bidirectional Forwarding Detection) control failures in NSX environment.
  • This product corrects an issue ENS driver invokes driver APIs with spinlock, causing system crash.
  • This product corrects an issue No VLAN strip issue, when VSAN configs is invoking VLAN stripping enable followed by disable before the driver sends first time config to firmware.
    • ]]>
  • This product correct an issue which fixes the device will be disabled and event ID 10400 after iPerf test.
  • This product correct an issue which fixes link flapping while performing network traffic on the links of the network adapter.
  • This product correct an issue which fixes unexpected transmission stop.
    • ]]>
  • This product correct an issue which fixes the device will be disabled and event ID 10400 after iPerf test.
  • This product correct an issue which fixes link flapping while performing network traffic on the links of the network adapter.
    • ]]>         TBD

    ]]>
  • This product enhanced NDIS packet drop monitoring support for Windows Server vNext.
  • This product enhanced to Implement RoCE variable size WQE(Work Queue Element) support for RDMA.
    • ]]>
  • This product addressed the code initialization in NDSPI(Network Direct Service Provider Interface) to enhance retransmit capability.
  • This product addressed the data retrieval for better RDMA connection.
  • This product addressed the disablement support of CQ overflow detection.
    • ]]>
  • This product addressed abnormal fan behavior when BCM5719 OCP3 installed.
  • This product addressed the failure of IP dispatch when using BCM5719 LOM as shared iLO networking.
  • This product addressed that platform might encounter a POST failure when NX1-based controllers and some storage controllers combination.
    • ]]>         This product addresses an issue where network loses IP Address Randomly during AC/DC cycle and idling.

    ]]>         TBD

    ]]>
  • This product changed and not issue AP reset during ethtools's reset operation.
  • This product restore phys_port_name format for PF interfaces.
  • This product implement restoring of user filters and implement Toeplitz hashing algorithm to save ntuple filters.
  • This product add changes in the RoCE drive to support rdma driver version query from IPMI interfaces.
  • This product provided fix to restore VxLAN decap flow offload.
  • This product optimized setting of page pool size.
  • This product increased RoCE driver wait time from 1 sec to 5 secs to avoid resource leak.
  • This product disallow dynamic MTU change while netmap application is running.
  • This product now support QoS setting for the SRIOV VLAN.
  • This product introduced environment flag to enable/disable DMA buff feature.
  • This product backported some general patches covering random number generation, devlink, statistics to the OOB driver.
  • This product now deleted all CFA TLS filters when deleting the VNIC.
  • This product improved RoCE Userlib Performance.
  • This product now supports hardware offload for SRv6.
    • ]]>
  • This product fixed an issue that Ping on PF stops when ipv6 underlay flows are created.
  • This product fixed an issue that full list of hardware offloads may not be reported to network stack.
  • This product fixed a ping failure for guest VLAN interface issue by moving the querying of the VF default VLAN before setting up the vnic.
  • This product fixed  uplink ILT rule to avoid TX packet drops.
  • This product fixed RoCE error recovery fails upon injecting error on Thor P425 adapter.
  • This product fixed a system crash observed on rx side for MTU=3k and netmap driver loaded with default buf_size.
  • This product fixed system crash while binding PF back to bnxt_en after after binding it to vfio-pci and launching testpmd due to stack corruption.
  • This product fixed an issue that crash observed while running the ethtool while unloading the driver.
  • This product fixed an issue that crash when processing PTP packets on NPAR functions.
  • This product fixed a firmware crash while validating NIC teaming traffic after error recovery in the RoCE driver.
  • This product fixed a build issue in 5.8 kernel.
  • This product fixed compile error for older Linux kernels (version < 5.3)
    • ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where Intel® Software Guard Extensions (SGX) Attestation may fail on the 5th Generation Intel® Xeon® Scalable Processors. Software Guard Extensions (SGX) is disabled by default.

    Known Issues:

    None]]>         Added support for the 5th Gen Intel® Xeon® Scalable Processors.

    Added Maximum Memory Bus frequency support to 5600 MT/s for the 5th Gen Intel® Xeon® Scalable Processors.

    Added support for NVMe over Fabrics.

    Added new System Configuration (RBSU) configuration options that allow the system not to create boot options for non-bootable fixed drive.

    Modified System Configuration (RBSU) configuration options that support new license SKU "RAID1 Only" and drop "Standard" SKU for Intel VROC.

    Enhanced the warning messages of "Embedded SATA Configuration" options in RBSU.

    Enhanced the warning messages of "Intel® CPU VMD Support" options in RBSU.

    Added new System Configuration (RBSU) configuration options that could control Intel Trust Domain Extension (TDX) functions.

    Added new System Configuration (RBSU) configuration options that could control the NVMe-oF Software Initiator.

    Added new System Configuration (RBSU) configuration options that could control the PCI-E Data Link Feature Exchange.

    Added new System Configuration (RBSU) configuration options that allow Power Supply Unit fan control.

    Enhanced the help message for System Configuration (RBSU) configuration options for Automatic Power-On.

    Enhanced the help message and status information for System Configuration (RBSU) configuration options for HBM Memory Mode.

    Updated the Processor Capability Indicator in SMBIOS type 197.

    Enhanced POST messages in situations where where unsupported processors are installed.

    Added PCIe Gen2 device in SMBIOS type 9.

    Enhanced SMBIOS type 9 for PCIe retimer device information.

    Displayed the information of first device in SMBIOS type 203 when the PCI slot is bifurcated.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.005.0 (2.10_11_09_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system would reboot when hot-added NVMe drives in Linux with Intel® VMD Support enabled.

    Fixed an issue where SMBIOS type 219 showed incorrect feature flags when the Intel® Xeon® CPU Max Series processors are installed.

    Fixed an issue where PCIe fatal error reporting function did not respond correctly.

    Fixed an issue where Intel® TSX Support could not be set with enabled state.

    Fixed an issue where the x2APIC is not enabled for 64-core processors.

    Fixed an issue where the PCIe correctable error message was not displayed in Integrated Management Log (IML).

    Fixed an issue where the OCP retimer slot number was not correctly reported in SMBIOS type 216.

    Known Issues:

    None]]>         Updated to version 9.4.9.21

    ]]>         Updated to version 9.4.8.20

    ]]>         TBD

    ]]>
  • This product enhances to add the compatibility with RHEL 9.1
  • This product adds to support HPE MicroServer Gen11
    • ]]>         TBD

    ]]>         This product now supports  ResetToDefault property(RDE Port Schema).

    ]]>         This product addresses an issue where InterfaceEnabled property is read only and it can't patch this property

    ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
    • ]]>
  • Added support for RHEL 9.
    • ]]>         TBD

    ]]>         This product now supports  ResetToDefault property(RDE Port Schema).

    ]]>         This product addresses an issue where InterfaceEnabled property is read only and it can't patch this property

    ]]>         Added a system boot-time reduction System Configuration (RBSU) option "System Options/Boot Time Optimizations/AMD eMCR Boot-Time Reduction" and set to "Enabled" by default. This function required iLO firmware revision 1.55 to take effect. This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/AmdEmcr

    Added the System Configuration (RBSU) options "PCIe Device Configuration/Advanced PCIe Configuration/PCIe Data Link Feature/PCIe Slot XX Data Link Feature Exchange" and set to "Enabled" by default. These options can be used to disable Data Link Feature Exchange when a legacy (Gen 3 or older) PCIe card is installed, which is not compatible with this feature. This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/SlotXXDataLinkFeatureExchange

    ]]>         Important Notes:

    This revision of the System ROM updates iSCSI Dxe driver which provides mitigation for security vulnerability documented as CVE-2021-38575.

    Firmware Dependencies:

    None

    Problems Fixed:

    Greyed out the System Configuration (RBSU) option "System Options/Boot Time Optimizations/Extended Memory Test" since it is not supported on HPE DL325/345/365/385 Gen11 servers.

    Greyed out the System Configuration (RBSU) option "Memory Options/Memory PStates" since it is not supported on HPE DL325/345/365/385 Gen11 servers.

    Addressed an issue where SMBIOS type 9 Designation showed an incorrect string when an OCP retimer card was installed.

    Addressed an issue that can result in a system hang while loading defaults when a user default was saved before.

    Addressed an issue where system memory training failed with certain DIMMs.

    Known Issues:

    None

    ]]>         Added a system boot-time reduction System Configuration (RBSU) option "System Options/Boot Time Optimizations/AMD eMCR Boot-Time Reduction" and set to "Enabled" by default. This function required iLO firmware revision 1.55 to take effect. This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/AmdEmcr

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Greyed out the System Configuration (RBSU) option "System Options/Boot Time Optimizations/Extended Memory Test" since it is not supported on HPE DL325/345/365/385 Gen11 servers.

    Greyed out the System Configuration (RBSU) option "Memory Options/Memory PStates" since it is not supported on HPE DL325/345/365/385 Gen11 servers.

    Addressed an issue where SMBIOS type 9 Designation showed an incorrect string when an OCP retimer card was installed.

    Addressed an issue that can result in a system hang while loading defaults when a user default was saved before.

    Addressed an issue where system memory training failed with certain DIMMs.

    Known Issues:

    None

    ]]>         Added support for:

    RedHat Enterprise Linux 8.9

    RedHat Enterprise Linux 9.3

    Updated Driver version 10.02.11.00-k1

    ]]>         Added support for:

    RedHat Enterprise Linux 8.8

    RedHat Enterprise Linux 9.2

    SuSE Linux Enterprise Server 15 SP5

    Updated Driver version 10.02.10.00-k1

    ]]>
  • Fixed issue of self-initiated resetting of drives under queue full handling situations
    • ]]>         Added support for:

    Red Hat Linux 8.9

    Red Hat Linux 9.3

    Version updated to 14.2.589.11-1

    ]]>         Added support for:

    RedHat Enterprise Linux 8.8

    RedHat Enterprise Linux 9.2

    SuSE Linux Enterprise Server 15 SP5

    Updated to version 14.2.589.4-1

    ]]>         TBD

    ]]>         This product adds to support HPE MicroServer Gen11

     

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems may enter standby mode in Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where systems may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may enter standby mode on Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where system may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None]]>         TBD

    ]]>
  • This product enhanced NDIS packet drop monitoring support for Windows Server vNext.
  • This product enhanced to Implement RoCE variable size WQE(Work Queue Element) support for RDMA.
    • ]]>
  • This product addressed the code initialization in NDSPI(Network Direct Service Provider Interface) to enhance retransmit capability.
  • This product addressed the data retrieval for better RDMA connection.
  • This product addressed the disablement support of CQ overflow detection.
    • ]]>
  • This product addressed abnormal fan behavior when BCM5719 OCP3 installed.
  • This product addressed the failure of IP dispatch when using BCM5719 LOM as shared iLO networking.
    • ]]>         This product addresses an issue where network loses IP Address Randomly during AC/DC cycle and idling.

    ]]>         Updated to driver version 14.2.589.21-1

    ]]>         Updated to driver version 14.2.589.10-1

    ]]>         Fixed the following behavior:

    Access of a Remote Block Device with the Fibre Channel Driver Kit (LPFC) for HPE Emulex Host Bus Adapters Installed, may Result in inaccessibility of the Paths, When Connected to an Array using T10-DIF.

    For more details, please verify the below advisory link 

    https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00134190en_us

    ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of CVL4.2.

     

    ]]>         This product fix an issue that TCP traffic on VMs might be interrupted if PF undergoes a reset.

    ]]>         Added support for:

    RedHat Enterprise Linux 8.9

    RedHat Enterprise Linux 9.3

    Updated Driver version 10.02.11.00-k1

    ]]>         Added support for:

    RedHat Enterprise Linux 8.8

    RedHat Enterprise Linux 9.2

    SuSE Linux Enterprise Server 15 SP5

    Updated Driver version 10.02.10.00-k1

    ]]>         SR 2.8.2/SR 3.3.2 Drop2

    ]]>         Initial Release

    ]]>         TBD

    ]]>         SR 2.8.2/SR 3.3.2 Drop1

    ]]>         Initial Release

    ]]>         TBD

    ]]>
  • This product fixed NCCL(NVIDIA Collective Communication Library) test case by hardware failed when processing multiple Work Request
  • This product fixed the failed to check device capability for atomic operation
    • ]]>         This product now supports SUSE Linux Enterprise Server 15 SP5.

    ]]>         This product now supports generic binary RPM starting from SUSE Linux Enterprise Server 15 SP5.

    ]]>         SR 2.8.2/SR 3.3.2 Drop1
     

    ]]>
  • Fixed an issue when PSOD occurs while attempting to access memory which had already been released.
  • Fixed an issue where PSOD is observed during array creation and deletion.
  • Fixed an issue where datastore creation using logical drive from VMware client GUI is too slow.
  • Fixed an issue where the Hotswapped HBA drives are detected after 20 minutes or when a manual rescan is done.
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems may enter standby mode in Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where systems may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may enter standby mode on Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where system may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None]]>
  • Fixed self-initiated resetting of drives under queue full handling situations
    • ]]>
  • Added support for RHEL 9.
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios
    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter 32Gb 02.09.07 09.14.01 7.36 0.0
    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter 32Gb 02.09.07 09.14.01 7.36 0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.09.07 09.14.01 7.36 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.09.07 09.14.01 7.36 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios
    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter 32Gb 02.08.05 09.12.01 7.34 0.0
    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter 32Gb 02.08.05 09.12.01 7.34 0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.08.05 09.12.01 7.34 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.08.05 09.12.01 7.34 0.0

    Non-disruptive firmware upgrades: non-disruptive firmware updates is enabled and will not require a server reboot to apply.

    ]]>         Fixed the following behavior:

    Temperature Misreading: the adapter was reading incorrect reading of the temperature on the HPE SN1610Q 32Gb Fibre Channel Host Bus adapter's Small Form-factor Pluggable. The symptom would result in a temperature spike and potentially reset the system

    ]]>         TBD

    ]]>         This product now supports  ResetToDefault property(RDE Port Schema).

    ]]>         This product addresses an issue where InterfaceEnabled property is read only and it can't patch this property

    ]]>         for 2024 March MSB

    ]]>         Initial Release

    ]]>         for 2024 March MSB

    ]]>         Initial Release

    ]]>         Added support for:

    RedHat Enterprise Linux 8.9

    RedHat Enterprise Linux 9.3

    Updated the kit to version 6.0.0.1-3

    ]]>         Added support for:

    RedHat Enterprise Linux 8.8

    RedHat Enterprise Linux 9.2

    SuSE Linux Enterprise Server 15 SP5

    Updated the kit to version 6.0.0.0-19

    ]]>         TBD

    ]]>         This product now supports Red Hat Enterprise Linux 9 Update 1.

    ]]>         For 2024 March MSB

    ]]>         Initial Release

    ]]>         TBD

    ]]>         This product adds to support HPE MicroServer Gen11

    ]]>         Added support for:

    Red Hat Linux 8.9

    Red Hat Linux 9.3

    Version updated to 14.2.589.11-1

    ]]>         Added support for:

    RedHat Enterprise Linux 8.8

    RedHat Enterprise Linux 9.2

    SuSE Linux Enterprise Server 15 SP5

    Updated to version 14.2.589.4-1

    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios
    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter 32Gb 02.09.07 09.14.01 7.36 0.0
    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter 32Gb 02.09.07 09.14.01 7.36 0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.09.07 09.14.01 7.36 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.09.07 09.14.01 7.36 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios
    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter 32Gb 02.08.05 09.12.01 7.34 0.0
    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter 32Gb 02.08.05 09.12.01 7.34 0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.08.05 09.12.01 7.34 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.08.05 09.12.01 7.34 0.0

    Non-disruptive firmware upgrades: non-disruptive firmware updates is enabled and will not require a server reboot to apply.

    ]]>         Fixed the following behavior:

    Temperature Misreading: the adapter was reading incorrect reading of the temperature on the HPE SN1610Q 32Gb Fibre Channel Host Bus adapter's Small Form-factor Pluggable. The symptom would result in a temperature spike and potentially reset the system

     

    ]]>         Initial release.

    ]]>
  • Fixed self-initiated resetting of drives under queue full handling situations
    • ]]>
  • Added support for Microsoft Windows Server 2022.
    • ]]>
  • Fixed issue of self-initiated resetting of drives under queue full handling situations
    • ]]>         for 2024 March MSB

    ]]>         Initial Release

    ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
    • ]]>
  • Added support for VMware 8.0
    • ]]>         SR 2.8.2/SR 3.3.2 Drop1

    ]]>         Initial Release

    ]]>         Added Gen11 support

    ]]>         TBD

    ]]>
  • This product now changes default number of queues for high core count platforms
  • This product changes the default setting where the GNSS(GNSS_SUPPORT) is disabled now
    • ]]>
  • This product fixes an issue where the virtual function failed to create
  • This product fixes an issue where crash is observed when changing the bonding mode from Balance TLB to 802.3ad
  • This product fixes an issue where the traffic goes to unintended random rx_queues when number of parallel stream increased in iperf even if affinity is set
    • ]]>         TBD

    ]]>         Added support for:

    RedHat Enterprise Linux 8.9

    RedHat Enterprise Linux 9.3

    Updated Driver version 10.02.11.00-k1

    ]]>         Added support for:

    RedHat Enterprise Linux 8.8

    RedHat Enterprise Linux 9.2

    SuSE Linux Enterprise Server 15 SP5

    Updated Driver version 10.02.10.00-k1

    ]]>         TBD

    ]]>         This product now supports  ResetToDefault property(RDE Port Schema).

    ]]>         This product addresses an issue where InterfaceEnabled property is read only and it can't patch this property

    ]]>         Updated to driver version 14.2.589.21-1

    ]]>         Updated to driver version 14.2.589.10-1

    ]]>         Fixed the following behavior:

    Access of a Remote Block Device with the Fibre Channel Driver Kit (LPFC) for HPE Emulex Host Bus Adapters Installed, may Result in inaccessibility of the Paths, When Connected to an Array using T10-DIF.

    For more details, please verify the below advisory link 

    https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-a00134190en_us

    ]]>         TBD

    ]]>
  • This product enhanced the device self-diagnostic matrix and MAC verification.
  • This product enhanced the link-speed calculation for internal variable.
    • ]]>
  • This product addressed some RDE pattern format for some LLDP properties.
  • This product addressed the NC-SI passthrough with BMC when device is under idle mode.
  • This product addressed new mechanism for loading factory default.
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems may enter standby mode in Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where systems may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may enter standby mode on Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where system may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None]]>         TBD

    ]]>
  • This product fixed NCCL(NVIDIA Collective Communication Library) test case by hardware failed when processing multiple Work Request
  • This product fixed the failed to check device capability for atomic operation
    • ]]>         TBD

    ]]>         This product enhanced the compatibility with firmware of FVL9.2.

    ]]>         This product enhanced the compatibility with the latest drivers.

    ]]>         This product now supports VMware vSphere 8.0.

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Enhancements/New Features:

    This is the initial version of the firmware.

    Known Issues:

    None]]>         New drop for 1.24

    ]]>         SR 2.8.2/SR 3.3.2 Drop1

    ]]>         Initial Release

    ]]>         TBD

    ]]>         This product now supports  ResetToDefault property(RDE Port Schema).

    ]]>         This product addresses an issue where InterfaceEnabled property is read only and it can't patch this property

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where Intel® Software Guard Extensions (SGX) Attestation may fail on the 5th Generation Intel® Xeon® Scalable Processors. Software Guard Extensions (SGX) is disabled by default.

    Known Issues:

    None]]>         Added support for the 5th Gen Intel® Xeon® Scalable Processors.

    Added Maximum Memory Bus frequency support to 5600 MT/s for the 5th Gen Intel® Xeon® Scalable Processors.

    Added support for NVMe over Fabrics.

    Added new System Configuration (RBSU) configuration options that allow the system not to create boot options for non-bootable fixed drive.

    Modified System Configuration (RBSU) configuration options that support new license SKU "RAID1 Only" and drop "Standard" SKU for Intel VROC.

    Enhanced the warning messages of "Embedded SATA Configuration" options in RBSU.

    Enhanced the warning messages of "Intel® CPU VMD Support" options in RBSU.

    Added new System Configuration (RBSU) configuration options that could control Intel Trust Domain Extension (TDX) functions.

    Added new System Configuration (RBSU) configuration options that could control the NVMe-oF Software Initiator.

    Added new System Configuration (RBSU) configuration options that could control the PCI-E Data Link Feature Exchange.

    Added new System Configuration (RBSU) configuration options that allow Power Supply Unit fan control.

    Enhanced the help message for System Configuration (RBSU) configuration options for Automatic Power-On.

    Enhanced the help message and status information for System Configuration (RBSU) configuration options for HBM Memory Mode.

    Updated the Processor Capability Indicator in SMBIOS type 197.

    Enhanced POST messages in situations where where unsupported processors are installed.

    Added PCIe Gen2 device in SMBIOS type 9.

    Enhanced SMBIOS type 9 for PCIe retimer device information.

    Displayed the information of first device in SMBIOS type 203 when the PCI slot is bifurcated.

    ]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.005.0 (2.10_11_09_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where system would reboot when hot-added NVMe drives in Linux with Intel® VMD Support enabled.

    Fixed an issue where SMBIOS type 219 showed incorrect feature flags when the Intel® Xeon® CPU Max Series processors are installed.

    Fixed an issue where PCIe fatal error reporting function did not respond correctly.

    Fixed an issue where Intel® TSX Support could not be set with enabled state.

    Fixed an issue where the x2APIC is not enabled for 64-core processors.

    Fixed an issue where the PCIe correctable error message was not displayed in Integrated Management Log (IML).

    Fixed an issue where the OCP retimer slot number was not correctly reported in SMBIOS type 216.

    Known Issues:

    None]]>         TBD

    ]]>         This product enhanced the compatibility with new drivers

    ]]>         TBD

    ]]>
  • This product changed and not issue AP reset during ethtools's reset operation.
  • This product restore phys_port_name format for PF interfaces.
  • This product implement restoring of user filters and implement Toeplitz hashing algorithm to save ntuple filters.
  • This product add changes in the RoCE drive to support rdma driver version query from IPMI interfaces.
  • This product provided fix to restore VxLAN decap flow offload.
  • This product optimized setting of page pool size.
  • This product increased RoCE driver wait time from 1 sec to 5 secs to avoid resource leak.
  • This product disallow dynamic MTU change while netmap application is running.
  • This product now support QoS setting for the SRIOV VLAN.
  • This product introduced environment flag to enable/disable DMA buff feature.
  • This product backported some general patches covering random number generation, devlink, statistics to the OOB driver.
  • This product now deleted all CFA TLS filters when deleting the VNIC.
  • This product improved RoCE Userlib Performance.
  • This product now supports hardware offload for SRv6.
    • ]]>
  • This product fixed an issue that Ping on PF stops when ipv6 underlay flows are created.
  • This product fixed an issue that full list of hardware offloads may not be reported to network stack.
  • This product fixed a ping failure for guest VLAN interface issue by moving the querying of the VF default VLAN before setting up the vnic.
  • This product fixed  uplink ILT rule to avoid TX packet drops.
  • This product fixed RoCE error recovery fails upon injecting error on Thor P425 adapter.
  • This product fixed a system crash observed on rx side for MTU=3k and netmap driver loaded with default buf_size.
  • This product fixed system crash while binding PF back to bnxt_en after after binding it to vfio-pci and launching testpmd due to stack corruption.
  • This product fixed an issue that crash observed while running the ethtool while unloading the driver.
  • This product fixed an issue that crash when processing PTP packets on NPAR functions.
  • This product fixed a firmware crash while validating NIC teaming traffic after error recovery in the RoCE driver.
  • This product fixed a build issue in 5.8 kernel.
  • This product fixed compile error for older Linux kernels (version < 5.3)
    • ]]>
  • Update maximum continuous operation temperature values for host thermal management and reporting.
    • ]]>
  • Added support for Microsoft Server Windows 2022.
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios
    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter 32Gb 02.09.07 09.14.01 7.36 0.0
    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter 32Gb 02.09.07 09.14.01 7.36 0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.09.07 09.14.01 7.36 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.09.07 09.14.01 7.36 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios
    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter 32Gb 02.08.05 09.12.01 7.34 0.0
    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter 32Gb 02.08.05 09.12.01 7.34 0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.08.05 09.12.01 7.34 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.08.05 09.12.01 7.34 0.0

    Non-disruptive firmware upgrades: non-disruptive firmware updates is enabled and will not require a server reboot to apply.

    Added support for:

    RedHat Enterprise Linux 8.8

    RedHat Enterprise Linux 9.2

    SuSE Linux Enterprise Server 15 SP5

    ]]>         Fixed the following behavior:

    Temperature Misreading: the adapter was reading incorrect reading of the temperature on the HPE SN1610Q 32Gb Fibre Channel Host Bus adapter's Small Form-factor Pluggable. The symptom would result in a temperature spike and potentially reset the system

    ]]>         Driver version 5.4.82.0

    ]]>         Driver version 5.4.81.2_1

    ]]>
  • Addition of new SNMP trap (id# 6146) and Redfish event for runtime Mezzanine card failures on Synergy servers
  • Implemented Reconnect button in iLO UI for enabling customers to manually reconnect to HPE GreenLake for Compute Ops Management
  • In-band IPMI support for SLES 15 operating system on RL300 platforms
  • Configuration to allow disabling/enabling all weak ciphers and key lengths for SSH and TLS interfaces in Production security mode
    • ]]>         None

    ]]>
  • OpenSSL v1.0.2 in iLO FW is patched with Extended Master Secret support for TLS1.2
  • Updated the Eventing mechanism for State Transitions for Security Parameters for Security Dashboard
  • Boot time reduction on HPE ProLiant AMD based Gen11 systems by enabling support for BIOS eMCR feature
  • Redfish includes direct attach backplane in Fabric collection
  • Redfish schema amendments for DMTF compliance
  • Support for Prescott NDR200 IB/200G Ethernet dual-port QSFP112 adapter
  • Support for Intel Emerald Rapids and Sapphire Rapids EE LCC
    • ]]>
  • Slowness due to continuously polling on timer expiry leading to increased CPU utilization
  • Added timestamp register call before iLO starts VSP logging to file to fix iLO VSP locks-up after an iLO reset if there is output displayed during the iLO reset
  • Firmware update fails through iLO web interface due to loss of network connectivity to iLO. You can now retry after 5 minutes when the network connectivity with iLO is restored
  • Existing subscriptions with HPE GreenLake for Compute Ops Management and HPE OneView is corrupt after upgrade to iLO 6 v1.54
  • PSU firmware upgrade flashing failure for Titanium PSUs
    • ]]>         TBD

    ]]>         This product correct an issue which the component can't read the current driver version.

    ]]>
  • Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
    • ]]>
  • Firmware addresses a hot plug reporting concern
    • ]]>         TBD

    ]]>
  • This product fixed NCCL(NVIDIA Collective Communication Library) test case by hardware failed when processing multiple Work Request
  • This product fixed the failed to check device capability for atomic operation
    • ]]>         TBD

    ]]>
  • Fixes the logic bug in the media cache cleaning abort handling that caused the drive to choose and execute the R/W command before the Request Sense to prevent assert.
    • ]]>
  • Firmware addresses a hot plug reporting concern
    • ]]>         TBD

    ]]>
  • This product enhances to add the compatibility with RHEL 8.7.
  • This product adds to support HPE MicroServer Gen11
    • ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios
    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter 32Gb 02.09.07 09.14.01 7.36 0.0
    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter 32Gb 02.09.07 09.14.01 7.36 0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.09.07 09.14.01 7.36 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.09.07 09.14.01 7.36 0.0
    ]]>         This Firmware package contains following firmware versions:

    Adapter

    Speed

    MBI

    Firmware

    UEFI

    Boot Bios
    HPE SN1610Q 32Gb Dual Port Fibre Channel Host Bus Adapter 32Gb 02.08.05 09.12.01 7.34 0.0
    HPE SN1610Q 32Gb Single Port Fibre Channel Host Bus Adapter 32Gb 02.08.05 09.12.01 7.34 0.0
    HPE SN1700Q 64Gb Dual Port Fibre Channel Host Bus Adapter 64Gb 02.08.05 09.12.01 7.34 0.0
    HPE SN1700Q 64Gb Single Port Fibre Channel Host Bus Adapter 64Gb 02.08.05 09.12.01 7.34 0.0

    Non-disruptive firmware upgrades: non-disruptive firmware updates is enabled and will not require a server reboot to apply.

    ]]>         Fixed the following behavior:

    Temperature Misreading: the adapter was reading incorrect reading of the temperature on the HPE SN1610Q 32Gb Fibre Channel Host Bus adapter's Small Form-factor Pluggable. The symptom would result in a temperature spike and potentially reset the system

    ]]>         TBD

    ]]>         This product correct an issue which the component can't read the current driver version.

    ]]>         See the iSUT Release Notes for information about the enhancements added in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the enhancements added in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where the OCP Slot 14 device was not displayed properly and the OCP Slot 21 became redundant from iLO web.

    Known Issues:

    None]]>         Important Notes:

    This version of the System ROM should be paired with Server Platform Services (SPS) Firmware 06.01.04.005.0 (2.10_11_09_2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Fixed an issue where Intel® Software Guard Extensions (SGX) Attestation may fail on the 5th Generation Intel® Xeon® Scalable Processors. Software Guard Extensions (SGX) is disabled by default.

    Corrected the default of Workload Profile to be General Power Efficient Compute in the ROM-Based Setup Utility (RBSU).

    Known Issues:

    None

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>         See the iSUT Release Notes for information about the issues resolved in this release

    ]]>
  • This product now supports allocating up to 256 transmit/receive queue pairs.
  • This product now supports generic binary RPM starting from Red Hat Enterprise Linux 8.8.
    • ]]>
  • This product now supports allocating up to 256 transmit/receive queue pairs.
  • This product now supports generic binary RPM starting from Red Hat Enterprise Linux 8.8.
    • ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems may enter standby mode in Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where systems may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may enter standby mode on Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where system may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None]]>         Driver version 5.3.82.0

    This Driver is supported on VMware 7.0U3 only 

    ]]>         Driver version 5.3.81.2_1

    This Driver is supported on VMware 7.0U3 only 

    ]]>         TBD

    ]]>         This product now supports  ResetToDefault property(RDE Port Schema).

    ]]>         This product addresses an issue where InterfaceEnabled property is read only and it can't patch this property

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023) or later.

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where systems may enter standby mode in Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where systems may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None

    ]]>         Important Notes:

    This version of the Server Platform Services (SPS) Firmware contains the latest package for 4th Generation Intel® Xeon® Scalable Processors and 5th Generation Intel® Xeon® Scalable Processors. This version of the SPS should be paired with System ROM 2.10 (11/28/2023).

    Firmware Dependencies:

    None

    Problems Fixed:

    Addressed an issue where system may enter standby mode on Power-On Self-Test (POST) during warm reset cycle.

    Addressed an issue where system may stop responding at "Memory Initialization - Start" during Power-On Self-Test (POST).

    Known Issues:

    None]]>         SR 2.8.2/SR 3.3.2 Drop1

    ]]>
  • Fixed an issue when PSOD occurs while attempting to access memory which had already been released.
  • Fixed an issue where PSOD is observed during array creation and deletion.
  • Fixed an issue where datastore creation using logical drive from VMware client GUI is too slow.
  • Fixed an issue where the Hotswapped HBA drives are detected after 20 minutes or when a manual rescan is done.
    • ]]>
  • Driver update
    • ]]>
  • Added support for Superdome 3200
    • ]]>         Added a system boot-time reduction System Configuration (RBSU) option "System Options/Boot Time Optimizations/AMD eMCR Boot-Time Reduction" and set to "Enabled" by default. This function required iLO firmware revision 1.55 to take effect. This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/AmdEmcr

    Added the System Configuration (RBSU) options "PCIe Device Configuration/Advanced PCIe Configuration/PCIe Data Link Feature/PCIe Slot XX Data Link Feature Exchange" and set to "Enabled" by default. These options can be used to disable Data Link Feature Exchange when a legacy (Gen 3 or older) PCIe card is installed, which is not compatible with this feature. This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/SlotXXDataLinkFeatureExchange

    ]]>         Important Notes:

    This revision of the System ROM updates iSCSI Dxe driver which provides mitigation for security vulnerability documented as CVE-2021-38575.

    Firmware Dependencies:

    None

    Problems Fixed:

    Greyed out the System Configuration (RBSU) option "System Options/Boot Time Optimizations/Extended Memory Test" since it is not supported on HPE DL325/345/365/385 Gen11 servers.

    Greyed out the System Configuration (RBSU) option "Memory Options/Memory PStates" since it is not supported on HPE DL325/345/365/385 Gen11 servers.

    Addressed an issue where SMBIOS type 9 Designation showed an incorrect string when an OCP retimer card was installed.

    Addressed an issue that can result in a system hang while loading defaults when a user default was saved before.

    Addressed an issue where system memory training failed with certain DIMMs.

    Known Issues:

    None

    ]]>         Added a system boot-time reduction System Configuration (RBSU) option "System Options/Boot Time Optimizations/AMD eMCR Boot-Time Reduction" and set to "Enabled" by default. This function required iLO firmware revision 1.55 to take effect. This setting has the following Redfish properties:

    /redfish/v1/systems/1/bios/settings/AmdEmcr

    ]]>         Important Notes:

    None

    Firmware Dependencies:

    None

    Problems Fixed:

    Greyed out the System Configuration (RBSU) option "System Options/Boot Time Optimizations/Extended Memory Test" since it is not supported on HPE DL325/345/365/385 Gen11 servers.

    Greyed out the System Configuration (RBSU) option "Memory Options/Memory PStates" since it is not supported on HPE DL325/345/365/385 Gen11 servers.

    Addressed an issue where SMBIOS type 9 Designation showed an incorrect string when an OCP retimer card was installed.

    Addressed an issue that can result in a system hang while loading defaults when a user default was saved before.

    Addressed an issue where system memory training failed with certain DIMMs.

    Known Issues:

    None

    ]]>         Updated to driver version 14.2.537.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019

    ]]>         Updated to driver version 14.0.534.0

    The raw driver files can be obtained by extracting the Smart Component and then extracting the Emulex installer.  Use this command:

        elxdrvr-fc-version.exe /q2 extract=2

    The extracted files are located:

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version

    Each kit folder has subsequent architecture folders with subsequent OS folders.  For example,

        C:\Users\Administrator\Documents\Emulex\Drivers\FC-version\x64\win2019

    ]]>         Added support for:

    RedHat Enterprise Linux 8.9

    RedHat Enterprise Linux 9.3

    Updated Driver version 10.02.11.00-k1

    ]]>         updated to the version: 10.02.10.00_k1-90

    ]]>         New version 1.10

    ]]>
  • Correct CPRSNT assertion timing
  • Block PCIeReset request when auto-mode
  • Correct change count values
    • ]]>
  • Addition of new SNMP trap (id# 6146) and Redfish event for runtime Mezzanine card failures on Synergy servers
  • Implemented Reconnect button in iLO UI for enabling customers to manually reconnect to HPE GreenLake for Compute Ops Management
  • In-band IPMI support for SLES 15 operating system on RL300 platforms
  • Configuration to allow disabling/enabling all weak ciphers and key lengths for SSH and TLS interfaces in Production security mode
    • ]]>         None

    ]]>
  • OpenSSL v1.0.2 in iLO FW is patched with Extended Master Secret support for TLS1.2
  • Updated the Eventing mechanism for State Transitions for Security Parameters for Security Dashboard
  • Boot time reduction on HPE ProLiant AMD based Gen11 systems by enabling support for BIOS eMCR feature
  • Redfish includes direct attach backplane in Fabric collection
  • Redfish schema amendments for DMTF compliance
  • Support for Prescott NDR200 IB/200G Ethernet dual-port QSFP112 adapter
  • Support for Intel Emerald Rapids and Sapphire Rapids EE LCC
    • ]]>
  • Slowness due to continuously polling on timer expiry leading to increased CPU utilization
  • Added timestamp register call before iLO starts VSP logging to file to fix iLO VSP locks-up after an iLO reset if there is output displayed during the iLO reset
  • Firmware update fails through iLO web interface due to loss of network connectivity to iLO. You can now retry after 5 minutes when the network connectivity with iLO is restored
  • Existing subscriptions with HPE GreenLake for Compute Ops Management and HPE OneView is corrupt after upgrade to iLO 6 v1.54
  • PSU firmware upgrade flashing failure for Titanium PSUs
    • ]]>         Added support for:

    RedHat Enterprise Linux 8.9

    RedHat Enterprise Linux 9.3

    Updated Driver version 10.02.11.00-k1

    ]]>         Updated to driver version 10.02.10.00_k1-90

    ]]>         TBD

    ]]>
  • This product enhanced the device self-diagnostic matrix and MAC verification.
  • This product enhanced the link-speed calculation for internal variable.
    • ]]>
  • This product addressed device lost symptom after continuously ungraceful restart on BCM57414 OCP3 adapter.
  • This product addressed some RDE pattern format for some LLDP properties.
  • This product addressed the NC-SI passthrough with BMC when device is under idle mode.
  • This product addressed new mechanism for loading factory default.
    • ]]>