new Intelファームウェアパッケージfor E810-XXVDA4 Ethernet 10/25Gb 4ポートSFP28アダプター Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter Intelファームウェアパッケージfor E810-XXVDA4 Ethernet 10/25Gb 4ポートSFP28アダプター Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 ネットワーク Networking サーバ Server ファームウェア - ネットワーク Firmware - Network 英語（US） English (US) 以下のいずれかの方法を使用してPLDMファームウェアをフラッシュします

iLOrestツールを使用したフラッシュ
Smart Update Manager（SUM）を使用したフラッシュ
iLO GUIからのフラッシュ

1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンを見つけてダウンロードするには、https://support.hpe.comを参照してください。

ローカルホストOSの例：
ilorest flashfwpkg

リモートの例：
ilorest flashfwpkg --url -u -p

2. このファームウェアパッケージは、Smart Update Manager(SUM)の最新バージョンでもインストールできます。

サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。

USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。

通常の手順でファームウェアおよびソフトウェアをアップデートします。

アップデートを直ちに有効にするにはシステムを再起動してください。

3. iLO GUIからのフラッシュ

任意のブラウザーを使用してiLO IPを参照し、資格情報を使用してログインします
PLDMでサポートされているアダプターがサーバーに存在していることを確認します
iLO GUIに移動します -> 左側から[Firmware and OS software]をクリックします -> [Update Firmware]をクリックします -> [Choose File]をクリックして、サポートされているPLDMファイルを参照します -> [Flash]ボタンをクリックします。
アップデートステータスが上部に表示され、インテグレーテッドマネジメントログ（IML）にログエントリが記録されます。
ファームウェアアップデートを有効にするためにサーバーを再起動します。

追加情報:

ファームウェアをアップデートする場合は、リビジョン履歴を参照し、必要なバージョンまで1つずつアップデートしていきます。

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

Additional Information:

When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.

]]> このソフトウェアパッケージは、以下にリストされるサポートされるネットワークアダプターの次のファームウェアのバージョンを含みます：

NIC	EEPROM ID	OROMバージョン	NVMバージョン
Intel E810-XXVDA4 Ethernet 10/25Gb 4ポートSFP28アダプター	8001D8B5	1.3597.0	4.50

NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.5と示されます

]]> This software package contains the following firmware versions for the below listed supported network adapters:

NIC	EEPROM ID	OROM Version	NVM Version
Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter	8001D8B5	1.3597.0	4.50

In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.5

]]> 8086 1593 8086 0005 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_XXVDA4_FH_4p50_PLDMoMCTP_8001D8B5.fwpkg HPE_E810_XXVDA4_FH_4p50_PLDMoMCTP_8001D8B5.fwpkg file://./packages/HPE_E810_XXVDA4_FH_4p50_PLDMoMCTP_8001D8B5.fwpkg HPE_E810_XXVDA4_FH_4p50_PLDMoMCTP_8001D8B5.HPb HPE_E810_XXVDA4_FH_4p50_PLDMoMCTP_8001D8B5.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-XXVDA4 adapter 0 True HPE_E810_XXVDA4_FH_4p50_PLDMoMCTP_8001D8B5.HPb 360 1 True True True Firmware True a6b1a447-382a-5a4f-8086-159380860005 4.50 FWPKG-v2 Firmware Bmc new Intelファームウェアパッケージfor E810-CQDA2 Ethernet 100Gb 2ポートQSFP28アダプター Intel Firmware Package For E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter Intelファームウェアパッケージfor E810-CQDA2 Ethernet 100Gb 2ポートQSFP28アダプター Intel Firmware Package For E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 ネットワーク Networking サーバ Server ファームウェア - ネットワーク Firmware - Network 英語（US） English (US) 以下のいずれかの方法を使用してPLDMファームウェアをフラッシュします

iLOrestツールを使用したフラッシュ
Smart Update Manager（SUM）を使用したフラッシュ
iLO GUIからのフラッシュ

ローカルホストOSの例：
ilorest flashfwpkg

リモートの例：
ilorest flashfwpkg --url -u -p

2. このファームウェアパッケージは、Smart Update Manager(SUM)の最新バージョンでもインストールできます。

USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。

通常の手順でファームウェアおよびソフトウェアをアップデートします。

アップデートを直ちに有効にするにはシステムを再起動してください。

3. iLO GUIからのフラッシュ

任意のブラウザーを使用してiLO IPを参照し、資格情報を使用してログインします
PLDMでサポートされているアダプターがサーバーに存在していることを確認します
iLO GUIに移動します -> 左側から[Firmware and OS software]をクリックします -> [Update Firmware]をクリックします -> [Choose File]をクリックして、サポートされているPLDMファイルを参照します -> [Flash]ボタンをクリックします。
アップデートステータスが上部に表示され、インテグレーテッドマネジメントログ（IML）にログエントリが記録されます。
ファームウェアアップデートを有効にするためにサーバーを再起動します。

追加情報:

ファームウェアをアップデートする場合は、リビジョン履歴を参照し、必要なバージョンまで1つずつアップデートしていきます。

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

Additional Information:

When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.

]]> このソフトウェアパッケージは、以下にリストされるサポートされるネットワークアダプターの次のファームウェアのバージョンを含みます：

NIC	EEPROM ID	OROMバージョン	NVMバージョン
Intel E810-CQDA2 Ethernet 100Gb 2ポートQSFP28アダプター	8001D8B6	1.3597.0	4.50

NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.5と示されます

]]> This software package contains the following firmware versions for the below listed supported network adapters:

NIC	EEPROM ID	OROM Version	NVM Version
Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter	8001D8B6	1.3597.0	4.50

In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.5

]]> 8086 1592 8086 0002 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_CQDA2_4p50_PLDMoMCTP_8001D8B6.fwpkg HPE_E810_CQDA2_4p50_PLDMoMCTP_8001D8B6.fwpkg file://./packages/HPE_E810_CQDA2_4p50_PLDMoMCTP_8001D8B6.fwpkg HPE_E810_CQDA2_4p50_PLDMoMCTP_8001D8B6.HPb HPE_E810_CQDA2_4p50_PLDMoMCTP_8001D8B6.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-CQDA2 adapter 0 True HPE_E810_CQDA2_4p50_PLDMoMCTP_8001D8B6.HPb 360 1 True True True Firmware True a6b1a447-382a-5a4f-8086-159280860002 4.50 FWPKG-v2 Firmware Bmc new Universal Firmware Package for Drives - VO000960KXNXD, VO001920KXNZQ, VO003840KXNZR, VO007680KXNZT, MO000800KXNXH, MO001600KXNZV, MO003200KXPAA and MO006400KXPAB Universal Firmware Package for Drives - VO000960KXNXD, VO001920KXNZQ, VO003840KXNZR, VO007680KXNZT, MO000800KXNXH, MO001600KXNZV, MO003200KXPAA and MO006400KXPAB Universal Firmware Package for Drives - VO000960KXNXD, VO001920KXNZQ, VO003840KXNZR, VO007680KXNZT, MO000800KXNXH, MO001600KXNZV, MO003200KXPAA and MO006400KXPAB Universal Firmware Package for Drives - VO000960KXNXD, VO001920KXNZQ, VO003840KXNZR, VO007680KXNZT, MO000800KXNXH, MO001600KXNZV, MO003200KXPAA and MO006400KXPAB Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server ストレージ Storage Firmware - PCIe NVMe Storage Disk Firmware - PCIe NVMe Storage Disk 英語（US） English (US) Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> Release Version and/or Date:
     HPS3
Last Recommended or Critical Version:
     HPS1
Previous Version of Firmware:
     HPS1
Enhancements/New Features:
      None

Problems Fixed:
- Improvements to our out-of-band message handling to ensure robust device management capabilities
- Changes to improve our PCIe link compatibility as well as device reliability

Known Issues:
None

]]> Release Version and/or Date:
     HPS3
Last Recommended or Critical Version:
     HPS1
Previous Version of Firmware:
     HPS1
Enhancements/New Features:
      None

Problems Fixed:
- Improvements to our out-of-band message handling to ensure robust device management capabilities
- Changes to improve our PCIe link compatibility as well as device reliability

Known Issues:
None

]]> VO001920KXNZQ VO003840KXNZR VO007680KXNZT MO000800KXNXH MO001600KXNZV MO003200KXPAA MO006400KXPAB VO000960KXNXD アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme Micron_7450_Micron_7450_M7450ALLHPS3.fwpkg Micron_7450_Micron_7450_M7450ALLHPS3.fwpkg file://./packages/Micron_7450_Micron_7450_M7450ALLHPS3.fwpkg Micron_7450_Micron_7450_M7450ALLHPS3.HPb Micron_7450_Micron_7450_M7450ALLHPS3.xml payload.json f6de0320-2e0f-489a-b238-6dd8ae7c3811 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 4d2340a5-304f-3030-3830-304b584e5848 HPS3 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 4d2340a5-304f-3130-3630-304b584e5a56 HPS3 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 4d2340a5-304f-3330-3230-304b58504141 HPS3 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 4d2340a5-304f-3630-3430-304b58504142 HPS3 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 562340a5-304f-3030-3936-304b584e5844 HPS3 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 562340a5-304f-3130-3932-304b584e5a51 HPS3 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 562340a5-304f-3330-3834-304b584e5a52 HPS3 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 562340a5-304f-3730-3638-304b584e5a54 HPS3 FWPKG-v2 ComboFirmware Bmc Uefi new Intelファームウェアパッケージfor E810-XXVDA4 Ethernet 10/25Gb 4ポートSFP28 MCLKアダプター Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK Adapter Intelファームウェアパッケージfor E810-XXVDA4 Ethernet 10/25Gb 4ポートSFP28 MCLKアダプター Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK Adapter Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 ネットワーク Networking サーバ Server ファームウェア - ネットワーク Firmware - Network 英語（US） English (US) 以下のいずれかの方法を使用してPLDMファームウェアをフラッシュします

iLOrestツールを使用したフラッシュ
Smart Update Manager（SUM）を使用したフラッシュ
iLO GUIからのフラッシュ

ローカルホストOSの例：
ilorest flashfwpkg

リモートの例：
ilorest flashfwpkg --url -u -p

2. このファームウェアパッケージは、Smart Update Manager(SUM)の最新バージョンでもインストールできます。

USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。

通常の手順でファームウェアおよびソフトウェアをアップデートします。

アップデートを直ちに有効にするにはシステムを再起動してください。

3. iLO GUIからのフラッシュ

任意のブラウザーを使用してiLO IPを参照し、資格情報を使用してログインします
PLDMでサポートされているアダプターがサーバーに存在していることを確認します
iLO GUIに移動します -> 左側から[Firmware and OS software]をクリックします -> [Update Firmware]をクリックします -> [Choose File]をクリックして、サポートされているPLDMファイルを参照します -> [Flash]ボタンをクリックします。
アップデートステータスが上部に表示され、インテグレーテッドマネジメントログ（IML）にログエントリが記録されます。
ファームウェアアップデートを有効にするためにサーバーを再起動します。

追加情報:

ファームウェアをアップデートする場合は、リビジョン履歴を参照し、必要なバージョンまで1つずつアップデートしていきます。

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

Additional Information:

When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.

]]> このソフトウェアパッケージは、以下にリストされるサポートされるネットワークアダプターの次のファームウェアのバージョンを含みます：

NIC	EEPROM ID	OROMバージョン	NVMバージョン
Intel E810-XXVDA4 Ethernet 10/25Gb 4ポートSFP28 MCLKアダプターfor HPE	8001D8BB	1.3597.0	4.50

NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.5と示されます

]]> This software package contains the following firmware versions for the below listed supported network adapters:

NIC	EEPROM ID	OROM Version	NVM Version
Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK Adapter for HPE	8001D8BB	1.3597.0	4.50

In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.5

]]> 8086 1593 8086 000E アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_XXV4T_O_SEC_4p50_PLDMoMCTP_8001D8BB.fwpkg HPE_E810_XXV4T_O_SEC_4p50_PLDMoMCTP_8001D8BB.fwpkg file://./packages/HPE_E810_XXV4T_O_SEC_4p50_PLDMoMCTP_8001D8BB.fwpkg HPE_E810_XXV4T_O_SEC_4p50_PLDMoMCTP_8001D8BB.HPb HPE_E810_XXV4T_O_SEC_4p50_PLDMoMCTP_8001D8BB.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-XXVDA4T adapter 0 True HPE_E810_XXV4T_O_SEC_4p50_PLDMoMCTP_8001D8BB.HPb 360 1 True True True Firmware True a6b1a447-382a-5a4f-8086-15938086000e 4.50 FWPKG-v2 Firmware Bmc changed Agentless Management Service (iLO5, iLO 6) for SUSE Linux Enterprise Server 15 Agentless Management Service (iLO5, iLO 6) for SUSE Linux Enterprise Server 15 ams_sles15 ams_sles15 Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Lights Out Lights Out サーバ Server ソフトウェア - システムマネジメント Software - System Management 英語（US） English (US)

amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.

amsd provides information to the iLO 5 and iLO 6 service providing SNMP support.

]]>

amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.

amsd provides information to the iLO 5 and iLO 6 service providing SNMP support.

]]> システム管理者（root）としてログインし、RPMをハードディスク上のディレクトリにダウンロードした後、そのディレクトリに移動します。

パッケージをインストールするには、次のようにタイプします。
- rpm -Uvh amsd-.rpm
パッケージが正しくロードされているか、以下をタイプして確認します。
- systemctl status amsd
- systemctl status smad
以下のコマンドを実行してヘルプを参照してください。
- man amsd

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:
- rpm -Uvh amsd-<version>.rpm
To check whether the package is loaded properly type:
- systemctl status amsd
- systemctl status smad
Additional help is available by typing:
- man amsd

iLOrestツールを使用したフラッシュ
Smart Update Manager（SUM）を使用したフラッシュ
iLO GUIからのフラッシュ

ローカルホストOSの例：
ilorest flashfwpkg

リモートの例：
ilorest flashfwpkg --url -u -p

2. このファームウェアパッケージは、Smart Update Manager(SUM)の最新バージョンでもインストールできます。

USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。

通常の手順でファームウェアおよびソフトウェアをアップデートします。

アップデートを直ちに有効にするにはシステムを再起動してください。

3. iLO GUIからのフラッシュ

任意のブラウザーを使用してiLO IPを参照し、資格情報を使用してログインします
PLDMでサポートされているアダプターがサーバーに存在していることを確認します
iLO GUIに移動します -> 左側から[Firmware and OS software]をクリックします -> [Update Firmware]をクリックします -> [Choose File]をクリックして、サポートされているPLDMファイルを参照します -> [Flash]ボタンをクリックします。
アップデートステータスが上部に表示され、インテグレーテッドマネジメントログ（IML）にログエントリが記録されます。
ファームウェアアップデートを有効にするためにサーバーを再起動します。

追加情報:

ファームウェアをアップデートする場合は、リビジョン履歴を参照し、必要なバージョンまで1つずつアップデートしていきます。

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

Additional Information:

When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.

]]> このソフトウェアパッケージは、以下にリストされるサポートされるネットワークアダプターの次のファームウェアのバージョンを含みます：

NIC	EEPROM ID	OROMバージョン	NVMバージョン
Intel E810-2CQDA2 Ethernet 100Gb 2ポートQSFP28アダプター	8001D8B4	1.3597.0	4.50

NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.5と示されます

]]> This software package contains the following firmware versions for the below listed supported network adapters:

NIC	EEPROM ID	OROM Version	NVM Version
Intel E810-2CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter	8001D8B4	1.3597.0	4.50

In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.5

]]> 8086 1592 8086 000E アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_2CQDA2_O_SEC_4p50_PLDMoMCTP_8001D8B4.fwpkg HPE_E810_2CQDA2_O_SEC_4p50_PLDMoMCTP_8001D8B4.fwpkg file://./packages/HPE_E810_2CQDA2_O_SEC_4p50_PLDMoMCTP_8001D8B4.fwpkg HPE_E810_2CQDA2_O_SEC_4p50_PLDMoMCTP_8001D8B4.HPb HPE_E810_2CQDA2_O_SEC_4p50_PLDMoMCTP_8001D8B4.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-2CQDA2 adapter 0 True HPE_E810_2CQDA2_O_SEC_4p50_PLDMoMCTP_8001D8B4.HPb 360 1 True True True Firmware True a6b1a447-382a-5a4f-8086-15928086000e 4.50 FWPKG-v2 Firmware Bmc new ROM Flash Firmware Package - HPE ProLiant DL320/DL340 Gen12 SP (U69) Servers ROM Flash Firmware Package - HPE ProLiant DL320/DL340 Gen12 SP (U69) Servers HPE ProLiant DL320//DL340 Gen12 SP (U69) Servers HPE ProLiant DL320//DL340 Gen12 SP (U69) Servers Hewlett Packard Enterprise Hewlett Packard Enterprise サーバ Server BIOS - System ROM BIOS - System ROM 英語（US） English (US) To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>

This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately.

]]> To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>

This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately.

]]> cpqsetup.exe アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 300 firmware:system U69_1.10_08_09_2024.fwpkg U69_1.10_08_09_2024.fwpkg file://./packages/U69_1.10_08_09_2024.fwpkg payload.json U69_1.10_08_09_2024.signed.flash U69_1.10_08_09_2024.xml aa148d2e-6e09-453e-bc6f-63baa5f5ccc4 System BIOS - U69 0 True U69_1.10_08_09_2024.signed.flash 300 1 False True True False Firmware True 00000000-0000-0000-0000-000000000261 v1.10 (08/09/2024) System BIOS - U69 0 True U69_1.10_08_09_2024.signed.flash 300 1 False True True False Firmware True 00000000-0000-0000-0000-000000000263 v1.10 (08/09/2024) FWPKG-v2 ComboFirmware Bmc new Intelファームウェアパッケージfor E810-CQDA2 Ethernet 100Gb 2ポートQSFP28 OCP3アダプター Intel Firmware Package For E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter Intelファームウェアパッケージfor E810-CQDA2 Ethernet 100Gb 2ポートQSFP28 OCP3アダプター Intel Firmware Package For E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 ネットワーク Networking サーバ Server ファームウェア - ネットワーク Firmware - Network 英語（US） English (US) 以下のいずれかの方法を使用してPLDMファームウェアをフラッシュします

iLOrestツールを使用したフラッシュ
Smart Update Manager（SUM）を使用したフラッシュ
iLO GUIからのフラッシュ

ローカルホストOSの例：
ilorest flashfwpkg

リモートの例：
ilorest flashfwpkg --url -u -p

2. このファームウェアパッケージは、Smart Update Manager(SUM)の最新バージョンでもインストールできます。

USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。

通常の手順でファームウェアおよびソフトウェアをアップデートします。

アップデートを直ちに有効にするにはシステムを再起動してください。

3. iLO GUIからのフラッシュ

任意のブラウザーを使用してiLO IPを参照し、資格情報を使用してログインします
PLDMでサポートされているアダプターがサーバーに存在していることを確認します
iLO GUIに移動します -> 左側から[Firmware and OS software]をクリックします -> [Update Firmware]をクリックします -> [Choose File]をクリックして、サポートされているPLDMファイルを参照します -> [Flash]ボタンをクリックします。
アップデートステータスが上部に表示され、インテグレーテッドマネジメントログ（IML）にログエントリが記録されます。
ファームウェアアップデートを有効にするためにサーバーを再起動します。

追加情報:

ファームウェアをアップデートする場合は、リビジョン履歴を参照し、必要なバージョンまで1つずつアップデートしていきます。

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

Additional Information:

When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.

]]> このソフトウェアパッケージは、以下にリストされるサポートされるネットワークアダプターの次のファームウェアのバージョンを含みます：

NIC	EEPROM ID	OROMバージョン	NVMバージョン
Intel E810-CQDA2 Ethernet 100Gb 2ポートQSFP28 OCP3アダプター	8001D8BC	1.3597.0	4.50

NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.5と示されます

]]> This software package contains the following firmware versions for the below listed supported network adapters:

NIC	EEPROM ID	OROM Version	NVM Version
Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter	8001D8BC	1.3597.0	4.50

In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.5

]]> 8086 1592 8086 0006 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_CQDA2_OCP_4p50_NCSIwPLDMoMCTP_8001D8BC.fwpkg HPE_E810_CQDA2_OCP_4p50_NCSIwPLDMoMCTP_8001D8BC.fwpkg file://./packages/HPE_E810_CQDA2_OCP_4p50_NCSIwPLDMoMCTP_8001D8BC.fwpkg HPE_E810_CQDA2_OCP_4p50_NCSIwPLDMoMCTP_8001D8BC.HPb HPE_E810_CQDA2_OCP_4p50_NCSIwPLDMoMCTP_8001D8BC.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-CQDA2 OCP3 adapter 0 True HPE_E810_CQDA2_OCP_4p50_NCSIwPLDMoMCTP_8001D8BC.HPb 360 1 True True True Firmware True a6b1a447-382a-5a4f-8086-159280860006 4.50 FWPKG-v2 Firmware Bmc new Universal Firmware Package for Drives - EO000400KYDKV and EO000800KYDLA Universal Firmware Package for Drives - EO000400KYDKV and EO000800KYDLA Universal Firmware Package for Drives - EO000400KYDKV and EO000800KYDLA Universal Firmware Package for Drives - EO000400KYDKV and EO000800KYDLA Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server ストレージ Storage Firmware - PCIe NVMe Storage Disk Firmware - PCIe NVMe Storage Disk 英語（US） English (US) Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> Release Version and/or Date:
HPK4
Problems Fixed:

Reverted HDDQ spec 10.5.3 features to maintain compliance to OCP spec commands over NVMe-MI
Implemented real Active Measured Latency by adding OCP 2.0 C3 Log page

Known Issues:
None

]]> Release Version and/or Date:
HPK4
Problems Fixed:

Reverted HDDQ spec 10.5.3 features to maintain compliance to OCP spec commands over NVMe-MI
Implemented real Active Measured Latency by adding OCP 2.0 C3 Log page

Known Issues:
None

]]> EO000400KYDKV EO000800KYDLA アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme Intel_P5800_4IASHPK4.fwpkg Intel_P5800_4IASHPK4.fwpkg file://./packages/Intel_P5800_4IASHPK4.fwpkg Intel_P5800_4IASHPK4.HPb Intel_P5800_4IASHPK4.xml payload.json f6de0320-2e0f-489a-b238-6dd8ae7c3811 Intel-P5800-NVMe 0 True Intel_P5800_4IASHPK4.HPb 120 1 True True True Firmware True 452340a5-304f-3030-3430-304b59444b56 HPK4 Intel-P5800-NVMe 0 True Intel_P5800_4IASHPK4.HPb 120 1 True True True Firmware True 452340a5-304f-3030-3830-304b59444c41 HPK4 FWPKG-v2 ComboFirmware Bmc Uefi new NVIDIAファームウェアパッケージ(FWPKG) for HPE InfiniBand NDR200/Ethernet 200GbE 2ポートQSFP112 PCIe5 x16 MCX755106AC-HEATアダプター。HPE部品番号P65333-B21およびP65333-H21 NVIDIA Firmware Package (FWPKG) for HPE InfiniBand NDR200/Ethernet 200GbE 2-port QSFP112 PCIe5 x16 MCX755106AC-HEAT Adapter : HPE part numbers P65333-B21 and P65333-H21 NVIDIAファームウェアパッケージ(FWPKG) for HPE InfiniBand NDR200/Ethernet 200GbE 2ポートQSFP112 PCIe5 x16 MCX755106AC-HEATアダプター。HPE部品番号P65333-B21およびP65333-H21 NVIDIA Firmware Package (FWPKG) for HPE InfiniBand NDR200/Ethernet 200GbE 2-port QSFP112 PCIe5 x16 MCX755106AC-HEAT Adapter : HPE part numbers P65333-B21 and P65333-H21 Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 ネットワーク Networking サーバ Server ファームウェア - ネットワーク Firmware - Network 英語（US） English (US) 以下のいずれかの方法を使用してPLDMファームウェアをフラッシュします

iLOrestツールを使用したフラッシュ
Smart Update Manager（SUM）を使用したフラッシュ
iLO GUIからのフラッシュ

1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。

ローカルホストOSの例：
ilorest flashfwpkg

リモートの例：
ilorest flashfwpkg --url -u -p

2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。

USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。

通常の手順でファームウェアおよびソフトウェアをアップデートします。

アップデートを直ちに有効にするにはシステムを再起動してください。

3. iLO GUIからのフラッシュ

任意のブラウザーを使用してiLO IPを参照し、資格情報を使用してログインします
PLDMでサポートされているアダプターがサーバーに存在していることを確認します
iLO GUIに移動します -> 左側から[Firmware and OS software]をクリックします -> [Update Firmware]をクリックします -> [Choose File]をクリックして、サポートされているPLDMファイルを参照します -> [Flash]ボタンをクリックします。
アップデートステータスが上部に表示され、インテグレーテッドマネジメントログ（IML）にログエントリが記録されます。
ファームウェアアップデートを有効にするためにサーバーを再起動します。

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> Validated and Supported NDR200 / 200GbE cables and transceivers:

HCA to Switch:

P65335-B21 HPE InfiniBand NDR200/Ethernet OSFP to 4xQSFP112 1m Direct Attach Copper Cable (HCA to Switch)
P65335-B23 HPE InfiniBand NDR200/Ethernet OSFP to 4xQSFP112 2m Direct Attach Copper Cable (HCA to Switch)
P65335-B25 HPE InfiniBand NDR200/Ethernet OSFP to 4xQSFP112 3m Direct Attach Copper Cable (HCA to Switch)
P65340-B21 HPE InfiniBand NDR200/Ethernet OSFP to 4xQSFP112 4m Active Copper Cable (HCA to Switch)
P65340-B22 HPE InfiniBand NDR200/Ethernet OSFP to 4xQSFP112 5m Active Copper Cable (HCA to Switch)
P49766-B21 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 3m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B22 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 5m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B23 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 10m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B24 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 15m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B25 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 20m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B26 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 30m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)

HCA side (QSFP112) transceiver:

P65334-B21 HPE InfiniBand NDR/Ethernet 400G QSFP112 MPO12 850nm Multi-mode 50m APC Transceiver

Validated and Supported HDR / 200GbE cables:

HDR / 200GbE cables:

HDR P06149-B21 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 0.5m Direct Attach Copper Cable
HDR P06149-B22 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 1m Direct Attach Copper Cable
HDR P06149-B23 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 1.5m Direct Attach Copper Cable
HDR P06149-B24 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 2m Direct Attach Copper Cable
HDR P06153-B21 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 3m Active Optical Cable
HDR P06153-B22 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 5m Active Optical Cable
HDR P06153-B23 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 10m Active Optical Cable
HDR P06153-B24 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 15m Active Optical Cable
HDR P06153-B25 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 20m Active Optical Cable
HDR P06153-B26 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 30m Active Optical Cable

2xHDR100 / 2x100GbE splitter cables:

HDR/HDR100 P06248-B21 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to 2xQSFP56 1m Splitter Direct Attach Copper Cable
HDR/HDR100 P06248-B22 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to 2xQSFP56 1.5m Splitter Direct Attach Copper Cable
HDR/HDR100 P06248-B23 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to 2xQSFP56 2m Splitter Direct Attach Copper Cable
HDR/HDR100 P26659-B21 HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 3m AO Splitter Cable
HDR/HDR100 P26659-B22 HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 5m AO Splitter Cable
HDR/HDR100 P26659-B23 HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 10m AO Splitter Cable
HDR/HDR100 P26659-B24 HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 15m AO Splitter Cable
HDR/HDR100 P26659-B25 HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 20m AO Splitter Cable
HDR/HDR100 P26659-B26 HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 30m AO Splitter Cable

Validated and Supported 10GbE Cables:

10GbE 455883-B21 HPE BladeSystem c-Class 10Gb SFP+ SR Transceiver
10GbE 455886-B21 HPE BladeSystem c-Class 10Gb SFP+ LR Transceiver
10GbE 537963-B21 HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 5m Direct Attach Copper Cable
1GbE/10GbE 487655-B21 HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 3m Direct Attach Copper Cable
1GbE/10GbE 655874-B21 HPE QSFP/SFP+ Adaptor Kit
10GbE 813874-B21 HPE 10GBase-T SFP+ Transceiver
10GbE 838327-B21 HPE Synergy Dual 10GBASE-T QSFP+ 30m RJ45 Transceiver

Validated and Supported 25GbE Cables:

25GbE 845970-B21 HPE QSFP 28 to SFP28 Adaptor
25GbE 845416-B21 HPE 100Gb QSFP28 to 4x25Gb SFP28 3m DAC
25GbE 845420-B21 HPE QSFP28 to 4x25G SFP28 7m AOC
25GbE 845424-B21 HPE QSFP28 to 4x25Gb SFP28 15m AOC
25GbE 844483-B21 HPE 25Gb SFP28 to SFP28 7m AOC
25GbE 845396-B21 HPE 25Gb SFP28 to SFP28 15m AOC
25GbE 845398-B21 HPE 25Gb SFP28 SR 100m Transceiver

Validated and Supported 40GbE Cables:

40GbE 720211-B21 HPE BladeSystem c-Class 40G QSFP+ to QSFP+ 15m Active Optical Cable
40GbE 721076-B21 HP BLc QSFP+ to 4x10G SFP+ AOC 15m Opt
40GbE 720187-B21 HPE BladeSystem c-Class 40Gb QSFP+ MPO SR4 100m Transceiver
40GbE 720193-B21 HPE BladeSystem c-Class QSFP+ to SFP+ Adapter
40GbE 817040-B21 HPE Synergy 40GbE/4x10GbE/4x8Gb FC QSFP+ Transceiver
40GbE 720199-B22 HPE BladeSystem c‑Class 40G QSFP+ to QSFP+ 3m Direct Attach Copper Cable
40GbE 720202-B23 HPE HP BLC 40G QSFP+ QSFP+ 5M DAC Cable
40GbE 721064-B21 HPE BladeSystem c‑Class 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable
40GbE 841716-B21 HPE 40Gb QSFP+ Bidirectional Transceiver
40GbE JH232A HPE X142 40G QSFP+ LC LR4 SM Transceiver

Validated and Supported 100GbE Cables:

100GBE 845408-B21 HPE 100Gb QSFP28 to QSFP28 5m DAC
100GBE 845416-B21 HPE 100Gb QSFP28 to 4x25Gb SFP28 3m DAC
100GbE 845406-B21 HPE 100Gb QSFP28 to QSFP28 3m DAC
100GBE 845972-B21 HPE 100Gb QSFP28 Bidirectional XCVR
100GBE 845410-B21 HPE 100Gb QSFP28 to QSFP28 7m AOC
100GbE 845412-B21 HPE 100Gb QSFP28 to QSFP28 10m AOC
100GBE 845414-B21 HPE 100Gb QSFP28 to QSFP28 15m AOC
100GBE Q8J73A HPE Mseries 100GbE QSFP28 PSM4 500m XCVR
100GBE Q2F19A HPE M-series 100GbE QSFP28 SR4 100m XCVR

Validated and Supported 200GbE Cables:

200GBE R5Z76A HPE 200Gb QSFP56 to QSFP56 0.5m Direct Attach Copper Cable
200GBE R5Z77A HPE 200Gb QSFP56 to QSFP56 1m Direct Attach Copper Cable
200GBE R5Z78A HPE 200Gb QSFP56 to QSFP56 2m Direct Attach Copper Cable
200GBE R5Z79A HPE 200Gb QSFP56 to QSFP56 2.5m Direct Attach Copper Cable
200GBE R5Z80A HPE 200Gb QSFP56 to QSFP56 5m Active Optical Cable
200GBE R5Z81A HPE 200Gb QSFP56 to QSFP56 10m Active Optical Cable
200GBE R5Z82A HPE 200Gb QSFP56 to QSFP56 15m Active Optical Cable
200GBE R5Z83A HPE 200Gb QSFP56 MPO SR4 100m Transceiver
200GBE R6F24A HPE 200Gb QSFP56 to 2x100Gb QSFP56 3m Active Optical Cable
200GBE R6F25A HPE 200Gb QSFP56 to 2x100Gb QSFP56 5m Active Optical Cable
200GBE R6F26A HPE 200Gb QSFP56 to 2x100Gb QSFP56 15m Active Optical Cable

Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.

]]> Validated and Supported NDR200 / 200GbE cables and transceivers:

HCA to Switch:

P65335-B21 HPE InfiniBand NDR200/Ethernet OSFP to 4xQSFP112 1m Direct Attach Copper Cable (HCA to Switch)
P65335-B23 HPE InfiniBand NDR200/Ethernet OSFP to 4xQSFP112 2m Direct Attach Copper Cable (HCA to Switch)
P65335-B25 HPE InfiniBand NDR200/Ethernet OSFP to 4xQSFP112 3m Direct Attach Copper Cable (HCA to Switch)
P65340-B21 HPE InfiniBand NDR200/Ethernet OSFP to 4xQSFP112 4m Active Copper Cable (HCA to Switch)
P65340-B22 HPE InfiniBand NDR200/Ethernet OSFP to 4xQSFP112 5m Active Copper Cable (HCA to Switch)
P49766-B21 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 3m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B22 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 5m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B23 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 10m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B24 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 15m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B25 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 20m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B26 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 30m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)

HCA side (QSFP112) transceiver:

P65334-B21 HPE InfiniBand NDR/Ethernet 400G QSFP112 MPO12 850nm Multi-mode 50m APC Transceiver

Validated and Supported HDR / 200GbE cables:

HDR / 200GbE cables:

HDR P06149-B21 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 0.5m Direct Attach Copper Cable
HDR P06149-B22 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 1m Direct Attach Copper Cable
HDR P06149-B23 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 1.5m Direct Attach Copper Cable
HDR P06149-B24 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 2m Direct Attach Copper Cable
HDR P06153-B21 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 3m Active Optical Cable
HDR P06153-B22 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 5m Active Optical Cable
HDR P06153-B23 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 10m Active Optical Cable
HDR P06153-B24 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 15m Active Optical Cable
HDR P06153-B25 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 20m Active Optical Cable
HDR P06153-B26 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 30m Active Optical Cable

2xHDR100 / 2x100GbE splitter cables:

HDR/HDR100 P06248-B21 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to 2xQSFP56 1m Splitter Direct Attach Copper Cable
HDR/HDR100 P06248-B22 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to 2xQSFP56 1.5m Splitter Direct Attach Copper Cable
HDR/HDR100 P06248-B23 HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to 2xQSFP56 2m Splitter Direct Attach Copper Cable
HDR/HDR100 P26659-B21 HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 3m AO Splitter Cable
HDR/HDR100 P26659-B22 HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 5m AO Splitter Cable
HDR/HDR100 P26659-B23 HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 10m AO Splitter Cable
HDR/HDR100 P26659-B24 HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 15m AO Splitter Cable
HDR/HDR100 P26659-B25 HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 20m AO Splitter Cable
HDR/HDR100 P26659-B26 HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 30m AO Splitter Cable

Validated and Supported 10GbE Cables:

10GbE 455883-B21 HPE BladeSystem c-Class 10Gb SFP+ SR Transceiver
10GbE 455886-B21 HPE BladeSystem c-Class 10Gb SFP+ LR Transceiver
10GbE 537963-B21 HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 5m Direct Attach Copper Cable
1GbE/10GbE 487655-B21 HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 3m Direct Attach Copper Cable
1GbE/10GbE 655874-B21 HPE QSFP/SFP+ Adaptor Kit
10GbE 813874-B21 HPE 10GBase-T SFP+ Transceiver
10GbE 838327-B21 HPE Synergy Dual 10GBASE-T QSFP+ 30m RJ45 Transceiver

Validated and Supported 25GbE Cables:

25GbE 845970-B21 HPE QSFP 28 to SFP28 Adaptor
25GbE 845416-B21 HPE 100Gb QSFP28 to 4x25Gb SFP28 3m DAC
25GbE 845420-B21 HPE QSFP28 to 4x25G SFP28 7m AOC
25GbE 845424-B21 HPE QSFP28 to 4x25Gb SFP28 15m AOC
25GbE 844483-B21 HPE 25Gb SFP28 to SFP28 7m AOC
25GbE 845396-B21 HPE 25Gb SFP28 to SFP28 15m AOC
25GbE 845398-B21 HPE 25Gb SFP28 SR 100m Transceiver

Validated and Supported 40GbE Cables:

40GbE 720211-B21 HPE BladeSystem c-Class 40G QSFP+ to QSFP+ 15m Active Optical Cable
40GbE 721076-B21 HP BLc QSFP+ to 4x10G SFP+ AOC 15m Opt
40GbE 720187-B21 HPE BladeSystem c-Class 40Gb QSFP+ MPO SR4 100m Transceiver
40GbE 720193-B21 HPE BladeSystem c-Class QSFP+ to SFP+ Adapter
40GbE 817040-B21 HPE Synergy 40GbE/4x10GbE/4x8Gb FC QSFP+ Transceiver
40GbE 720199-B22 HPE BladeSystem c‑Class 40G QSFP+ to QSFP+ 3m Direct Attach Copper Cable
40GbE 720202-B23 HPE HP BLC 40G QSFP+ QSFP+ 5M DAC Cable
40GbE 721064-B21 HPE BladeSystem c‑Class 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable
40GbE 841716-B21 HPE 40Gb QSFP+ Bidirectional Transceiver
40GbE JH232A HPE X142 40G QSFP+ LC LR4 SM Transceiver

Validated and Supported 100GbE Cables:

100GBE 845408-B21 HPE 100Gb QSFP28 to QSFP28 5m DAC
100GBE 845416-B21 HPE 100Gb QSFP28 to 4x25Gb SFP28 3m DAC
100GbE 845406-B21 HPE 100Gb QSFP28 to QSFP28 3m DAC
100GBE 845972-B21 HPE 100Gb QSFP28 Bidirectional XCVR
100GBE 845410-B21 HPE 100Gb QSFP28 to QSFP28 7m AOC
100GbE 845412-B21 HPE 100Gb QSFP28 to QSFP28 10m AOC
100GBE 845414-B21 HPE 100Gb QSFP28 to QSFP28 15m AOC
100GBE Q8J73A HPE Mseries 100GbE QSFP28 PSM4 500m XCVR
100GBE Q2F19A HPE M-series 100GbE QSFP28 SR4 100m XCVR

Validated and Supported 200GbE Cables:

200GBE R5Z76A HPE 200Gb QSFP56 to QSFP56 0.5m Direct Attach Copper Cable
200GBE R5Z77A HPE 200Gb QSFP56 to QSFP56 1m Direct Attach Copper Cable
200GBE R5Z78A HPE 200Gb QSFP56 to QSFP56 2m Direct Attach Copper Cable
200GBE R5Z79A HPE 200Gb QSFP56 to QSFP56 2.5m Direct Attach Copper Cable
200GBE R5Z80A HPE 200Gb QSFP56 to QSFP56 5m Active Optical Cable
200GBE R5Z81A HPE 200Gb QSFP56 to QSFP56 10m Active Optical Cable
200GBE R5Z82A HPE 200Gb QSFP56 to QSFP56 15m Active Optical Cable
200GBE R5Z83A HPE 200Gb QSFP56 MPO SR4 100m Transceiver
200GBE R6F24A HPE 200Gb QSFP56 to 2x100Gb QSFP56 3m Active Optical Cable
200GBE R6F25A HPE 200Gb QSFP56 to 2x100Gb QSFP56 5m Active Optical Cable
200GBE R6F26A HPE 200Gb QSFP56 to 2x100Gb QSFP56 15m Active Optical Cable

Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.

]]> ven_15B3&dev_1021&subsys_005315B3 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic 28_41_1000-MCX755106AC-HEAT_HPE_Ax.pldm.fwpkg 28_41_1000-MCX755106AC-HEAT_HPE_Ax.pldm.fwpkg file://./packages/28_41_1000-MCX755106AC-HEAT_HPE_Ax.pldm.fwpkg 28_41_1000-MCX755106AC-HEAT_HPE_Ax.pldm.signed 28_41_1000-MCX755106AC-HEAT_HPE_Ax.pldm.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb HPE IB NDR200/EN 200G 2p QSFP112 Adptr 0 True 28_41_1000-MCX755106AC-HEAT_HPE_Ax.pldm.signed 360 1 True True True Firmware True a6b1a447-382a-5a4f-15b3-102115b30053 28.41.1000 FWPKG-v2 Firmware Bmc new Broadcomファームウェアパッケージfor BCM5750xアダプター Broadcom Firmware Package for BCM5750x adapters Broadcomファームウェアパッケージfor BCM5750xアダプター Broadcom Firmware Package for BCM5750x adapters Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 サーバオプション ServerOptions ネットワーク Networking サーバ Server ファームウェア - ネットワーク Firmware - Network 英語（US） English (US) Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

Additional Information:

When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

Additional Information:

When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.

]]>

This software package contains NVM Image version 230.1.123.0 with the following firmware versions:

NIC	Bootcode Version	NCSI Version	MBA Version	UEFI Version	RoCE Version
Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE	230.0.169.0	230.0.168.0	230.0.167.0	230.0.167.0	230.0.168.0
Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE

Recommend to upgrade to the NVM Image version 226.1.107.0 firmware first for this firmware package, please refer to the following link.

https://www.hpe.com/global/swpublishing/MTX-99a59d3b36404166b10a37a3b3

]]>

This software package contains NVM Image version 230.1.123.0 with the following firmware versions:

NIC	Bootcode Version	NCSI Version	MBA Version	UEFI Version	RoCE Version
Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE	230.0.169.0	230.0.168.0	230.0.167.0	230.0.167.0	230.0.168.0
Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE

Recommend to upgrade to the NVM Image version 226.1.107.0 firmware first for this firmware package, please refer to the following link.

https://www.hpe.com/global/swpublishing/MTX-99a59d3b36404166b10a37a3b3

]]> 14e4 1801 14e4 1599 14e4 1801 14e4 1598 14e4 1804 14e4 1599 14e4 1804 14e4 1598 14E4 1751 14E4 1599 14E4 1751 14E4 1598 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic bcm230.1.123.0_Thor.pup.fwpkg bcm230.1.123.0_Thor.pup.fwpkg file://./packages/bcm230.1.123.0_Thor.pup.fwpkg bcm230.1.123.0_Thor.pup.HPb bcm230.1.123.0_Thor.pup.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Broadcom NetXtreme-E BCM5750x adapters 0 True bcm230.1.123.0_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-175114e41598 230.1.123.0 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm230.1.123.0_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180114e41598 230.1.123.0 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm230.1.123.0_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180414e41598 230.1.123.0 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm230.1.123.0_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-175114e41599 230.1.123.0 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm230.1.123.0_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180114e41599 230.1.123.0 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm230.1.123.0_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180414e41599 230.1.123.0 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm230.1.123.0_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-175014e4159a 230.1.123.0 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm230.1.123.0_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180214e4159a 230.1.123.0 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm230.1.123.0_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180514e4159a 230.1.123.0 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm230.1.123.0_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-175014e4159b 230.1.123.0 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm230.1.123.0_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180214e4159b 230.1.123.0 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm230.1.123.0_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180514e4159b 230.1.123.0 226.1.107.0 FWPKG-v2 ComboFirmware Bmc new Universal Firmware Package for Drives - MO001600KZYWU, MO003200KZYXB, MO006400KZYXC, VO001920KZYWT, VO003840KZYWV and VO007680KZYXA Universal Firmware Package for Drives - MO001600KZYWU, MO003200KZYXB, MO006400KZYXC, VO001920KZYWT, VO003840KZYWV and VO007680KZYXA Universal Firmware Package for Drives - MO001600KZYWU, MO003200KZYXB, MO006400KZYXC, VO001920KZYWT, VO003840KZYWV and VO007680KZYXA Universal Firmware Package for Drives - MO001600KZYWU, MO003200KZYXB, MO006400KZYXC, VO001920KZYWT, VO003840KZYWV and VO007680KZYXA Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server ストレージ Storage Firmware - PCIe NVMe Storage Disk Firmware - PCIe NVMe Storage Disk 英語（US） English (US) Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> MO001600KZYWU MO003200KZYXB MO006400KZYXC VO001920KZYWT VO003840KZYWV VO007680KZYXA アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme Solidigm_P5x20_4IAAHPK5.fwpkg Solidigm_P5x20_4IAAHPK5.fwpkg file://./packages/Solidigm_P5x20_4IAAHPK5.fwpkg payload.json Solidigm_P5x20_4IAAHPK5.HPb Solidigm_P5x20_4IAAHPK5.xml f6de0320-2e0f-489a-b238-6dd8ae7c3811 Solidigm-P5x20-NVMe 0 True Solidigm_P5x20_4IAAHPK5.HPb 120 1 True True True Firmware True 4d2340a5-304f-3130-3630-304b5a595755 HPK5 Solidigm-P5x20-NVMe 0 True Solidigm_P5x20_4IAAHPK5.HPb 120 1 True True True Firmware True 4d2340a5-304f-3330-3230-304b5a595842 HPK5 Solidigm-P5x20-NVMe 0 True Solidigm_P5x20_4IAAHPK5.HPb 120 1 True True True Firmware True 4d2340a5-304f-3630-3430-304b5a595843 HPK5 Solidigm-P5x20-NVMe 0 True Solidigm_P5x20_4IAAHPK5.HPb 120 1 True True True Firmware True 562340a5-304f-3130-3932-304b5a595754 HPK5 Solidigm-P5x20-NVMe 0 True Solidigm_P5x20_4IAAHPK5.HPb 120 1 True True True Firmware True 562340a5-304f-3330-3834-304b5a595756 HPK5 Solidigm-P5x20-NVMe 0 True Solidigm_P5x20_4IAAHPK5.HPb 120 1 True True True Firmware True 562340a5-304f-3730-3638-304b5a595841 HPK5 FWPKG-v2 ComboFirmware Bmc Uefi new HPE Intel iavf ドライバー for Red Hat Enterprise Linux 9 HPE Intel iavf Drivers for Red Hat Enterprise Linux 9 HPE Intel iavf ドライバー for Red Hat Enterprise Linux 9 HPE Intel iavf Drivers for Red Hat Enterprise Linux 9 Red Hat Enterprise Linux 9 Server サーバオプション ServerOptions ネットワーク Networking サーバ Server ドライバ - ネットワーク Driver - Network 英語（US） English (US) この製品が提供するバイナリRPMパッケージは、Linuxディストリビューションに同梱されているデフォルトのインボックスカーネル（標準カーネル）用に特別に構築された、コンパイル済みのカーネルモジュールドライバーです。 HPEは、これらのコンパイル済みのカーネルモジュールRPMを指定のカーネルで使用するためにテストし、承認しました。

これらのコンパイル済みのRPMパッケージは、別のカーネル（errataカーネルなど）上では期待通りにインストールまたは機能しない場合があります。デフォルトのインボックスカーネルを使用していない場合は、ドライバーのソースパッケージ（例：<ドライバー>.src.rpm）をダウンロードし、ドライバーソースからターゲットシステム用の新しいドライバーをコンパイルしてください。

ドライバーソースRPMの場所を見つけるには、カーネルモジュールドライバーRPMに対して次のコマンドを実行します。localhost> rpm -qpi <カーネルモジュールドライバー名>.rpm

]]> The binary RPM package(s) provided by this product are pre-compiled kernel module drivers built specifically for the default inbox kernel (stock kernel) that ships with the Linux distribution. HPE has tested and approved these pre-compiled kernel module RPMs for use with the specified kernel.

These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.

To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm

]]>

このコンポーネントは、同じOSメジャーバージョンでの一貫性を保つために、RPM形式を古いバージョンにフォールバックします。

* 以前のWebリリースkmod-iavf-4.9.1-1.rhel9u2.x86_64.rpmは公開されていません
- RPMパッケージ名は（hp-iavf）から（iavf）に変更されました。この変更を（iavf）から（hp-iavf）に戻しました。
- 新しいRPMリリースは、次の新しいOSメジャーリリースまで延期されます
* kmod-hp-iavfとkmod-iavfはOSの異なるRPMパッケージです。それらは同時にまとめてインストールすることができます。
混乱を避けるため、すでにkmod-iavf-4.9.1-1.rhel9u2.x86_64.rpmをダウンロードしてインストールしている場合は、#rpm -e kmod-iavfによって以前のRPMをアンインストールしてから、アップデートされたRPMをインストールしてください。

]]>

This component fallback the RPM format to old version for consistency in the same OS major version.

* The previous web release kmod-iavf-4.9.1-1.rhel9u2.x86_64.rpm is unpublished
- The RPM package name was changed from (hp-iavf) to (iavf). Now we revert this change from (iavf) to (hp-iavf).
- The new RPM release is deferred to next new OS major release
* kmod-hp-iavf and kmod-iavf are different RPM package for OS. They can be together installed in the same time.
To avoid confusion, if you already download and install kmod-iavf-4.9.1-1.rhel9u2.x86_64.rpm, please uninstall the previous RPM by #rpm -e kmod-iavf and then install the updated RPM.

]]> 8086 1593 8086 000E 8086 1592 8086 0002 8086 1592 8086 0006 8086 159B 8086 0003 8086 159B 8086 0005 8086 1593 8086 0005 8086 1592 8086 000E 8086 1593 8086 000C 8086 1572 8086 00A1 8086 37D2 1590 0218 8086 37D3 1590 0219 8086 15FF 8086 000C 8086 1572 8086 0008 8086 37D1 1590 0216 8086 37D1 1590 0217 8086 1572 103C 22FC 8086 1572 103C 22FD 8086 1581 1590 00F8 8086 37CE 1590 0215 8086 37D1 1590 0247 8086 37cd 8086 154c 8086 0000 8086 1571 8086 0001 8086 0dd5 8086 1889 8086 0001 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要ありません。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm software:rpm kmod-hp-iavf-4.11.2-1.rhel9u4.x86_64.rpm kmod-hp-iavf-4.11.2-1.rhel9u3.x86_64.rpm file://./packages/kmod-hp-iavf-4.11.2-1.rhel9u3.x86_64.rpm ./etc/depmod.d/hp-iavf.conf ./etc/dracut.conf.d/hp-iavf-oob.conf ./lib/modules/5.14.0-362.8.1.el9_3.x86_64 ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra/hp-iavf ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra/hp-iavf/iavf.ko ./usr/lib/.build-id ./usr/lib/.build-id/94 ./usr/lib/.build-id/94/03da7bd3e3923886f92355a6cf2c3c20dab5bb ./usr/share/smartupdate/kmod-hp-iavf/component.xml kmod-hp-iavf-4.11.2-1.rhel9u4.x86_64.rpm file://./packages/kmod-hp-iavf-4.11.2-1.rhel9u4.x86_64.rpm ./etc/depmod.d/hp-iavf.conf ./etc/dracut.conf.d/hp-iavf-oob.conf ./lib/modules/5.14.0-427.13.1.el9_4.x86_64 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/hp-iavf ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/hp-iavf/iavf.ko ./usr/lib/.build-id ./usr/lib/.build-id/08 ./usr/lib/.build-id/08/cc265cc4de3b89d158529bbcb02ca50c597609 ./usr/share/smartupdate/kmod-hp-iavf/component.xml new HPE Mellanox RoCE (RDMA over Converged Ethernet) ConnectX-4, ConnectX-5, ConnectX-6 and ConnectX-7 Driver for Red Hat Enterprise Linux 9 Update 4 (x86_64) HPE Mellanox RoCE (RDMA over Converged Ethernet) ConnectX-4, ConnectX-5, ConnectX-6 and ConnectX-7 Driver for Red Hat Enterprise Linux 9 Update 4 (x86_64) HPE Mellanox RoCE ConnectX-4, ConnectX-5, ConnectX-6 and ConnectX-7 Driver for Red Hat Enterprise Linux 9 Update 4 (x86_64) HPE Mellanox RoCE ConnectX-4, ConnectX-5, ConnectX-6 and ConnectX-7 Driver for Red Hat Enterprise Linux 9 Update 4 (x86_64) Hewlett-Packard Development Company, L.P. Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 9 Server サーバオプション ServerOptions ネットワーク Networking サーバ Server ドライバ - ネットワーク Driver - Network 英語（US） English (US) rootとしてログインし、rpmをご使用のハードディスク上のディレクトリにダウンロードし、そのディレクトリに移動します。

注記：RoCEのユーザースペース機能を有効にするために、使用されているカーネルバージョンやタイプにかかわらず、"mlnx-ofa_kernel-24.04" RPMをインストールする必要があります。RoCEのユーザースペースライブラリであるRPM（mlnx-ofa_kernel）はOSディストリビューションに含まれるOpenMPI RPMと競合することがあります。これは既知の挙動です。"mlnx-ofa_kernel"のインストールの前に、LinuxディストリビューションからOpenMPI RPMがターゲットノードにインストールされないことを確認してください。もしすでにインストールされている場合、 HPE Mellanox RoCEのドライバーパッケージをインストールする前にすべてのOpenMPIディストリビューションのRPMをアンインストールしてください。

ドライバーをインストールまたはアップグレードするには次のようにします。
カーネルバージョン5.14.0-427.13.1.el9_4.x86_64または将来のerrataを使用している場合：

# rpm -Uvh mlnx-ofa_kernel-24.04-OFED.24.04.0.6.6.1.rhel9u4.x86_64.rpm kmod-mlnx-ofa_kernel-24.04-OFED.24.04.0.6.6.1.rhel9u4.x86_64.rpm

Setup is now complete. ドライバーを有効にするにはコンピューターを再起動します。

]]> Login as root, download the RPM to a directory on your hard drive and change to that directory.

Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-24.04" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.

To install or upgrade the driver:
If using kernel version 5.14.0-427.13.1.el9_4.x86_64 or any future errata:

# rpm -Uvh mlnx-ofa_kernel-24.04-OFED.24.04.0.6.6.1.rhel9u4.x86_64.rpm kmod-mlnx-ofa_kernel-24.04-OFED.24.04.0.6.6.1.rhel9u4.x86_64.rpm

Setup is now complete. Reboot your computer for the driver to take effect.

]]> このドライバーパッケージは、以下のアダプターをサポートします：

ConnectX4:
- HPE InfiniBand EDR/イーサーネット100Gb 2ポート840QSFP28アダプター（825111-B21 / 825111-H21）
- HPE InfiniBand EDR/イーサーネット100Gb 1ポート840QSFP28アダプター（825110-B21 / 825110-H21）
ConnectX4 Lx:
- HPE Ethernet 25Gb 2ポート 640SFP28アダプター (817753-B21)
- HPE Ethernet 25Gb 2ポート 640FLR-SFP28アダプター（817749-B21）
- HPE Ethernet 10Gb 2ポート548SFP+アダプター（P11338-B21）
- HPE Ethernet 10Gb 2ポート SFP+ MCX4121A-XCHTアダプター（P21930-B21）
- HPE 10/25GbE 2p SFP28 MCX4621 OCP3アダプター（P11341-B21）
ConnectX5:
- HPE Ethernet 100Gb 2ポート QSFP28 MCX516A-CCHTアダプター（P21927-B21）
- HPE Ethernet 100Gb 1ポートQSFP28 PCIe3 x16 MCX515A-CCATアダプター（P31246-B21 / P31246-H21）
- HPE Ethernet 100Gb 1ポート842QSFP28アダプター（874253-B21）
- Mellanox MCX562A-ACAI Ethernet 10/25Gb 2ポートSFP28 OCP3アダプターfor HPE（P10112-B21）
- Mellanox MCX512F-ACHT Ethernet 10/25Gb 2ポートSFP28アダプターfor HPE (P13188-B21)
- HPE Infiniband FDR/Ethernet 40/50Gb 2ポート547FLR-QSFPアダプター（879482-B21）
- HPE InfiniBand EDR/イーサーネット100Gb 2ポート841QSFP28アダプター（872726-B21 / 872726-H21）
ConnectX6:
- HPE InfiniBand HDR/Ethernet 200Gb 1ポート940QSFP56 x16アダプター（P06154-B21 / P06154-H21）
- HPE InfiniBand HDR100/Ethernet 100Gb 1ポート940QSFP56 x16アダプター（P06250-B21 / P06250-H21）
- HPE InfiniBand HDR100/Ethernet 100Gb 2ポート940QSFP56 x16アダプター（P06251-B21 / P06251-H21）
- HPE InfiniBand HDR100/Ethernet 100Gb 1ポートQSFP56 PCIe4 x16 MCX653105A-ECATアダプター（P23665-B21 / P23665-H21）
- HPE InfiniBand HDR/Ethernet 200Gb 1ポートQSFP56 PCIe4 x16 MCX653105A-HDATアダプター（P23664-B21 / P23664-H21）
- HPE InfiniBand HDR100/Ethernet 100Gb 2ポートQSFP56 PCIe4 x16 MCX653106A-ECATアダプター（P23666-B21 / P23666-H21）
- HPE InfiniBand HDR/Ethernet 200Gb 2ポートQSFP56 PCIe4 x16 OCP3 MCX653436A-HDAIアダプター（P31348-B21 / P31348-H21）
- HPE InfiniBand HDR/Ethernet 200Gb 1ポートQSFP56 PCIe4 x16 OCP3 MCX653435A-HDAIアダプター（P31323-B21 / P31323-H21）
- HPE InfiniBand HDR/Ethernet 200Gb 2ポートQSFP56 PCIe4 x16 MCX653106A-HDATアダプター（P31324-B21 / P31324-H21）
ConnectX6 Dx:
- Mellanox MCX623105AS-VDAT Ethernet 200Gb 1ポートQSFP56アダプターfor HPE（P10180-B21）
- Mellanox MCX623106AS-CDAT Ethernet 100Gb 2ポートQSFP56アダプターfor HPE (P25960-B21)
ConnectX6 Lx:
- Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2ポートSFP28アダプターfor HPE (P42044-B21)
- Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2ポートSFP28 OCP3アダプターfor HPE (P42041-B21)

ConnectX7:
- HPE InfiniBand NDR200/Ethernet 200GbE 2ポートQSFP112 PCIe5 x16 MCX755106AC-HEATアダプター（P65333-B21）

]]> This driver package supports the following adapters:

ConnectX4:
- HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21 / 825111-H21)
- HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21 / 825110-H21)
ConnectX4 Lx:
- HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21)
- HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21)
- HPE Ethernet 10Gb 2-port 548SFP+ Adapter (P11338-B21)
- HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCHT Adapter (P21930-B21)
- HPE 10/25GbE 2p SFP28 MCX4621 OCP3 Adapter (P11341-B21)
ConnectX5:
- HPE Ethernet 100Gb 2-port QSFP28 MCX516A-CCHT Adapter (P21927-B21)
- HPE Ethernet 100Gb 1-port QSFP28 PCIe3 x16 MCX515A-CCAT Adapter (P31246-B21 / P31246-H21)
- HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21)
- Mellanox MCX562A-ACAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P10112-B21)
- Mellanox MCX512F-ACHT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P13188-B21)
- HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21)
- HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21 / 872726-H21)
ConnectX6:
- HPE InfiniBand HDR/Ethernet 200Gb 1-port 940QSFP56 x16 Adapter (P06154-B21 / P06154-H21)
- HPE InfiniBand HDR100/Ethernet 100Gb 1-port 940QSFP56 x16 Adapter (P06250-B21/ P06250-H21)
- HPE InfiniBand HDR100/Ethernet 100Gb 2-port 940QSFP56 x16 Adapter (P06251-B21 / P06251-H21)
- HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe4 x16 MCX653105A-ECAT Adapter (P23665-B21 / P23665-H21)
- HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe4 x16 MCX653105A-HDAT Adapter (P23664-B21 / P23664-H21)
- HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe4 x16 MCX653106A-ECAT Adapter (P23666-B21 / P23666-H21)
- HPE InfiniBand HDR/Ethernet 200Gb 2-port QSFP56 PCIe4 x16 OCP3 MCX653436A-HDAI Adapter (P31348-B21 / P31348-H21)
- HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe4 x16 OCP3 MCX653435A-HDAI Adapter (P31323-B21 / P31323-H21)
- HPE InfiniBand HDR/Ethernet 200Gb 2-port QSFP56 PCIe4 x16 MCX653106A-HDAT Adapter (P31324-B21 / P31324-H21)
ConnectX6 Dx:
- Mellanox MCX623105AS-VDAT Ethernet 200Gb 1-port QSFP56 Adapter for HPE (P10180-B21)
- Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21)
ConnectX6 Lx:
- Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21)
- Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P42041-B21)

ConnectX7:
- HPE InfiniBand NDR200/Ethernet 200GbE 2-port QSFP112 PCIe5 x16 MCX755106AC-HEAT Adapter (P65333-B21)

]]> 15b3 101f 15b3 0012 15b3 101f 15b3 0007 15B3 1017 1590 02C8 15B3 1017 1590 032D 15B3 1015 1590 02C9 15B3 1017 15B3 0116 15B3 1017 15B3 0052 15b3 1017 1590 0246 15B3 1017 1590 0346 15B3 1017 15B3 0117 15B3 101D 15B3 0042 15B3 1015 1590 02C1 15B3 1015 1590 02C7 15B3 1015 15B3 0102 15B3 1015 15B3 0047 15B3 1015 1590 00D3 15B3 1015 1590 00D4 15b3 1013 1590 00C7 15b3 1013 1590 00C8 15b3 1017 1590 0256 15b3 1017 1590 0282 15b3 101B 1590 02AB 15B3 101B 15B3 0068 15B3 101B 1590 0347 15B3 101B 1590 0345 15B3 101B 1590 0348 15b3 101B 1590 02AE 15B3 101B 15B3 0069 15b3 101B 1590 02AF 15B3 101B 15B3 0074 15B3 101D 15B3 0040 ven_15B3&dev_1021&subsys_005315B3 15B3 1021 15B3 0086 15B3 1021 15B3 0085 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm software:rpm mlnx-ofa_kernel-24.04-OFED.24.04.0.6.6.1.rhel9u4.x86_64.rpm kmod-mlnx-ofa_kernel-24.04-OFED.24.04.0.6.6.1.rhel9u4.x86_64.rpm file://./packages/kmod-mlnx-ofa_kernel-24.04-OFED.24.04.0.6.6.1.rhel9u4.x86_64.rpm ./etc/depmod.d/zz01-mlnx-ofa_kernel-bnxt_re.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-cifs.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-efa.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-hfi1.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_cm.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_core.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_ipoib.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_iser.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_isert.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_srp.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_srpt.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_ucm.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_umad.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_uverbs.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-irdma.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-iw_cm.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-iw_cxgb4.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mana_ib.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlx4_ib.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlx5-vfio-pci.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlx5_core.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlx5_dpll.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlx5_ib.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlx5_vdpa.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlx_compat.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlxdevm.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlxfw.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlxsw_spectrum.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-nvme-rdma.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-nvmet-rdma.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-opa_vnic.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-qedr.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-rdma_cm.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-rdma_rxe.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-rdma_ucm.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-rdmavt.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-rpcrdma.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-siw.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-svcrdma.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-usnic_verbs.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-vmw_pvrdma.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-xprtrdma.conf ./lib/modules/5.14.0-427.13.1.el9_4.x86_64 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/compat ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/compat/mlx_compat.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/ib_cm.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/ib_core.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/ib_ucm.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/ib_umad.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/ib_uverbs.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/iw_cm.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/rdma_cm.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/rdma_ucm.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/bnxt_re ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/bnxt_re/bnxt_re.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/cxgb4 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/cxgb4/iw_cxgb4.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/efa ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/efa/efa.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/hfi1 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/hfi1/hfi1.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/irdma ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/irdma/irdma.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/mana ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/mana/mana_ib.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/mlx4 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/mlx4/mlx4_ib.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/mlx5 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/mlx5/mlx5_ib.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/qedr ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/qedr/qedr.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/usnic ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/usnic/usnic_verbs.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/vmw_pvrdma ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/vmw_pvrdma/vmw_pvrdma.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/sw ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/sw/rdmavt ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/sw/rdmavt/rdmavt.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/sw/rxe ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/sw/rxe/rdma_rxe.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/sw/siw ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/sw/siw/siw.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/ipoib ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/ipoib/ib_ipoib.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/iser ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/iser/ib_iser.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/isert ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/isert/ib_isert.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/opa_vnic ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/opa_vnic/opa_vnic.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/srp ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/srp/ib_srp.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/srpt ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/srpt/ib_srpt.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlx5 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlx5/core ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlx5/core/mlx5_dpll.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlxfw ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlxfw/mlxfw.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlxsw ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlxsw/mlxsw_spectrum.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/nvme ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/nvme/host ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/nvme/host/nvme-rdma.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/nvme/target ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/nvme/target/nvmet-rdma.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/vdpa ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/vdpa/mlx5 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/vdpa/mlx5/mlx5_vdpa.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/vfio ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/vfio/pci ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/vfio/pci/mlx5 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/vfio/pci/mlx5/mlx5-vfio-pci.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/fs ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/fs/cifs ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/fs/cifs/cifs.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net/mlxdevm ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net/mlxdevm/mlxdevm.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net/sunrpc ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net/sunrpc/xprtrdma ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net/sunrpc/xprtrdma/rpcrdma.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net/sunrpc/xprtrdma/svcrdma.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net/sunrpc/xprtrdma/xprtrdma.ko ./usr/share/smartupdate/kmod-mlnx-ofa_kernel/component.xml mlnx-ofa_kernel-24.04-OFED.24.04.0.6.6.1.rhel9u4.x86_64.rpm file://./packages/mlnx-ofa_kernel-24.04-OFED.24.04.0.6.6.1.rhel9u4.x86_64.rpm ./bin/mlnx_conf_mgr.sh ./bin/mlnx_interface_mgr.sh ./etc/infiniband ./etc/infiniband/info ./etc/infiniband/mlx5.conf ./etc/infiniband/openib.conf ./etc/init.d/openibd ./etc/libibverbs.d ./etc/libibverbs.d/mlx5.driver ./etc/modprobe.d/ib_ipoib.conf ./etc/modprobe.d/mlnx-bf.conf ./etc/modprobe.d/mlnx.conf ./etc/rdma ./etc/rdma/mlx4.conf ./etc/rdma/modules ./etc/rdma/modules/rdma.conf ./etc/systemd/system/mlnx_interface_mgr@.service ./lib/udev/auxdev-sf-netdev-rename ./lib/udev/mlnx_bf_udev ./lib/udev/rules.d/83-mlnx-sf-name.rules ./lib/udev/rules.d/90-ib.rules ./lib/udev/sf-rep-netdev-rename ./sbin/mlnx-sf ./sbin/mlnx_bf_configure ./sbin/mlnx_bf_configure_ct ./sbin/sysctl_perf_tuning ./usr/bin/hca_self_test.ofed ./usr/bin/ib_atomic_bw ./usr/bin/ib_atomic_lat ./usr/bin/ib_read_bw ./usr/bin/ib_read_lat ./usr/bin/ib_send_bw ./usr/bin/ib_send_lat ./usr/bin/ib_write_bw ./usr/bin/ib_write_lat ./usr/bin/mlnx_dump_parser ./usr/bin/mlnx_perf ./usr/bin/mlnx_qos ./usr/bin/mlx_fs_dump ./usr/bin/ofed_info ./usr/bin/ofed_rpm_info ./usr/bin/raw_ethernet_burst_lat ./usr/bin/raw_ethernet_bw ./usr/bin/raw_ethernet_fs_rate ./usr/bin/raw_ethernet_lat ./usr/bin/run_perftest_loopback ./usr/bin/run_perftest_multi_devices ./usr/bin/tc_wrap.py ./usr/lib/.build-id ./usr/lib/.build-id/1b ./usr/lib/.build-id/1b/3f7f3c8910344c4d16f68ee8b9ee9c2038fd23 ./usr/lib/.build-id/20 ./usr/lib/.build-id/20/bdc6199b8f392e2b6fd70b9fc12e890f00ff70 ./usr/lib/.build-id/29 ./usr/lib/.build-id/29/f930152725759a7b489443d804e74f693d0e57 ./usr/lib/.build-id/2b ./usr/lib/.build-id/2b/a4e679c9c08579ca0b2f7234f3c713a86e8858 ./usr/lib/.build-id/54 ./usr/lib/.build-id/54/abf9b23c4591709c45819f5ee3139f4ec2e4ea ./usr/lib/.build-id/55 ./usr/lib/.build-id/55/a419b13957dfa1c9ab0a86079e46228c21b23b ./usr/lib/.build-id/5b ./usr/lib/.build-id/5b/9a041750c127620585c273f809d53ffae8cfa7 ./usr/lib/.build-id/88 ./usr/lib/.build-id/88/efe974cf899c4db4c17436c5b718a42fc2f67a ./usr/lib/.build-id/8c ./usr/lib/.build-id/8c/e0cb849135fa0ffb4a6e76354901768b17334d ./usr/lib/.build-id/95 ./usr/lib/.build-id/95/d13897c5a0eabc0d25f368f02a6b79f0b33af8 ./usr/lib/.build-id/9c ./usr/lib/.build-id/9c/ba8474dc7048536756eddb2419cbd9e852c60c ./usr/lib/.build-id/a0 ./usr/lib/.build-id/a0/93f0cfeefaa178c8fafcd461d61059938fdd50 ./usr/lib/.build-id/b0 ./usr/lib/.build-id/b0/1ac7acec8394cdb0a08a49643dba8d23e8d306 ./usr/lib/.build-id/b7 ./usr/lib/.build-id/b7/7467cb28ffb1fbe25b7bfffba1b2d40742c05e ./usr/lib/.build-id/bc ./usr/lib/.build-id/bc/043d0c754caab691165c304e29d4e632757692 ./usr/lib/.build-id/c1 ./usr/lib/.build-id/c1/04ec02d424fb56a8365e2187048eb09d1e7796 ./usr/lib/.build-id/ca ./usr/lib/.build-id/ca/5a1244aa0d2b7f9e1bba3977cd5865386dbc2e ./usr/lib/.build-id/cb ./usr/lib/.build-id/cb/3476c1f3d2cf79d857eccdbde7f3a54f60bfd7 ./usr/lib/.build-id/d3 ./usr/lib/.build-id/d3/690ca5454cf600298ee00b5459972a434decf3 ./usr/lib/.build-id/e0 ./usr/lib/.build-id/e0/2022107210297ae3f09fc53937aa528e9b2b02 ./usr/lib/.build-id/f3 ./usr/lib/.build-id/f3/f0458011745a57909258cd8c7c39d6c0125295 ./usr/lib/dracut ./usr/lib/dracut/modules.d ./usr/lib/dracut/modules.d/05rdma ./usr/lib/dracut/modules.d/05rdma/module-setup.sh ./usr/lib/modprobe.d ./usr/lib/modprobe.d/libmlx4.conf ./usr/lib/systemd/system/openibd.service ./usr/lib/systemd/system/rdma-ndd.service ./usr/lib/udev/rdma_rename ./usr/lib/udev/rules.d ./usr/lib/udev/rules.d/60-rdma-ndd.rules ./usr/lib/udev/rules.d/60-rdma-persistent-naming.rules ./usr/lib/udev/rules.d/75-rdma-description.rules ./usr/lib/udev/rules.d/90-rdma-umad.rules ./usr/lib64/libefa.so.1 ./usr/lib64/libefa.so.1.3.51.0 ./usr/lib64/libibumad.so.3 ./usr/lib64/libibumad.so.3.2.51.0 ./usr/lib64/libibverbs ./usr/lib64/libibverbs.so.1 ./usr/lib64/libibverbs.so.1.14.51.0 ./usr/lib64/libibverbs/libmlx5-rdmav34.so ./usr/lib64/libmlx4.so.1 ./usr/lib64/libmlx4.so.1.0.51.0 ./usr/lib64/libmlx5.so.1 ./usr/lib64/libmlx5.so.1.24.51.0 ./usr/lib64/librdmacm.so.1 ./usr/lib64/librdmacm.so.1.3.51.0 ./usr/lib64/rsocket ./usr/lib64/rsocket/librspreload.so ./usr/lib64/rsocket/librspreload.so.1 ./usr/lib64/rsocket/librspreload.so.1.0.0 ./usr/libexec/mlx4-setup.sh ./usr/sbin/cma_roce_mode ./usr/sbin/cma_roce_tos ./usr/sbin/common_irq_affinity.sh ./usr/sbin/compat_gid_gen ./usr/sbin/ib2ib_setup ./usr/sbin/ibdev2netdev ./usr/sbin/mlnx_affinity ./usr/sbin/mlnx_tune ./usr/sbin/mlnxofedctl ./usr/sbin/ofed_uninstall.sh ./usr/sbin/rdma-ndd ./usr/sbin/set_irq_affinity.sh ./usr/sbin/set_irq_affinity_bynode.sh ./usr/sbin/set_irq_affinity_cpulist.sh ./usr/sbin/setup_mr_cache.sh ./usr/sbin/show_counters ./usr/sbin/show_gids ./usr/sbin/show_irq_affinity.sh ./usr/sbin/show_irq_affinity_hints.sh ./usr/sbin/sysinfo-snapshot.py ./usr/sbin/vendor_post_uninstall.sh ./usr/sbin/vendor_pre_uninstall.sh ./usr/share/doc/libibverbs ./usr/share/doc/libibverbs/libibverbs.md ./usr/share/doc/librdmacm ./usr/share/doc/librdmacm/librdmacm.md ./usr/share/doc/mlnx-ofa_kernel ./usr/share/doc/mlnx-ofa_kernel/82-net-setup-link.rules ./usr/share/doc/mlnx-ofa_kernel/vf-net-link-name.sh ./usr/share/doc/mlnx-tools ./usr/share/doc/mlnx-tools/ib2ib_setup.txt ./usr/share/doc/perftest ./usr/share/doc/perftest/COPYING ./usr/share/doc/perftest/README ./usr/share/doc/perftest/runme ./usr/share/doc/rdma-core ./usr/share/doc/rdma-core/70-persistent-ipoib.rules ./usr/share/doc/rdma-core/README.md ./usr/share/doc/rdma-core/tag_matching.md ./usr/share/doc/rdma-core/udev.md ./usr/share/licenses/mlnx-tools ./usr/share/licenses/mlnx-tools/LICENSE ./usr/share/licenses/rdma-core ./usr/share/licenses/rdma-core/COPYING.BSD_FB ./usr/share/licenses/rdma-core/COPYING.BSD_MIT ./usr/share/licenses/rdma-core/COPYING.GPL2 ./usr/share/licenses/rdma-core/COPYING.md ./usr/share/man/man1/ib_atomic_bw.1.gz ./usr/share/man/man1/ib_atomic_lat.1.gz ./usr/share/man/man1/ib_read_bw.1.gz ./usr/share/man/man1/ib_read_lat.1.gz ./usr/share/man/man1/ib_send_bw.1.gz ./usr/share/man/man1/ib_send_lat.1.gz ./usr/share/man/man1/ib_write_bw.1.gz ./usr/share/man/man1/ib_write_lat.1.gz ./usr/share/man/man1/perftest.1.gz ./usr/share/man/man1/raw_ethernet_burst_lat.1.gz ./usr/share/man/man1/raw_ethernet_bw.1.gz ./usr/share/man/man1/raw_ethernet_fs_rate.1.gz ./usr/share/man/man1/raw_ethernet_lat.1.gz ./usr/share/man/man7/rsocket.7.gz ./usr/share/man/man8/ib2ib_setup.8.gz ./usr/share/man/man8/mlnxofedctl.8.gz ./usr/share/man/man8/rdma-ndd.8.gz ./usr/share/mlnx-tools/python/dcbnetlink.py ./usr/share/mlnx-tools/python/netlink.py ./usr/share/mlnx_ofed/mlnx_bf_assign_ct_cores.sh ./usr/share/smartupdate/mlnx-ofa_kernel/component.xml changed Integrated Smart Update Tools for Linux x64 Integrated Smart Update Tools for Linux x64 Integrated Smart Update Tools for Linux Integrated Smart Update Tools for Linux Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server サーバオプション ServerOptions Lights Out サーバ Server アプリケーション - システムマネジメント Application - System Management 英語（US） English (US) For prerequisite information, please see the iSUT Release Notes.

]]> For prerequisite information, please see the iSUT Release Notes.

]]> Download the rpm package to a directory on your hard drive and change to that directory. Install by typing rpm -Uvh hpsut-XXX.x86_64.rpm.

]]> 103C 3307 1590 00E4 103C 3307 0000 0000 103C 3306 1590 00E4 103C 3306 0000 0000 インストール後の再起動はオプションです。アップデートは再起動後に有効になります。ハードウェアの安定は、再起動しなくても維持されます。 Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot. 0 software:rpm sut-5.2.0-5.linux.x86_64.rpm Enter Polling interval in minutes. Minimum 5 minutes Maximum 1440 minutes. 0 12 0-9 * Mode in which SUT runs. 0 24 * * Enter the directory where the staging has to be done. The default path for staging directory is /var/tmp/sut/stagingdirectory. 0 255 0..9A..Z;a..z;-/ * Enter Polling interval in minutes. Minimum 5 minutes Maximum 1440 minutes. 0 12 0-9 * Mode in which SUT runs. 0 24 * * Enter the directory where the staging has to be done. The default path for staging directory is /var/tmp/sut/stagingdirectory. 0 255 0..9A..Z;a..z;-/ * sut-5.2.0-5.linux.x86_64.rpm file://./packages/sut-5.2.0-5.linux.x86_64.rpm ./opt/hp/hpsut/README.txt ./opt/sut/README.txt ./opt/sut/bin/gatherlogs.sh ./opt/sut/bin/hpsut ./opt/sut/bin/sut ./opt/sut/bin/x64/sum_drop_table_x64 ./opt/sut/config/sut_cfg_default.dat ./opt/sut/doc/OnDemandHelp.txt ./opt/sut/schemas/SUT.json ./opt/sut/schemas/SUTProvider.json ./opt/sut/schemas/SUTProvider_Gen10.json ./opt/sut/schemas/SUTRegistryEN_Legacy_zipped.json.gz ./opt/sut/schemas/SUTRegistryEN_Redfish.json ./opt/sut/schemas/SUTRegistryEN_Redfish_zipped.json.gz ./opt/sut/schemas/SUTRegistryJP_Legacy_zipped.json.gz ./opt/sut/schemas/SUTRegistryJP_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSettings.json ./opt/sut/schemas/SUTSettingsSchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSettingsSchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSettings_Gen10.json ./opt/sut/schemas/SUTSystemInventorySchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSystemInventorySchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTTasksettings.json ./opt/sut/schemas/SUTTasksettings_Legacy_zipped.json.gz ./opt/sut/schemas/SUTTasksettings_Redfish_zipped.json.gz ./opt/sut/schemas/SUT_Gen10.json ./opt/sut/scripts/sut.service ./opt/sut/scripts/sutd ./usr/lib/.build-id ./usr/lib/.build-id/2b ./usr/lib/.build-id/2b/6e9d7c334a5a9398be78689513be1b064ba675 ./usr/lib/.build-id/57 ./usr/lib/.build-id/57/374c6b2b55c3ea60f4ebaa7dfd1667b9b459f6 ./usr/share/man/man8/sut.8.gz ./usr/share/smartupdate/sut/component.xml new NVIDIAファームウェアパッケージ(FWPKG) for HPE InfiniBand NDR/Ethernet 400Gb 1ポートOSFP PCIe5 x16 MCX75310AAS-NEATアダプター。HPE部品番号P45641-B23およびP45641-H23 NVIDIA Firmware Package (FWPKG) for HPE InfiniBand NDR/Ethernet 400Gb 1-port OSFP PCIe5 x16 MCX75310AAS-NEAT Adapter : HPE part numbers P45641-B23 and P45641-H23 NVIDIAファームウェアパッケージ(FWPKG) for HPE InfiniBand NDR/Ethernet 400Gb 1ポートOSFP PCIe5 x16 MCX75310AAS-NEATアダプター。HPE部品番号P45641-B23およびP45641-H23 NVIDIA Firmware Package (FWPKG) for HPE InfiniBand NDR/Ethernet 400Gb 1-port OSFP PCIe5 x16 MCX75310AAS-NEAT Adapter : HPE part numbers P45641-B23 and P45641-H23 Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 ネットワーク Networking サーバ Server ファームウェア - ネットワーク Firmware - Network 英語（US） English (US) 以下のいずれかの方法を使用してPLDMファームウェアをフラッシュします

iLOrestツールを使用したフラッシュ
Smart Update Manager（SUM）を使用したフラッシュ
iLO GUIからのフラッシュ

ローカルホストOSの例：
ilorest flashfwpkg

リモートの例：
ilorest flashfwpkg --url -u -p

2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。

USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。

通常の手順でファームウェアおよびソフトウェアをアップデートします。

アップデートを直ちに有効にするにはシステムを再起動してください。

3. iLO GUIからのフラッシュ

任意のブラウザーを使用してiLO IPを参照し、資格情報を使用してログインします
PLDMでサポートされているアダプターがサーバーに存在していることを確認します
iLO GUIに移動します -> 左側から[Firmware and OS software]をクリックします -> [Update Firmware]をクリックします -> [Choose File]をクリックして、サポートされているPLDMファイルを参照します -> [Flash]ボタンをクリックします。
アップデートステータスが上部に表示され、インテグレーテッドマネジメントログ（IML）にログエントリーが記録されます。
ファームウェアアップデートを有効にするためにサーバーを再起動します。

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> Validated and Supported NDR / 400GbE cables and transceivers:

NDR HCA to Switch:

P45697-B22 HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 1m Splitter Direct Attach Copper Cable (HCA to Switch)
P45697-B23 HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 1.5m Splitter Direct Attach Copper Cable (HCA to Switch)
P45697-B24 HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 2m Splitter Direct Attach Copper Cable (HCA to Switch)
P45697-B25 HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 2.5m Splitter Direct Attach Copper Cable (HCA to Switch)
P45697-B26 HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 3m Splitter Direct Attach Copper Cable (HCA to Switch)
P50396-B21 HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 4m Splitter Active Copper Cable (HCA to Switch)
P50396-B22 HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 5m Splitter Active Copper Cable (HCA to Switch)
P49765-B21 HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 3m Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49765-B22 HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 5m Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49765-B23 HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 10m Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49765-B24 HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 15m Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49765-B25 HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 20m Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49765-B26 HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 30m Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)

NDR HCA side transceiver:

P49764-B21 HPE InfiniBand NDR/Ethernet 1x400Gb OSFP Multi-mode 50m HCA-side Transceiver (HCA-side Multi-mode optical fiber transceiver)

Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.

]]> Validated and Supported NDR / 400GbE cables and transceivers:

NDR HCA to Switch:

P45697-B22 HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 1m Splitter Direct Attach Copper Cable (HCA to Switch)
P45697-B23 HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 1.5m Splitter Direct Attach Copper Cable (HCA to Switch)
P45697-B24 HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 2m Splitter Direct Attach Copper Cable (HCA to Switch)
P45697-B25 HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 2.5m Splitter Direct Attach Copper Cable (HCA to Switch)
P45697-B26 HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 3m Splitter Direct Attach Copper Cable (HCA to Switch)
P50396-B21 HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 4m Splitter Active Copper Cable (HCA to Switch)
P50396-B22 HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 5m Splitter Active Copper Cable (HCA to Switch)
P49765-B21 HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 3m Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49765-B22 HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 5m Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49765-B23 HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 10m Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49765-B24 HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 15m Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49765-B25 HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 20m Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49765-B26 HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 30m Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)

NDR HCA side transceiver:

P49764-B21 HPE InfiniBand NDR/Ethernet 1x400Gb OSFP Multi-mode 50m HCA-side Transceiver (HCA-side Multi-mode optical fiber transceiver)

Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.

]]> 15B3 1021 15B3 0086 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic 28_41_1000-MCX75310AAS-NEAT_HPE2_Ax.pldm.fwpkg 28_41_1000-MCX75310AAS-NEAT_HPE2_Ax.pldm.fwpkg file://./packages/28_41_1000-MCX75310AAS-NEAT_HPE2_Ax.pldm.fwpkg 28_41_1000-MCX75310AAS-NEAT_HPE2_Ax.pldm.signed 28_41_1000-MCX75310AAS-NEAT_HPE2_Ax.pldm.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb HPE IB NDR/EN 400G 1p OSFP Adptr 0 True 28_41_1000-MCX75310AAS-NEAT_HPE2_Ax.pldm.signed 360 1 True True True Firmware True a6b1a447-382a-5a4f-15b3-102115b30086 28.41.1000 FWPKG-v2 Firmware Bmc new Firmware Package - UBM6 Backplane PIC PLDM Firmware for Gen10/Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM6 Backplane PIC PLDM Firmware for Gen10/Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM6 Backplane PIC PLDM Firmware for Gen10/Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM6 Backplane PIC PLDM Firmware for Gen10/Gen10P/Gen11/Gen12 servers usage Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server サーバオプション ServerOptions サーバ Server ファームウェア - システム Firmware - System 英語（US） English (US)

iLO 6 version 1.62 or later is required for Gen12 servers

iLO 6 version 1.10 or later is required for Gen11 servers

iLO 5 version 2.72 or later is required for Gen10P servers

]]>

iLO 6 version 1.62 or later is required for Gen12 servers

iLO 6 version 1.10 or later is required for Gen11 servers

iLO 5 version 2.72 or later is required for Gen10P servers

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)

]]> 9675b54e-1c96-44c3-a7a1-901506000000 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要ありません。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:sd:ubm HPE_UBM6_1.04_A.fwpkg HPE_UBM6_1.04_A.fwpkg file://./packages/HPE_UBM6_1.04_A.fwpkg HPE_UBM6_1.04_A.HPb HPE_UBM6_1.04_A.xml payload.json 4149ebb7-d64b-4654-b679-4280f349ea50 UBM6 Backplane PIC 0 True HPE_UBM6_1.04_A.HPb 120 1 True False False Firmware True 9675b54e-1c96-44c3-a7a1-901506000000 1.04 FWPKG-v2 Firmware Bmc new Universal Firmware Package for Drives - VR000480KXLXF Universal Firmware Package for Drives - VR000480KXLXF Universal Firmware Package for Drives - VR000480KXLXF Universal Firmware Package for Drives - VR000480KXLXF Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server ストレージ Storage Firmware - PCIe NVMe Storage Disk Firmware - PCIe NVMe Storage Disk 英語（US） English (US) Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> Release Version and/or Date:
     HPK3
Last Recommended or Critical Version:
     None
Previous Version of Firmware:
     None
Enhancements/New Features:
     None
Problems Fixed:
    Firmware maintenance release of Samsung M.2 NVMe SSD with HPK3
Known Issues:
     None

]]> VR000480KXLXF アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme Samsung_PM9A3_PM9A3M2HPK3.fwpkg Samsung_PM9A3_PM9A3M2HPK3.fwpkg file://./packages/Samsung_PM9A3_PM9A3M2HPK3.fwpkg payload.json Samsung_PM9A3_PM9A3M2HPK3.HPb Samsung_PM9A3_PM9A3M2HPK3.xml f6de0320-2e0f-489a-b238-6dd8ae7c3811 Samsung-PM9A3-NVMe 0 True Samsung_PM9A3_PM9A3M2HPK3.HPb 120 1 True True True Firmware True 562340a5-3052-3030-3438-304b584c5846 HPK3 FWPKG-v2 Firmware Bmc Uefi new Intelファームウェアパッケージfor E810-XXVDA4 Ethernet 10/25Gb 4ポートSFP28 OCP3アダプター Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter Intelファームウェアパッケージfor E810-XXVDA4 Ethernet 10/25Gb 4ポートSFP28 OCP3アダプター Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 ネットワーク Networking サーバ Server ファームウェア - ネットワーク Firmware - Network 英語（US） English (US) 以下のいずれかの方法を使用してPLDMファームウェアをフラッシュします

iLOrestツールを使用したフラッシュ
Smart Update Manager（SUM）を使用したフラッシュ
iLO GUIからのフラッシュ

ローカルホストOSの例：
ilorest flashfwpkg

リモートの例：
ilorest flashfwpkg --url -u -p

2. このファームウェアパッケージは、Smart Update Manager(SUM)の最新バージョンでもインストールできます。

USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。

通常の手順でファームウェアおよびソフトウェアをアップデートします。

アップデートを直ちに有効にするにはシステムを再起動してください。

3. iLO GUIからのフラッシュ

任意のブラウザーを使用してiLO IPを参照し、資格情報を使用してログインします
PLDMでサポートされているアダプターがサーバーに存在していることを確認します
iLO GUIに移動します -> 左側から[Firmware and OS software]をクリックします -> [Update Firmware]をクリックします -> [Choose File]をクリックして、サポートされているPLDMファイルを参照します -> [Flash]ボタンをクリックします。
アップデートステータスが上部に表示され、インテグレーテッドマネジメントログ（IML）にログエントリが記録されます。
ファームウェアアップデートを有効にするためにサーバーを再起動します。

追加情報:

ファームウェアをアップデートする場合は、リビジョン履歴を参照し、必要なバージョンまで1つずつアップデートしていきます。

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

Additional Information:

When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.

]]> このソフトウェアパッケージは、以下にリストされるサポートされるネットワークアダプターの次のファームウェアのバージョンを含みます：

NIC	EEPROM ID	OROMバージョン	NVMバージョン
Intel E810-XXVDA4 Ethernet 10/25Gb 4ポートSFP28 OCP3	8001D8B8	1.3597.0	4.50

NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.5と示されます

]]> This software package contains the following firmware versions for the below listed supported network adapters:

NIC	EEPROM ID	OROM Version	NVM Version
Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3	8001D8B8	1.3597.0	4.50

In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.5

]]> 8086 1593 8086 000C アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_XXV4_OCP_4p50_NCSIwPLDMoMCTP_8001D8B8.fwpkg HPE_E810_XXV4_OCP_4p50_NCSIwPLDMoMCTP_8001D8B8.fwpkg file://./packages/HPE_E810_XXV4_OCP_4p50_NCSIwPLDMoMCTP_8001D8B8.fwpkg HPE_E810_XXV4_OCP_4p50_NCSIwPLDMoMCTP_8001D8B8.HPb HPE_E810_XXV4_OCP_4p50_NCSIwPLDMoMCTP_8001D8B8.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-XXVDA4 OCP3 adapter 0 True HPE_E810_XXV4_OCP_4p50_NCSIwPLDMoMCTP_8001D8B8.HPb 360 1 True True True Firmware True a6b1a447-382a-5a4f-8086-15938086000c 4.50 FWPKG-v2 Firmware Bmc new Universal Firmware Package for Drives - MO000800KYDZK, MO001600KYDZR, MO003200KYDZT, MO006400KYDZU, VO000960KYDZH, VO001920KYDZL, VO003840KYDZN, VO001536KYDZQ and VO007680KYDZP Universal Firmware Package for Drives - MO000800KYDZK, MO001600KYDZR, MO003200KYDZT, MO006400KYDZU, VO000960KYDZH, VO001920KYDZL, VO003840KYDZN, VO001536KYDZQ and VO007680KYDZP Universal Firmware Package for Drives - MO000800KYDZK, MO001600KYDZR, MO003200KYDZT, MO006400KYDZU, VO000960KYDZH, VO001920KYDZL, VO003840KYDZN, VO001536KYDZQ and VO007680KYDZP Universal Firmware Package for Drives - MO000800KYDZK, MO001600KYDZR, MO003200KYDZT, MO006400KYDZU, VO000960KYDZH, VO001920KYDZL, VO003840KYDZN, VO001536KYDZQ and VO007680KYDZP Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server ストレージ Storage Firmware - PCIe NVMe Storage Disk Firmware - PCIe NVMe Storage Disk 英語（US） English (US) Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> MO006400KYDZU MO003200KYDZT MO001600KYDZR MO000800KYDZK VO007680KYDZP VO003840KYDZN VO001920KYDZL VO000960KYDZH VO001536KYDZQ アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme Micron_7500_Micron_7500_M7500ALLHPK1.fwpkg Micron_7500_Micron_7500_M7500ALLHPK1.fwpkg file://./packages/Micron_7500_Micron_7500_M7500ALLHPK1.fwpkg Micron_7500_Micron_7500_M7500ALLHPK1.HPb Micron_7500_Micron_7500_M7500ALLHPK1.xml payload.json f6de0320-2e0f-489a-b238-6dd8ae7c3811 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 4d2340a5-304f-3030-3830-304b59445a4b HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 4d2340a5-304f-3130-3630-304b59445a52 HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 4d2340a5-304f-3330-3230-304b59445a54 HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 4d2340a5-304f-3630-3430-304b59445a55 HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 562340a5-304f-3030-3936-304b59445a48 HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 562340a5-304f-3130-3533-364b59445a51 HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 562340a5-304f-3130-3932-304b59445a4c HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 562340a5-304f-3330-3834-304b59445a4e HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 562340a5-304f-3730-3638-304b59445a50 HPK1 FWPKG-v2 ComboFirmware Bmc Uefi new Firmware Package - UBM4 Backplane PIC PLDM Firmware for Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM4 Backplane PIC PLDM Firmware for Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM4 Backplane PIC PLDM Firmware for Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM4 Backplane PIC PLDM Firmware for Gen10P/Gen11/Gen12 servers usage Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server サーバオプション ServerOptions サーバ Server ファームウェア - システム Firmware - System 英語（US） English (US)

iLO 6 version 1.62 or later is required for Gen12 servers

iLO 6 version 1.10 or later is required for Gen11 servers

iLO 5 version 2.72 or later is required for Gen10P servers

]]>

iLO 6 version 1.62 or later is required for Gen12 servers

iLO 6 version 1.10 or later is required for Gen11 servers

iLO 5 version 2.72 or later is required for Gen10P servers

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)

]]> 9675b54e-1c96-44c3-a7a1-901504000000 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要ありません。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:sd:ubm HPE_UBM4_1.24_F.fwpkg HPE_UBM4_1.24_F.fwpkg file://./packages/HPE_UBM4_1.24_F.fwpkg HPE_UBM4_1.24_F.HPb HPE_UBM4_1.24_F.xml payload.json 4149ebb7-d64b-4654-b679-4280f349ea50 UBM4 Backplane PIC 0 True HPE_UBM4_1.24_F.HPb 120 1 True False False Firmware True 9675b54e-1c96-44c3-a7a1-901504000000 1.24 FWPKG-v2 Firmware Bmc new Intel iceドライバーfor Red Hat Enterprise Linux 9 Intel ice Drivers for Red Hat Enterprise Linux 9 Intel iceドライバーfor Red Hat Enterprise Linux 9 Intel ice Drivers for Red Hat Enterprise Linux 9 Red Hat Enterprise Linux 9 Server サーバオプション ServerOptions ネットワーク Networking サーバ Server ドライバ - ネットワーク Driver - Network 英語（US） English (US) この製品が提供するバイナリRPMパッケージは、Linuxディストリビューションに同梱されているデフォルトのインボックスカーネル（標準カーネル）用に特別に構築された、コンパイル済みのカーネルモジュールドライバーです。 HPEは、これらのコンパイル済みのカーネルモジュールRPMを指定のカーネルで使用するためにテストし、承認しました。

To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm

]]> 8086 1592 8086 0002 8086 1592 8086 0006 8086 159B 8086 0003 8086 159B 8086 0005 8086 1593 8086 0005 8086 1592 8086 000E 8086 1593 8086 000C 8086 1593 8086 000E アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要ありません。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm software:rpm kmod-ice-1.14.11-1.rhel9u4.x86_64.rpm kmod-ice-1.14.11-1.rhel9u3.x86_64.rpm file://./packages/kmod-ice-1.14.11-1.rhel9u3.x86_64.rpm ./etc/depmod.d/ice.conf ./etc/dracut.conf.d/ice-oob.conf ./lib/firmware/updates/intel/ice/ddp/LICENSE ./lib/firmware/updates/intel/ice/ddp/ice-1.3.36.0.pkg ./lib/firmware/updates/intel/ice/ddp/ice.pkg ./lib/modules/5.14.0-362.8.1.el9_3.x86_64 ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra/ice ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra/ice/ice.ko ./usr/lib/.build-id ./usr/lib/.build-id/38 ./usr/lib/.build-id/38/8cb4c66d56f16f85cffad02da2b26976277f9c ./usr/share/doc/ice ./usr/share/doc/ice/COPYING ./usr/share/doc/ice/README ./usr/share/doc/ice/pci.updates ./usr/share/man/man7/ice.7.gz ./usr/share/smartupdate/kmod-ice/component.xml kmod-ice-1.14.11-1.rhel9u4.x86_64.rpm file://./packages/kmod-ice-1.14.11-1.rhel9u4.x86_64.rpm ./etc/depmod.d/ice.conf ./etc/dracut.conf.d/ice-oob.conf ./lib/firmware/updates/intel/ice/ddp/LICENSE ./lib/firmware/updates/intel/ice/ddp/ice-1.3.36.0.pkg ./lib/firmware/updates/intel/ice/ddp/ice.pkg ./lib/modules/5.14.0-427.13.1.el9_4.x86_64 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/ice ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/ice/ice.ko ./usr/lib/.build-id ./usr/lib/.build-id/29 ./usr/lib/.build-id/29/31a63110916620608b24b160764bf67e39ac9c ./usr/share/doc/ice ./usr/share/doc/ice/COPYING ./usr/share/doc/ice/README ./usr/share/doc/ice/pci.updates ./usr/share/man/man7/ice.7.gz ./usr/share/smartupdate/kmod-ice/component.xml new Universal Firmware Package for Drives - MO000800KXPRV, MO001600KXPTR, MO003200KXPTT, MO006400KXPTU, VO000960KXPRU, VO001920KXPTN, VO003840KXPTP and VO007680KXPTQ Universal Firmware Package for Drives - MO000800KXPRV, MO001600KXPTR, MO003200KXPTT, MO006400KXPTU, VO000960KXPRU, VO001920KXPTN, VO003840KXPTP and VO007680KXPTQ Universal Firmware Package for Drives - MO000800KXPRV, MO001600KXPTR, MO003200KXPTT, MO006400KXPTU, VO000960KXPRU, VO001920KXPTN, VO003840KXPTP and VO007680KXPTQ Universal Firmware Package for Drives - MO000800KXPRV, MO001600KXPTR, MO003200KXPTT, MO006400KXPTU, VO000960KXPRU, VO001920KXPTN, VO003840KXPTP and VO007680KXPTQ Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server ストレージ Storage Firmware - PCIe NVMe Storage Disk Firmware - PCIe NVMe Storage Disk 英語（US） English (US) Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> Release Version and/or Date:
HPK2

Last Recommended or Critical Version:
HPK0

Previous Version of Firmware:
HPK0

]]> Release Version and/or Date:
HPK2

Last Recommended or Critical Version:
HPK0

Previous Version of Firmware:
HPK0

]]> MO000800KXPRV MO001600KXPTR MO003200KXPTT MO006400KXPTU VO000960KXPRU VO001920KXPTN VO003840KXPTP VO007680KXPTQ アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme SKHynix_PE81X0_KPE81X0AHPK2.fwpkg SKHynix_PE81X0_KPE81X0AHPK2.fwpkg file://./packages/SKHynix_PE81X0_KPE81X0AHPK2.fwpkg payload.json SKHynix_PE81X0_KPE81X0AHPK2.HPb SKHynix_PE81X0_KPE81X0AHPK2.xml f6de0320-2e0f-489a-b238-6dd8ae7c3811 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 4d2340a5-304f-3030-3830-304b58505256 HPK2 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 4d2340a5-304f-3130-3630-304b58505452 HPK2 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 4d2340a5-304f-3330-3230-304b58505454 HPK2 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 4d2340a5-304f-3630-3430-304b58505455 HPK2 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 562340a5-304f-3030-3936-304b58505255 HPK2 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 562340a5-304f-3130-3932-304b5850544e HPK2 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 562340a5-304f-3330-3834-304b58505450 HPK2 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 562340a5-304f-3730-3638-304b58505451 HPK2 FWPKG-v2 ComboFirmware Bmc Uefi new オンラインROMフラッシュファームウェアパッケージ - HPE Integrated Lights-Out 6 Online ROM Flash Firmware Package - HPE Integrated Lights-Out 6 HPE Integrated Lights-Out 6 HPE Integrated Lights-Out 6 Hewlett Packard Enterprise Hewlett Packard Enterprise Lights Out Lights Out サーバ Server ファームウェア - Lights-Outマネジメント Firmware - Lights-Out Management 英語（US） English (US) Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities
for best performance:

RESTful Interface Tool (iLOREST) 5.1.0
HPQLOCFG v6.0.0
Lights-Out XML Scripting Sample bundle 6.00.0
HPONCFG Windows 6.0.0
HPONCFG Linux 6.0.0(A)
LOCFG v6.00.0 or later
HPLOMIG 6.0.0
Schema extender 6.1.0
Snap-in (x86) 6.0.0
Snap-in (x64) 6.0.0

NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.

NOTE: Below Points are applicable only for Intel and AMD

•   Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
•   The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
•   The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).

Supported Utilities for RL300

Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
• RESTful Interface Tool (iLOREST) 4.8.0.0

NOTE: Below Points are applicable only for RL300

Updated utilities and system libraries are required to support the iLO in High Security and Production Modes.
CNSA and FIPS mode are currently not supported. See the iLO 6 User Guide for the steps on how to disable FIPS and CNSA mode.
iLO Amplifier Pack, HPE GreenLake Compute Ops Management (COM), HPE OneView, and HPE Infosight for Servers do not support HPE ProLiant RL300 Gen 11 platform.
RedHat Enterprise Linux 8.6 is supported on HPE ProLiant RL300 servers

For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide

]]> Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities
for best performance:

RESTful Interface Tool (iLOREST) 5.1.0
HPQLOCFG v6.0.0
Lights-Out XML Scripting Sample bundle 6.00.0
HPONCFG Windows 6.0.0
HPONCFG Linux 6.0.0(A)
LOCFG v6.00.0 or later
HPLOMIG 6.0.0
Schema extender 6.1.0
Snap-in (x86) 6.0.0
Snap-in (x64) 6.0.0

NOTE: Below Points are applicable only for Intel and AMD

Supported Utilities for RL300

Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
• RESTful Interface Tool (iLOREST) 4.8.0.0

NOTE: Below Points are applicable only for RL300

Updated utilities and system libraries are required to support the iLO in High Security and Production Modes.
CNSA and FIPS mode are currently not supported. See the iLO 6 User Guide for the steps on how to disable FIPS and CNSA mode.
iLO Amplifier Pack, HPE GreenLake Compute Ops Management (COM), HPE OneView, and HPE Infosight for Servers do not support HPE ProLiant RL300 Gen 11 platform.
RedHat Enterprise Linux 8.6 is supported on HPE ProLiant RL300 servers

For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide

]]> To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>

This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

]]> To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>

This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

]]>

iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:

http://www.hpe.com/info/ilo-docs

Select your lights-out product, then support & documents, then manuals.

Check the online help for additional information about how to use features.
Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.

]]>

iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:

http://www.hpe.com/info/ilo-docs

Select your lights-out product, then support & documents, then manuals.

Check the online help for additional information about how to use features.
Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.

]]> 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 103c 3307 1590 00E4 103c 3306 1590 00E4 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要ありません。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:ilo6 ilo6_163.fwpkg ilo6_163.fwpkg file://./packages/ilo6_163.fwpkg ilo6_163.bin ilo6_163.xml payload.json readme.txt 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 iLO 6 120 True ilo6_163.bin 600 1 False False False False Firmware True e6d3c844-14a6-4f1f-84a3-c06013910406 1.63 iLO 6 120 True ilo6_163.bin 600 1 False False False False Firmware True e6d3c844-14a6-4f1f-84a3-c06013910306 1.63 iLO 6 120 True ilo6_163.bin 600 1 False False False False Firmware True e6d3c844-14a6-4f1f-84a3-c06013910206 1.63 iLO 6 120 True ilo6_163.bin 600 1 False False False False Firmware True e6d3c844-14a6-4f1f-84a3-c06013910106 1.63 iLO 6 120 True ilo6_163.bin 600 1 False False False False Firmware True e6d3c844-14a6-4f1f-84a3-c06013910006 1.63 FWPKG-v2 ComboFirmware Bmc new Intelファームウェアパッケージfor E810-XXVDA2 Ethernet 10/25Gb 2ポートSFP28 OCP3アダプター Intel Firmware Package For E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter Intelファームウェアパッケージfor E810-XXVDA2 Ethernet 10/25Gb 2ポートSFP28 OCP3アダプター Intel Firmware Package For E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 ネットワーク Networking サーバ Server ファームウェア - ネットワーク Firmware - Network 英語（US） English (US) 以下のいずれかの方法を使用してPLDMファームウェアをフラッシュします

iLOrestツールを使用したフラッシュ
Smart Update Manager（SUM）を使用したフラッシュ
iLO GUIからのフラッシュ

ローカルホストOSの例：
ilorest flashfwpkg

リモートの例：
ilorest flashfwpkg --url -u -p

2. このファームウェアパッケージは、Smart Update Manager(SUM)の最新バージョンでもインストールできます。

USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。

通常の手順でファームウェアおよびソフトウェアをアップデートします。

アップデートを直ちに有効にするにはシステムを再起動してください。

3. iLO GUIからのフラッシュ

任意のブラウザーを使用してiLO IPを参照し、資格情報を使用してログインします
PLDMでサポートされているアダプターがサーバーに存在していることを確認します
iLO GUIに移動します -> 左側から[Firmware and OS software]をクリックします -> [Update Firmware]をクリックします -> [Choose File]をクリックして、サポートされているPLDMファイルを参照します -> [Flash]ボタンをクリックします。
アップデートステータスが上部に表示され、インテグレーテッドマネジメントログ（IML）にログエントリが記録されます。
ファームウェアアップデートを有効にするためにサーバーを再起動します。

追加情報:

ファームウェアをアップデートする場合は、リビジョン履歴を参照し、必要なバージョンまで1つずつアップデートしていきます。

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

Additional Information:

When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.

]]> このソフトウェアパッケージは、以下にリストされるサポートされるネットワークアダプターの次のファームウェアのバージョンを含みます：

NIC	EEPROM ID	OROMバージョン	NVMバージョン
Intel E810-XXVDA2 Ethernet 10/25Gb 2ポートSFP28 OCP3アダプター	8001D8B3	1.3597.0	4.50

NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.5と示されます

]]> This software package contains the following firmware versions for the below listed supported network adapters:

NIC	EEPROM ID	OROM Version	NVM Version
Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter	8001D8B3	1.3597.0	4.50

In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.5

]]> 8086 159B 8086 0005 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_XXVDA2_SD_OCP_4p50_NCSIwPLDMoMCTP_8001D8B3.fwpkg HPE_E810_XXVDA2_SD_OCP_4p50_NCSIwPLDMoMCTP_8001D8B3.fwpkg file://./packages/HPE_E810_XXVDA2_SD_OCP_4p50_NCSIwPLDMoMCTP_8001D8B3.fwpkg HPE_E810_XXVDA2_SD_OCP_4p50_NCSIwPLDMoMCTP_8001D8B3.HPb HPE_E810_XXVDA2_SD_OCP_4p50_NCSIwPLDMoMCTP_8001D8B3.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-XXVDA2 OCP3 adapter 0 True HPE_E810_XXVDA2_SD_OCP_4p50_NCSIwPLDMoMCTP_8001D8B3.HPb 360 1 True True True Firmware True a6b1a447-382a-5a4f-8086-159b80860005 4.50 FWPKG-v2 Firmware Bmc new Broadcomファームウェアパッケージfor BCM5741xアダプター Broadcom Firmware Package for BCM5741x adapters Broadcomファームウェアパッケージfor BCM5741xアダプター Broadcom Firmware Package for BCM5741x adapters Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 サーバオプション ServerOptions ネットワーク Networking サーバ Server ファームウェア - ネットワーク Firmware - Network 英語（US） English (US) Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

Additional Information:

When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

Additional Information:

When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.

]]>

This software package contains NVM Image version 230.1.123.0 with the following firmware versions:

NIC	Bootcode Version	NCSI Version	MBA Version	UEFI Version	RoCE Version
HPE Ethernet 10Gb 2-port SFP+ BCM57412 Adapter	230.0.168.0	230.0.168.0	230.0.167.0	230.0.167.0	230.0.168.0
HPE Ethernet 10Gb 2-port SFP+ BCM57412 OCP3 Adapter
HPE Ethernet 10Gb 2-port BaseT BCM57416 Adapter
HPE Ethernet 10Gb 2-port BaseT BCM57416 OCP3 Adapter
HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 Adapter
HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 OCP3 Adapter

Recommend to upgrade to the NVM Image version 226.1.107.0 firmware first for this firmware package, please refer to the following link.

https://www.hpe.com/global/swpublishing/MTX-0572f282f8134709b2788a1a31

]]>

This software package contains NVM Image version 230.1.123.0 with the following firmware versions:

NIC	Bootcode Version	NCSI Version	MBA Version	UEFI Version	RoCE Version
HPE Ethernet 10Gb 2-port SFP+ BCM57412 Adapter	230.0.168.0	230.0.168.0	230.0.167.0	230.0.167.0	230.0.168.0
HPE Ethernet 10Gb 2-port SFP+ BCM57412 OCP3 Adapter
HPE Ethernet 10Gb 2-port BaseT BCM57416 Adapter
HPE Ethernet 10Gb 2-port BaseT BCM57416 OCP3 Adapter
HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 Adapter
HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 OCP3 Adapter

Recommend to upgrade to the NVM Image version 226.1.107.0 firmware first for this firmware package, please refer to the following link.

https://www.hpe.com/global/swpublishing/MTX-0572f282f8134709b2788a1a31

]]> 14E4 16D7 14E4 1597 14E4 16D7 14E4 1596 14E4 16D8 14E4 1593 14E4 16D8 14E4 1592 14E4 16D6 14E4 1595 14E4 16D6 14E4 1594 14E4 16EE 14E4 1593 14E4 16EE 14E4 1592 14E4 16EF 14E4 1593 14E4 16EF 14E4 1592 14E4 16EB 14E4 1595 14E4 16EB 14E4 1594 14E4 16ED 14E4 1597 14E4 16ED 14E4 1596 14E4 16DE 14E4 1595 14E4 16DE 14E4 1594 14E4 16EC 14E4 1597 14E4 16EC 14E4 1596 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic bcm230.1.123.0.pup.fwpkg bcm230.1.123.0.pup.fwpkg file://./packages/bcm230.1.123.0.pup.fwpkg bcm230.1.123.0.pup.HPb bcm230.1.123.0.pup.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16d614e41595 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16de14e41595 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16eb14e41595 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16d614e41594 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16de14e41594 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16eb14e41594 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16d714e41597 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ec14e41597 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ed14e41597 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16d714e41596 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ec14e41596 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ed14e41596 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16d814e41593 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ee14e41593 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ef14e41593 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16d814e41592 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ee14e41592 230.1.123.0 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm230.1.123.0.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ef14e41592 230.1.123.0 226.1.107.0 FWPKG-v2 ComboFirmware Bmc new Universal Firmware Package for Drives - MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO001920KYDMT, VO003840KYDMV, VO007680KYDNA and VO015360KYDNB Universal Firmware Package for Drives - MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO001920KYDMT, VO003840KYDMV, VO007680KYDNA and VO015360KYDNB Universal Firmware Package for Drives - MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO001920KYDMT, VO003840KYDMV, VO007680KYDNA and VO015360KYDNB Universal Firmware Package for Drives - MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO001920KYDMT, VO003840KYDMV, VO007680KYDNA and VO015360KYDNB Hewlett Packard Enterprise Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server ストレージ Storage Firmware - PCIe NVMe Storage Disk Firmware - PCIe NVMe Storage Disk 英語（US） English (US) Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> MO001600KYDMU MO003200KYDNC MO006400KYDND VO001920KYDMT VO003840KYDMV VO007680KYDNA VO015360KYDNB アップデートの効果とハードウェアの安定を得るために、インストール後再起動が必要になることがあります。 Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme Samsung_PM173X_GPM173XAHPK5.fwpkg Samsung_PM173X_GPM173XAHPK5.fwpkg file://./packages/Samsung_PM173X_GPM173XAHPK5.fwpkg payload.json Samsung_PM173X_GPM173XAHPK5.HPb Samsung_PM173X_GPM173XAHPK5.xml f6de0320-2e0f-489a-b238-6dd8ae7c3811 Samsung-PM173X-NVMe 0 True Samsung_PM173X_GPM173XAHPK5.HPb 120 1 True True True Firmware True 4d2340a5-304f-3130-3630-304b59444d55 HPK5 Samsung-PM173X-NVMe 0 True Samsung_PM173X_GPM173XAHPK5.HPb 120 1 True True True Firmware True 4d2340a5-304f-3330-3230-304b59444e43 HPK5 Samsung-PM173X-NVMe 0 True Samsung_PM173X_GPM173XAHPK5.HPb 120 1 True True True Firmware True 4d2340a5-304f-3630-3430-304b59444e44 HPK5 Samsung-PM173X-NVMe 0 True Samsung_PM173X_GPM173XAHPK5.HPb 120 1 True True True Firmware True 562340a5-304f-3130-3932-304b59444d54 HPK5 Samsung-PM173X-NVMe 0 True Samsung_PM173X_GPM173XAHPK5.HPb 120 1 True True True Firmware True 562340a5-304f-3330-3834-304b59444d56 HPK5 Samsung-PM173X-NVMe 0 True Samsung_PM173X_GPM173XAHPK5.HPb 120 1 True True True Firmware True 562340a5-304f-3730-3638-304b59444e41 HPK5 Samsung-PM173X-NVMe 0 True Samsung_PM173X_GPM173XAHPK5.HPb 120 1 True True True Firmware True 562340a5-304f-3531-3336-304b59444e42 HPK5 FWPKG-v2 ComboFirmware Bmc Uefi new NVIDIAファームウェアパッケージ(FWPKG) for HPE InfiniBand NDR200/Ethernet 200Gb 1ポートOSFP PCIe5 x16 MCX75310AAS-HEATアダプター。HPE部品番号P45642-B22およびP45642-H22 NVIDIA Firmware Package (FWPKG) for HPE InfiniBand NDR200/Ethernet 200Gb 1-port OSFP PCIe5 x16 MCX75310AAS-HEAT Adapter : HPE part numbers P45642-B22 and P45642-H22 NVIDIAファームウェアパッケージ(FWPKG) for HPE InfiniBand NDR200/Ethernet 200Gb 1ポートOSFP PCIe5 x16 MCX75310AAS-HEATアダプター。HPE部品番号P45642-B22およびP45642-H22 NVIDIA Firmware Package (FWPKG) for HPE InfiniBand NDR200/Ethernet 200Gb 1-port OSFP PCIe5 x16 MCX75310AAS-HEAT Adapter : HPE part numbers P45642-B22 and P45642-H22 Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 サーバオプション ServerOptions ネットワーク Networking サーバ Server ファームウェア - ネットワーク Firmware - Network 英語（US） English (US) FWPKGは、iLO5ファームウェアバージョンが2.30以降の場合にのみ機能します。

]]> FWPKG will work only if the iLO5 firmware version is 2.30 or higher.

]]> 以下のいずれかの方法を使用してPLDMファームウェアをフラッシュします

iLOrestツールを使用したフラッシュ
Smart Update Manager（SUM）を使用したフラッシュ
iLO GUIからのフラッシュ

ローカルホストOSの例：
ilorest flashfwpkg

リモートの例：
ilorest flashfwpkg --url -u -p

2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。

USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。

通常の手順でファームウェアおよびソフトウェアをアップデートします。

アップデートを直ちに有効にするにはシステムを再起動してください。

3. iLO GUIからのフラッシュ

任意のブラウザーを使用してiLO IPを参照し、資格情報を使用してログインします
PLDMでサポートされているアダプターがサーバーに存在していることを確認します
iLO GUIに移動します -> 左側から[Firmware and OS software]をクリックします -> [Update Firmware]をクリックします -> [Choose File]をクリックして、サポートされているPLDMファイルを参照します -> [Flash]ボタンをクリックします。
アップデートステータスが上部に表示され、インテグレーテッドマネジメントログ（IML）にログエントリーが記録されます。
ファームウェアアップデートを有効にするためにサーバーを再起動します。

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> Validated and Supported NDR200 / 200 GbE cables and transceivers:

NDR200 HCA to Switch:

P45698-B22 HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 1m Splitter Direct Attach Copper Cable (HCA to Switch)
P45698-B24 HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 2m Splitter Direct Attach Copper Cable (HCA to Switch)
P45698-B25 HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 2.5m Splitter Direct Attach Copper Cable (HCA to Switch)
P45698-B26 HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 3m Splitter Direct Attach Copper Cable (HCA to Switch)
P45698-B23 HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 1.5m Splitter Direct Attach Copper Cable (HCA to Switch)
P50397-B21 HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 4m Splitter Active Copper Cable (HCA to Switch)
P50397-B22 HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 5m Splitter Active Copper Cable (HCA to Switch)
P49766-B21 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 3m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B22 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 5m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B23 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 10m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B24 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 15m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B25 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 20m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B26 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 30m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)

NDR200 HCA side transceiver:

P49764-B21 HPE InfiniBand NDR/Ethernet 1x400Gb OSFP Multi-mode 50m HCA-side Transceiver (HCA Multi-mode optical fiber transceiver)

Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.

]]> Validated and Supported NDR200 / 200 GbE cables and transceivers:

NDR200 HCA to Switch:

P45698-B22 HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 1m Splitter Direct Attach Copper Cable (HCA to Switch)
P45698-B24 HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 2m Splitter Direct Attach Copper Cable (HCA to Switch)
P45698-B25 HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 2.5m Splitter Direct Attach Copper Cable (HCA to Switch)
P45698-B26 HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 3m Splitter Direct Attach Copper Cable (HCA to Switch)
P45698-B23 HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 1.5m Splitter Direct Attach Copper Cable (HCA to Switch)
P50397-B21 HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 4m Splitter Active Copper Cable (HCA to Switch)
P50397-B22 HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 5m Splitter Active Copper Cable (HCA to Switch)
P49766-B21 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 3m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B22 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 5m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B23 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 10m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B24 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 15m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B25 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 20m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
P49766-B26 HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 30m Splitter Cable (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)

NDR200 HCA side transceiver:

P49764-B21 HPE InfiniBand NDR/Ethernet 1x400Gb OSFP Multi-mode 50m HCA-side Transceiver (HCA Multi-mode optical fiber transceiver)

Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.

]]> 15B3 1021 15B3 0085 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic 28_41_1000-MCX75310AAS-HEAT_HPE2_Ax.pldm.fwpkg 28_41_1000-MCX75310AAS-HEAT_HPE2_Ax.pldm.fwpkg file://./packages/28_41_1000-MCX75310AAS-HEAT_HPE2_Ax.pldm.fwpkg 28_41_1000-MCX75310AAS-HEAT_HPE2_Ax.pldm.signed 28_41_1000-MCX75310AAS-HEAT_HPE2_Ax.pldm.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb HPE IB NDR200/EN 200G 1p OSFP Adptr 0 True 28_41_1000-MCX75310AAS-HEAT_HPE2_Ax.pldm.signed 360 1 True True True Firmware True a6b1a447-382a-5a4f-15b3-102115b30085 28.41.1000 FWPKG-v2 Firmware Bmc new Intelファームウェアパッケージfor E810-XXVDA2 Ethernet 10/25Gb 2ポートSFP28アダプター Intel Firmware Package For E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter Intelファームウェアパッケージfor E810-XXVDA2 Ethernet 10/25Gb 2ポートSFP28アダプター Intel Firmware Package For E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 ネットワーク Networking サーバ Server ファームウェア - ネットワーク Firmware - Network 英語（US） English (US) 以下のいずれかの方法を使用してPLDMファームウェアをフラッシュします

iLOrestツールを使用したフラッシュ
Smart Update Manager（SUM）を使用したフラッシュ
iLO GUIからのフラッシュ

ローカルホストOSの例：
ilorest flashfwpkg

リモートの例：
ilorest flashfwpkg --url -u -p

2. このファームウェアパッケージは、Smart Update Manager(SUM)の最新バージョンでもインストールできます。

USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。

通常の手順でファームウェアおよびソフトウェアをアップデートします。

アップデートを直ちに有効にするにはシステムを再起動してください。

3. iLO GUIからのフラッシュ

任意のブラウザーを使用してiLO IPを参照し、資格情報を使用してログインします
PLDMでサポートされているアダプターがサーバーに存在していることを確認します
iLO GUIに移動します -> 左側から[Firmware and OS software]をクリックします -> [Update Firmware]をクリックします -> [Choose File]をクリックして、サポートされているPLDMファイルを参照します -> [Flash]ボタンをクリックします。
アップデートステータスが上部に表示され、インテグレーテッドマネジメントログ（IML）にログエントリが記録されます。
ファームウェアアップデートを有効にするためにサーバーを再起動します。

追加情報:

ファームウェアをアップデートする場合は、リビジョン履歴を参照し、必要なバージョンまで1つずつアップデートしていきます。

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

Additional Information:

When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.

]]> このソフトウェアパッケージは、以下にリストされるサポートされるネットワークアダプターの次のファームウェアのバージョンを含みます：

NIC	EEPROM ID	OROMバージョン	NVMバージョン
Intel E810-XXVDA2 Ethernet 10/25Gb 2ポートSFP28アダプター	8001D8BA	1.3597.0	4.50

NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.5と示されます

]]> This software package contains the following firmware versions for the below listed supported network adapters:

NIC	EEPROM ID	OROM Version	NVM Version
Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter	8001D8BA	1.3597.0	4.50

In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.5

]]> 8086 159B 8086 0003 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_XXVDA2_SD_4p50_PLDMoMCTP_8001D8BA.fwpkg HPE_E810_XXVDA2_SD_4p50_PLDMoMCTP_8001D8BA.fwpkg file://./packages/HPE_E810_XXVDA2_SD_4p50_PLDMoMCTP_8001D8BA.fwpkg HPE_E810_XXVDA2_SD_4p50_PLDMoMCTP_8001D8BA.HPb HPE_E810_XXVDA2_SD_4p50_PLDMoMCTP_8001D8BA.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-XXVDA2 adapter 0 True HPE_E810_XXVDA2_SD_4p50_PLDMoMCTP_8001D8BA.HPb 360 1 True True True Firmware True a6b1a447-382a-5a4f-8086-159b80860003 4.50 FWPKG-v2 Firmware Bmc new Agentless Management Service (iLO 5, iLO 6) for Red Hat Enterprise Linux 9 Server Agentless Management Service (iLO 5, iLO 6) for Red Hat Enterprise Linux 9 Server ams_rhel9 ams_rhel9 Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server Lights Out Lights Out サーバ Server ソフトウェア - システムマネジメント Software - System Management 英語（US） English (US)

amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.

amsd provides information to the iLO 5 and iLO 6 service providing SNMP support

]]>

amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.

amsd provides information to the iLO 5 and iLO 6 service providing SNMP support

]]> システム管理者（root）としてログインし、RPMをハードディスク上のディレクトリにダウンロードした後、そのディレクトリに移動します。

パッケージをインストールするには、次のようにタイプします。
- rpm -Uvh amsd-.rpm
パッケージが正しくロードされているか、以下をタイプして確認します。
- systemctl status amsd
- systemctl status smad
以下のコマンドを実行してヘルプを参照してください。
- man amsd

]]> Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

To install the package type:
- rpm -Uvh amsd-<version>.rpm
To check whether the package is loaded properly type:
- systemctl status amsd
- systemctl status smad
Additional help is available by typing:
- man amsd

]]> 103C 3307 1590 00E4 103C 3306 1590 00E4 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要ありません。 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm amsd-3.6.0-1867.19.rhel9.x86_64.rpm amsd-3.6.0-1867.19.rhel9.x86_64.rpm file://./packages/amsd-3.6.0-1867.19.rhel9.x86_64.rpm ./etc/sysconfig/ahslog ./etc/sysconfig/amsd ./etc/sysconfig/amsd_rev ./etc/sysconfig/cpqFca ./etc/sysconfig/cpqFca_rev ./etc/sysconfig/cpqIde ./etc/sysconfig/cpqIde_rev ./etc/sysconfig/cpqScsi ./etc/sysconfig/cpqScsi_rev ./etc/sysconfig/cpqiScsi ./etc/sysconfig/mr_cpqScsi ./etc/sysconfig/mr_cpqScsi_rev ./etc/sysconfig/smad ./etc/sysconfig/smad_rev ./opt/amsd ./opt/amsd/amsd.license ./sbin/ahslog ./sbin/cpqiScsi ./usr/lib/.build-id ./usr/lib/.build-id/14 ./usr/lib/.build-id/14/05dc50c5903150cead949ea42ff9b5b49fb31c ./usr/lib/.build-id/14/05dc50c5903150cead949ea42ff9b5b49fb31c.1 ./usr/lib/.build-id/23 ./usr/lib/.build-id/23/d92dd763b433788ef464337add16659d40d154 ./usr/lib/.build-id/23/d92dd763b433788ef464337add16659d40d154.1 ./usr/lib/.build-id/24 ./usr/lib/.build-id/24/35eaf5208975812de21165d76d7f2c546b6043 ./usr/lib/.build-id/24/35eaf5208975812de21165d76d7f2c546b6043.1 ./usr/lib/.build-id/27 ./usr/lib/.build-id/27/cecc58446759e86f8bf1227ddee1005d4f3d98 ./usr/lib/.build-id/27/cecc58446759e86f8bf1227ddee1005d4f3d98.1 ./usr/lib/.build-id/48 ./usr/lib/.build-id/48/39a847bcd4cad4f9ab7e4bff2c31c2ae048628 ./usr/lib/.build-id/71 ./usr/lib/.build-id/71/20157fb70d6d37f25c54be8c82865459c51c73 ./usr/lib/.build-id/81 ./usr/lib/.build-id/81/68b53d27fc1a5da693e4a8d795ea9fa9f6d23c ./usr/lib/.build-id/81/68b53d27fc1a5da693e4a8d795ea9fa9f6d23c.1 ./usr/lib/.build-id/b7 ./usr/lib/.build-id/b7/8a11e1052b66c3a78002fa8afcd9f31c06743e ./usr/lib/.build-id/b7/8a11e1052b66c3a78002fa8afcd9f31c06743e.1 ./usr/lib/systemd/system/ahslog.service ./usr/lib/systemd/system/amsd.service ./usr/lib/systemd/system/amsd_rev.service ./usr/lib/systemd/system/cpqFca.service ./usr/lib/systemd/system/cpqFca_rev.service ./usr/lib/systemd/system/cpqIde.service ./usr/lib/systemd/system/cpqIde_rev.service ./usr/lib/systemd/system/cpqScsi.service ./usr/lib/systemd/system/cpqScsi_rev.service ./usr/lib/systemd/system/cpqiScsi.service ./usr/lib/systemd/system/mr_cpqScsi.service ./usr/lib/systemd/system/mr_cpqScsi_rev.service ./usr/lib/systemd/system/smad.service ./usr/lib/systemd/system/smad_rev.service ./usr/lib/udev/rules.d/81-cpqFca.rules ./usr/lib/udev/rules.d/81-cpqiScsi.rules ./usr/share/man/man8/ahslog.8.gz ./usr/share/man/man8/amsd.8.gz ./usr/share/man/man8/cpqFca.8.gz ./usr/share/man/man8/cpqIde.8.gz ./usr/share/man/man8/cpqScsi.8.gz ./usr/share/man/man8/cpqiScsi.8.gz ./usr/share/man/man8/mr_cpqScsi.8.gz ./usr/share/man/man8/smad.8.gz ./usr/share/smartupdate/amsd/component.xml ./sbin/amsd ./sbin/amsd_rev ./sbin/cpqFca ./sbin/cpqFca_rev ./sbin/cpqIde ./sbin/cpqIde_rev ./sbin/cpqScsi ./sbin/cpqScsi_rev ./sbin/mr_cpqScsi ./sbin/mr_cpqScsi_rev ./sbin/smad ./sbin/smad_rev new Mellanoxファームウェアパッケージ（FWPKG）- Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2ポートSFP28アダプターfor HPE Mellanox Firmware Package (FWPKG) - Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE Mellanoxファームウェアパッケージ（FWPKG）- Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2ポートSFP28アダプターfor HPE Mellanox Firmware Package (FWPKG) - Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 サーバオプション ServerOptions ネットワーク Networking サーバ Server ファームウェア - ネットワーク Firmware - Network 英語（US） English (US) FWPKGは、アダプターにフラッシュされたファームウェアバージョンが20.27.1016以降の場合にのみ機能し、iLO5ファームウェアバージョンは2.30以降である必要があります。

]]> FWPKG will work only if the firmware version flashed on the adapter is 20.27.1016 or later and iLO5 firmware version must be 2.30 or higher.

]]> 以下のいずれかの方法を使用してPLDMファームウェアをフラッシュします

iLOrestツールを使用したフラッシュ
Smart Update Manager（SUM）を使用したフラッシュ
iLO GUIからのフラッシュ

ローカルホストOSの例:
ilorest flashfwpkg

リモートの例:
ilorest flashfwpkg --url -u -p

2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。

USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。

通常の手順でファームウェアおよびソフトウェアをアップデートします。

アップデートを直ちに有効にするにはシステムを再起動してください。

3. iLO GUIからのフラッシュ

任意のブラウザーを使用してiLO IPを参照し、資格情報を使用してログインします
PLDMでサポートされているアダプターがサーバーに存在していることを確認します
iLO GUIに移動します -> 左側から[Firmware and OS software]をクリックします -> [Update Firmware]をクリックします -> [Choose File]をクリックして、サポートされているPLDMファイルを参照します -> [Flash]ボタンをクリックします。
アップデートステータスが上部に表示され、インテグレーテッドマネジメントログ（IML）にログエントリが記録されます。
ファームウェアアップデートを有効にするためにサーバーを再起動します。

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> このソフトウェアパッケージには、以下のファームウェアバージョンが含まれています。

Mellanox Ethernet専用アダプター	Firmware Version	PSID
Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2ポートSFP28アダプターfor HPE (P42044-B21)	26.41.1000	MT_0000000575

]]> This software package contains the following firmware versions:

Mellanox Ethernet Only Adapters	Firmware Version	PSID
Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21)	26.41.1000	MT_0000000575

]]> 15b3 101f 15b3 0012 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic 26_41_1000-MCX631102AS-ADA_Ax.pldm.fwpkg 26_41_1000-MCX631102AS-ADA_Ax.pldm.fwpkg file://./packages/26_41_1000-MCX631102AS-ADA_Ax.pldm.fwpkg 26_41_1000-MCX631102AS-ADA_Ax.pldm.signed 26_41_1000-MCX631102AS-ADA_Ax.pldm.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb MLX MCX631102 10/25GbE 2p SFP28 Adptr 0 True 26_41_1000-MCX631102AS-ADA_Ax.pldm.signed 360 1 True True True Firmware True a6b1a447-382a-5a4f-15b3-101f15b30012 26.41.1000 FWPKG-v2 Firmware Bmc new Mellanoxファームウェアパッケージ（FWPKG）- MCX623106AS-CDAT Ethernet 100Gb 2ポートQSFP56アダプターfor HPE Mellanox Firmware Package (FWPKG) for Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE Mellanoxファームウェアパッケージ（FWPKG）- MCX623106AS-CDAT Ethernet 100Gb 2ポートQSFP56アダプターfor HPE Mellanox Firmware Package (FWPKG) for Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 サーバオプション ServerOptions ネットワーク Networking サーバ Server ファームウェア - ネットワーク Firmware - Network 英語（US） English (US) FWPKGは、アダプターにフラッシュされたファームウェアバージョンが22.27.1016以降の場合にのみ機能し、iLO5ファームウェアバージョンは2.30以降である必要があります。

]]> FWPKG will work only if the firmware version flashed on the adapter is 22.27.1016 or later and iLO5 firmware version must be 2.30 or higher.

]]> 以下のいずれかの方法を使用してPLDMファームウェアをフラッシュします

iLOrestツールを使用したフラッシュ
Smart Update Manager（SUM）を使用したフラッシュ
iLO GUIからのフラッシュ

ローカルホストOSの例:
ilorest flashfwpkg

リモートの例:
ilorest flashfwpkg --url -u -p

2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。

USB Key Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。

通常の手順でファームウェアおよびソフトウェアをアップデートします。

アップデートを直ちに有効にするにはシステムを再起動してください。

3. iLO GUIからのフラッシュ

任意のブラウザーを使用してiLO IPを参照し、資格情報を使用してログインします
PLDMでサポートされているアダプターがサーバーに存在していることを確認します
iLO GUIに移動します -> 左側から[Firmware and OS software]をクリックします -> [Update Firmware]をクリックします -> [Choose File]をクリックして、サポートされているPLDMファイルを参照します -> [Flash]ボタンをクリックします。
アップデートステータスが上部に表示され、インテグレーテッドマネジメントログ（IML）にログエントリが記録されます。
ファームウェアアップデートを有効にするためにサーバーを再起動します。

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> このソフトウェアパッケージには、以下のファームウェアバージョンが含まれています。

Mellanox Ethernet専用アダプター	Firmware Version	PSID
Mellanox MCX623106AS-CDAT Ethernet 100Gb 2ポートQSFP56アダプターfor HPE（P25960-B21）	22.41.1000	MT_0000000437

]]> This software package contains the following firmware versions:

Mellanox Ethernet Only Adapters	Firmware Version	PSID
Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21)	22.41.1000	MT_0000000437

]]> 15B3 101D 15B3 0042 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic 22_41_1000-MCX623106AS-CDA_Ax.pldm.fwpkg 22_41_1000-MCX623106AS-CDA_Ax.pldm.fwpkg file://./packages/22_41_1000-MCX623106AS-CDA_Ax.pldm.fwpkg 22_41_1000-MCX623106AS-CDA_Ax.pldm.signed 22_41_1000-MCX623106AS-CDA_Ax.pldm.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb HPE Ethernet 100Gb 2-port QSFP56 MCX623106AS-CDAT Adapter 0 True 22_41_1000-MCX623106AS-CDA_Ax.pldm.signed 360 1 True True True Firmware True a6b1a447-382a-5a4f-15b3-101d15b30042 22.41.1000 FWPKG-v2 Firmware Bmc new Mellanoxファームウェアパッケージ（FWPKG）- Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2ポートSFP28 OCP3アダプターfor HPE Mellanox Firmware Package (FWPKG) - Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE Mellanoxファームウェアパッケージ（FWPKG）- Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2ポートSFP28 OCP3アダプターfor HPE Mellanox Firmware Package (FWPKG) - Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE Hewlett Packard Enterprise Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 サーバオプション ServerOptions ネットワーク Networking サーバ Server ファームウェア - ネットワーク Firmware - Network 英語（US） English (US) FWPKGは、アダプターにフラッシュされたファームウェアバージョンが20.27.1016以降の場合にのみ機能し、iLO5ファームウェアバージョンは2.30以降である必要があります。

]]> FWPKG will work only if the firmware version flashed on the adapter is 20.27.1016 or later and iLO5 firmware version must be 2.30 or higher.

]]> 以下のいずれかの方法を使用してPLDMファームウェアをフラッシュします

iLOrestツールを使用したフラッシュ
Smart Update Manager（SUM）を使用したフラッシュ
iLO GUIからのフラッシュ

ローカルホストOSの例:
ilorest flashfwpkg

リモートの例:
ilorest flashfwpkg --url -u -p

2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。

USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。

通常の手順でファームウェアおよびソフトウェアをアップデートします。

アップデートを直ちに有効にするにはシステムを再起動してください。

3. iLO GUIからのフラッシュ

任意のブラウザーを使用してiLO IPを参照し、資格情報を使用してログインします
PLDMでサポートされているアダプターがサーバーに存在していることを確認します
iLO GUIに移動します -> 左側から[Firmware and OS software]をクリックします -> [Update Firmware]をクリックします -> [Choose File]をクリックして、サポートされているPLDMファイルを参照します -> [Flash]ボタンをクリックします。
アップデートステータスが上部に表示され、インテグレーテッドマネジメントログ（IML）にログエントリが記録されます。
ファームウェアアップデートを有効にするためにサーバーを再起動します。

]]> Flash the PLDM firmware using any below methods

Flash using iLOrest tool
Flash using Smart Update Manager (SUM).
Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

Browse iLO IP using any browser and login using the credential
Make sure the PLDM supported adapter is present in the server
Go to iLO GUI -> Click on "Firmware and OS software" from left side -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button.
Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML)
Reboot the server for the firmware update to take effect.

]]> このソフトウェアパッケージには、以下のファームウェアバージョンが含まれています。

Mellanox Ethernet専用アダプター	Firmware Version	PSID
Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2ポートSFP28 OCP3アダプターfor HPE (P42041-B21)	26.41.1000	MT_0000000551

]]> This software package contains the following firmware versions:

Mellanox Ethernet Only Adapters	Firmware Version	PSID
Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P42041-B21)	26.41.1000	MT_0000000551

]]> 15b3 101f 15b3 0007 アップデートの効果とハードウェアの安定を得るために、インストール後の再起動は必要です。 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic 26_41_1000-MCX631432AS-ADA_Ax.pldm.fwpkg 26_41_1000-MCX631432AS-ADA_Ax.pldm.fwpkg file://./packages/26_41_1000-MCX631432AS-ADA_Ax.pldm.fwpkg 26_41_1000-MCX631432AS-ADA_Ax.pldm.signed 26_41_1000-MCX631432AS-ADA_Ax.pldm.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb MLX MCX6314 10/25GbE 2p SFP28 OCP3 Adptr 0 True 26_41_1000-MCX631432AS-ADA_Ax.pldm.signed 360 1 True True True Firmware True a6b1a447-382a-5a4f-15b3-101f15b30007 26.41.1000 FWPKG-v2 Firmware Bmc