new HPE Firmware Flash for Emulex Fibre Channel Host Bus Adapters for Linux (x64) HPE Firmware Flash for Emulex Fibre Channel Host Bus Adapters Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server Red Hat Enterprise Linux 8 Server SUSE Linux Enterprise Server 15 Storage Server Firmware - Storage Fibre Channel English (US) Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hpe.com/storage/spock/ 

The target environment must have the libHBAAPI Package installed prior to the installation of the firmware as the discovery of adapters might not complete without the library. (If not already present, the libHBAAPI Package can be obtained from the operating system installation media.)

 

Additional requirements:

Environment must be running the syslog daemon for the flash engine to run
Environment must have 32-bit netlink library (libnl.so) installed for component to be able to discover Emulex Host Bus Adapters(HBAs)

]]> Firmware installation is a two-step process.  Install the firmware installation tool rpm, then execute the installed tool to update the firmware.
 
 1. Install the firmware installation tool:  rpm -Uvh <rpm_package_name>.rpm  This extracts the firmware installation tool to /usr/lib/x86_64-linux-gnu (64-bit systems) .
 
 2. cd to the appropriate location for your system, and update the firmware by executing ./setup
 
 When the firmware installation completes, you may remove the firmware installation tool from your system using the rpm -e command : rpm -e <rpm_package_name>.

]]> 10DF F400 1590 0368 10DF F400 1590 0367 10DF F400 1590 02D5 10DF F400 1590 02D6 installer Reboot is required after installation for updates to take effect and hardware stability to be maintained. 180 firmware:emulex firmware-fc-emulex-2022.08.01-2.1.x86_64.rpm firmware-fc-emulex-2022.08.01-2.1.x86_64.rpm file://./packages/firmware-fc-emulex-2022.08.01-2.1.x86_64.rpm ./usr/lib/x86_64-linux-gnu/firmware-fc-emulex-2022.08.01-2.1 ./usr/lib/x86_64-linux-gnu/firmware-fc-emulex-2022.08.01-2.1/.cpq_package.inc ./usr/lib/x86_64-linux-gnu/firmware-fc-emulex-2022.08.01-2.1/.setup ./usr/lib/x86_64-linux-gnu/firmware-fc-emulex-2022.08.01-2.1/CP062160.xml ./usr/lib/x86_64-linux-gnu/firmware-fc-emulex-2022.08.01-2.1/elxflashStandalone-linux-14.0.499.25-1.zip ./usr/lib/x86_64-linux-gnu/firmware-fc-emulex-2022.08.01-2.1/firmware ./usr/lib/x86_64-linux-gnu/firmware-fc-emulex-2022.08.01-2.1/firmware/P14049925.grp ./usr/lib/x86_64-linux-gnu/firmware-fc-emulex-2022.08.01-2.1/fwmatrix.txt ./usr/lib/x86_64-linux-gnu/firmware-fc-emulex-2022.08.01-2.1/hpe_fw_matrix.xml ./usr/lib/x86_64-linux-gnu/firmware-fc-emulex-2022.08.01-2.1/hpsetup ./usr/lib/x86_64-linux-gnu/firmware-fc-emulex-2022.08.01-2.1/payload.json ./usr/lib/x86_64-linux-gnu/firmware-fc-emulex-2022.08.01-2.1/readme.txt ./usr/lib/x86_64-linux-gnu/firmware-fc-emulex-2022.08.01-2.1/reference.xml ./usr/lib/x86_64-linux-gnu/firmware-fc-emulex-2022.08.01-2.1/setup ./usr/lib/x86_64-linux-gnu/hp-scexe-compat ./usr/lib/x86_64-linux-gnu/hp-scexe-compat/CP062160.scexe ./usr/lib/x86_64-linux-gnu/scexe-compat ./usr/lib/x86_64-linux-gnu/scexe-compat/CP062160.scexe 79F0C163-0C13-4662-9DEA-09235FEF90CB HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 1 .//firmware//P14049925.grp 180 1 True Firmware True a6b1a447-382a-5a4f-10DF-F40015900368 14.0.499.25 HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 1 .//firmware//P14049925.grp 180 1 True Firmware True a6b1a447-382a-5a4f-10DF-F40015900367 14.0.499.25 HPE SN1610E 32Gb 1-port Fibre Channel Host Bus Adapter 1 .//firmware//P14049925.grp 180 1 True Firmware True a6b1a447-382a-5a4f-10DF-F400159002D5 14.0.499.25 HPE SN1610E 32Gb 2-port Fibre Channel Host Bus Adapter 1 .//firmware//P14049925.grp 180 1 True Firmware True a6b1a447-382a-5a4f-10DF-F400159002D6 14.0.499.25 ComboFirmware Uefi RuntimeAgent new HPE Broadcom NetXtreme-E Online Firmware Upgrade Utility for VMware HPE Broadcom NetXtreme-E Online Firmware Upgrade Utility for VMware Hewlett Packard Enterprise VMware ESXi 7.0 VMware ESXi 8.0 ServerOptions Networking Server Firmware - Network English (US) This product requires the appropriate driver for your device and operating system be installed before firmware is updated.

]]> Manual installation instructions:

  1. Copy the Smart Component (CPxxxxxx.zip) to the ESXi host to a location with plenty of free space. (Example: "/tmp")
  2. Navigate to the location where the CPxxxxxx.zip file was copied in step 1.
  3. Unzip the CPxxxxxx.zip file.
  4. Install the VMware component.
    • a. For ESXi 7.0 targets: esxcli  software component apply –d <fully_qualified_path>/CPxxxxxx_VMw.zip. (Example: "esxcli software component apply –d /tmp/CPxxxxxx_VMware.zip")
    • b. For ESXi 6.x targets: esxcli software vib install –d <fully_qualified_path>/CPxxxxxx_VMw.zip. (Example: "esxcli software vib install –d /tmp/CPxxxxxx_VMw.zip")
  5. .Navigate to the location where the component is installed. (Example: "cd /opt/Smart_Component/CPxxxxxx")
  6. Execute the component with the command set options  s, -f, -e, -g,  etc. if required. When execution is complete the flash engine will have performed the flash operation as directed.
  7. Clean up the Smart Component:
    • a. Navigate out of /opt/Smart_Component/CPxxxxx to some other location. (Example: "/tmp")
    • b. To clean up the Smart Component:
      • i.For ESXi 7.0 targets: esxcli software component remove –n Smart-Component-CPxxxxxx
      • ii.For ESXi 6.x targets: esxcli software vib remove –n CPxxxxxx
    • c.Remove the directories associated with CPxxxxxx: rm -rf /opt/Smart_Component/CPxxxxxx
  8. If reboot is required to complete the firmware installation, reboot your system.
]]> 14E4 16D8 14E4 1593 14E4 16D8 14E4 1592 14E4 16EE 14E4 1592 14E4 16EE 14E4 1593 14E4 16EF 14E4 1593 14E4 16EF 14E4 1592 14E4 16D6 14E4 1595 14E4 16D6 14E4 1594 14E4 16DE 14E4 1595 14E4 16EB 14E4 1595 14E4 16DE 14E4 1594 14E4 16EB 14E4 1594 14E4 16D7 14E4 1597 14E4 16D7 14E4 1596 14E4 16EC 14E4 1597 14E4 16EC 14E4 1596 14E4 16ED 14E4 1596 14E4 16ED 14E4 1597 14E4 1751 14E4 1599 14E4 1751 14E4 1598 14e4 1804 14e4 1598 14e4 1801 14e4 1598 14e4 1804 14e4 1599 14e4 1801 14e4 1599 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic CP062143.zip CP062143.zip file://./packages/CP062143.zip CP062143_BUILD_3.data CP062143.vmexe64 CP062143.vmfile CP062143_VMw.zip CP062143.xml payload.json CP062143_VMw.zip/index.xml CP062143_VMw.zip/vendor-index.xml CP062143_VMw.zip/metadata.zip CP062143_VMw.zip/vib20/CP062143/HPE_bootbank_CP062143_226.1.107.0.3-8.0.0.20613240.vib CP062143_VMw.zip/metadata.zip/vendor-index.xml CP062143_VMw.zip/metadata.zip/vmware.xml CP062143_VMw.zip/metadata.zip/vibs/CP062143-5578131184078003426.xml CP062143_VMw.zip/metadata.zip/bulletins/Smart-Component-CP062143_226.1.107.0.3-8.0.0.20613240.xml 3.0 2024-07-22T02:24:42.948805 Smart-Component-CP062143_226.1.107.0.3-8.0.0.20613240 HPE Smart Component CP062143 general enhancement important extension HPE Broadcom NetXtreme-E Online Firmware Upgrade Utility for VMware http://www.hpe.com HPEVMwareSupport@groups.ext.hpe.com 2024-07-22T02:20:48.149000+00:00 1.4.5 HPE_bootbank_CP062143_226.1.107.0.3-8.0.0.20613240 CP062143 226.1.107.0.3-8.0.0.20613240 HPE bootbank CP062143 - Online firmware for Broadcom NIC on ESXi 7.0 8.0 false false false firmware sdkname:hexdk sdkversion:8.0.0-20613240 epkname:esxpackagingkit epkversion:8.0.0-20615152 vib20/CP062143/HPE_bootbank_CP062143_226.1.107.0.3-8.0.0.20613240.vib 9733432 sha-256 8c6a43509046c84d207f38264fe83653818b8dd4118e2c8ea633f161c37a7baa 79F0C163-0C13-4662-9DEA-09235FEF90CB HPE Ethernet 10Gb 2-port BaseT BCM57416 Adapter 1 .//nic_fw//BCM957416A4162HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16D814E41593 226.1.107.0 HPE Ethernet 10Gb 2-port BaseT BCM57416 OCP3 Adapter 1 .//nic_fw//BCM957416N4160HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16D814E41592 226.1.107.0 HPE NPAR BaseT BCM57416 OCP3 Adapter 1 .//nic_fw//BCM957416N4160HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16EE14E41592 226.1.107.0 HPE NPAR BaseT BCM57416 Adapter 1 .//nic_fw//BCM957416A4162HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16EE14E41593 226.1.107.0 HPE NPAR RoCE BaseT BCM57416 Adapter 1 .//nic_fw//BCM957416A4162HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16EF14E41593 226.1.107.0 HPE NPAR RoCE BaseT BCM57416 OCP3 Adapter 1 .//nic_fw//BCM957416N4160HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16EF14E41592 226.1.107.0 HPE Ethernet 10Gb 2-port SFP+ BCM57412 Adapter 1 .//nic_fw//BCM957412A4121HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16D614E41595 226.1.107.0 HPE Ethernet 10Gb 2-port SFP+ BCM57412 OCP3 Adapter 1 .//nic_fw//BCM957412N4120HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16D614E41594 226.1.107.0 HPE NPAR SFP+ BCM57412 Adapter 1 .//nic_fw//BCM957412A4121HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16DE14E41595 226.1.107.0 HPE NPAR RoCE SFP+ BCM57412 Adapter 1 .//nic_fw//BCM957412A4121HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16EB14E41595 226.1.107.0 HPE NPAR SFP+ BCM57412 OCP3 Adapter 1 .//nic_fw//BCM957412N4120HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16DE14E41594 226.1.107.0 HPE NPAR RoCE SFP+ BCM57412 OCP3 Adapter 1 .//nic_fw//BCM957412N4120HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16EB14E41594 226.1.107.0 HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 Adapter 1 .//nic_fw//BCM957414A4142HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16D714E41597 226.1.107.0 HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 OCP3 Adapter 1 .//nic_fw//BCM957414N4140HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16D714E41596 226.1.107.0 HPE NPAR SFP28 BCM57414 Adapter 1 .//nic_fw//BCM957414A4142HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16EC14E41597 226.1.107.0 HPE NPAR SFP28 BCM57414 OCP3 Adapter 1 .//nic_fw//BCM957414N4140HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16EC14E41596 226.1.107.0 HPE NPAR RoCE SFP28 BCM57414 OCP3 Adapter 1 .//nic_fw//BCM957414N4140HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16ED14E41596 226.1.107.0 HPE NPAR RoCE SFP28 BCM57414 Adapter 1 .//nic_fw//BCM957414A4142HC.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-16ED14E41597 226.1.107.0 Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE 1 .//nic_fw//BCM957504A504H.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-175114E41599 226.1.107.0 Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE 1 .//nic_fw//BCM957504N504H.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-175114E41598 226.1.107.0 HPE NPAR RoCE BCM57504 SFP28 OCP3 Adapter 1 .//nic_fw//BCM957504N504H.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-180414E41598 226.1.107.0 HPE NPAR BCM57504 SFP28 OCP3 Adapter 1 .//nic_fw//BCM957504N504H.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-180114E41598 226.1.107.0 HPE NPAR RoCE BCM57504 SFP28 Adapter 1 .//nic_fw//BCM957504A504H.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-180414E41599 226.1.107.0 HPE NPAR BCM57504 SFP28 Adapter 1 .//nic_fw//BCM957504A504H.pkg 360 1 True Firmware False a6b1a447-382a-5a4f-14E4-180114E41599 226.1.107.0 ComboFirmware RuntimeAgent changed Online ROM Flash Component for VMware ESXi - HPE Smart Array P408i-p, P408e-p, P408i-a, E208i-p, E208e-p, E208i-a, P816i-a SR Gen10 HPE Smart Array P408i-p, P408e-p, P408i-a, E208i-p, E208e-p, E208i-a, P816i-a SR Gen10 Hewlett Packard Enterprise VMware ESXi 7.0 VMware ESXi 8.0 Storage Server Firmware - Storage Controller French,English (US),German,Italian,Japanese,Spanish  

To use Smart Update Manager from the Service Pack for ProLiant:

     Offline (The SPP Offline mode boots a special Linux OS environment, thus the Linux Smart Components are used, not the VMware Smart Components):

  • Place the Service Pack for ProLiant on a USB key using the USB Key Utility for Windows.
  • Place the desired Linux firmware component to be updated in the directory, /packages on the USB key.
  • Boot from the newly created Service Pack for ProLiant USB key.
  • Follow Smart Update Manager steps to complete firmware update.

     Remote Online:

  • Download the appropriate SPP.
  • Add the component to the SPP.
  • Mount the SPP on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated.
  • Run SUM.
  • Add the ESXi host to be updated as a remote target/node.
  • Enter IP or DNS address of the ESXi host to be updated Enter the ESXi host credentials (root or administrator username and password).
  • For SUM 6.0 and newer, select both the Additional Package with the added component and the SPP Baseline on the node Inventory page.
  • Follow Smart Update Manager Steps and complete the firmware update.

To update firmware from VMware ESXi operating system on target server:

  • Enable Tech Support Mode on the ESXi host.
  • Login as root. (You must be root in order to apply the update.)
  • Place the Smart Component zip file in a temporary directory.
  • Unzip the file CPXXXXXX.zip
  • Ensure that CPXXXXXX.vmexe is executable by using the command:

             chmod +x CPXXXXXX.vmexe    

  • From the same directory, execute the Smart Component. For example: ./CPXXXXXX.vmexe
  • Follow the directions given by the Smart Component.
  • Logout
  • Disable Tech Support Mode on the ESXi host.

Additional information to execute VIB file.

Commands required to execute VIB file on ESXi 7.0

  • Installing vib file : esxcli software component apply  –d <full path>/CPxxxxxx_VMw.zip.
  • Executing the binary from path “/opt/Smart_Component/CPxxxxxx” : ./Execute_Component with command set options -s, -f, -e, -g etc. if required.
  • Removing vib file : esxcli software component remove –n Smart-Component-CPxxxxxx
  • After removing the vib, we need to manually remove the folders using : rm –rf /opt/Smart_Component/CPxxxxxx

<full path> is the temporary directory path where zip file was unpacked CPxxxxxx.zip

]]> That package versions within () for the same firmware version include the same firmware binary image. Users don’t need to reflash the same firmware version.

]]> 9005 028F 103C 0700 9005 028F 103C 0601 9005 028F 103C 0602 9005 028F 103C 0603 9005 028F 103C 0600 9005 028F 103C 1101 9005 028F 103C 1100 9005 028F 103C 0651 9005 028F 103C 0654 9005 028F 103C 0652 9005 028F 103C 0650 CP057475.scexe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 300 firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware CP057475.zip CP057475.zip file://./packages/CP057475.zip CP057475_BUILD_1.data CP057475.vmexe CP057475.vmexe64 CP057475.vmfile CP057475_VMw.zip CP057475.xml payload.json CP057475_VMw.zip/index.xml CP057475_VMw.zip/vendor-index.xml CP057475_VMw.zip/metadata.zip CP057475_VMw.zip/vib20/CP057475/HPE_bootbank_CP057475_5.61.1-8.0.0.20143090.vib CP057475_VMw.zip/metadata.zip/vendor-index.xml CP057475_VMw.zip/metadata.zip/vmware.xml CP057475_VMw.zip/metadata.zip/vibs/CP057475-9169829809237985849.xml CP057475_VMw.zip/metadata.zip/bulletins/Smart-Component-CP057475_5.61.1-8.0.0.20143090.xml 3.0 2023-06-08T11:05:00.504422 Smart-Component-CP057475_5.61.1-8.0.0.20143090 HPE Smart Component CP057475 general enhancement important extension Online ROM Flash Component for VMware ESXi - HPE Smart Array P408i-p, P408e-p, P408i-a, E208i-p, E208e-p, E208i-a, P816i-a SR Gen10 http://www.hpe.com HPEVMwareSupport@groups.ext.hpe.com 2023-06-08T10:57:24.240000+00:00 1.4.5 HPE_bootbank_CP057475_5.61.1-8.0.0.20143090 CP057475 5.61.1-8.0.0.20143090 HPE bootbank CP057475 - Online firmware for HPE_SA_CTRL on ESXi 7.0.0 8.0.0 false false false firmware vib20/CP057475/HPE_bootbank_CP057475_5.61.1-8.0.0.20143090.vib 12064366 sha-256 a1a45de4a6678c89e42f9bf08165430c57ec9fd8f518d0c43f9678da10c4c684 79F0C163-0C13-4662-9DEA-09235FEF90CB HPE Smart Array P816i-a SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c1100 5.61 HPE Smart Array P416ie-m SR G10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c1101 5.61 HPE Smart Array P408e-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0601 5.61 HPE Smart Array P408i-c SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0603 5.61 HPE Smart Array P408i-a SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0602 5.61 HPE Smart Array P408i-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0600 5.61 HPE Smart Array P204i-c SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0700 5.61 HPE Smart Array E208i-c SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0652 5.61 HPE Smart Array E208e-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0651 5.61 HPE Smart Array E208i-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0650 5.61 HPE Smart Array E208i-a SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0654 5.61 ComboFirmware RuntimeAgent new HPE Broadcom NetXtreme-E Online Firmware Upgrade Utility for Linux x86_64 HPE Broadcom NetXtreme-E Online Firmware Upgrade Utility for Linux x86_64 SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 8 Server Red Hat Enterprise Linux 9 Server ServerOptions Networking Server Firmware - Network English (US) This product requires the appropriate driver for your device and operating system to be installed before the firmware is updated.
Also, install the Out of Box (OOB) and ensure the driver is loaded and running before attempting the firmware update.

  • Follow the command line to bring up ethernet device:

# ifup ethX or ifconfig ethX up or wicked ifup ethX

If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.

  • For example in sles15sp1, To create ifcfg-ethX files under /etc/sysconfig/network/
]]> Updating adapter firmware with rpm installed:

  • Install this NIC firmware rpm with the following command: rpm -ivh <rpm_filename>.rpm. 

This command will extract the contents to "/usr/lib/x86_64-linux-gnu."
The CP056670.scexe script is located in the "scexe-compat'' folder. Further information is available in CP062142.txt file in the "firmware-nic-*" folder. The actual name of the "firmware-nic-*" folder is based on the version of the rpm to be installed.  

  • To install the firmware, execute ONE of the following commands:
    • ./CP062142.scexe in the "/usr/lib/x86_64-linux-gnu/scexe-compat" location.
    • ./setup in the "firmware-nic-*" location.   

  • To uninstall this rpm, execute the folllowing command: rpm -e <rpm_package_name>

Updating adapter firmware without installing the rpm:

  • Extract the contents of the rpm with the following command: rpm2cpio <rpm_filename>.rpm | cpio -id

This will extract the contents of the rpm to the "usr" folder in the current directory.

  • Navigate to the "usr/lib/x86_64-linux-gnu/firmware-nic-*" location and run ./setup to update the firmware. The actual name of the 'firmware-nic-*' folder is based on the version of the rpm.

Additional Information:

  • The results of the firmware upgrade are saved in CP062142.log at "/var/cpq/."
  • The Device ID will change when NPAR (NIC Partitioning) mode is enabled. Accordingly adapters with DID 0x16D7 and 0x16D8 will change to 0x16EC and 0x16EE respectively if  NPAR is enabled but RoCE is disabled and to 0x16ED and 0x16EF respectively if NPAR is enabled and RoCE is also enabled.
  • Network connectivity may stop during the firmware upgrade process and may need to be restarted after completion.
  • Installing the firmware rpm package (rpm -ivh) does not update the adapter firmware. Installing the rpm merely extracts the rpm content to the local system. Updating the adapter firmware requires following the steps outlined above.
  • When upgrading firmware, refer to Revision History and upgrade it to the following version as stepping up the ladder until the version needed.

 

]]> This software package contains NVM Image version 226.1.107.0 with the following firmware versions:

 

NIC Bootcode Version NCSI Version MBA Version UEFI Version RoCE Version
HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 OCP3 Adapter 226.0.145.0
 		 226.0.145.0
 		 226.0.135.0
 		 226.0.135.0
 		  226.0.145.0
 
HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 Adapter
HPE Ethernet 10Gb 2-port BaseT BCM57416 OCP3 Adapter
HPE Ethernet 10Gb 2-port BaseT BCM57416 Adapter
HPE Ethernet 10Gb 2-port SFP+ BCM57412 OCP3 Adapter
HPE Ethernet 10Gb 2-port SFP+ BCM57412 Adapter
HPE Ethernet 10/25Gb 4-port SFP28 BCM57504 Adapter
HPE Ethernet 10/25Gb 4-port SFP28 BCM57504 OCP3 Adapter

 

]]> 14E4 16D8 14E4 1593 14E4 16D8 14E4 1592 14E4 16EE 14E4 1592 14E4 16EE 14E4 1593 14E4 16EF 14E4 1593 14E4 16EF 14E4 1592 14E4 16D6 14E4 1595 14E4 16D6 14E4 1594 14E4 16EB 14E4 1594 14E4 16DE 14E4 1594 14E4 16EB 14E4 1595 14E4 16DE 14E4 1595 14E4 16D7 14E4 1597 14E4 16D7 14E4 1596 14E4 16EC 14E4 1597 14E4 16EC 14E4 1596 14E4 16ED 14E4 1596 14E4 16ED 14E4 1597 14E4 1751 14E4 1599 14E4 1751 14E4 1598 14e4 1804 14e4 1598 14e4 1801 14e4 1598 14e4 1804 14e4 1599 14e4 1801 14e4 1599 14E4 1751 14E4 5100 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic firmware-nic-bcm-nxe-226.1.107.0-1.1.x86_64.rpm firmware-nic-bcm-nxe-226.1.107.0-1.1.x86_64.rpm file://./packages/firmware-nic-bcm-nxe-226.1.107.0-1.1.x86_64.rpm ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1 ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/.cpq_package.inc ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/.setup ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/CP062142.txt ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/CP062142.xml ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/deps ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/deps/libs ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/deps/libs/libbrcm_hpfwupg.so ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/hpsetup ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/nic_fw ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/nic_fw/BCM957412A4121HC.pkg ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/nic_fw/BCM957412N4120HC.pkg ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/nic_fw/BCM957414A4142HC.pkg ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/nic_fw/BCM957414N4140HC.pkg ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/nic_fw/BCM957416A4162HC.pkg ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/nic_fw/BCM957416N4160HC.pkg ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/nic_fw/BCM957504A504H.pkg ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/nic_fw/BCM957504N504H.pkg ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/payload.json ./usr/lib/x86_64-linux-gnu/firmware-nic-bcm-nxe-226.1.107.0-1.1/setup ./usr/lib/x86_64-linux-gnu/hp-scexe-compat ./usr/lib/x86_64-linux-gnu/hp-scexe-compat/CP062142.scexe ./usr/lib/x86_64-linux-gnu/scexe-compat ./usr/lib/x86_64-linux-gnu/scexe-compat/CP062142.scexe 79F0C163-0C13-4662-9DEA-09235FEF90CB HPE Ethernet 10Gb 2-port BaseT BCM57416 Adapter 1 .//nic_fw//BCM957416A4162HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16D814E41593 226.1.107.0 HPE Ethernet 10Gb 2-port BaseT BCM57416 OCP3 Adapter 1 .//nic_fw//BCM957416N4160HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16D814E41592 226.1.107.0 HPE NPAR BaseT BCM57416 OCP3 Adapter 1 .//nic_fw//BCM957416N4160HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EE14E41592 226.1.107.0 HPE NPAR BaseT BCM57416 Adapter 1 .//nic_fw//BCM957416A4162HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EE14E41593 226.1.107.0 HPE NPAR RoCE BaseT BCM57416 Adapter 1 .//nic_fw//BCM957416A4162HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EF14E41593 226.1.107.0 HPE NPAR RoCE BaseT BCM57416 OCP3 Adapter 1 .//nic_fw//BCM957416N4160HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EF14E41592 226.1.107.0 HPE Ethernet 10Gb 2-port SFP+ BCM57412 Adapter 1 .//nic_fw//BCM957412A4121HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16D614E41595 226.1.107.0 HPE Ethernet 10Gb 2-port SFP+ BCM57412 OCP3 Adapter 1 .//nic_fw//BCM957412N4120HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16D614E41594 226.1.107.0 HPE NPAR RoCE SFP+ BCM57412 OCP3 Adapter 1 .//nic_fw//BCM957412N4120HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EB14E41594 226.1.107.0 HPE NPAR SFP+ BCM57412 OCP3 Adapter 1 .//nic_fw//BCM957412N4120HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16DE14E41594 226.1.107.0 HPE NPAR RoCE SFP+ BCM57412 Adapter 1 .//nic_fw//BCM957412A4121HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EB14E41595 226.1.107.0 HPE NPAR SFP+ BCM57412 Adapter 1 .//nic_fw//BCM957412A4121HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16DE14E41595 226.1.107.0 HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 Adapter 1 .//nic_fw//BCM957414A4142HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16D714E41597 226.1.107.0 HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 OCP3 Adapter 1 .//nic_fw//BCM957414N4140HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16D714E41596 226.1.107.0 HPE NPAR SFP28 BCM57414 Adapter 1 .//nic_fw//BCM957414A4142HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EC14E41597 226.1.107.0 HPE NPAR SFP28 BCM57414 OCP3 Adapter 1 .//nic_fw//BCM957414N4140HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EC14E41596 226.1.107.0 HPE NPAR RoCE SFP28 BCM57414 OCP3 Adapter 1 .//nic_fw//BCM957414N4140HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16ED14E41596 226.1.107.0 HPE NPAR RoCE SFP28 BCM57414 Adapter 1 .//nic_fw//BCM957414A4142HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16ED14E41597 226.1.107.0 Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE 1 .//nic_fw//BCM957504A504H.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-175114E41599 226.1.107.0 Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE 1 .//nic_fw//BCM957504N504H.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-175114E41598 226.1.107.0 HPE NPAR RoCE BCM57504 SFP28 OCP3 Adapter 1 .//nic_fw//BCM957504N504H.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-180414E41598 226.1.107.0 HPE NPAR BCM57504 SFP28 OCP3 Adapter 1 .//nic_fw//BCM957504N504H.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-180114E41598 226.1.107.0 HPE NPAR RoCE BCM57504 SFP28 Adapter 1 .//nic_fw//BCM957504A504H.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-180414E41599 226.1.107.0 HPE NPAR BCM57504 SFP28 Adapter 1 .//nic_fw//BCM957504A504H.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-180114E41599 226.1.107.0 Broadcom BCM957504 100G 1P QSFP56 OCP3 adapter 1 .//nic_fw//BCM957504N504H.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-175114E45100 226.1.107.0 ComboFirmware Uefi RuntimeAgent new HPE Firmware Flash for Emulex Fibre Channel Host Bus Adapters for Microsoft Windows Server 2019/2022 x64 HPE Firmware Flash for Emulex Fibre Channel Host Bus Adapters Hewlett Packard Enterprise Microsoft Windows Server 2019 Microsoft Windows Server 2022 Storage Server Firmware - Storage Fibre Channel English (US) Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hpe.com/storage/spock/

The HPE supplied Emulex driver must be installed prior to this firmware component being identified by SUM for deployment. The OOB driver is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/

]]> Download the Smart Component to a directory on your hard drive and change to that directory.
The downloaded file is a self-extracting executable with a filename based on the Component Number.
From that drive and directory, execute the downloaded file.

Click the "Install" button to proceed with the installation.

]]> 10DF F400 1590 0368 10DF F400 1590 0367 10DF F400 1590 02D5 10DF F400 1590 02D6 cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 180 firmware:emulex cp050063.exe cp050063.exe file://./packages/cp050063.exe cp050063.xml cpqsetup.exe elxflashStandalone-windows-14.0.499.25-1/firmware/ elxflashStandalone-windows-14.0.499.25-1/firmware/P14049925.grp elxflashStandalone-windows-14.0.499.25-1/win/ elxflashStandalone-windows-14.0.499.25-1/win/elxflash.bat elxflashStandalone-windows-14.0.499.25-1/win/winlpcfg.bat elxflashStandalone-windows-14.0.499.25-1/win/x64/ elxflashStandalone-windows-14.0.499.25-1/win/x64/elxflash.exe elxflashStandalone-windows-14.0.499.25-1/win/x64/ElxLpCfgSvcMsg.dll elxflashStandalone-windows-14.0.499.25-1/win/x64/libdfc.dll elxflashStandalone-windows-14.0.499.25-1/win/x64/readme.txt elxflashStandalone-windows-14.0.499.25-1/win/x64/RM.INI elxflashStandalone-windows-14.0.499.25-1/win/x64/WinLpCfg.exe fwmatrix.txt elxflashStandalone-windows-14.0.499.25-1/win/x64/fwmatrix.txt hpe_fw_matrix.xml installer.dll payload.json readme.txt reference.xml 79F0C163-0C13-4662-9DEA-09235FEF90CB HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 1 elxflashStandalone-windows-14.0.499.25-1//firmware//P14049925.grp 180 1 True Firmware True a6b1a447-382a-5a4f-10DF-F40015900368 14.0.499.25 HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 1 elxflashStandalone-windows-14.0.499.25-1//firmware//P14049925.grp 180 1 True Firmware True a6b1a447-382a-5a4f-10DF-F40015900367 14.0.499.25 HPE SN1610E 32Gb 1-port Fibre Channel Host Bus Adapter 1 elxflashStandalone-windows-14.0.499.25-1//firmware//P14049925.grp 180 1 True Firmware True a6b1a447-382a-5a4f-10DF-F400159002D5 14.0.499.25 HPE SN1610E 32Gb 2-port Fibre Channel Host Bus Adapter 1 elxflashStandalone-windows-14.0.499.25-1//firmware//P14049925.grp 180 1 True Firmware True a6b1a447-382a-5a4f-10DF-F400159002D6 14.0.499.25 ComboFirmware Uefi RuntimeAgent changed Online ROM Flash Component for Windows (x64) - HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, P204i-c, E208i-p, E208e-p, E208i-a, E208i-c, P816i-a, P416ie-m SR Gen10 HPE Smart Array P408i-p, P408e-p, P408i-a, P408i-c, P204i-c, E208i-p, E208e-p, E208i-a, E208i-c, P816i-a, P416ie-m SR Gen10 Hewlett Packard Enterprise Microsoft Windows Server 2019 Microsoft Windows Server 2022 Microsoft Windows Server 2025 Storage Server Firmware - Storage Controller French,English (US),German,Italian,Japanese,Spanish To update firmware from Windows operating system on target server:

  • Place the Smart Component in a temporary directory.
  • Double-click on the Smart Component.
  • Follow the directions given by the Smart Component.
  • Reboot your system if you would like the update to take effect immediately.

To use HPE Smart Update Manager from the Service Pack for ProLiant :

  • Place the desired firmware to be updated in the directory, \SPP20xxxxx\packages
  • Run launch_sum.bat script which is found in the root of the ISO
  • Follow the instructions on the screen

 

]]> That package versions within () for the same firmware version include the same firmware binary image. Users don’t need to reflash the same firmware version.

]]> 9005 028F 103C 0700 9005 028F 103C 0601 9005 028F 103C 0602 9005 028F 103C 0603 9005 028F 103C 0600 9005 028F 103C 1101 9005 028F 103C 1100 9005 028F 103C 0651 9005 028F 103C 0654 9005 028F 103C 0652 9005 028F 103C 0650 cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 300 firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware cp062298.exe cp062298.exe file://./packages/cp062298.exe cp062298.xml cpqsetup.exe HPE_luxor_5.61.bin.fw payload.json setup.dll 79F0C163-0C13-4662-9DEA-09235FEF90CB HPE Smart Array P816i-a SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware True a6b1a447-382a-5a4f-9005-028f103c1100 5.61 HPE Smart Array P416ie-m SR G10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware True a6b1a447-382a-5a4f-9005-028f103c1101 5.61 HPE Smart Array P408e-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware True a6b1a447-382a-5a4f-9005-028f103c0601 5.61 HPE Smart Array P408i-c SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware True a6b1a447-382a-5a4f-9005-028f103c0603 5.61 HPE Smart Array P408i-a SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware True a6b1a447-382a-5a4f-9005-028f103c0602 5.61 HPE Smart Array P408i-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware True a6b1a447-382a-5a4f-9005-028f103c0600 5.61 HPE Smart Array P204i-c SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware True a6b1a447-382a-5a4f-9005-028f103c0700 5.61 HPE Smart Array E208e-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware True a6b1a447-382a-5a4f-9005-028f103c0651 5.61 HPE Smart Array E208i-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware True a6b1a447-382a-5a4f-9005-028f103c0650 5.61 HPE Smart Array E208i-a SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware True a6b1a447-382a-5a4f-9005-028f103c0654 5.61 HPE Smart Array E208i-c SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware True a6b1a447-382a-5a4f-9005-028f103c0652 5.61 ComboFirmware Uefi RuntimeAgent new HPE Firmware Flash for Emulex Fibre Channel Host Bus Adapters for VMware vSphere 7.0 HPE Firmware Flash for Emulex Fibre Channel Host Bus Adapters Hewlett Packard Enterprise VMware ESXi 7.0 Storage Server Firmware - Storage Fibre Channel English (US) Please consult SPOCK for a list of supported configurations available at the following link:

http://www.hpe.com/storage/spock/

]]> To use Smart Update Manager from the Service Pack for ProLiant:
Offline:

  • Service Pack ProLiant Offline mode boots a special Linux OS environment, thus the Linux Smart Component are used, not the VMware Smart Components

Remote Online, if the component is supported by SUM but is not yet part of an SPP:

  • Download the appropriate Service Pack for ProLiant
  • Add the component to the Service Pack for ProLiant
  • Mount the Service Pack for ProLiant on a remote server running Windows or Linux that has a network connection to the ESXi host to be updated
  • Run Smart Update Manager via launch_sum.bat for Windows or launch_sum.sh for Linux
  • Add the ESXi host to be updated as a remote target/node
  • Enter the IP or DNS address of the ESXi host to be updated if the ESXi host is Gen9 Server or Enter the IP or DNS address of the iLO of the ESXi host if the Sever is Gen10 and above
  • Enter the ESXi host/iLO credentials (root or administrator username and password) based on Gen9/Gen10 and above
  • For Smart Update Manager 6.0 and newer, select both the Additional Package with the added component and the Service Pack for ProLiant Baseline on the node Inventory page.
  • Follow Smart Update Manager Steps and complete the firmware update.
  • Refer to the Service Pack for ProLiant Documentation for detailed instructions at: www.hpe.com/servers/spp/download

 

To use HPE Insight Control for vCenter :

  • Log in to the vSphere Client.
  • Select a server or cluster in the inventory tree.
  • Click the HPE Insight Management tab.
  • Follow Insight Control for vCenter steps to update firmware using a Smart Component

 

To update firmware from VMware ESXi operating system on target server:

  • Enable Tech Support Mode on the ESXi host.
  • Login as root. (You must be root in order to apply the ROM update.)
  • Place the Smart Component (CPxxxxxx.zip) in a temporary directory.
  • From the same directory, unzip the Smart Component.
    • unzip CPxxxxxx.zip
  • The smart component includes CPxxxxx_VMw.zip which consists of VIB which needs to be installed to perform firmware installation
  • Ensure that the file CPxxxxxx_VMw.zip is executable. Execute the command:
    • chmod +x CPxxxxxx_VMw.zip
  • To perform the standalone installation, execute the command:
  • esxcli software vib install -d /<path_of_CPxxxxxx_VMw.zip>/CPxxxxxx_VMw.zip
  • Once the installation completes, change directory to /opt/Smart_Component/<CPxxxxxx>. Execute the comand:
    • cd /opt/Smart_Component/<CPxxxxxx>
  • To perform standalone installation of the firmware,Execute the command:
    • ./ Execute_Component
  • Follow the directions given by the Smart Component
  • Logout
  • Disable Tech Support Mode on the ESXi host
  • Reboot your system, if required, for the firmware update to take effect
]]> 10DF F400 1590 0368 10DF F400 1590 0367 10DF F400 1590 02D5 10DF F400 1590 02D6 hpsetup Reboot is required after installation for updates to take effect and hardware stability to be maintained. 280 firmware:emulex CP050061.zip CP050061.zip file://./packages/CP050061.zip CP050061_BUILD_24.data CP050061.vmexe CP050061.vmexe64 CP050061.vmfile CP050061_VMw.zip CP050061.xml payload.json CP050061_VMw.zip/index.xml CP050061_VMw.zip/vendor-index.xml CP050061_VMw.zip/metadata.zip CP050061_VMw.zip/vib20/CP050061/HPE_bootbank_CP050061_2022.08.01.24-7.0.0.15843807.vib CP050061_VMw.zip/metadata.zip/vendor-index.xml CP050061_VMw.zip/metadata.zip/vmware.xml CP050061_VMw.zip/metadata.zip/vibs/CP050061--8894347335517287530.xml CP050061_VMw.zip/metadata.zip/bulletins/Smart-Component-CP050061_2022.08.01.24-7.0.0.15843807.xml 3.0 2022-10-14T08:37:10.461871 Smart-Component-CP050061_2022.08.01.24-7.0.0.15843807 HPE Smart Component CP050061 general enhancement important extension HPE Firmware Flash for Emulex Fibre Channel Host Bus Adapters for VMware vSphere 7.0 http://www.hpe.com HPEVMwareSupport@groups.ext.hpe.com 2022-10-14T08:32:54.314000+00:00 1.4.5 HPE_bootbank_CP050061_2022.08.01.24-7.0.0.15843807 CP050061 2022.08.01.24-7.0.0.15843807 HPE bootbank CP050061 - Online firmware for EMULEX FC HBA on ESXi 7.0 false false false vib20/CP050061/HPE_bootbank_CP050061_2022.08.01.24-7.0.0.15843807.vib 1935922 sha-256 a8417e1516f5ed9dee19068957e59046ab674795c54a7eccbc436e68fd7b3bf6 79F0C163-0C13-4662-9DEA-09235FEF90CB HPE SN1700E 64Gb Dual Port Fibre Channel Host Bus Adapter 1 .//Flash//P14049925.grp 280 1 True Firmware False a6b1a447-382a-5a4f-10DF-F40015900368 14.0.499.25 HPE SN1700E 64Gb Single Port Fibre Channel Host Bus Adapter 1 .//Flash//P14049925.grp 280 1 True Firmware False a6b1a447-382a-5a4f-10DF-F40015900367 14.0.499.25 HPE SN1610E 32Gb 1-port Fibre Channel Host Bus Adapter 1 .//Flash//P14049925.grp 280 1 True Firmware False a6b1a447-382a-5a4f-10DF-F400159002D5 14.0.499.25 HPE SN1610E 32Gb 2-port Fibre Channel Host Bus Adapter 1 .//Flash//P14049925.grp 280 1 True Firmware False a6b1a447-382a-5a4f-10DF-F400159002D6 14.0.499.25 ComboFirmware RuntimeAgent new HPE Broadcom NetXtreme-E Online Firmware Upgrade Utility for Windows Server x64 Editions HPE Broadcom NetXtreme-E Online Firmware Upgrade Utility for Windows Server x64 Editions Hewlett Packard Enterprise Microsoft Windows Server 2019 Microsoft Windows Server 2022 Microsoft Windows Server 2025 ServerOptions Networking Server Firmware - Network English (US),Japanese This product requires the appropriate driver for your device and operating system be installed before firmware is updated.

]]> Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

From that drive and directory, execute the downloaded file.

 

Click the "Install" button to proceed with the installation.

 

Network connectivity may stop during the upgrade process and may need to be restarted after completion.

Additional Information:

  • When upgrading firmware, refer to Revision History and upgrade it to the following version as stepping up the ladder until the version needed.
]]> 14E4 16D8 14E4 1593 14E4 16D8 14E4 1592 14E4 16EF 14E4 1593 14E4 16EE 14E4 1592 14E4 16EF 14E4 1592 14E4 16EE 14E4 1593 14E4 16D6 14E4 1595 14E4 16D6 14E4 1594 14E4 16DE 14E4 1595 14E4 16EB 14E4 1595 14E4 16DE 14E4 1594 14E4 16EB 14E4 1594 14E4 16D7 14E4 1596 14E4 16D7 14E4 1597 14E4 16EC 14E4 1597 14E4 16EC 14E4 1596 14E4 16ED 14E4 1596 14E4 16ED 14E4 1597 14E4 1751 14E4 1599 14E4 1751 14E4 1598 14e4 1804 14e4 1598 14e4 1801 14e4 1598 14e4 1804 14e4 1599 14e4 1801 14e4 1599 cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic cp062144.exe cp062144.exe file://./packages/cp062144.exe bcmefwupg.exe brcm_hpfwupg.dll brcm_hp_eventlog.dll cp062144.xml cpqsetup.exe FW/ FW/BCM957412A4121HC.pkg FW/BCM957412N4120HC.pkg FW/BCM957414A4142HC.pkg FW/BCM957414N4140HC.pkg FW/BCM957416A4162HC.pkg FW/BCM957416N4160HC.pkg FW/BCM957504A504H.pkg FW/BCM957504N504H.pkg FW/firmware.json ja/ ja/NICOFUT.chm libxml2.dll NICOFUT.chm OnlineFWUpgrade.dll payload.json zh-CN/ zh-CN/NICOFUT.chm 79F0C163-0C13-4662-9DEA-09235FEF90CB HPE Ethernet 10Gb 2-port BaseT BCM57416 Adapter 1 .//FW//BCM957416A4162HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16D814E41593 226.1.107.0 HPE Ethernet 10Gb 2-port BaseT BCM57416 OCP3 Adapter 1 .//FW//BCM957416N4160HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16D814E41592 226.1.107.0 HPE NPAR RoCE BaseT BCM57416 Adapter 1 .//FW//BCM957416A4162HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EF14E41593 226.1.107.0 HPE NPAR BaseT BCM57416 OCP3 Adapter 1 .//FW//BCM957416N4160HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EE14E41592 226.1.107.0 HPE NPAR RoCE BaseT BCM57416 OCP3 Adapter 1 .//FW//BCM957416N4160HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EF14E41592 226.1.107.0 HPE NPAR BaseT BCM57416 Adapter 1 .//FW//BCM957416A4162HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EE14E41593 226.1.107.0 HPE Ethernet 10Gb 2-port SFP+ BCM57412 Adapter 1 .//FW//BCM957412A4121HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16D614E41595 226.1.107.0 HPE Ethernet 10Gb 2-port SFP+ BCM57412 OCP3 Adapter 1 .//FW//BCM957412N4120HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16D614E41594 226.1.107.0 HPE NPAR SFP+ BCM57412 Adapter 1 .//FW//BCM957412A4121HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16DE14E41595 226.1.107.0 HPE NPAR RoCE SFP+ BCM57412 Adapter 1 .//FW//BCM957412A4121HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EB14E41595 226.1.107.0 HPE NPAR SFP+ BCM57412 OCP3 Adapter 1 .//FW//BCM957412N4120HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16DE14E41594 226.1.107.0 HPE NPAR RoCE SFP+ BCM57412 OCP3 Adapter 1 .//FW//BCM957412N4120HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EB14E41594 226.1.107.0 HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 OCP3 Adapter 1 .//FW//BCM957414N4140HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16D714E41596 226.1.107.0 HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 Adapter 1 .//FW//BCM957414A4142HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16D714E41597 226.1.107.0 HPE NPAR SFP28 BCM57414 Adapter 1 .//FW//BCM957414A4142HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EC14E41597 226.1.107.0 HPE NPAR SFP28 BCM57414 OCP3 Adapter 1 .//FW//BCM957414N4140HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16EC14E41596 226.1.107.0 HPE NPAR RoCE SFP28 BCM57414 OCP3 Adapter 1 .//FW//BCM957414N4140HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16ED14E41596 226.1.107.0 HPE NPAR RoCE SFP28 BCM57414 Adapter 1 .//FW//BCM957414A4142HC.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-16ED14E41597 226.1.107.0 Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE 1 .//FW//BCM957504A504H.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-175114E41599 226.1.107.0 Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE 1 .//FW//BCM957504N504H.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-175114E41598 226.1.107.0 HPE NPAR RoCE BCM57504 SFP28 OCP3 Adapter 1 .//FW//BCM957504N504H.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-180414E41598 226.1.107.0 HPE NPAR BCM57504 SFP28 OCP3 Adapter 1 .//FW//BCM957504N504H.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-180114E41598 226.1.107.0 HPE NPAR RoCE BCM57504 SFP28 Adapter 1 .//FW//BCM957504A504H.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-180414E41599 226.1.107.0 HPE NPAR BCM57504 SFP28 Adapter 1 .//FW//BCM957504A504H.pkg 360 1 True Firmware True a6b1a447-382a-5a4f-14E4-180114E41599 226.1.107.0 ComboFirmware Uefi RuntimeAgent changed Online ROM Flash Component for Linux (x64) - HPE Smart Array P408i-p, P408e-p, P408i-a, E208i-p, E208e-p, E208i-a, P816i-a SR Gen10 HPE Smart Array P408i-p, P408e-p, P408i-a, E208i-p, E208e-p, E208i-a, P816i-a SR Gen10 Hewlett Packard Enterprise Red Hat Enterprise Linux 8 Server SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server Storage Server Firmware - Storage Controller French,English (US),German,Italian,Japanese,Spanish To update firmware from Linux operating system on target server:

Updating firmware with rpm installed:

  • Install the firmware rpm using the command:  rpm -ivh <rpm_filename>.  This extracts the contents of the rpm to the '/usr/lib/x86_64-linux-gnu' location
  • The CPXXXXXX.scexe script is located in the 'scexe-compat' folder. The actual name of the 'firmware-smartarray-xxxxxxxxxx-*' folder is based on the version of the rpm installed in the first step above
  • To install firmware, you can execute ONE of the following commands:
    • ./ CPXXXXXX.scexe in the '/usr/lib/x86_64-linux-gnu/scexe-compat' location (OR)
    • ./setup in the '/usr/lib/x86_64-linux-gnu/firmware-smartarray-xxxxxxxxxx-*' location
  • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory
  • To uninstall the rpm, run the command: rpm -e <rpm_package_name>, which is the rpm filename without the '.rpm' extension

Updating firmware without installing the rpm:

  • Extract the contents of the rpm using the command: rpm2cpio <rpm_filename>.rpm | cpio -id.  This extracts the contents of the rpm to 'usr' folder in the current directory
  • Navigate to the 'usr/lib/x86_64-linux-gnu/firmware-smartarray-xxxxxxxxxx-*' location and run ./setup to update the firmware. The actual name of the 'firmware-smartarray-xxxxxxxxxx-*' folder is based on the version of the rpm installed in the step above
  • The results of the firmware upgrade are saved to the Component.log file, located in the /var/cpq/ directory

Additional Information:

Installing the firmware rpm package (rpm -ivh) does not update the firmware.  It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.

 

To use Smart Update Manager from the Service Pack for ProLiant:

Offline:

  • Place the Service Pack for ProLiant on a USB key using the USB Key Utility for Windows.
  • Place the desired firmware to be updated in the directory, /SPP20xxxxx/packages on the USB key.
  • Boot from the newly created Service Pack for Proliant USB key.
  • Follow Smart Update Manager steps to complete firmware update.

Online:

  • Login as root. (You must be root in order to apply the ROM update.)
  • Place the desired firmware to be updated in the directory, /SPP20xxxxx/packages
  • Run launch_sum.sh script which is found in the root of the ISO
  • Follow the instructions on the screen

 

]]> That package versions within () for the same firmware version include the same firmware binary image. Users don’t need to reflash the same firmware version.

]]> 9005 028F 103C 0700 9005 028F 103C 0601 9005 028F 103C 0602 9005 028F 103C 0603 9005 028F 103C 0600 9005 028F 103C 1101 9005 028F 103C 1100 9005 028F 103C 0651 9005 028F 103C 0654 9005 028F 103C 0652 9005 028F 103C 0650 CP060000.scexe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 300 firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware firmware-smartarray-f7c07bdbbd-5.61-5.1.x86_64.rpm firmware-smartarray-f7c07bdbbd-5.61-5.1.x86_64.rpm file://./packages/firmware-smartarray-f7c07bdbbd-5.61-5.1.x86_64.rpm ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-5.1 ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-5.1/.cpq_package.inc ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-5.1/.setup ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-5.1/CP060000.xml ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-5.1/HPE_luxor_5.61.bin.fw ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-5.1/hpsetup ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-5.1/libsetup.so ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-5.1/payload.json ./usr/lib/x86_64-linux-gnu/firmware-smartarray-f7c07bdbbd-5.61-5.1/setup ./usr/lib/x86_64-linux-gnu/hp-scexe-compat ./usr/lib/x86_64-linux-gnu/hp-scexe-compat/CP060000.scexe ./usr/lib/x86_64-linux-gnu/scexe-compat ./usr/lib/x86_64-linux-gnu/scexe-compat/CP060000.scexe 79F0C163-0C13-4662-9DEA-09235FEF90CB HPE Smart Array P816i-a SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c1100 5.61 HPE Smart Array P416ie-m SR G10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c1101 5.61 HPE Smart Array P408e-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0601 5.61 HPE Smart Array P408i-c SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0603 5.61 HPE Smart Array P408i-a SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0602 5.61 HPE Smart Array P408i-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0600 5.61 HPE Smart Array P204i-c SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0700 5.61 HPE Smart Array E208e-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0651 5.61 HPE Smart Array E208i-p SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0650 5.61 HPE Smart Array E208i-a SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0654 5.61 HPE Smart Array E208i-c SR Gen10 Controller 10 False HPE_luxor_5.61.bin.fw 300 1 True Firmware False a6b1a447-382a-5a4f-9005-028f103c0652 5.61 ComboFirmware RuntimeAgent