new Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

  1. Flash using iLOrest tool 
  2. Flash using Smart Update Manager (SUM).
  3. Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg> 

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

  • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

  • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

  • Browse iLO IP using any browser and login using the credential 
  • Make sure the PLDM supported adapter is present in the server
  • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
  • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
  • Reboot the server for the firmware update to take effect.

Additional Information:

  • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
]]> This software package contains the following firmware versions for the below listed supported network adapters:

NIC EEPROM ID OROM Version NVM Version
Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 8001E8AF 1.3682.0 4.60

In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.6

]]> 8086 1593 8086 000C Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_XXV4_OCP_4p60_NCSIwPLDMoMCTP_8001E8AF.fwpkg HPE_E810_XXV4_OCP_4p60_NCSIwPLDMoMCTP_8001E8AF.fwpkg file://./packages/HPE_E810_XXV4_OCP_4p60_NCSIwPLDMoMCTP_8001E8AF.fwpkg HPE_E810_XXV4_OCP_4p60_NCSIwPLDMoMCTP_8001E8AF.HPb HPE_E810_XXV4_OCP_4p60_NCSIwPLDMoMCTP_8001E8AF.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-XXVDA4 OCP3 adapter 0 True HPE_E810_XXV4_OCP_4p60_NCSIwPLDMoMCTP_8001E8AF.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-8086-15938086000c 4.60 FWPKG-v2 Firmware Bmc new Broadcom Firmware Package for BCM5750x adapters Broadcom Firmware Package for BCM5750x adapters Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Microsoft Windows Server 2025 ServerOptions Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

  1. Flash using iLOrest tool 
  2. Flash using Smart Update Manager (SUM).
  3. Flash from iLO GUI

1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

localhost OS example:
ilorest flashfwpkg <file_name.fwpkg> 

remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

  • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

  • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

Update the firmware and software in the usual manner.

Reboot your system for the update to take effect immediately

3. Flash from iLO GUI

  • Browse iLO IP using any browser and login using the credential 
  • Make sure the PLDM supported adapter is present in the server
  • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
  • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
  • Reboot the server for the firmware update to take effect.

Additional Information:

  • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
]]>
  • This software package contains NVM Image version 231.1.162.1 with the following firmware versions:
    NIC Bootcode Version NCSI Version MBA Version UEFI Version RoCE Version
    Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE 231.0.153.0
         		 231.0.153.0
         		 231.0.159.0
         		 231.0.159.0
         		 231.0.153.0
     
    Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE 

    •  

    • Recommend to upgrade to the NVM Image version 226.1.107.0 firmware first for this firmware package, please refer to the following link.

    https://www.hpe.com/global/swpublishing/MTX-99a59d3b36404166b10a37a3b3

     

    ]]>         14e4 1801 14e4 1599 14e4 1801 14e4 1598 14e4 1804 14e4 1599 14e4 1804 14e4 1598 14E4 1751 14E4 1599 14E4 1751 14E4 1598 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic bcm231.1.162.1_Thor.pup.fwpkg bcm231.1.162.1_Thor.pup.fwpkg file://./packages/bcm231.1.162.1_Thor.pup.fwpkg bcm231.1.162.1_Thor.pup.HPb bcm231.1.162.1_Thor.pup.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Broadcom NetXtreme-E BCM5750x adapters 0 True bcm231.1.162.1_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-175114e41598 231.1.162.1 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm231.1.162.1_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180114e41598 231.1.162.1 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm231.1.162.1_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180414e41598 231.1.162.1 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm231.1.162.1_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-175114e41599 231.1.162.1 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm231.1.162.1_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180114e41599 231.1.162.1 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm231.1.162.1_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180414e41599 231.1.162.1 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm231.1.162.1_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-175014e4159a 231.1.162.1 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm231.1.162.1_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180214e4159a 231.1.162.1 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm231.1.162.1_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180514e4159a 231.1.162.1 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm231.1.162.1_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-175014e4159b 231.1.162.1 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm231.1.162.1_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180214e4159b 231.1.162.1 Broadcom NetXtreme-E BCM5750x adapters 0 True bcm231.1.162.1_Thor.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-180514e4159b 231.1.162.1 226.1.107.0 FWPKG-v2 ComboFirmware Bmc     new iLO 6 Channel Interface Driver for Microsoft Windows Server 2025 iLO 6 Channel Interface Driver Hewlett Packard Enterprise Microsoft Windows Server 2025 Lights Out Server Driver - System Management English (US) Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         103c 3307 1590 00E4 cpqsetup.exe Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 600 %systemroot%\system32\drivers cp063547.exe cp063547.exe file://./packages/cp063547.exe cp063547.xml cpqsetup.exe generic.dll install.xml necheschif.cat necheschif.inf necheschif.sys     changed HPE Broadcom NetXtreme-E Drivers for SUSE Linux Enterprise Server 15 HPE Broadcom NetXtreme-E Drivers for SUSE Linux Enterprise Server 15 SUSE Linux Enterprise Server 15 ServerOptions Networking Server Driver - Network English (US) This product is required to unload inbox NIC driver before install OOB driver if user want OOB driver to take effect immediately. Otherwise, OOB driver will take effect after system reboot under inbox driver is loaded.

    ]]>         The binary RPM package(s) provided by this product are pre-compiled kernel module drivers built specifically for the default inbox kernel (stock kernel) that ships with the Linux distribution.  HPE has tested and approved these pre-compiled kernel module RPMs for use with the specified kernel. 

    These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.

    To find the location of the driver source RPM, execute the following command for the kernel module driver RPM:  localhost> rpm -qpi <kernel module driver name>.rpm

    ]]>         14E4 16D7 1590 0211 14E4 16D7 1590 020E 14E4 16D7 14E4 1597 14E4 16D7 14E4 1596 14E4 16D8 1590 0212 14E4 16D8 1590 020C 14E4 16D7 1590 02C3 14E4 16D7 1590 02C5 14E4 16D8 14E4 1593 14E4 16D8 14E4 1592 14E4 16D6 14E4 1595 14E4 16D6 14E4 1594 14E4 16EE 1590 0212 14E4 16EE 1590 020C 14E4 16EC 1590 0211 14E4 16EC 1590 020E 14E4 16EE 14E4 1593 14E4 16EE 14E4 1592 14E4 16EF 1590 0212 14E4 16EF 1590 020C 14E4 16ED 1590 0211 14E4 16ED 1590 020E 14E4 16EF 14E4 1593 14E4 16EF 14E4 1592 14E4 16EB 14E4 1595 14E4 16EB 14E4 1594 14E4 16ED 14E4 1597 14E4 16ED 14E4 1596 14E4 16DE 14E4 1595 14E4 16DE 14E4 1594 14E4 16EC 14E4 1597 14E4 16EC 14E4 1596 14E4 16DC 1590 16D8 14E4 16DC 1590 16D7 14E4 16C5 0000 0000 14E4 16C5 1590 020C 14E4 16C5 1590 0211 14E4 16C5 1590 020E 14E4 16C1 1590 16D8 14E4 16BD 0000 0000 14E4 16BD 1590 020C 14E4 16BD 1590 0211 14E4 16BD 1590 020E 14E4 16EC 1590 02C3 14E4 16EC 1590 02C5 14E4 16ED 1590 02C3 14E4 16ED 1590 02C5 14E4 16DC 1590 02C3 14E4 16DC 1590 02C5 14E4 16C5 1590 02C3 14E4 16C5 1590 02C5 14E4 16C1 1590 02C3 14E4 16C1 1590 02C5 14E4 16BD 1590 02C3 14E4 16BD 1590 02C5 14e4 1801 14e4 1599 14e4 1801 14e4 1598 14e4 1804 14e4 1599 14e4 1804 14e4 1598 14E4 1751 14E4 1599 14E4 1751 14E4 1598 14E4 16C1 1590 16D7 Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot. 0 software:rpm software:rpm bnxt_en-kmp-default-1.10.3_k6.4.0_150600.21-231.0.162.0.sles15sp6.x86_64.rpm bnxt_en-kmp-default-1.10.3_k5.14.21_150500.53-231.0.162.0.sles15sp5.x86_64.rpm file://./packages/bnxt_en-kmp-default-1.10.3_k5.14.21_150500.53-231.0.162.0.sles15sp5.x86_64.rpm ./lib/modules/5.14.21-150500.53-default ./lib/modules/5.14.21-150500.53-default/updates ./lib/modules/5.14.21-150500.53-default/updates/bnxt_en.ko ./lib/modules/5.14.21-150500.53-default/updates/drivers ./lib/modules/5.14.21-150500.53-default/updates/drivers/infiniband ./lib/modules/5.14.21-150500.53-default/updates/drivers/infiniband/hw ./lib/modules/5.14.21-150500.53-default/updates/drivers/infiniband/hw/bnxt_re ./lib/modules/5.14.21-150500.53-default/updates/drivers/infiniband/hw/bnxt_re/bnxt_re.ko ./usr/share/smartupdate/bnxt_en-kmp-default/component.xml bnxt_en-kmp-default-1.10.3_k6.4.0_150600.21-231.0.162.0.sles15sp6.x86_64.rpm file://./packages/bnxt_en-kmp-default-1.10.3_k6.4.0_150600.21-231.0.162.0.sles15sp6.x86_64.rpm ./lib/modules/6.4.0-150600.21-default ./lib/modules/6.4.0-150600.21-default/updates ./lib/modules/6.4.0-150600.21-default/updates/bnxt_en.ko ./lib/modules/6.4.0-150600.21-default/updates/drivers ./lib/modules/6.4.0-150600.21-default/updates/drivers/infiniband ./lib/modules/6.4.0-150600.21-default/updates/drivers/infiniband/hw ./lib/modules/6.4.0-150600.21-default/updates/drivers/infiniband/hw/bnxt_re ./lib/modules/6.4.0-150600.21-default/updates/drivers/infiniband/hw/bnxt_re/bnxt_re.ko ./usr/share/smartupdate/bnxt_en-kmp-default/component.xml     new Agentless Management Service (iLO 5, iLO 6) for Red Hat Enterprise Linux 9 Server ams_rhel9 Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server Lights Out Server Software - System Management English (US)

  • amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.

  • amsd provides information to the iLO 5 and iLO 6 service providing SNMP support

    • ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    • To install the package type:
      • rpm -Uvh amsd-<version>.rpm
    • To check whether the package is loaded properly type:
      • systemctl status amsd
      • systemctl status smad
    • Additional help is available by typing:
      • man amsd
    ]]>         103C 3307 1590 00E4 103C 3306 1590 00E4 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm amsd-3.8.0-1869.3.rhel9.x86_64.rpm amsd-3.8.0-1869.3.rhel9.x86_64.rpm file://./packages/amsd-3.8.0-1869.3.rhel9.x86_64.rpm ./etc/sysconfig/ahslog ./etc/sysconfig/amsd ./etc/sysconfig/amsd_rev ./etc/sysconfig/cpqFca ./etc/sysconfig/cpqFca_rev ./etc/sysconfig/cpqIde ./etc/sysconfig/cpqIde_rev ./etc/sysconfig/cpqScsi ./etc/sysconfig/cpqScsi_rev ./etc/sysconfig/cpqiScsi ./etc/sysconfig/mr_cpqScsi ./etc/sysconfig/mr_cpqScsi_rev ./etc/sysconfig/smad ./etc/sysconfig/smad_rev ./opt/amsd ./opt/amsd/amsd.license ./sbin/ahslog ./sbin/cpqiScsi ./usr/lib/.build-id ./usr/lib/.build-id/0c ./usr/lib/.build-id/0c/a4dc2dd04aa383d4eb56d9c2f842ec08f17d06 ./usr/lib/.build-id/10 ./usr/lib/.build-id/10/c775d63a4b6f461c54e0d69b8235480841a607 ./usr/lib/.build-id/10/c775d63a4b6f461c54e0d69b8235480841a607.1 ./usr/lib/.build-id/27 ./usr/lib/.build-id/27/401460dbcdf73df9e31611ecc18d787ea2248b ./usr/lib/.build-id/27/401460dbcdf73df9e31611ecc18d787ea2248b.1 ./usr/lib/.build-id/80 ./usr/lib/.build-id/80/a79bb530ceea2917c54e29b5d5907a86957603 ./usr/lib/.build-id/80/a79bb530ceea2917c54e29b5d5907a86957603.1 ./usr/lib/.build-id/c7 ./usr/lib/.build-id/c7/cafa4a2997111c86dc34205f1196f816eff8c8 ./usr/lib/.build-id/c7/cafa4a2997111c86dc34205f1196f816eff8c8.1 ./usr/lib/.build-id/dd ./usr/lib/.build-id/dd/2154361775d5e7c967fcad4c06cc0e26fef47f ./usr/lib/.build-id/dd/2154361775d5e7c967fcad4c06cc0e26fef47f.1 ./usr/lib/.build-id/f5 ./usr/lib/.build-id/f5/969478ce50b95f06a793a95fe4869cc6983bae ./usr/lib/.build-id/f6 ./usr/lib/.build-id/f6/cd8706415c978d8514d036f202944a98196f7a ./usr/lib/.build-id/f6/cd8706415c978d8514d036f202944a98196f7a.1 ./usr/lib/systemd/system/ahslog.service ./usr/lib/systemd/system/amsd.service ./usr/lib/systemd/system/amsd_rev.service ./usr/lib/systemd/system/cpqFca.service ./usr/lib/systemd/system/cpqFca_rev.service ./usr/lib/systemd/system/cpqIde.service ./usr/lib/systemd/system/cpqIde_rev.service ./usr/lib/systemd/system/cpqScsi.service ./usr/lib/systemd/system/cpqScsi_rev.service ./usr/lib/systemd/system/cpqiScsi.service ./usr/lib/systemd/system/mr_cpqScsi.service ./usr/lib/systemd/system/mr_cpqScsi_rev.service ./usr/lib/systemd/system/smad.service ./usr/lib/systemd/system/smad_rev.service ./usr/lib/udev/rules.d/81-cpqFca.rules ./usr/lib/udev/rules.d/81-cpqiScsi.rules ./usr/share/man/man8/ahslog.8.gz ./usr/share/man/man8/amsd.8.gz ./usr/share/man/man8/cpqFca.8.gz ./usr/share/man/man8/cpqIde.8.gz ./usr/share/man/man8/cpqScsi.8.gz ./usr/share/man/man8/cpqiScsi.8.gz ./usr/share/man/man8/mr_cpqScsi.8.gz ./usr/share/man/man8/smad.8.gz ./usr/share/smartupdate/amsd/component.xml ./sbin/amsd ./sbin/amsd_rev ./sbin/cpqFca ./sbin/cpqFca_rev ./sbin/cpqIde ./sbin/cpqIde_rev ./sbin/cpqScsi ./sbin/cpqScsi_rev ./sbin/mr_cpqScsi ./sbin/mr_cpqScsi_rev ./sbin/smad ./sbin/smad_rev     new Intel iavf Driver for Windows Server 2025 Intel iavf Driver for Windows Server 2025 Hewlett Packard Enterprise Microsoft Windows Server 2025 Networking Server Driver - Network English (US),Japanese This driver requires host driver version the following:

    • Intel i40ea Driver version 1.19.267.0 or later.
    • Intel icea Driver version 1.15.316.0 or later.
    ]]>

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> 8086 1889 8086 0001 8086 1571 8086 0001 8086 154c 8086 0000 8086 1889 8086 0000 8086 1571 0000 0000 8086 37CD 8086 0001 cpqsetup.exe Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 300 %systemroot%\System32\DriverStore\FireRepository\iavf.inf_amd64_7854544ffd52cc6a cp064593.exe cp064593.exe file://./packages/cp064593.exe cp064593.xml cpqsetup.exe cp_data.xml iavf.cat iavf.inf iavf.sys iavfmsg.dll install.xml manifest_iavf.man nicdrvr.dll new Universal Firmware Package for Drives - VK000960KYDPT, VK001920KYDPU, VK003840KYDPV and VK007680KYDQA Universal Firmware Package for Drives - VK000960KYDPT, VK001920KYDPU, VK003840KYDPV and VK007680KYDQA Hewlett Packard Enterprise Microsoft Windows Server 2022 SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server Storage Firmware - PCIe NVMe Storage Disk English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         Release Version and/or Date:
         HPK4
    Last Recommended or Critical Version:
         None
    Previous Version of Firmware:
         None
    Enhancements/New Features:
         None
    Problems Fixed:
        Firmware maintenance release of Samsung U.3 NVMe SSD with HPK4.
    Known Issues:
         None

    ]]>         VK000960KYDPT VK001920KYDPU VK003840KYDPV VK007680KYDQA Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme Samsung_PM9A3_PM9A3U3HPK4.fwpkg Samsung_PM9A3_PM9A3U3HPK4.fwpkg file://./packages/Samsung_PM9A3_PM9A3U3HPK4.fwpkg payload.json Samsung_PM9A3_PM9A3U3HPK4.HPb Samsung_PM9A3_PM9A3U3HPK4.xml f6de0320-2e0f-489a-b238-6dd8ae7c3811 Samsung-PM9A3-NVMe 0 True Samsung_PM9A3_PM9A3U3HPK4.HPb 120 1 True True True Firmware True 562340a5-304b-3030-3936-304b59445054 HPK4 Samsung-PM9A3-NVMe 0 True Samsung_PM9A3_PM9A3U3HPK4.HPb 120 1 True True True Firmware True 562340a5-304b-3130-3932-304b59445055 HPK4 Samsung-PM9A3-NVMe 0 True Samsung_PM9A3_PM9A3U3HPK4.HPb 120 1 True True True Firmware True 562340a5-304b-3330-3834-304b59445056 HPK4 Samsung-PM9A3-NVMe 0 True Samsung_PM9A3_PM9A3U3HPK4.HPb 120 1 True True True Firmware True 562340a5-304b-3730-3638-304b59445141 HPK4 FWPKG-v2 ComboFirmware Bmc Uefi     new Universal Firmware Package for Drives - VO000960KXNXD, VO001920KXNZQ, VO003840KXNZR, VO007680KXNZT, MO000800KXNXH, MO001600KXNZV, MO003200KXPAA and MO006400KXPAB Universal Firmware Package for Drives - VO000960KXNXD, VO001920KXNZQ, VO003840KXNZR, VO007680KXNZT, MO000800KXNXH, MO001600KXNZV, MO003200KXPAA and MO006400KXPAB Hewlett Packard Enterprise Microsoft Windows Server 2022 SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server Storage Firmware - PCIe NVMe Storage Disk English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         Release Version and/or Date:
         HPS3
    Last Recommended or Critical Version:
         HPS1
    Previous Version of Firmware:
         HPS1
    Enhancements/New Features:
          None

    Problems Fixed:
        - Improvements to our out-of-band message handling to ensure robust device management capabilities
        - Changes to improve our PCIe link compatibility as well as device reliability

    Known Issues:
         None

    ]]>         VO001920KXNZQ VO003840KXNZR VO007680KXNZT MO000800KXNXH MO001600KXNZV MO003200KXPAA MO006400KXPAB VO000960KXNXD Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme Micron_7450_Micron_7450_M7450ALLHPS3.fwpkg Micron_7450_Micron_7450_M7450ALLHPS3.fwpkg file://./packages/Micron_7450_Micron_7450_M7450ALLHPS3.fwpkg Micron_7450_Micron_7450_M7450ALLHPS3.HPb Micron_7450_Micron_7450_M7450ALLHPS3.xml payload.json f6de0320-2e0f-489a-b238-6dd8ae7c3811 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 4d2340a5-304f-3030-3830-304b584e5848 HPS3 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 4d2340a5-304f-3130-3630-304b584e5a56 HPS3 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 4d2340a5-304f-3330-3230-304b58504141 HPS3 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 4d2340a5-304f-3630-3430-304b58504142 HPS3 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 562340a5-304f-3030-3936-304b584e5844 HPS3 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 562340a5-304f-3130-3932-304b584e5a51 HPS3 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 562340a5-304f-3330-3834-304b584e5a52 HPS3 Micron-7450-NVMe 0 True Micron_7450_Micron_7450_M7450ALLHPS3.HPb 120 1 True True True Firmware True 562340a5-304f-3730-3638-304b584e5a54 HPS3 FWPKG-v2 ComboFirmware Bmc Uefi     new ROM Flash Firmware Package - System ROM for HPE ProLiant Compute DL380a Gen12 (U70) HPE ProLiant DL380a Gen12 (U70) Servers Hewlett Packard Enterprise Server BIOS - System ROM English (US) To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>


    This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately.

    ]]>         cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 300 firmware:system U70_1.18_12_06_2024.fwpkg U70_1.18_12_06_2024.fwpkg file://./packages/U70_1.18_12_06_2024.fwpkg payload.json U70_1.18_12_06_2024.signed.flash U70_1.18_12_06_2024.xml aa148d2e-6e09-453e-bc6f-63baa5f5ccc4 System BIOS - U70 0 True U70_1.18_12_06_2024.signed.flash 300 1 False True True False Firmware True 00000000-0000-0000-0000-000000000277 v1.18 (12/06/2024) FWPKG-v2 Firmware Bmc     new Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK Adapter Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK Adapter Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.

    Additional Information:

    • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
    ]]>         This software package contains the following firmware versions for the below listed supported network adapters:

    NIC EEPROM ID OROM Version NVM Version
    Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK Adapter for HPE 8001E8AF 1.3682.0 4.60

    In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.6

    ]]>         8086 1593 8086 000E Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_XXV4T_O_SEC_4p60_PLDMoMCTP_8001E8B4.fwpkg HPE_E810_XXV4T_O_SEC_4p60_PLDMoMCTP_8001E8B4.fwpkg file://./packages/HPE_E810_XXV4T_O_SEC_4p60_PLDMoMCTP_8001E8B4.fwpkg HPE_E810_XXV4T_O_SEC_4p60_PLDMoMCTP_8001E8B4.HPb HPE_E810_XXV4T_O_SEC_4p60_PLDMoMCTP_8001E8B4.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-XXVDA4T adapter 0 True HPE_E810_XXV4T_O_SEC_4p60_PLDMoMCTP_8001E8B4.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-8086-15938086000e 4.60 FWPKG-v2 Firmware Bmc     new Mellanox Firmware Package (FWPKG) - Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE Mellanox Firmware Package (FWPKG) - Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Microsoft Windows Server 2025 ServerOptions Networking Server Firmware - Network English (US) FWPKG will work only if the firmware version flashed on the adapter is 20.27.1016 or later and iLO5 firmware version must be 2.30 or higher.

    ]]>         Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         This software package contains the following firmware versions:

    Mellanox Ethernet Only Adapters Firmware Version PSID
    Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE  (P42041-B21) 26.42.1000 MT_0000000551

     

    ]]>         15b3 101f 15b3 0007 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic 26_42_1000-MCX631432AS-ADA_Ax.pldm.fwpkg 26_42_1000-MCX631432AS-ADA_Ax.pldm.fwpkg file://./packages/26_42_1000-MCX631432AS-ADA_Ax.pldm.fwpkg 26_42_1000-MCX631432AS-ADA_Ax.pldm.signed 26_42_1000-MCX631432AS-ADA_Ax.pldm.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb MLX MCX6314 10/25GbE 2p SFP28 OCP3 Adptr 0 True 26_42_1000-MCX631432AS-ADA_Ax.pldm.signed 360 1 True True False True Firmware True a6b1a447-382a-5a4f-15b3-101f15b30007 26.42.1000 FWPKG-v2 Firmware Bmc     new Intel icea Driver for Microsoft Windows Server 2022 Intel icea Driver for Microsoft Windows Server 2022 Hewlett Packard Enterprise Microsoft Windows Server 2022 Networking Server Driver - Network English (US),Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> 8086 1592 8086 0002 8086 1592 8086 0006 8086 159B 8086 0003 8086 159B 8086 0005 8086 1593 8086 0005 8086 1592 8086 000E 8086 1593 8086 000C cpqsetup.exe Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 360 %systemroot%\system32\DriverStore\FileRepository\icea.inf_amd64_0d313568beecbfb3 cp063717.exe cp063717.exe file://./packages/cp063717.exe cp063717.xml cpqsetup.exe cp_data.xml icea.cat icea.inf icea.sys iceamsg.dll install.xml manifest_icea.man nicdrvr.dll new Online ROM Flash Firmware Package - HPE Integrated Lights-Out 6 HPE Integrated Lights-Out 6 Hewlett Packard Enterprise Lights Out Server Firmware - Lights-Out Management English (US) Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities
    for best performance:

    • RESTful Interface Tool (iLOREST) 5.2.0
    • HPQLOCFG v6.0.0
    • Lights-Out XML Scripting Sample bundle 6.00.0
    • HPONCFG Windows 6.0.0
    • HPONCFG Linux 6.0.0(A)
    • LOCFG v6.00.0 or later
    • HPLOMIG 6.0.0
    • Schema extender 6.1.0
    • Snap-in (x86) 6.0.0
    • Snap-in (x64) 6.0.0

    NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.

     

    NOTE: Below Points are applicable only for Intel and AMD

    •    Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
    •    The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
    •    The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).

     

    Supported Utilities for RL300

    Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
    •    RESTful Interface Tool (iLOREST) 4.8.0.0

    NOTE: Below Points are applicable only for RL300

    • Updated utilities and system libraries are required to support the iLO in High Security and Production Modes.
    • CNSA and FIPS mode are currently not supported. See the iLO 6 User Guide for the steps on how to disable FIPS and CNSA mode.
    • iLO Amplifier Pack, HPE GreenLake Compute Ops Management (COM), HPE OneView, and HPE Infosight for Servers do not support HPE ProLiant RL300 Gen 11 platform.
    • RedHat Enterprise Linux 8.6 is supported on HPE ProLiant RL300 servers

        For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide

    ]]>     To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>

    This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    ]]>          

    iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:

    http://www.hpe.com/info/ilo-docs

    Select your lights-out product, then support & documents, then manuals.

    • Check the online help for additional information about how to use features. 
      Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.
    ]]>         2f317b9d-c9e3-4d76-bff6-b9d0d085a952 103c 3307 1590 00E4 103c 3306 1590 00E4 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:ilo6 ilo6_166.fwpkg ilo6_166.fwpkg file://./packages/ilo6_166.fwpkg ilo6_166.bin ilo6_166.xml payload.json readme.txt 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 iLO 6 120 True ilo6_166.bin 600 1 False False False False Firmware True e6d3c844-14a6-4f1f-84a3-c06013910406 1.66 iLO 6 120 True ilo6_166.bin 600 1 False False False False Firmware True e6d3c844-14a6-4f1f-84a3-c06013910306 1.66 iLO 6 120 True ilo6_166.bin 600 1 False False False False Firmware True e6d3c844-14a6-4f1f-84a3-c06013910206 1.66 iLO 6 120 True ilo6_166.bin 600 1 False False False False Firmware True e6d3c844-14a6-4f1f-84a3-c06013910106 1.66 iLO 6 120 True ilo6_166.bin 600 1 False False False False Firmware True e6d3c844-14a6-4f1f-84a3-c06013910006 1.66 FWPKG-v2 ComboFirmware Bmc     new HPE Mellanox RoCE (RDMA over Converged Ethernet) ConnectX-4, ConnectX-5, ConnectX-6 and ConnectX-7 Driver for Red Hat Enterprise Linux 9 Update 4 (x86_64) HPE Mellanox RoCE ConnectX-4, ConnectX-5, ConnectX-6 and ConnectX-7 Driver for Red Hat Enterprise Linux 9 Update 4 (x86_64) Hewlett-Packard Development Company, L.P. Red Hat Enterprise Linux 9 Server ServerOptions Networking Server Driver - Network English (US) Login as root, download the RPM to a directory on your hard drive and change to that directory.

    Note: Irrespective of the kernel version or type used, the "mlnx-ofa_kernel-24.04" RPM must be installed to enable the user space functionality for RoCE. The RoCE user space library RPM (mlnx-ofa_kernel) may conflict with the OpenMPI RPMs included with the OS distribution.This is a known behavior. Insure that the OpenMPI RPMs from the Linux distribution are not installed on the target node prior to the installation of "mlnx-ofa_kernel". If already installed, uninstall any OpenMPI distribution RPMs before installing HPE Mellanox RoCE driver packages.

    To install or upgrade the driver:
    If using kernel version 5.14.0-427.13.1.el9_4.x86_64 or any future errata:

    # rpm -Uvh mlnx-ofa_kernel-24.04-OFED.24.04.0.6.6.1.rhel9u4.x86_64.rpm kmod-mlnx-ofa_kernel-24.04-OFED.24.04.0.6.6.1.rhel9u4.x86_64.rpm

    Setup is now complete. Reboot your computer for the driver to take effect.

    ]]>         This driver package supports the following adapters:

    • ConnectX4:
      • HPE InfiniBand EDR/Ethernet 100Gb 2-port 840QSFP28 Adapter (825111-B21 / 825111-H21)
      • HPE InfiniBand EDR/Ethernet 100Gb 1-port 840QSFP28 Adapter (825110-B21 / 825110-H21)
         
    • ConnectX4 Lx:
      • HPE Ethernet 25Gb 2-port 640SFP28 Adapter (817753-B21)
      • HPE Ethernet 25Gb 2-port 640FLR-SFP28 Adapter (817749-B21) 
      • HPE Ethernet 10Gb 2-port 548SFP+ Adapter (P11338-B21)
      • HPE Ethernet 10Gb 2-port SFP+ MCX4121A-XCHT Adapter (P21930-B21) 
      • HPE 10/25GbE 2p SFP28 MCX4621 OCP3 Adapter (P11341-B21) 
         
    • ConnectX5:
      • HPE Ethernet 100Gb 2-port QSFP28 MCX516A-CCHT Adapter (P21927-B21)
      • HPE Ethernet 100Gb 1-port QSFP28 PCIe3 x16 MCX515A-CCAT Adapter (P31246-B21 / P31246-H21)
      • HPE Ethernet 100Gb 1-port 842QSFP28 Adapter (874253-B21)
      • Mellanox MCX562A-ACAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P10112-B21)
      • Mellanox MCX512F-ACHT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P13188-B21)
      • HPE InfiniBand FDR/Ethernet 40/50Gb 2-port 547FLR-QSFP Adapter (879482-B21)
      • HPE InfiniBand EDR/Ethernet 100Gb 2-port 841QSFP28 Adapter (872726-B21 / 872726-H21)
         
    • ConnectX6:
      • HPE InfiniBand HDR/Ethernet 200Gb 1-port 940QSFP56 x16 Adapter (P06154-B21 / P06154-H21)
      • HPE InfiniBand HDR100/Ethernet 100Gb 1-port 940QSFP56 x16 Adapter (P06250-B21/ P06250-H21)
      • HPE InfiniBand HDR100/Ethernet 100Gb 2-port 940QSFP56 x16 Adapter (P06251-B21 / P06251-H21)
      • HPE InfiniBand HDR100/Ethernet 100Gb 1-port QSFP56 PCIe4 x16 MCX653105A-ECAT Adapter (P23665-B21 / P23665-H21)
      • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe4 x16 MCX653105A-HDAT Adapter (P23664-B21 / P23664-H21)
      • HPE InfiniBand HDR100/Ethernet 100Gb 2-port QSFP56 PCIe4 x16 MCX653106A-ECAT Adapter (P23666-B21 / P23666-H21)
      • HPE InfiniBand HDR/Ethernet 200Gb 2-port QSFP56 PCIe4 x16 OCP3 MCX653436A-HDAI Adapter (P31348-B21 / P31348-H21)
      • HPE InfiniBand HDR/Ethernet 200Gb 1-port QSFP56 PCIe4 x16 OCP3 MCX653435A-HDAI Adapter (P31323-B21 / P31323-H21)
      • HPE InfiniBand HDR/Ethernet 200Gb 2-port QSFP56 PCIe4 x16 MCX653106A-HDAT Adapter (P31324-B21 / P31324-H21)
    • ConnectX6 Dx:
      • Mellanox MCX623105AS-VDAT Ethernet 200Gb 1-port QSFP56 Adapter for HPE (P10180-B21)
      • Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21)
        ​​​​​​​
    • ConnectX6 Lx:
      • Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21)
      • Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P42041-B21)
    • ConnectX7:
      • HPE InfiniBand NDR200/Ethernet 200GbE 2-port QSFP112 PCIe5 x16 MCX755106AC-HEAT Adapter (P65333-B21)
    ]]>         15b3 101f 15b3 0012 15b3 101f 15b3 0007 15B3 1017 1590 02C8 15B3 1017 1590 032D 15B3 1015 1590 02C9 15B3 1017 15B3 0116 15B3 1017 15B3 0052 15b3 1017 1590 0246 15B3 1017 1590 0346 15B3 1017 15B3 0117 15B3 101D 15B3 0042 15B3 1015 1590 02C1 15B3 1015 1590 02C7 15B3 1015 15B3 0102 15B3 1015 15B3 0047 15B3 1015 1590 00D3 15B3 1015 1590 00D4 15b3 1013 1590 00C7 15b3 1013 1590 00C8 15b3 1017 1590 0256 15b3 1017 1590 0282 15b3 101B 1590 02AB 15B3 101B 15B3 0068 15B3 101B 1590 0347 15B3 101B 1590 0345 15B3 101B 1590 0348 15b3 101B 1590 02AE 15B3 101B 15B3 0069 15b3 101B 1590 02AF 15B3 101B 15B3 0074 15B3 101D 15B3 0040 ven_15B3&dev_1021&subsys_005315B3 15B3 1021 15B3 0086 15B3 1021 15B3 0085 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm software:rpm kmod-mlnx-ofa_kernel-24.07-OFED.24.07.0.6.1.1.rhel9u4.x86_64.rpm mlnx-ofa_kernel-24.07-OFED.24.07.0.6.1.1.rhel9u4.x86_64.rpm file://./packages/mlnx-ofa_kernel-24.07-OFED.24.07.0.6.1.1.rhel9u4.x86_64.rpm ./bin/mlnx_conf_mgr.sh ./bin/mlnx_interface_mgr.sh ./etc/infiniband ./etc/infiniband/info ./etc/infiniband/mlx5.conf ./etc/infiniband/openib.conf ./etc/init.d/openibd ./etc/libibverbs.d ./etc/libibverbs.d/mlx5.driver ./etc/modprobe.d/ib_ipoib.conf ./etc/modprobe.d/mlnx-bf.conf ./etc/modprobe.d/mlnx.conf ./etc/rdma ./etc/rdma/mlx4.conf ./etc/rdma/modules ./etc/rdma/modules/rdma.conf ./etc/systemd/system/mlnx_interface_mgr@.service ./lib/udev/auxdev-sf-netdev-rename ./lib/udev/mlnx_bf_udev ./lib/udev/rules.d/83-mlnx-sf-name.rules ./lib/udev/rules.d/90-ib.rules ./lib/udev/sf-rep-netdev-rename ./sbin/mlnx-sf ./sbin/mlnx_bf_configure ./sbin/sysctl_perf_tuning ./usr/bin/hca_self_test.ofed ./usr/bin/ib_atomic_bw ./usr/bin/ib_atomic_lat ./usr/bin/ib_read_bw ./usr/bin/ib_read_lat ./usr/bin/ib_send_bw ./usr/bin/ib_send_lat ./usr/bin/ib_write_bw ./usr/bin/ib_write_lat ./usr/bin/mlnx_dump_parser ./usr/bin/mlnx_perf ./usr/bin/mlnx_qos ./usr/bin/mlx_fs_dump ./usr/bin/ofed_info ./usr/bin/ofed_rpm_info ./usr/bin/raw_ethernet_burst_lat ./usr/bin/raw_ethernet_bw ./usr/bin/raw_ethernet_fs_rate ./usr/bin/raw_ethernet_lat ./usr/bin/run_perftest_loopback ./usr/bin/run_perftest_multi_devices ./usr/bin/tc_wrap.py ./usr/lib/.build-id ./usr/lib/.build-id/01 ./usr/lib/.build-id/01/65cd6d7e9a4a2a7efad28955a64e14caef5b4a ./usr/lib/.build-id/07 ./usr/lib/.build-id/07/ebb085928703856ecec45573c4dfabc6f7f107 ./usr/lib/.build-id/18 ./usr/lib/.build-id/18/4f6203edd294a5fe435a52652cf02938b87493 ./usr/lib/.build-id/1b ./usr/lib/.build-id/1b/947dd22cb3ef725d1bd4f2e32b59d9b9efe84d ./usr/lib/.build-id/1c ./usr/lib/.build-id/1c/d93dd9ca71f49219d263a0d7737d2b8a05ea88 ./usr/lib/.build-id/2e ./usr/lib/.build-id/2e/ddd4f8d6c2b9e34ce1a6d0714d50494f46212f ./usr/lib/.build-id/39 ./usr/lib/.build-id/39/b487a2c1054221b0fe0b0083a6db4eb9a231ad ./usr/lib/.build-id/4a ./usr/lib/.build-id/4a/4d3e503137630897f8c8bd4e211ac67b60728d ./usr/lib/.build-id/61 ./usr/lib/.build-id/61/ce3df2821a0be40503864ffb64293f76b116e9 ./usr/lib/.build-id/75 ./usr/lib/.build-id/75/5c8b8838d98fd93f2dc137853bbc6fddeb79e8 ./usr/lib/.build-id/79 ./usr/lib/.build-id/79/8553b86b5b145ee501ae208daec41e1f18ff09 ./usr/lib/.build-id/86 ./usr/lib/.build-id/86/eb8710be53a6d944c1bc93bb7010aa120cfcbe ./usr/lib/.build-id/8f ./usr/lib/.build-id/8f/79e44f78ac8130822a189f769b7cbb9ebe1d55 ./usr/lib/.build-id/9b ./usr/lib/.build-id/9b/34937d1ddd342695b9035850a2227970b1dc7a ./usr/lib/.build-id/a0 ./usr/lib/.build-id/a0/c52235b75bb931d37d210b81247471d3fe50b3 ./usr/lib/.build-id/aa ./usr/lib/.build-id/aa/8a7d4cc289610b0db3edfc900ec1f29f2c1dff ./usr/lib/.build-id/bd ./usr/lib/.build-id/bd/af9b7da87ad617b939e195e7c1a3797519407a ./usr/lib/.build-id/de ./usr/lib/.build-id/de/af56cdc4fb673af8e8597dd35e2f1cf80f8299 ./usr/lib/.build-id/e9 ./usr/lib/.build-id/e9/90d057132056920035caab53d9a1433e7c4d7c ./usr/lib/.build-id/f2 ./usr/lib/.build-id/f2/922adfc17aaba83491b9ae5d4989297f98173e ./usr/lib/.build-id/fc ./usr/lib/.build-id/fc/1145f811cca2b54ab917be152dff4eec8c14dc ./usr/lib/dracut ./usr/lib/dracut/modules.d ./usr/lib/dracut/modules.d/05rdma ./usr/lib/dracut/modules.d/05rdma/module-setup.sh ./usr/lib/modprobe.d ./usr/lib/modprobe.d/libmlx4.conf ./usr/lib/systemd/system/openibd.service ./usr/lib/systemd/system/rdma-ndd.service ./usr/lib/udev/rdma_rename ./usr/lib/udev/rules.d ./usr/lib/udev/rules.d/60-rdma-ndd.rules ./usr/lib/udev/rules.d/60-rdma-persistent-naming.rules ./usr/lib/udev/rules.d/75-rdma-description.rules ./usr/lib/udev/rules.d/90-rdma-umad.rules ./usr/lib64/libefa.so.1 ./usr/lib64/libefa.so.1.3.52.0 ./usr/lib64/libibumad.so.3 ./usr/lib64/libibumad.so.3.2.52.0 ./usr/lib64/libibverbs ./usr/lib64/libibverbs.so.1 ./usr/lib64/libibverbs.so.1.14.52.0 ./usr/lib64/libibverbs/libmlx5-rdmav34.so ./usr/lib64/libmlx4.so.1 ./usr/lib64/libmlx4.so.1.0.52.0 ./usr/lib64/libmlx5.so.1 ./usr/lib64/libmlx5.so.1.24.52.0 ./usr/lib64/librdmacm.so.1 ./usr/lib64/librdmacm.so.1.3.52.0 ./usr/lib64/rsocket ./usr/lib64/rsocket/librspreload.so ./usr/lib64/rsocket/librspreload.so.1 ./usr/lib64/rsocket/librspreload.so.1.0.0 ./usr/libexec/mlx4-setup.sh ./usr/sbin/cma_roce_mode ./usr/sbin/cma_roce_tos ./usr/sbin/common_irq_affinity.sh ./usr/sbin/compat_gid_gen ./usr/sbin/ib2ib_setup ./usr/sbin/ibdev2netdev ./usr/sbin/mlnx_affinity ./usr/sbin/mlnx_tune ./usr/sbin/mlnxofedctl ./usr/sbin/ofed_uninstall.sh ./usr/sbin/rdma-ndd ./usr/sbin/set_irq_affinity.sh ./usr/sbin/set_irq_affinity_bynode.sh ./usr/sbin/set_irq_affinity_cpulist.sh ./usr/sbin/setup_mr_cache.sh ./usr/sbin/show_counters ./usr/sbin/show_gids ./usr/sbin/show_irq_affinity.sh ./usr/sbin/show_irq_affinity_hints.sh ./usr/sbin/sysinfo-snapshot.py ./usr/sbin/vendor_post_uninstall.sh ./usr/sbin/vendor_pre_uninstall.sh ./usr/share/doc/libibverbs ./usr/share/doc/libibverbs/libibverbs.md ./usr/share/doc/librdmacm ./usr/share/doc/librdmacm/librdmacm.md ./usr/share/doc/mlnx-ofa_kernel ./usr/share/doc/mlnx-ofa_kernel/82-net-setup-link.rules ./usr/share/doc/mlnx-ofa_kernel/vf-net-link-name.sh ./usr/share/doc/mlnx-tools ./usr/share/doc/mlnx-tools/ib2ib_setup.txt ./usr/share/doc/perftest ./usr/share/doc/perftest/COPYING ./usr/share/doc/perftest/README ./usr/share/doc/perftest/runme ./usr/share/doc/rdma-core ./usr/share/doc/rdma-core/70-persistent-ipoib.rules ./usr/share/doc/rdma-core/README.md ./usr/share/doc/rdma-core/tag_matching.md ./usr/share/doc/rdma-core/udev.md ./usr/share/licenses/mlnx-tools ./usr/share/licenses/mlnx-tools/LICENSE ./usr/share/licenses/rdma-core ./usr/share/licenses/rdma-core/COPYING.BSD_FB ./usr/share/licenses/rdma-core/COPYING.BSD_MIT ./usr/share/licenses/rdma-core/COPYING.GPL2 ./usr/share/licenses/rdma-core/COPYING.md ./usr/share/man/man1/ib_atomic_bw.1.gz ./usr/share/man/man1/ib_atomic_lat.1.gz ./usr/share/man/man1/ib_read_bw.1.gz ./usr/share/man/man1/ib_read_lat.1.gz ./usr/share/man/man1/ib_send_bw.1.gz ./usr/share/man/man1/ib_send_lat.1.gz ./usr/share/man/man1/ib_write_bw.1.gz ./usr/share/man/man1/ib_write_lat.1.gz ./usr/share/man/man1/perftest.1.gz ./usr/share/man/man1/raw_ethernet_burst_lat.1.gz ./usr/share/man/man1/raw_ethernet_bw.1.gz ./usr/share/man/man1/raw_ethernet_fs_rate.1.gz ./usr/share/man/man1/raw_ethernet_lat.1.gz ./usr/share/man/man7/rsocket.7.gz ./usr/share/man/man8/ib2ib_setup.8.gz ./usr/share/man/man8/mlnxofedctl.8.gz ./usr/share/man/man8/rdma-ndd.8.gz ./usr/share/mlnx-tools/python/dcbnetlink.py ./usr/share/mlnx-tools/python/netlink.py ./usr/share/mlnx_ofed/mlnx_bf_assign_ct_cores.sh ./usr/share/smartupdate/mlnx-ofa_kernel/component.xml kmod-mlnx-ofa_kernel-24.07-OFED.24.07.0.6.1.1.rhel9u4.x86_64.rpm file://./packages/kmod-mlnx-ofa_kernel-24.07-OFED.24.07.0.6.1.1.rhel9u4.x86_64.rpm ./etc/depmod.d/zz01-mlnx-ofa_kernel-bnxt_re.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-cifs.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-efa.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-hfi1.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_cm.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_core.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_ipoib.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_iser.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_isert.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_srp.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_srpt.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_ucm.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_umad.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-ib_uverbs.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-irdma.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-iw_cm.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-iw_cxgb4.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mana_ib.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlx4_ib.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlx5-vfio-pci.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlx5_core.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlx5_dpll.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlx5_ib.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlx5_vdpa.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlx_compat.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlxdevm.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlxfw.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-mlxsw_spectrum.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-nvme-rdma.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-nvmet-rdma.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-opa_vnic.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-qedr.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-rdma_cm.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-rdma_rxe.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-rdma_ucm.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-rdmavt.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-rpcrdma.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-siw.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-svcrdma.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-usnic_verbs.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-vmw_pvrdma.conf ./etc/depmod.d/zz01-mlnx-ofa_kernel-xprtrdma.conf ./lib/modules/5.14.0-427.13.1.el9_4.x86_64 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/compat ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/compat/mlx_compat.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/ib_cm.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/ib_core.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/ib_ucm.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/ib_umad.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/ib_uverbs.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/iw_cm.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/rdma_cm.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/core/rdma_ucm.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/bnxt_re ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/bnxt_re/bnxt_re.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/cxgb4 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/cxgb4/iw_cxgb4.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/efa ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/efa/efa.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/hfi1 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/hfi1/hfi1.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/irdma ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/irdma/irdma.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/mana ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/mana/mana_ib.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/mlx4 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/mlx4/mlx4_ib.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/mlx5 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/mlx5/mlx5_ib.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/qedr ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/qedr/qedr.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/usnic ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/usnic/usnic_verbs.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/vmw_pvrdma ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/hw/vmw_pvrdma/vmw_pvrdma.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/sw ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/sw/rdmavt ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/sw/rdmavt/rdmavt.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/sw/rxe ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/sw/rxe/rdma_rxe.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/sw/siw ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/sw/siw/siw.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/ipoib ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/ipoib/ib_ipoib.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/iser ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/iser/ib_iser.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/isert ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/isert/ib_isert.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/opa_vnic ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/opa_vnic/opa_vnic.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/srp ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/srp/ib_srp.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/srpt ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/infiniband/ulp/srpt/ib_srpt.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlx5 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlx5/core ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlx5/core/mlx5_dpll.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlxfw ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlxfw/mlxfw.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlxsw ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/net/ethernet/mellanox/mlxsw/mlxsw_spectrum.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/nvme ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/nvme/host ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/nvme/host/nvme-rdma.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/nvme/target ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/nvme/target/nvmet-rdma.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/vdpa ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/vdpa/mlx5 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/vdpa/mlx5/mlx5_vdpa.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/vfio ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/vfio/pci ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/vfio/pci/mlx5 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/drivers/vfio/pci/mlx5/mlx5-vfio-pci.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/fs ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/fs/cifs ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/fs/cifs/cifs.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net/mlxdevm ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net/mlxdevm/mlxdevm.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net/sunrpc ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net/sunrpc/xprtrdma ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net/sunrpc/xprtrdma/rpcrdma.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net/sunrpc/xprtrdma/svcrdma.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/mlnx-ofa_kernel/net/sunrpc/xprtrdma/xprtrdma.ko ./usr/share/smartupdate/kmod-mlnx-ofa_kernel/component.xml     changed Integrated Smart Update Tools for Windows x64 Integrated Smart Update Tools for Windows Hewlett Packard Enterprise Microsoft Windows Server 2022 Microsoft Windows Server 2025 Lights Out Server Application - System Management English (US) For prerequisite information, please see the iSUT Release Notes.

    ]]>
  • Download the Smart Component (cpxxxxxx.exe) file to a local directory on the server where you want to install the software.
  • Change to the directory.
  • Run the .exe file by double-clicking it. A dialog box will display.
  • Click the ‘Install’ button to install the Smart Update Tools.
    • ]]>         103C 3307 1590 00E4 103C 3307 0000 0000 103C 3306 1590 00E4 103C 3306 0000 0000 103C 3306 1590 027F 103C 3307 1590 027F cpqsetup.exe Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 150 %ProgramFiles%\Hewlett-Packard\HPSUT\bin %ProgramFiles%\SUT\bin cp063511.exe Enter Polling interval in minutes. Minimum 5 minutes Maximum 1440 minutes. 0 12 0-9 * Mode in which SUT runs. 0 24 * * Enter the directory where the staging has to be done. The default path for staging directory in Windows is %localappdata%/sut/stagingdirectory. The default path for staging directory in Linux is /var/tmp/sut/stagingdirectory. 0 255 0..9A..Z;a..z;-/ * cp063511.exe file://./packages/cp063511.exe CHIF/ CHIF/X64/ cp039984.exe cp039985.exe cp040013.exe cp041932.exe cp049467.exe cp053254.exe cp053256.exe cp061694.exe cp061730.exe cp063511.xml cpqsetup.exe cp_data.xml HPSUT/ HPSUT/X64/ install.xml multisetup.dll sut.msi sutinstaller.exe sut_cfg_default.dat sut_config_en.xml sut_config_ja.xml     new Universal Firmware Package for Drives - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Universal Firmware Package for Drives - VV003840KXWBF, VV007680KXWBL and VV015360KXWBN Hewlett Packard Enterprise Microsoft Windows Server 2022 SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server Storage Firmware - PCIe NVMe Storage Disk English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         Release Version and/or Date:
         HPK2
    Last Recommended or Critical Version:
         None
    Previous Version of Firmware:
         None
    Enhancements/New Features:
         None
    Problems Fixed:
        This is a recommended FW release that provides bug fixes for the P5430
    Known Issues:
         None

    ]]>         VV003840KXWBF VV007680KXWBL VV015360KXWBN Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme Solidigm_P5x30_SP54304KHPK2.fwpkg Solidigm_P5x30_SP54304KHPK2.fwpkg file://./packages/Solidigm_P5x30_SP54304KHPK2.fwpkg payload.json Solidigm_P5x30_SP54304KHPK2.HPb Solidigm_P5x30_SP54304KHPK2.xml f6de0320-2e0f-489a-b238-6dd8ae7c3811 Solidigm-P5x30-NVMe 0 True Solidigm_P5x30_SP54304KHPK2.HPb 120 1 True True True Firmware True 562340a5-3056-3330-3834-304b58574246 HPK2 Solidigm-P5x30-NVMe 0 True Solidigm_P5x30_SP54304KHPK2.HPb 120 1 True True True Firmware True 562340a5-3056-3730-3638-304b5857424c HPK2 Solidigm-P5x30-NVMe 0 True Solidigm_P5x30_SP54304KHPK2.HPb 120 1 True True True Firmware True 562340a5-3056-3531-3336-304b5857424e HPK2 FWPKG-v2 ComboFirmware Bmc Uefi     new Intel Firmware Package For E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter Intel Firmware Package For E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.

    Additional Information:

    • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
    ]]>         This software package contains the following firmware versions for the below listed supported network adapters:

    NIC EEPROM ID OROM Version NVM Version
    Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter 8001E8B1 1.3682.0 4.60

    In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.6

    ]]>         8086 1592 8086 0002 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_CQDA2_4p60_PLDMoMCTP_8001E8B1.fwpkg HPE_E810_CQDA2_4p60_PLDMoMCTP_8001E8B1.fwpkg file://./packages/HPE_E810_CQDA2_4p60_PLDMoMCTP_8001E8B1.fwpkg HPE_E810_CQDA2_4p60_PLDMoMCTP_8001E8B1.HPb HPE_E810_CQDA2_4p60_PLDMoMCTP_8001E8B1.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-CQDA2 adapter 0 True HPE_E810_CQDA2_4p60_PLDMoMCTP_8001E8B1.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-8086-159280860002 4.60 FWPKG-v2 Firmware Bmc     new NVIDIA Firmware Package (FWPKG) for HPE InfiniBand NDR200/Ethernet 200Gb 1-port OSFP PCIe5 x16 MCX75310AAS-HEAT Adapter : HPE part numbers P45642-B22 and P45642-H22 NVIDIA Firmware Package (FWPKG) for HPE InfiniBand NDR200/Ethernet 200Gb 1-port OSFP PCIe5 x16 MCX75310AAS-HEAT Adapter : HPE part numbers P45642-B22 and P45642-H22 Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 ServerOptions Networking Server Firmware - Network English (US) FWPKG will work only if the iLO5 firmware version is 2.30 or higher.

    ]]>         Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         Validated and Supported NDR200 / 200 GbE cables and transceivers:

     

    HCA to Switch:

    • P45698-B22        HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 1m Splitter Direct Attach Copper Cable    (HCA to Switch)
    • P45698-B24        HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 2m Splitter Direct Attach Copper Cable    (HCA to Switch)
    • P45698-B25        HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 2.5m Splitter Direct Attach Copper Cable    (HCA to Switch)
    • P45698-B26        HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 3m Splitter Direct Attach Copper Cable    (HCA to Switch)
    • P45698-B23        HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 1.5m Splitter Direct Attach Copper Cable    (HCA to Switch)
    • P50397-B21        HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 4m Splitter Active Copper Cable    (HCA to Switch)
    • P50397-B22        HPE InfiniBand NDR200/Ethernet OSFP to 4xOSFP 5m Splitter Active Copper Cable    (HCA to Switch)
    • P49766-B21        HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 3m Splitter Cable      (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
    • P49766-B22        HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 5m Splitter Cable      (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
    • P49766-B23        HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 10m Splitter Cable    (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
    • P49766-B24        HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 15m Splitter Cable    (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
    • P49766-B25        HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 20m Splitter Cable    (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
    • P49766-B26        HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 30m Splitter Cable    (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)

    HCA side transceiver:

    • P49764-B21        HPE InfiniBand NDR/Ethernet 1x400Gb OSFP Multi-mode 50m HCA-side Transceiver    (HCA Multi-mode optical fiber transceiver)


    Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.

    ]]>         15B3 1021 15B3 0085 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic 28_42_1000-MCX75310AAS-HEAT_HPE2_Ax.pldm.fwpkg 28_42_1000-MCX75310AAS-HEAT_HPE2_Ax.pldm.fwpkg file://./packages/28_42_1000-MCX75310AAS-HEAT_HPE2_Ax.pldm.fwpkg 28_42_1000-MCX75310AAS-HEAT_HPE2_Ax.pldm.signed 28_42_1000-MCX75310AAS-HEAT_HPE2_Ax.pldm.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb HPE IB NDR200/EN 200G 1p OSFP Adptr 0 True 28_42_1000-MCX75310AAS-HEAT_HPE2_Ax.pldm.signed 360 1 True True False True Firmware True a6b1a447-382a-5a4f-15b3-102115b30085 28.42.1000 FWPKG-v2 Firmware Bmc     new Intel Firmware Package For E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter Intel Firmware Package For E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.

    Additional Information:

    • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
    ]]>         This software package contains the following firmware versions for the below listed supported network adapters:

    NIC EEPROM ID OROM Version NVM Version
    Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter 8001E8B3 1.3682.0 4.60

    In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.6

    ]]>         8086 159B 8086 0003 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_XXVDA2_SD_4p60_PLDMoMCTP_8001E8B3.fwpkg HPE_E810_XXVDA2_SD_4p60_PLDMoMCTP_8001E8B3.fwpkg file://./packages/HPE_E810_XXVDA2_SD_4p60_PLDMoMCTP_8001E8B3.fwpkg HPE_E810_XXVDA2_SD_4p60_PLDMoMCTP_8001E8B3.HPb HPE_E810_XXVDA2_SD_4p60_PLDMoMCTP_8001E8B3.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-XXVDA2 adapter 0 True HPE_E810_XXVDA2_SD_4p60_PLDMoMCTP_8001E8B3.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-8086-159b80860003 4.60 FWPKG-v2 Firmware Bmc     new Mellanox Firmware Package (FWPKG) for Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE Mellanox Firmware Package (FWPKG) for Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Microsoft Windows Server 2025 ServerOptions Networking Server Firmware - Network English (US) FWPKG will work only if the firmware version flashed on the adapter is 22.27.1016 or later and iLO5 firmware version must be 2.30 or higher.

    ]]>         Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         This software package contains the following firmware versions:

    Mellanox Ethernet Only Adapters Firmware Version PSID
    Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21) 22.42.1000 MT_0000000437

     

    ]]>         15B3 101D 15B3 0042 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic 22_42_1000-MCX623106AS-CDA_Ax.pldm.fwpkg 22_42_1000-MCX623106AS-CDA_Ax.pldm.fwpkg file://./packages/22_42_1000-MCX623106AS-CDA_Ax.pldm.fwpkg 22_42_1000-MCX623106AS-CDA_Ax.pldm.signed 22_42_1000-MCX623106AS-CDA_Ax.pldm.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb HPE Ethernet 100Gb 2-port QSFP56 MCX623106AS-CDAT Adapter 0 True 22_42_1000-MCX623106AS-CDA_Ax.pldm.signed 360 1 True True False True Firmware True a6b1a447-382a-5a4f-15b3-101d15b30042 22.42.1000 FWPKG-v2 Firmware Bmc     new Broadcom Firmware Package for BCM5741x adapters Broadcom Firmware Package for BCM5741x adapters Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Microsoft Windows Server 2025 ServerOptions Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.

    Additional Information:

    • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
    ]]>
  • This software package contains NVM Image version 231.1.162.1 with the following firmware versions:
    NIC Bootcode Version NCSI Version MBA Version UEFI Version RoCE Version
    HPE Ethernet 10Gb 2-port SFP+ BCM57412 Adapter 231.0.153.0
         		 231.0.153.0
         		 231.0.159.0
         		 231.0.159.0
         		 231.0.153.0
     
    HPE Ethernet 10Gb 2-port SFP+ BCM57412 OCP3 Adapter
    HPE Ethernet 10Gb 2-port BaseT BCM57416 Adapter
    HPE Ethernet 10Gb 2-port BaseT BCM57416 OCP3 Adapter
    HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 Adapter
    HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 OCP3 Adapter

    •  

    • Recommend to upgrade to the NVM Image version 226.1.107.0 firmware first for this firmware package, please refer to the following link.

    https://www.hpe.com/global/swpublishing/MTX-0572f282f8134709b2788a1a31

     

    ]]>         14E4 16D7 14E4 1597 14E4 16D7 14E4 1596 14E4 16D8 14E4 1593 14E4 16D8 14E4 1592 14E4 16D6 14E4 1595 14E4 16D6 14E4 1594 14E4 16EE 14E4 1593 14E4 16EE 14E4 1592 14E4 16EF 14E4 1593 14E4 16EF 14E4 1592 14E4 16EB 14E4 1595 14E4 16EB 14E4 1594 14E4 16ED 14E4 1597 14E4 16ED 14E4 1596 14E4 16DE 14E4 1595 14E4 16DE 14E4 1594 14E4 16EC 14E4 1597 14E4 16EC 14E4 1596 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic bcm231.1.162.1.pup.fwpkg bcm231.1.162.1.pup.fwpkg file://./packages/bcm231.1.162.1.pup.fwpkg bcm231.1.162.1.pup.HPb bcm231.1.162.1.pup.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16d614e41595 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16de14e41595 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16eb14e41595 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16d614e41594 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16de14e41594 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16eb14e41594 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16d714e41597 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ec14e41597 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ed14e41597 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16d714e41596 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ec14e41596 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ed14e41596 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16d814e41593 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ee14e41593 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ef14e41593 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16d814e41592 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ee14e41592 231.1.162.1 Broadcom NetXtreme-E BCM5741x adapters 0 True bcm231.1.162.1.pup.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-14e4-16ef14e41592 231.1.162.1 226.1.107.0 FWPKG-v2 ComboFirmware Bmc     new Universal Firmware Package for Drives - MO001600KZYWU, MO003200KZYXB, MO006400KZYXC, VO001920KZYWT, VO003840KZYWV and VO007680KZYXA Universal Firmware Package for Drives - MO001600KZYWU, MO003200KZYXB, MO006400KZYXC, VO001920KZYWT, VO003840KZYWV and VO007680KZYXA Hewlett Packard Enterprise Microsoft Windows Server 2022 SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server Storage Firmware - PCIe NVMe Storage Disk English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         MO001600KZYWU MO003200KZYXB MO006400KZYXC VO001920KZYWT VO003840KZYWV VO007680KZYXA Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme Solidigm_P5x20_4IAAHPK5.fwpkg Solidigm_P5x20_4IAAHPK5.fwpkg file://./packages/Solidigm_P5x20_4IAAHPK5.fwpkg payload.json Solidigm_P5x20_4IAAHPK5.HPb Solidigm_P5x20_4IAAHPK5.xml f6de0320-2e0f-489a-b238-6dd8ae7c3811 Solidigm-P5x20-NVMe 0 True Solidigm_P5x20_4IAAHPK5.HPb 120 1 True True True Firmware True 4d2340a5-304f-3130-3630-304b5a595755 HPK5 Solidigm-P5x20-NVMe 0 True Solidigm_P5x20_4IAAHPK5.HPb 120 1 True True True Firmware True 4d2340a5-304f-3330-3230-304b5a595842 HPK5 Solidigm-P5x20-NVMe 0 True Solidigm_P5x20_4IAAHPK5.HPb 120 1 True True True Firmware True 4d2340a5-304f-3630-3430-304b5a595843 HPK5 Solidigm-P5x20-NVMe 0 True Solidigm_P5x20_4IAAHPK5.HPb 120 1 True True True Firmware True 562340a5-304f-3130-3932-304b5a595754 HPK5 Solidigm-P5x20-NVMe 0 True Solidigm_P5x20_4IAAHPK5.HPb 120 1 True True True Firmware True 562340a5-304f-3330-3834-304b5a595756 HPK5 Solidigm-P5x20-NVMe 0 True Solidigm_P5x20_4IAAHPK5.HPb 120 1 True True True Firmware True 562340a5-304f-3730-3638-304b5a595841 HPK5 FWPKG-v2 ComboFirmware Bmc Uefi     new Intel icea Driver for Microsoft Windows Server 2025 Intel icea Driver for Microsoft Windows Server 2025 Hewlett Packard Enterprise Microsoft Windows Server 2025 Networking Server Driver - Network English (US),Japanese

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> 8086 1592 8086 0002 8086 1592 8086 0006 8086 159B 8086 0003 8086 159B 8086 0005 8086 1593 8086 0005 8086 1592 8086 000E 8086 1593 8086 000C cpqsetup.exe Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 360 %systemroot%\system32\DriverStore\FileRepository\icea.inf_amd64_0d313568beecbfb3 cp064590.exe cp064590.exe file://./packages/cp064590.exe cp064590.xml cpqsetup.exe cp_data.xml icea.cat icea.inf icea.sys iceamsg.dll install.xml manifest_icea.man nicdrvr.dll changed HPE Intel iavf Drivers for SUSE Linux Enterprise Server 15 HPE Intel iavf Drivers for SUSE Linux Enterprise Server 15 SUSE Linux Enterprise Server 15 ServerOptions Networking Server Driver - Network English (US) The binary RPM package(s) provided by this product are pre-compiled kernel module drivers built specifically for the default inbox kernel (stock kernel) that ships with the Linux distribution.  HPE has tested and approved these pre-compiled kernel module RPMs for use with the specified kernel. 

    These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.

    To find the location of the driver source RPM, execute the following command for the kernel module driver RPM:  localhost> rpm -qpi <kernel module driver name>.rpm

    ]]>
  • This component fallback the RPM format to old version for consistency in the same OS major version.
    * The previous web release iavf-kmp-default-4.9.1_k5.14.21_150500.53-1.sles15sp5.x86_64.rpm is unpublished
        - The RPM package name was changed from (hp-iavf-kmp-default) to (iavf-kmp-default). Now we revert this change from (iavf-kmp-default) to (hp-iavf-kmp-default).
        - The new RPM release is deferred to next new OS major release
    * hp-iavf-kmp-default and iavf-kmp-default are different RPM package for OS. They can be together installed in the same time.
      To avoid confusion, if you already download and install iavf-kmp-default-4.9.1_k5.14.21_150500.53-1.sles15sp5.x86_64.rpm, please uninstall the previous RPM by #rpm -e iavf-kmp-default and then install the updated RPM.
    • ]]>         8086 1593 8086 000E 8086 1592 8086 0002 8086 1592 8086 0006 8086 159B 8086 0003 8086 159B 8086 0005 8086 1593 8086 0005 8086 1592 8086 000E 8086 1593 8086 000C 8086 37D2 1590 0218 8086 37D3 1590 0219 8086 1572 8086 00A1 8086 15FF 8086 000C 8086 1572 8086 0008 8086 1572 103C 22FD 8086 1572 103C 22FC 8086 37D1 1590 0217 8086 37CE 1590 0215 8086 37D1 1590 0247 8086 37D1 1590 0216 8086 1581 1590 00F8 8086 37cd 8086 0dd5 8086 1889 8086 0001 8086 154c 8086 0000 8086 1571 8086 0001 Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot. 0 software:rpm software:rpm hp-iavf-kmp-default-4.12.5_k6.4.0_150600.21-1.sles15sp6.x86_64.rpm hp-iavf-kmp-default-4.12.5_k5.14.21_150500.53-1.sles15sp5.x86_64.rpm file://./packages/hp-iavf-kmp-default-4.12.5_k5.14.21_150500.53-1.sles15sp5.x86_64.rpm ./etc/depmod.d/hp-iavf.conf ./etc/dracut.conf.d/hp-iavf-oob.conf ./lib/modules/5.14.21-150500.53-default ./lib/modules/5.14.21-150500.53-default/updates ./lib/modules/5.14.21-150500.53-default/updates/hp-iavf ./lib/modules/5.14.21-150500.53-default/updates/hp-iavf/iavf.ko ./usr/share/smartupdate/hp-iavf-kmp-default/component.xml hp-iavf-kmp-default-4.12.5_k6.4.0_150600.21-1.sles15sp6.x86_64.rpm file://./packages/hp-iavf-kmp-default-4.12.5_k6.4.0_150600.21-1.sles15sp6.x86_64.rpm ./etc/depmod.d/hp-iavf.conf ./etc/dracut.conf.d/hp-iavf-oob.conf ./lib/modules/6.4.0-150600.21-default ./lib/modules/6.4.0-150600.21-default/updates ./lib/modules/6.4.0-150600.21-default/updates/hp-iavf ./lib/modules/6.4.0-150600.21-default/updates/hp-iavf/iavf.ko ./usr/share/smartupdate/hp-iavf-kmp-default/component.xml     new iLO 6 Channel Interface Driver for Microsoft Windows Server 2022 iLO 6 Channel Interface Driver Hewlett Packard Enterprise Microsoft Windows Server 2022 Lights Out Server Driver - System Management English (US) Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         103c 3307 1590 00E4 cpqsetup.exe Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 600 %systemroot%\system32\drivers cp062291.exe cp062291.exe file://./packages/cp062291.exe cp062291.xml cpqsetup.exe generic.dll install.xml necheschif.cat necheschif.inf necheschif.sys     new ROM Flash Firmware Package - HPE ProLiant DL320/DL340 Gen12 SP (U69) Servers HPE ProLiant DL320//DL340 Gen12 SP (U69) Servers Hewlett Packard Enterprise Server BIOS - System ROM English (US) To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>


    This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately.

    ]]>         cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 300 firmware:system U69_1.16_11_08_2024.fwpkg U69_1.16_11_08_2024.fwpkg file://./packages/U69_1.16_11_08_2024.fwpkg payload.json U69_1.16_11_08_2024.signed.flash U69_1.16_11_08_2024.xml aa148d2e-6e09-453e-bc6f-63baa5f5ccc4 System BIOS - U69 0 True U69_1.16_11_08_2024.signed.flash 300 1 False True True False Firmware True 00000000-0000-0000-0000-000000000261 v1.16 (11/08/2024) System BIOS - U69 0 True U69_1.16_11_08_2024.signed.flash 300 1 False True True False Firmware True 00000000-0000-0000-0000-000000000263 v1.16 (11/08/2024) FWPKG-v2 ComboFirmware Bmc     new NVIDIA Firmware Package (FWPKG) for HPE InfiniBand NDR/Ethernet 400Gb 1-port OSFP PCIe5 x16 MCX75310AAS-NEAT Adapter : HPE part numbers P45641-B23 and P45641-H23 NVIDIA Firmware Package (FWPKG) for HPE InfiniBand NDR/Ethernet 400Gb 1-port OSFP PCIe5 x16 MCX75310AAS-NEAT Adapter : HPE part numbers P45641-B23 and P45641-H23 Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         Validated and Supported NDR / 400GbE cables and transceivers:

     

    HCA to Switch:

    • P45697-B22    HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 1m Splitter Direct Attach Copper Cable     (HCA to Switch)
    • P45697-B23    HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 1.5m Splitter Direct Attach Copper Cable     (HCA to Switch)
    • P45697-B24    HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 2m Splitter Direct Attach Copper Cable    (HCA to Switch)
    • P45697-B25    HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 2.5m Splitter Direct Attach Copper Cable    (HCA to Switch)
    • P45697-B26    HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 3m Splitter Direct Attach Copper Cable    (HCA to Switch)
    • P50396-B21        HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 4m Splitter Active Copper Cable    (HCA to Switch)
    • P50396-B22        HPE InfiniBand NDR/Ethernet OSFP to 2xOSFP 5m Splitter Active Copper Cable    (HCA to Switch)
    • P49765-B21        HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 3m Cable    (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
    • P49765-B22        HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 5m Cable    (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
    • P49765-B23        HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 10m Cable    (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
    • P49765-B24        HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 15m Cable    (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
    • P49765-B25        HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 20m Cable    (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
    • P49765-B26        HPE InfiniBand NDR/Ethernet 8 Fiber MPO to 8 Fiber MPO Multi-mode 30m Cable    (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)

    HCA side transceiver:

    • P49764-B21        HPE InfiniBand NDR/Ethernet 1x400Gb OSFP Multi-mode 50m HCA-side Transceiver    (HCA-side Multi-mode optical fiber transceiver)

     

    Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.

    ]]>         15B3 1021 15B3 0086 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic 28_42_1000-MCX75310AAS-NEAT_HPE2_Ax.pldm.fwpkg 28_42_1000-MCX75310AAS-NEAT_HPE2_Ax.pldm.fwpkg file://./packages/28_42_1000-MCX75310AAS-NEAT_HPE2_Ax.pldm.fwpkg 28_42_1000-MCX75310AAS-NEAT_HPE2_Ax.pldm.signed 28_42_1000-MCX75310AAS-NEAT_HPE2_Ax.pldm.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb HPE IB NDR/EN 400G 1p OSFP Adptr 0 True 28_42_1000-MCX75310AAS-NEAT_HPE2_Ax.pldm.signed 360 1 True True False True Firmware True a6b1a447-382a-5a4f-15b3-102115b30086 28.42.1000 FWPKG-v2 Firmware Bmc     new Mellanox Firmware Package (FWPKG) - Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE Mellanox Firmware Package (FWPKG) - Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE Hewlett Packard Enterprise Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Microsoft Windows Server 2025 ServerOptions Networking Server Firmware - Network English (US) FWPKG will work only if the firmware version flashed on the adapter is 20.27.1016 or later and iLO5 firmware version must be 2.30 or higher.

    ]]>         Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         This software package contains the following firmware versions:

    Mellanox Ethernet Only Adapters Firmware Version PSID
    Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21) 26.42.1000 MT_0000000575

     

    ]]>         15b3 101f 15b3 0012 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic 26_42_1000-MCX631102AS-ADA_Ax.pldm.fwpkg 26_42_1000-MCX631102AS-ADA_Ax.pldm.fwpkg file://./packages/26_42_1000-MCX631102AS-ADA_Ax.pldm.fwpkg 26_42_1000-MCX631102AS-ADA_Ax.pldm.signed 26_42_1000-MCX631102AS-ADA_Ax.pldm.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb MLX MCX631102 10/25GbE 2p SFP28 Adptr 0 True 26_42_1000-MCX631102AS-ADA_Ax.pldm.signed 360 1 True True False True Firmware True a6b1a447-382a-5a4f-15b3-101f15b30012 26.42.1000 FWPKG-v2 Firmware Bmc     new Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter Intel Firmware Package For E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.

    Additional Information:

    • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
    ]]>         This software package contains the following firmware versions for the below listed supported network adapters:

    NIC EEPROM ID OROM Version NVM Version
    Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter 8001E8B2 1.3682.0 4.60

    In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.6

    ]]>         8086 1593 8086 0005 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_XXVDA4_FH_4p60_PLDMoMCTP_8001E8B2.fwpkg HPE_E810_XXVDA4_FH_4p60_PLDMoMCTP_8001E8B2.fwpkg file://./packages/HPE_E810_XXVDA4_FH_4p60_PLDMoMCTP_8001E8B2.fwpkg HPE_E810_XXVDA4_FH_4p60_PLDMoMCTP_8001E8B2.HPb HPE_E810_XXVDA4_FH_4p60_PLDMoMCTP_8001E8B2.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-XXVDA4 adapter 0 True HPE_E810_XXVDA4_FH_4p60_PLDMoMCTP_8001E8B2.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-8086-159380860005 4.60 FWPKG-v2 Firmware Bmc     new Identifiers for Intel Xeon Scalable Processors (Sixth Generation) for Microsoft Windows Identifiers for Intel Xeon Scalable Processors (Sixth Generation) Hewlett Packard Enterprise Microsoft Windows Server 2022 Microsoft Windows Server 2025 Server Driver - Chipset English (US),Japanese From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 600 %ProgramFiles%\Hewlett Packard Enterprise\chipset cp060373.exe cp060373.exe file://./packages/cp060373.exe cp060373.xml cpqsetup.exe installer.dll pnp/ pnp/graniterapids.cat pnp/GraniteRapidsSystem.inf pnp/sapphirerapids.cat pnp/SapphireRapidsSystem.inf pnp/server_common.cat pnp/Server_CommonSystem.inf new HPE Broadcom NetXtreme-E Drivers for Red Hat Enterprise Linux 9 HPE Broadcom NetXtreme-E Drivers for Red Hat Enterprise Linux 9 Red Hat Enterprise Linux 9 Server ServerOptions Networking Server Driver - Network English (US) This product is required to unload inbox NIC driver before install OOB driver if user want OOB driver to take effect immediately. Otherwise, OOB driver will take effect after system reboot under inbox driver is loaded.

    ]]>     The binary RPM package(s) provided by this product are pre-compiled kernel module drivers built specifically for the default inbox kernel (stock kernel) that ships with the Linux distribution.  HPE has tested and approved these pre-compiled kernel module RPMs for use with the specified kernel. 

    These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.

    To find the location of the driver source RPM, execute the following command for the kernel module driver RPM:  localhost> rpm -qpi <kernel module driver name>.rpm

    ]]>         14E4 16D7 1590 0211 14E4 16D7 1590 020E 14E4 16D7 14E4 1597 14E4 16D7 14E4 1596 14E4 16D8 1590 0212 14E4 16D8 1590 020C 14E4 16D7 1590 02C3 14E4 16D7 1590 02C5 14E4 16D8 14E4 1593 14E4 16D8 14E4 1592 14E4 16D6 14E4 1595 14E4 16D6 14E4 1594 14E4 16EE 1590 0212 14E4 16EE 1590 020C 14E4 16EC 1590 0211 14E4 16EC 1590 020E 14E4 16EE 14E4 1593 14E4 16EE 14E4 1592 14E4 16EF 1590 0212 14E4 16EF 1590 020C 14E4 16ED 1590 0211 14E4 16ED 1590 020E 14E4 16EF 14E4 1593 14E4 16EF 14E4 1592 14E4 16EB 14E4 1595 14E4 16EB 14E4 1594 14E4 16ED 14E4 1597 14E4 16ED 14E4 1596 14E4 16DE 14E4 1595 14E4 16DE 14E4 1594 14E4 16EC 14E4 1597 14E4 16EC 14E4 1596 14E4 16DC 1590 16D8 14E4 16DC 1590 16D7 14E4 16C5 0000 0000 14E4 16C5 1590 020C 14E4 16C5 1590 0211 14E4 16C5 1590 020E 14E4 16C1 1590 16D8 14E4 16BD 0000 0000 14E4 16BD 1590 020C 14E4 16BD 1590 0211 14E4 16BD 1590 020E 14E4 16EC 1590 02C3 14E4 16EC 1590 02C5 14E4 16ED 1590 02C3 14E4 16ED 1590 02C5 14E4 16DC 1590 02C3 14E4 16DC 1590 02C5 14E4 16C5 1590 02C3 14E4 16C5 1590 02C5 14E4 16C1 1590 02C3 14E4 16C1 1590 02C5 14E4 16BD 1590 02C3 14E4 16BD 1590 02C5 14e4 1801 14e4 1599 14e4 1801 14e4 1598 14e4 1804 14e4 1599 14e4 1804 14e4 1598 14E4 1751 14E4 1599 14E4 1751 14E4 1598 14E4 16C1 1590 16D7 Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot. 0 software:rpm software:rpm kmod-bnxt_en-1.10.3-231.0.162.0.rhel9u4.x86_64.rpm kmod-bnxt_en-1.10.3-231.0.162.0.rhel9u3.x86_64.rpm file://./packages/kmod-bnxt_en-1.10.3-231.0.162.0.rhel9u3.x86_64.rpm ./etc/depmod.d/bnxt_en.conf ./etc/depmod.d/bnxt_re.conf ./lib/modules/5.14.0-362.8.1.el9_3.x86_64 ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra/bnxt_en ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra/bnxt_en/bnxt_en.ko ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra/bnxt_en/drivers ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra/bnxt_en/drivers/infiniband ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra/bnxt_en/drivers/infiniband/hw ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra/bnxt_en/drivers/infiniband/hw/bnxt_re ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra/bnxt_en/drivers/infiniband/hw/bnxt_re/bnxt_re.ko ./usr/lib/.build-id ./usr/lib/.build-id/1c ./usr/lib/.build-id/1c/0dd7576fc8cd55ea898b41e4e5fc148f11351a ./usr/lib/.build-id/1e ./usr/lib/.build-id/1e/fe02f0f9052cb2963711403d886dae4d7a2eb5 ./usr/share/smartupdate/kmod-bnxt_en/component.xml kmod-bnxt_en-1.10.3-231.0.162.0.rhel9u4.x86_64.rpm file://./packages/kmod-bnxt_en-1.10.3-231.0.162.0.rhel9u4.x86_64.rpm ./etc/depmod.d/bnxt_en.conf ./etc/depmod.d/bnxt_re.conf ./lib/modules/5.14.0-427.13.1.el9_4.x86_64 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/bnxt_en ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/bnxt_en/bnxt_en.ko ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/bnxt_en/drivers ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/bnxt_en/drivers/infiniband ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/bnxt_en/drivers/infiniband/hw ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/bnxt_en/drivers/infiniband/hw/bnxt_re ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/bnxt_en/drivers/infiniband/hw/bnxt_re/bnxt_re.ko ./usr/lib/.build-id ./usr/lib/.build-id/27 ./usr/lib/.build-id/27/354452cf073b87b54dd44390fad526be85a619 ./usr/lib/.build-id/27/40b9f2fc95f38332af63d8ca4587746d20ca81 ./usr/share/smartupdate/kmod-bnxt_en/component.xml     new Universal Firmware Package for Drives - VR000480KXLXF Universal Firmware Package for Drives - VR000480KXLXF Hewlett Packard Enterprise Microsoft Windows Server 2022 SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server Storage Firmware - PCIe NVMe Storage Disk English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         Release Version and/or Date:
         HPK3
    Last Recommended or Critical Version:
         None
    Previous Version of Firmware:
         None
    Enhancements/New Features:
         None
    Problems Fixed:
        Firmware maintenance release of Samsung M.2 NVMe SSD with HPK3
    Known Issues:
         None

    ]]>         VR000480KXLXF Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme Samsung_PM9A3_PM9A3M2HPK3.fwpkg Samsung_PM9A3_PM9A3M2HPK3.fwpkg file://./packages/Samsung_PM9A3_PM9A3M2HPK3.fwpkg payload.json Samsung_PM9A3_PM9A3M2HPK3.HPb Samsung_PM9A3_PM9A3M2HPK3.xml f6de0320-2e0f-489a-b238-6dd8ae7c3811 Samsung-PM9A3-NVMe 0 True Samsung_PM9A3_PM9A3M2HPK3.HPb 120 1 True True True Firmware True 562340a5-3052-3030-3438-304b584c5846 HPK3 FWPKG-v2 Firmware Bmc Uefi     new Universal Firmware Package for Drives - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Universal Firmware Package for Drives - VV003840KXNTH, VV007680KXNTN and VV015360KXNTP Hewlett Packard Enterprise Microsoft Windows Server 2022 SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server Storage Firmware - PCIe NVMe Storage Disk English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         Release Version and/or Date:
         HPK6
    Last Recommended or Critical Version:
         HPK6
    Previous Version of Firmware:
         HPK5
    Enhancements/New Features:
         None
    Problems Fixed:
        Firmware maintenance release of Samsung PM1743 NVMe SSD with HPK6
    Known Issues:
         None

    ]]>         VV003840KXNTH VV007680KXNTN VV015360KXNTP Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme Samsung_PM1743_GPM1743HPK6.fwpkg Samsung_PM1743_GPM1743HPK6.fwpkg file://./packages/Samsung_PM1743_GPM1743HPK6.fwpkg payload.json Samsung_PM1743_GPM1743HPK6.HPb Samsung_PM1743_GPM1743HPK6.xml f6de0320-2e0f-489a-b238-6dd8ae7c3811 Samsung-PM1743-NVMe 0 True Samsung_PM1743_GPM1743HPK6.HPb 120 1 True True True Firmware True 562340a5-3056-3330-3834-304b584e5448 HPK6 Samsung-PM1743-NVMe 0 True Samsung_PM1743_GPM1743HPK6.HPb 120 1 True True True Firmware True 562340a5-3056-3730-3638-304b584e544e HPK6 Samsung-PM1743-NVMe 0 True Samsung_PM1743_GPM1743HPK6.HPb 120 1 True True True Firmware True 562340a5-3056-3531-3336-304b584e5450 HPK6 FWPKG-v2 ComboFirmware Bmc Uefi     new Intel QuickAssist Technology driver for Microsoft Windows Intel QuickAssist Technology driver Hewlett Packard Enterprise Microsoft Windows Server 2022 Microsoft Windows Server 2025 Server Driver - Security English (US) Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.

    ]]>         8086 4944 8086 0000 8086 4945 8086 0000 cpqsetup.exe Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot. 600 %systemroot%\system32\drivers cp063537.exe cp063537.exe file://./packages/cp063537.exe cp063537.xml cpqsetup.exe install.xml IntelQAT.msi multisetup.dll QatSetup.exe     new Universal Firmware Package for Drives - MO000800KYDZK, MO001600KYDZR, MO003200KYDZT, MO006400KYDZU, VO000960KYDZH, VO001920KYDZL, VO003840KYDZN, VO001536KYDZQ and VO007680KYDZP Universal Firmware Package for Drives - MO000800KYDZK, MO001600KYDZR, MO003200KYDZT, MO006400KYDZU, VO000960KYDZH, VO001920KYDZL, VO003840KYDZN, VO001536KYDZQ and VO007680KYDZP Hewlett Packard Enterprise Microsoft Windows Server 2022 SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server Storage Firmware - PCIe NVMe Storage Disk English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         MO006400KYDZU MO003200KYDZT MO001600KYDZR MO000800KYDZK VO007680KYDZP VO003840KYDZN VO001920KYDZL VO000960KYDZH VO001536KYDZQ Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme Micron_7500_Micron_7500_M7500ALLHPK1.fwpkg Micron_7500_Micron_7500_M7500ALLHPK1.fwpkg file://./packages/Micron_7500_Micron_7500_M7500ALLHPK1.fwpkg Micron_7500_Micron_7500_M7500ALLHPK1.HPb Micron_7500_Micron_7500_M7500ALLHPK1.xml payload.json f6de0320-2e0f-489a-b238-6dd8ae7c3811 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 4d2340a5-304f-3030-3830-304b59445a4b HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 4d2340a5-304f-3130-3630-304b59445a52 HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 4d2340a5-304f-3330-3230-304b59445a54 HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 4d2340a5-304f-3630-3430-304b59445a55 HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 562340a5-304f-3030-3936-304b59445a48 HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 562340a5-304f-3130-3533-364b59445a51 HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 562340a5-304f-3130-3932-304b59445a4c HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 562340a5-304f-3330-3834-304b59445a4e HPK1 Micron-7500-NVMe 0 True Micron_7500_Micron_7500_M7500ALLHPK1.HPb 120 1 True True True Firmware True 562340a5-304f-3730-3638-304b59445a50 HPK1 FWPKG-v2 ComboFirmware Bmc Uefi     new Intel ice Drivers for Red Hat Enterprise Linux 9 Intel ice Drivers for Red Hat Enterprise Linux 9 Red Hat Enterprise Linux 9 Server ServerOptions Networking Server Driver - Network English (US) The binary RPM package(s) provided by this product are pre-compiled kernel module drivers built specifically for the default inbox kernel (stock kernel) that ships with the Linux distribution.  HPE has tested and approved these pre-compiled kernel module RPMs for use with the specified kernel. 

    These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.

    To find the location of the driver source RPM, execute the following command for the kernel module driver RPM:  localhost> rpm -qpi <kernel module driver name>.rpm

    ]]>         8086 1592 8086 0002 8086 1592 8086 0006 8086 159B 8086 0003 8086 159B 8086 0005 8086 1593 8086 0005 8086 1592 8086 000E 8086 1593 8086 000C 8086 1593 8086 000E Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot. 0 software:rpm software:rpm kmod-ice-1.15.4-1.rhel9u4.x86_64.rpm kmod-ice-1.15.4-1.rhel9u3.x86_64.rpm file://./packages/kmod-ice-1.15.4-1.rhel9u3.x86_64.rpm ./etc/depmod.d/ice.conf ./etc/dracut.conf.d/ice-oob.conf ./lib/firmware/updates/intel/ice/ddp/LICENSE ./lib/firmware/updates/intel/ice/ddp/ice-1.3.36.0.pkg ./lib/firmware/updates/intel/ice/ddp/ice.pkg ./lib/modules/5.14.0-362.8.1.el9_3.x86_64 ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra/ice ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra/ice/ice.ko ./usr/lib/.build-id ./usr/lib/.build-id/49 ./usr/lib/.build-id/49/f350600c7b9946d36386c36a6465afe7dbd286 ./usr/share/doc/ice ./usr/share/doc/ice/COPYING ./usr/share/doc/ice/README ./usr/share/doc/ice/pci.updates ./usr/share/man/man7/ice.7.gz ./usr/share/smartupdate/kmod-ice/component.xml kmod-ice-1.15.4-1.rhel9u4.x86_64.rpm file://./packages/kmod-ice-1.15.4-1.rhel9u4.x86_64.rpm ./etc/depmod.d/ice.conf ./etc/dracut.conf.d/ice-oob.conf ./lib/firmware/updates/intel/ice/ddp/LICENSE ./lib/firmware/updates/intel/ice/ddp/ice-1.3.36.0.pkg ./lib/firmware/updates/intel/ice/ddp/ice.pkg ./lib/modules/5.14.0-427.13.1.el9_4.x86_64 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/ice ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/ice/ice.ko ./usr/lib/.build-id ./usr/lib/.build-id/66 ./usr/lib/.build-id/66/6e39b0a7a0c69c61650e0c1b31a7b0c90296c5 ./usr/share/doc/ice ./usr/share/doc/ice/COPYING ./usr/share/doc/ice/README ./usr/share/doc/ice/pci.updates ./usr/share/man/man7/ice.7.gz ./usr/share/smartupdate/kmod-ice/component.xml     new Universal Firmware Package for Drives - MO000800KXPRV, MO001600KXPTR, MO003200KXPTT, MO006400KXPTU, VO000960KXPRU, VO001920KXPTN, VO003840KXPTP and VO007680KXPTQ Universal Firmware Package for Drives - MO000800KXPRV, MO001600KXPTR, MO003200KXPTT, MO006400KXPTU, VO000960KXPRU, VO001920KXPTN, VO003840KXPTP and VO007680KXPTQ Hewlett Packard Enterprise Microsoft Windows Server 2022 SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server Storage Firmware - PCIe NVMe Storage Disk English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         Release Version and/or Date:
             HPK2

    Last Recommended or Critical Version:
         HPK0

    Previous Version of Firmware:
         HPK0

     

    ]]>         MO000800KXPRV MO001600KXPTR MO003200KXPTT MO006400KXPTU VO000960KXPRU VO001920KXPTN VO003840KXPTP VO007680KXPTQ Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme SKHynix_PE81X0_KPE81X0AHPK2.fwpkg SKHynix_PE81X0_KPE81X0AHPK2.fwpkg file://./packages/SKHynix_PE81X0_KPE81X0AHPK2.fwpkg payload.json SKHynix_PE81X0_KPE81X0AHPK2.HPb SKHynix_PE81X0_KPE81X0AHPK2.xml f6de0320-2e0f-489a-b238-6dd8ae7c3811 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 4d2340a5-304f-3030-3830-304b58505256 HPK2 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 4d2340a5-304f-3130-3630-304b58505452 HPK2 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 4d2340a5-304f-3330-3230-304b58505454 HPK2 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 4d2340a5-304f-3630-3430-304b58505455 HPK2 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 562340a5-304f-3030-3936-304b58505255 HPK2 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 562340a5-304f-3130-3932-304b5850544e HPK2 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 562340a5-304f-3330-3834-304b58505450 HPK2 SKHynix-PE81X0-NVMe 0 True SKHynix_PE81X0_KPE81X0AHPK2.HPb 120 1 True True True Firmware True 562340a5-304f-3730-3638-304b58505451 HPK2 FWPKG-v2 ComboFirmware Bmc Uefi     new iLO 6 Automatic Server Recovery Driver for Microsoft Windows Server 2022 iLO 6 Automatic Server Recovery Driver Hewlett Packard Enterprise Microsoft Windows Server 2022 Lights Out Server Driver - System Management English (US) Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         103c 3306 1590 00E4 cpqsetup.exe Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 600 %systemroot%\system32\drivers cp063538.exe cp063538.exe file://./packages/cp063538.exe cp063538.xml cpqsetup.exe generic.dll install.xml nechesasr.cat nechesasr.inf nechesasr.sys scripts/ scripts/Get-AsrSettings.ps1 scripts/Set-AsrPreTimeoutNMI.ps1 scripts/Set-AsrTimeout.ps1     new Firmware Package - UBM6 Backplane PIC PLDM Firmware for Gen10/Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM6 Backplane PIC PLDM Firmware for Gen10/Gen10P/Gen11/Gen12 servers usage Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server Microsoft Windows Server 2025 ServerOptions Server Firmware - System English (US)
  • iLO 6 version 1.62 or later is required for Gen12 servers
  • iLO 6 version 1.10 or later is required for Gen11 servers
  • iLO 5 version 2.72 or later is required for Gen10P servers
    • ]]>         Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

        localhost OS example:
        ilorest flashfwpkg <file_name.fwpkg> 

        remote example:
        ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

        Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

         Update the firmware and software in the usual manner.

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    ]]>         9675b54e-1c96-44c3-a7a1-901506000000 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:sd:ubm HPE_UBM6_1.04_B.fwpkg HPE_UBM6_1.04_B.fwpkg file://./packages/HPE_UBM6_1.04_B.fwpkg HPE_UBM6_1.04_B.HPb HPE_UBM6_1.04_B.xml payload.json 4149ebb7-d64b-4654-b679-4280f349ea50 UBM6 Backplane PIC 0 True HPE_UBM6_1.04_B.HPb 600 1 True False False True Firmware True 9675b54e-1c96-44c3-a7a1-901506000000 1.04 FWPKG-v2 Firmware Bmc     new Firmware Package - UBM4 Backplane PIC PLDM Firmware for Gen10P/Gen11/Gen12 servers usage Firmware Package - UBM4 Backplane PIC PLDM Firmware for Gen10P/Gen11/Gen12 servers usage Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server Microsoft Windows Server 2025 ServerOptions Server Firmware - System English (US)
  • iLO 6 version 1.62 or later is required for Gen12 servers
  • iLO 6 version 1.10 or later is required for Gen11 servers
  • iLO 5 version 2.72 or later is required for Gen10 Plus servers
    • ]]>         Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

        localhost OS example:
        ilorest flashfwpkg <file_name.fwpkg> 

        remote example:
        ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

        Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

         Update the firmware and software in the usual manner.

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    ]]>         9675b54e-1c96-44c3-a7a1-901504000000 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:sd:ubm HPE_UBM4_1.24_G.fwpkg HPE_UBM4_1.24_G.fwpkg file://./packages/HPE_UBM4_1.24_G.fwpkg HPE_UBM4_1.24_G.HPb HPE_UBM4_1.24_G.xml payload.json 4149ebb7-d64b-4654-b679-4280f349ea50 UBM4 Backplane PIC 0 True HPE_UBM4_1.24_G.HPb 600 1 True False False True Firmware True 9675b54e-1c96-44c3-a7a1-901504000000 1.24 FWPKG-v2 Firmware Bmc     new iLO 6 Automatic Server Recovery Driver for Microsoft Windows Server 2025 iLO 6 Automatic Server Recovery Driver Hewlett Packard Enterprise Microsoft Windows Server 2025 Lights Out Server Driver - System Management English (US) Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         103c 3306 1590 00E4 cpqsetup.exe Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 600 %systemroot%\system32\drivers cp063548.exe cp063548.exe file://./packages/cp063548.exe cp063548.xml cpqsetup.exe generic.dll install.xml nechesasr.cat nechesasr.inf nechesasr.sys scripts/ scripts/Get-AsrSettings.ps1 scripts/Set-AsrPreTimeoutNMI.ps1 scripts/Set-AsrTimeout.ps1     new Intel Firmware Package For E810-2CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter Intel Firmware Package For E810-2CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.

    Additional Information:

    • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
    ]]>         This software package contains the following firmware versions for the below listed supported network adapters:

    NIC EEPROM ID OROM Version NVM Version
    Intel E810-2CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter 8001E8B6 1.3682.0 4.60

    In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.6

    ]]>         8086 1592 8086 000E Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_2CQDA2_O_SEC_4p60_PLDMoMCTP_8001E8B6.fwpkg HPE_E810_2CQDA2_O_SEC_4p60_PLDMoMCTP_8001E8B6.fwpkg file://./packages/HPE_E810_2CQDA2_O_SEC_4p60_PLDMoMCTP_8001E8B6.fwpkg HPE_E810_2CQDA2_O_SEC_4p60_PLDMoMCTP_8001E8B6.HPb HPE_E810_2CQDA2_O_SEC_4p60_PLDMoMCTP_8001E8B6.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-2CQDA2 adapter 0 True HPE_E810_2CQDA2_O_SEC_4p60_PLDMoMCTP_8001E8B6.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-8086-15928086000e 4.60 FWPKG-v2 Firmware Bmc     changed Agentless Management Service (iLO5, iLO 6) for SUSE Linux Enterprise Server 15 ams_sles15 Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Lights Out Server Software - System Management English (US)

  • amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.

  • amsd provides information to the iLO 5 and iLO 6 service providing SNMP support.

    • ]]>         Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

    • To install the package type:
      • rpm -Uvh amsd-<version>.rpm
    • To check whether the package is loaded properly type:
      • systemctl status amsd
      • systemctl status smad
    • Additional help is available by typing:
      • man amsd
    ]]>         103C 3307 1590 00E4 103C 3306 1590 00E4 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 2f317b9d-c9e3-4d76-bff6-b9d0d085a952 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm amsd-3.8.0-1813.3.sles15.x86_64.rpm amsd-3.8.0-1813.3.sles15.x86_64.rpm file://./packages/amsd-3.8.0-1813.3.sles15.x86_64.rpm ./etc/sysconfig/ahslog ./etc/sysconfig/amsd ./etc/sysconfig/amsd_rev ./etc/sysconfig/cpqFca ./etc/sysconfig/cpqFca_rev ./etc/sysconfig/cpqIde ./etc/sysconfig/cpqIde_rev ./etc/sysconfig/cpqScsi ./etc/sysconfig/cpqScsi_rev ./etc/sysconfig/cpqiScsi ./etc/sysconfig/mr_cpqScsi ./etc/sysconfig/mr_cpqScsi_rev ./etc/sysconfig/smad ./etc/sysconfig/smad_rev ./opt/amsd ./opt/amsd/amsd.license ./sbin/ahslog ./sbin/cpqiScsi ./usr/lib/systemd/system/ahslog.service ./usr/lib/systemd/system/amsd.service ./usr/lib/systemd/system/amsd_rev.service ./usr/lib/systemd/system/cpqFca.service ./usr/lib/systemd/system/cpqFca_rev.service ./usr/lib/systemd/system/cpqIde.service ./usr/lib/systemd/system/cpqIde_rev.service ./usr/lib/systemd/system/cpqScsi.service ./usr/lib/systemd/system/cpqScsi_rev.service ./usr/lib/systemd/system/cpqiScsi.service ./usr/lib/systemd/system/mr_cpqScsi.service ./usr/lib/systemd/system/mr_cpqScsi_rev.service ./usr/lib/systemd/system/smad.service ./usr/lib/systemd/system/smad_rev.service ./usr/lib/udev/rules.d/81-cpqFca.rules ./usr/lib/udev/rules.d/81-cpqiScsi.rules ./usr/share/man/man8/ahslog.8.gz ./usr/share/man/man8/amsd.8.gz ./usr/share/man/man8/cpqFca.8.gz ./usr/share/man/man8/cpqIde.8.gz ./usr/share/man/man8/cpqScsi.8.gz ./usr/share/man/man8/cpqiScsi.8.gz ./usr/share/man/man8/mr_cpqScsi.8.gz ./usr/share/man/man8/smad.8.gz ./usr/share/smartupdate/amsd/component.xml ./sbin/amsd ./sbin/amsd_rev ./sbin/cpqFca ./sbin/cpqFca_rev ./sbin/cpqIde ./sbin/cpqIde_rev ./sbin/cpqScsi ./sbin/cpqScsi_rev ./sbin/mr_cpqScsi ./sbin/mr_cpqScsi_rev ./sbin/smad ./sbin/smad_rev     new Intel Firmware Package For E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter Intel Firmware Package For E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.

    Additional Information:

    • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
    ]]>         This software package contains the following firmware versions for the below listed supported network adapters:

    NIC EEPROM ID OROM Version NVM Version
    Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter 8001E8B5 1.3682.0 4.60

    In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.6

    ]]>         8086 1592 8086 0006 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_CQDA2_OCP_4p60_NCSIwPLDMoMCTP_8001E8B5.fwpkg HPE_E810_CQDA2_OCP_4p60_NCSIwPLDMoMCTP_8001E8B5.fwpkg file://./packages/HPE_E810_CQDA2_OCP_4p60_NCSIwPLDMoMCTP_8001E8B5.fwpkg HPE_E810_CQDA2_OCP_4p60_NCSIwPLDMoMCTP_8001E8B5.HPb HPE_E810_CQDA2_OCP_4p60_NCSIwPLDMoMCTP_8001E8B5.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-CQDA2 OCP3 adapter 0 True HPE_E810_CQDA2_OCP_4p60_NCSIwPLDMoMCTP_8001E8B5.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-8086-159280860006 4.60 FWPKG-v2 Firmware Bmc     changed Integrated Smart Update Tools for Linux x64 Integrated Smart Update Tools for Linux Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server ServerOptions Lights Out Server Application - System Management English (US) For prerequisite information, please see the iSUT Release Notes.

    ]]>         Download the rpm package to a directory on your hard drive and change to that directory. Install by typing rpm -Uvh hpsut-XXX.x86_64.rpm.

    ]]>         103C 3307 1590 00E4 103C 3307 0000 0000 103C 3306 1590 00E4 103C 3306 0000 0000 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 0 software:rpm sut-5.3.0-10.linux.x86_64.rpm Enter Polling interval in minutes. Minimum 5 minutes Maximum 1440 minutes. 0 12 0-9 * Mode in which SUT runs. 0 24 * * Enter the directory where the staging has to be done. The default path for staging directory is /var/tmp/sut/stagingdirectory. 0 255 0..9A..Z;a..z;-/ * sut-5.3.0-10.linux.x86_64.rpm file://./packages/sut-5.3.0-10.linux.x86_64.rpm ./opt/hp/hpsut/README.txt ./opt/sut/README.txt ./opt/sut/bin/gatherlogs.sh ./opt/sut/bin/hpsut ./opt/sut/bin/sut ./opt/sut/bin/x64/sum_drop_table_x64 ./opt/sut/config/sut_cfg_default.dat ./opt/sut/doc/OnDemandHelp.txt ./opt/sut/schemas/SUT.json ./opt/sut/schemas/SUTProvider.json ./opt/sut/schemas/SUTProvider_Gen10.json ./opt/sut/schemas/SUTRegistryEN_Legacy_zipped.json.gz ./opt/sut/schemas/SUTRegistryEN_Redfish.json ./opt/sut/schemas/SUTRegistryEN_Redfish_zipped.json.gz ./opt/sut/schemas/SUTRegistryJP_Legacy_zipped.json.gz ./opt/sut/schemas/SUTRegistryJP_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSettings.json ./opt/sut/schemas/SUTSettingsSchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSettingsSchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTSettings_Gen10.json ./opt/sut/schemas/SUTSystemInventorySchema_Legacy_zipped.json.gz ./opt/sut/schemas/SUTSystemInventorySchema_Redfish_zipped.json.gz ./opt/sut/schemas/SUTTasksettings.json ./opt/sut/schemas/SUTTasksettings_Legacy_zipped.json.gz ./opt/sut/schemas/SUTTasksettings_Redfish_zipped.json.gz ./opt/sut/schemas/SUT_Gen10.json ./opt/sut/scripts/sut.service ./opt/sut/scripts/sutd ./usr/lib/.build-id ./usr/lib/.build-id/57 ./usr/lib/.build-id/57/374c6b2b55c3ea60f4ebaa7dfd1667b9b459f6 ./usr/lib/.build-id/7c ./usr/lib/.build-id/7c/d01fe263104c65c66707eca3d31d173f66dc7e ./usr/share/man/man8/sut.8.gz ./usr/share/smartupdate/sut/component.xml     new HPE Gen11 Agentless Management Service for Microsoft Windows x64 Agentless Management Service Hewlett Packard Enterprise Microsoft Windows Server 2022 Microsoft Windows Server 2025 Lights Out Server Software - System Management English (US),Japanese The Channel Interface Driver for Windows X64 must be installed prior to this component.

    Microsoft SNMP Service must be enabled, if SMA (System Management Assistant) is enabled.

    ]]>         Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the service installation.

    ]]>
  • IML events marked as repaired in ILO will not be mirrored in Windows Event Log.
  • Recommend user enables code integrity policy after AMS installed.
  • If Windows Server 2016 Device Guard policy is enabled, AMS can be upgraded from an older version to a newer version,  but it cannot be uninstalled.  To uninstall AMS, the Device Guard policy needs to be temporarily disabled.
  • AMS Control Panel applet “SNMP” tab does not show SNMP settings and does not allow test trap generation
      when iLO6 encryption is set to SuiteB NSA mode.  Please use iLO6->Management page as an alternate option
  • AMS may exhibit slow memory consumption increase in Windows Task Manager. This is due to known WMI (Windows Management Instrumentation) issue in Microsoft Windows. It is expected be fixed in future Microsoft Windows updates or versions. To slow down memory consumption either:

    •              1. Restart  the AMS service (type 'net stop ams' followed by 'net start ams' in a command prompt) ...OR...

                 2. Create a new DWORD registry value named PollInterval in registry's HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hpeams\Parameters and set its value to higher than decimal 300. This value will determine  how often (in seconds) AMS reads data from WMI.

    ]]>         103c 3307 1590 00E4 103c 3306 1590 00E4 cpqsetup.exe /verbose_log Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 300 %ProgramFiles%\OEM\AMS\service cp064623.exe cp064623.exe file://./packages/cp064623.exe ams.cab ams.msi cp064623.xml cpqsetup.exe install.xml multisetup.dll SmaInstall.cab VC_redist.x64.exe     new Universal Firmware Package for Drives - MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO001920KYDMT, VO003840KYDMV, VO007680KYDNA and VO015360KYDNB Universal Firmware Package for Drives - MO001600KYDMU, MO003200KYDNC, MO006400KYDND, VO001920KYDMT, VO003840KYDMV, VO007680KYDNA and VO015360KYDNB Hewlett Packard Enterprise Microsoft Windows Server 2022 SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server Storage Firmware - PCIe NVMe Storage Disk English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         MO001600KYDMU MO003200KYDNC MO006400KYDND VO001920KYDMT VO003840KYDMV VO007680KYDNA VO015360KYDNB Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme Samsung_PM173X_GPM173XAHPK5.fwpkg Samsung_PM173X_GPM173XAHPK5.fwpkg file://./packages/Samsung_PM173X_GPM173XAHPK5.fwpkg payload.json Samsung_PM173X_GPM173XAHPK5.HPb Samsung_PM173X_GPM173XAHPK5.xml f6de0320-2e0f-489a-b238-6dd8ae7c3811 Samsung-PM173X-NVMe 0 True Samsung_PM173X_GPM173XAHPK5.HPb 120 1 True True True Firmware True 4d2340a5-304f-3130-3630-304b59444d55 HPK5 Samsung-PM173X-NVMe 0 True Samsung_PM173X_GPM173XAHPK5.HPb 120 1 True True True Firmware True 4d2340a5-304f-3330-3230-304b59444e43 HPK5 Samsung-PM173X-NVMe 0 True Samsung_PM173X_GPM173XAHPK5.HPb 120 1 True True True Firmware True 4d2340a5-304f-3630-3430-304b59444e44 HPK5 Samsung-PM173X-NVMe 0 True Samsung_PM173X_GPM173XAHPK5.HPb 120 1 True True True Firmware True 562340a5-304f-3130-3932-304b59444d54 HPK5 Samsung-PM173X-NVMe 0 True Samsung_PM173X_GPM173XAHPK5.HPb 120 1 True True True Firmware True 562340a5-304f-3330-3834-304b59444d56 HPK5 Samsung-PM173X-NVMe 0 True Samsung_PM173X_GPM173XAHPK5.HPb 120 1 True True True Firmware True 562340a5-304f-3730-3638-304b59444e41 HPK5 Samsung-PM173X-NVMe 0 True Samsung_PM173X_GPM173XAHPK5.HPb 120 1 True True True Firmware True 562340a5-304f-3531-3336-304b59444e42 HPK5 FWPKG-v2 ComboFirmware Bmc Uefi     new Universal Firmware Package for Drives - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Universal Firmware Package for Drives - VR000480KXNXE,VR000960KXNZU and VS001920KXNXF Hewlett Packard Enterprise Microsoft Windows Server 2022 SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server Storage Firmware - PCIe NVMe Storage Disk English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         Release Version and/or Date:
         HPK4
    Last Recommended or Critical Version:
         HPK1
    Previous Version of Firmware:
         HPK1
    Enhancements/New Features:
         None
    Problems Fixed:
         Changes and improvements that have been made in the firmware HPK4 which disable MCTP over PCIe VDM over the previous firmware.

    Known Issues:
         None

    ]]>         VR000480KXNXE VR000960KXNZU VS001920KXNXF Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme Micron_7450_M7450ALLHPK4.fwpkg Micron_7450_M7450ALLHPK4.fwpkg file://./packages/Micron_7450_M7450ALLHPK4.fwpkg Micron_7450_M7450ALLHPK4.HPb Micron_7450_M7450ALLHPK4.xml payload.json f6de0320-2e0f-489a-b238-6dd8ae7c3811 Micron-7450-NVMe 0 True Micron_7450_M7450ALLHPK4.HPb 120 1 True True True Firmware True 562340a5-3052-3030-3438-304b584e5845 HPK4 Micron-7450-NVMe 0 True Micron_7450_M7450ALLHPK4.HPb 120 1 True True True Firmware True 562340a5-3052-3030-3936-304b584e5a55 HPK4 Micron-7450-NVMe 0 True Micron_7450_M7450ALLHPK4.HPb 120 1 True True True Firmware True 562340a5-3053-3130-3932-304b584e5846 HPK4 FWPKG-v2 ComboFirmware Bmc Uefi     new Broadcom NetXtreme-E Driver for Microsoft Windows Server 2022 Broadcom NetXtreme-E Driver for Microsoft Windows Server 2022 Hewlett Packard Enterprise Microsoft Windows Server 2022 ServerOptions Networking Server Driver - Network English (US),Japanese From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> 14E4 16D7 14E4 1597 14E4 16D7 14E4 1596 14E4 16D8 14E4 1593 14E4 16D8 14E4 1592 14E4 16D6 14E4 1595 14E4 16D6 14E4 1594 14E4 16C5 14E4 1593 14E4 16C5 14E4 1592 14E4 16C5 0000 0000 14E4 16BD 14E4 1593 14E4 16BD 14E4 1592 14E4 16BD 0000 0000 14E4 16BD 14E4 1595 14E4 16BD 14E4 1594 14E4 16BD 14E4 1597 14E4 16BD 14E4 1596 14E4 16C5 14E4 1595 14E4 16C5 14E4 1594 14E4 16C5 14E4 1597 14E4 16C5 14E4 1596 14E4 16EE 14E4 1593 14E4 16EE 14E4 1592 14E4 16EF 14E4 1593 14E4 16EF 14E4 1592 14E4 16EB 14E4 1595 14E4 16EB 14E4 1594 14E4 16ED 14E4 1597 14E4 16ED 14E4 1596 14E4 16DE 14E4 1595 14E4 16DE 14E4 1594 14E4 16EC 14E4 1597 14E4 16EC 14E4 1596 14E4 16DC 14E4 16D8 14E4 16DC 14E4 16D6 14E4 16DC 14E4 16D7 14E4 16DC 14E4 1593 14E4 16DC 14E4 1592 14E4 16C1 14E4 1593 14E4 16C1 14E4 1592 14E4 16C1 14E4 1595 14E4 16C1 14E4 1594 14E4 16C1 14E4 1597 14E4 16C1 14E4 1596 14E4 16DC 14E4 1595 14E4 16DC 14E4 1594 14E4 16DC 14E4 1597 14E4 16DC 14E4 1596 14e4 1808 14e4 1599 14e4 1808 14e4 1598 14e4 1809 14e4 1599 14e4 1809 14e4 1598 14e4 1801 14e4 1599 14e4 1801 14e4 1598 14e4 1804 14e4 1599 14e4 1804 14e4 1598 14e4 1806 14e4 1751 14e4 1806 14e4 1599 14e4 1806 14e4 1598 14e4 1807 14e4 1599 14e4 1807 14e4 1598 14E4 1751 14E4 1599 14E4 1751 14E4 1598 14E4 1808 0000 0000 14E4 1809 0000 0000 cpqsetup.exe Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 360 %systemroot%\system32\drivers cp063633.exe cp063633.exe file://./packages/cp063633.exe bnxtnd.cat bnxtnd.inf bnxtnd.sys cp063633.xml cpqsetup.exe cp_data.xml install.xml nicdrvr.dll new Firmware Package - UBM10 Backplane PIC PLDM Firmware Firmware Package - UBM10 Backplane PIC PLDM Firmware Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server ServerOptions Server Firmware - System English (US) 9675b54e-1c96-44c3-a7a1-90150A000000 Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 600 firmware:sd:ubm HPE_UBM10_0.30_A.fwpkg HPE_UBM10_0.30_A.fwpkg file://./packages/HPE_UBM10_0.30_A.fwpkg HPE_UBM10_0.30_A.HPb HPE_UBM10_0.30_A.xml payload.json 4149ebb7-d64b-4654-b679-4280f349ea50 UBM10 Backplane PIC 0 True HPE_UBM10_0.30_A.HPb 600 1 True False False True Firmware True 9675b54e-1c96-44c3-a7a1-90150a000000 0.30 FWPKG-v2 Firmware Bmc new ROM Flash Firmware Package - HPE ProLiant Compute XD230 (U66) Servers HPE ProLiant Compute XD230 (U66) Servers Hewlett Packard Enterprise Server BIOS - System ROM English (US) To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>


    This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately.

    ]]>         cpqsetup.exe Reboot is required after installation for updates to take effect and hardware stability to be maintained. 300 firmware:system U66_1.20_01_17_2025.fwpkg U66_1.20_01_17_2025.fwpkg file://./packages/U66_1.20_01_17_2025.fwpkg payload.json U66_1.20_01_17_2025.signed.flash U66_1.20_01_17_2025.xml aa148d2e-6e09-453e-bc6f-63baa5f5ccc4 System BIOS - U66 0 True U66_1.20_01_17_2025.signed.flash 300 1 False True True False Firmware True 00000000-0000-0000-0000-000000000274 v1.20 (01/17/2025) FWPKG-v2 Firmware Bmc     new Intel Firmware Package For E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter Intel Firmware Package For E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See https://support.hpe.com to find and download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.

    Additional Information:

    • When update firmware, refer to Revision History and update it to the version as stepping up or down the ladder until the version needed.
    ]]>         This software package contains the following firmware versions for the below listed supported network adapters:

    NIC EEPROM ID OROM Version NVM Version
    Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter 8001E8B0 1.3682.0 4.60

    In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.6

    ]]>         8086 159B 8086 0005 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic HPE_E810_XXVDA2_SD_OCP_4p60_NCSIwPLDMoMCTP_8001E8B0.fwpkg HPE_E810_XXVDA2_SD_OCP_4p60_NCSIwPLDMoMCTP_8001E8B0.fwpkg file://./packages/HPE_E810_XXVDA2_SD_OCP_4p60_NCSIwPLDMoMCTP_8001E8B0.fwpkg HPE_E810_XXVDA2_SD_OCP_4p60_NCSIwPLDMoMCTP_8001E8B0.HPb HPE_E810_XXVDA2_SD_OCP_4p60_NCSIwPLDMoMCTP_8001E8B0.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb Intel E810-XXVDA2 OCP3 adapter 0 True HPE_E810_XXVDA2_SD_OCP_4p60_NCSIwPLDMoMCTP_8001E8B0.HPb 360 1 True True False True Firmware True a6b1a447-382a-5a4f-8086-159b80860005 4.60 FWPKG-v2 Firmware Bmc     new Firmware Package - HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r Firmware Package - HPE Gen11 Boot Controller NS204i-u, NS204i-d and HPE Gen10 Plus Boot Controller NS204i-p, NS204i-d, NS204i-t, NS204i-r Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server Microsoft Windows Server 2025 Storage Server Firmware - Storage Controller English (US)
  • iLO 6 version 1.10 or later is required for Gen11 servers.
  • iLO 5 version 2.81 or later is required for Gen10/Gen10 Plus servers
    • ]]>         Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See iLO Restful Interface tool to download the latest version of the iLOrest tool.

        localhost OS example:
        ilorest flashfwpkg <file_name.fwpkg> 

        remote example:
        ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

        Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

         Update the firmware and software in the usual manner.

         Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         1B4B 2241 1590 0379 1B4B 2241 1590 02F6 1B4B 2241 1590 0380 1B4B 2241 1590 0310 1B4B 2241 1590 030E 1B4B 2241 1590 030F Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware firmware firmware firmware firmware firmware HPE_NS204i_Gen10p_Gen11_1.2.14.1018_B.fwpkg HPE_NS204i_Gen10p_Gen11_1.2.14.1018_B.fwpkg file://./packages/HPE_NS204i_Gen10p_Gen11_1.2.14.1018_B.fwpkg HPE_NS204i_Gen10p_Gen11_1.2.14.1018_B.HPb HPE_NS204i_Gen10p_Gen11_1.2.14.1018_B.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb HPE_NS204i_Gen10P_Gen11_1.2.14.1018 0 True HPE_NS204i_Gen10p_Gen11_1.2.14.1018_B.HPb 120 1 True True True Firmware True a6b1a447-382a-5a4f-1b4b-224115900379 1.2.14.1018 HPE_NS204i_Gen10P_Gen11_1.2.14.1018 0 True HPE_NS204i_Gen10p_Gen11_1.2.14.1018_B.HPb 120 1 True True True Firmware True a6b1a447-382a-5a4f-1b4b-224115900380 1.2.14.1018 HPE_NS204i_Gen10P_Gen11_1.2.14.1018 0 True HPE_NS204i_Gen10p_Gen11_1.2.14.1018_B.HPb 120 1 True True True Firmware True a6b1a447-382a-5a4f-1b4b-2241159002f6 1.2.14.1018 HPE_NS204i_Gen10P_Gen11_1.2.14.1018 0 True HPE_NS204i_Gen10p_Gen11_1.2.14.1018_B.HPb 120 1 True True True Firmware True a6b1a447-382a-5a4f-1b4b-22411590030e 1.2.14.1018 HPE_NS204i_Gen10P_Gen11_1.2.14.1018 0 True HPE_NS204i_Gen10p_Gen11_1.2.14.1018_B.HPb 120 1 True True True Firmware True a6b1a447-382a-5a4f-1b4b-22411590030f 1.2.14.1018 HPE_NS204i_Gen10P_Gen11_1.2.14.1018 0 True HPE_NS204i_Gen10p_Gen11_1.2.14.1018_B.HPb 120 1 True True True Firmware True a6b1a447-382a-5a4f-1b4b-224115900310 1.2.14.1018 1.0.14.1063 FWPKG-v2 ComboFirmware Bmc     new Matrox G200eH3 Video Controller Driver for Microsoft Windows Server 2019, 2022 and 2025 Matrox G200eH3 Video Controller Driver for Microsoft Windows Hewlett Packard Enterprise Microsoft Windows Server 2022 Microsoft Windows Server 2025 ServerOptions Server Driver - Video English (US) Place the Smart Component in a temporary directory, then double-click it to run.

    Select "Install" to start extracting to a temporary location on the hard drive.

    Click the "Install" button to perform the driver installation.

    ]]>         102B 0538 1590 00E4 102B 0538 1590 027F cpqsetup.exe Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot. 60 %systemroot%\system32\drivers cp063549.exe cp063549.exe file://./packages/cp063549.exe cp063549.xml cpqsetup.exe generic.dll install.xml Matrox.WddmUninstaller.exe mxg200eh.cat MxG200eH.inf MxG2hDO64.sys     new Intel iavf Driver for Windows Server 2022 Intel iavf Driver for Windows Server 2022 Hewlett Packard Enterprise Microsoft Windows Server 2022 Networking Server Driver - Network English (US),Japanese This driver requires host driver version the following:

    • Intel i40ea Driver version 1.19.165.0 or later.
    • Intel icea Driver version 1.15.121.0 or later.
    ]]>

    From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.
    ]]> 8086 1889 8086 0001 8086 1571 8086 0001 8086 154c 8086 0000 8086 1889 8086 0000 8086 1571 0000 0000 8086 37CD 8086 0001 cpqsetup.exe Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 300 %systemroot%\System32\DriverStore\FireRepository\iavf.inf_amd64_7854544ffd52cc6a cp063716.exe cp063716.exe file://./packages/cp063716.exe cp063716.xml cpqsetup.exe cp_data.xml iavf.cat iavf.inf iavf.sys iavfmsg.dll install.xml manifest_iavf.man nicdrvr.dll new Intel ice Drivers for SUSE Linux Enterprise Server 15 Intel ice Drivers for SUSE Linux Enterprise Server 15 SUSE Linux Enterprise Server 15 ServerOptions Networking Server Driver - Network English (US) The binary RPM package(s) provided by this product are pre-compiled kernel module drivers built specifically for the default inbox kernel (stock kernel) that ships with the Linux distribution.  HPE has tested and approved these pre-compiled kernel module RPMs for use with the specified kernel. 

    These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.

    To find the location of the driver source RPM, execute the following command for the kernel module driver RPM:  localhost> rpm -qpi <kernel module driver name>.rpm

    ]]>         8086 1593 8086 000E 8086 1592 8086 0002 8086 1592 8086 0006 8086 159B 8086 0003 8086 159B 8086 0005 8086 1593 8086 0005 8086 1592 8086 000E 8086 1593 8086 000C Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot. 0 software:rpm software:rpm ice-kmp-default-1.15.4_k6.4.0_150600.21-1.sles15sp6.x86_64.rpm ice-kmp-default-1.15.4_k5.14.21_150500.53-1.sles15sp5.x86_64.rpm file://./packages/ice-kmp-default-1.15.4_k5.14.21_150500.53-1.sles15sp5.x86_64.rpm ./etc/depmod.d/ice.conf ./etc/dracut.conf.d/ice-oob.conf ./lib/firmware/updates/intel/ice/ddp/LICENSE ./lib/firmware/updates/intel/ice/ddp/ice-1.3.36.0.pkg ./lib/firmware/updates/intel/ice/ddp/ice.pkg ./lib/modules/5.14.21-150500.53-default ./lib/modules/5.14.21-150500.53-default/updates ./lib/modules/5.14.21-150500.53-default/updates/ice ./lib/modules/5.14.21-150500.53-default/updates/ice/ice.ko ./usr/share/doc/packages/ice ./usr/share/doc/packages/ice/COPYING ./usr/share/doc/packages/ice/README ./usr/share/doc/packages/ice/pci.updates ./usr/share/man/man7/ice.7.gz ./usr/share/smartupdate/ice-kmp-default/component.xml ice-kmp-default-1.15.4_k6.4.0_150600.21-1.sles15sp6.x86_64.rpm file://./packages/ice-kmp-default-1.15.4_k6.4.0_150600.21-1.sles15sp6.x86_64.rpm ./etc/depmod.d/ice.conf ./etc/dracut.conf.d/ice-oob.conf ./lib/firmware/updates/intel/ice/ddp/LICENSE ./lib/firmware/updates/intel/ice/ddp/ice-1.3.36.0.pkg ./lib/firmware/updates/intel/ice/ddp/ice.pkg ./lib/modules/6.4.0-150600.21-default ./lib/modules/6.4.0-150600.21-default/updates ./lib/modules/6.4.0-150600.21-default/updates/ice ./lib/modules/6.4.0-150600.21-default/updates/ice/ice.ko ./usr/share/doc/packages/ice ./usr/share/doc/packages/ice/COPYING ./usr/share/doc/packages/ice/README ./usr/share/doc/packages/ice/pci.updates ./usr/share/man/man7/ice.7.gz ./usr/share/smartupdate/ice-kmp-default/component.xml     new HPE Broadcom NetXtreme-E RoCE Library for SUSE Linux Enterprise Server 15 SP6 HPE Broadcom NetXtreme-E RoCE Library for SUSE Linux Enterprise Server 15 SP6 Hewlett Packard Enterprise SUSE Linux Enterprise Server 15 ServerOptions Networking Server Driver - Network English (US) HPE Broadcom NetXtreme-E Drivers for SUSE Linux Enterprise Server 15, version 1.10.3-231.0.162.0 or later, must be installed before installing this product.

    The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.

    ]]>         rpm -ivh <bnxt_rooce >.rpm

    ]]>         14E4 16D7 1590 0211 14E4 16D7 1590 020E 14E4 16D7 14E4 1597 14E4 16D7 14E4 1596 14E4 16D8 1590 0212 14E4 16D8 1590 020C 14E4 16D7 1590 02C3 14E4 16D7 1590 02C5 14E4 16D8 14E4 1593 14E4 16D8 14E4 1592 14E4 16D6 14E4 1595 14E4 16D6 14E4 1594 14E4 16EE 1590 0212 14E4 16EE 1590 020C 14E4 16EC 1590 0211 14E4 16EC 1590 020E 14E4 16EF 1590 0212 14E4 16EF 1590 020C 14E4 16ED 1590 0211 14E4 16ED 1590 020E 14E4 16EF 14E4 1593 14E4 16EF 14E4 1592 14E4 16EB 14E4 1595 14E4 16EB 14E4 1594 14E4 16ED 14E4 1597 14E4 16ED 14E4 1596 14E4 16DE 14E4 1595 14E4 16DE 14E4 1594 14E4 16EC 14E4 1597 14E4 16EC 14E4 1596 14E4 16DC 1590 16D8 14E4 16DC 1590 16D7 14E4 16C5 0000 0000 14E4 16C5 1590 020C 14E4 16C5 1590 0211 14E4 16C5 1590 020E 14E4 16C1 1590 16D8 14E4 16BD 0000 0000 14E4 16BD 1590 020C 14E4 16BD 1590 0211 14E4 16BD 1590 020E 14E4 16EC 1590 02C3 14E4 16EC 1590 02C5 14E4 16ED 1590 02C3 14E4 16ED 1590 02C5 14E4 16DC 1590 02C3 14E4 16DC 1590 02C5 14E4 16C5 1590 02C3 14E4 16C5 1590 02C5 14E4 16C1 1590 02C3 14E4 16C1 1590 02C5 14E4 16BD 1590 02C3 14E4 16BD 1590 02C5 14e4 1801 14e4 1599 14e4 1801 14e4 1598 14e4 1804 14e4 1599 14e4 1804 14e4 1598 14E4 1751 14E4 1599 14E4 1751 14E4 1598 14E4 16C1 1590 16D7 Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot. 0 software:rpm libbnxt_re-231.0.162.0-sles15sp6.x86_64.rpm libbnxt_re-231.0.162.0-sles15sp6.x86_64.rpm file://./packages/libbnxt_re-231.0.162.0-sles15sp6.x86_64.rpm ./etc/libibverbs.d/bnxt_re.driver ./usr/lib64/libbnxt_re-231.0.162.0.so ./usr/lib64/libbnxt_re-rdmav34.so ./usr/lib64/libbnxt_re.so ./usr/share/smartupdate/libbnxt_re/component.xml     new HPE Intel iavf Drivers for Red Hat Enterprise Linux 9 HPE Intel iavf Drivers for Red Hat Enterprise Linux 9 Red Hat Enterprise Linux 9 Server ServerOptions Networking Server Driver - Network English (US) The binary RPM package(s) provided by this product are pre-compiled kernel module drivers built specifically for the default inbox kernel (stock kernel) that ships with the Linux distribution.  HPE has tested and approved these pre-compiled kernel module RPMs for use with the specified kernel. 

    These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.

    To find the location of the driver source RPM, execute the following command for the kernel module driver RPM:  localhost> rpm -qpi <kernel module driver name>.rpm

    ]]>
  • This component fallback the RPM format to old version for consistency in the same OS major version.

    • * The previous web release kmod-iavf-4.9.1-1.rhel9u2.x86_64.rpm is unpublished
        - The RPM package name was changed from (hp-iavf) to (iavf). Now we revert this change from (iavf) to (hp-iavf).
        - The new RPM release is deferred to next new OS major release
    * kmod-hp-iavf and kmod-iavf are different RPM package for OS. They can be together installed in the same time.
      To avoid confusion, if you already download and install kmod-iavf-4.9.1-1.rhel9u2.x86_64.rpm, please uninstall the previous RPM by #rpm -e kmod-iavf and then install the updated RPM.

    ]]>         8086 1593 8086 000E 8086 1592 8086 0002 8086 1592 8086 0006 8086 159B 8086 0003 8086 159B 8086 0005 8086 1593 8086 0005 8086 1592 8086 000E 8086 1593 8086 000C 8086 1572 8086 00A1 8086 37D2 1590 0218 8086 37D3 1590 0219 8086 15FF 8086 000C 8086 1572 8086 0008 8086 37D1 1590 0216 8086 37D1 1590 0217 8086 1572 103C 22FC 8086 1572 103C 22FD 8086 1581 1590 00F8 8086 37CE 1590 0215 8086 37D1 1590 0247 8086 37cd 8086 154c 8086 0000 8086 1571 8086 0001 8086 0dd5 8086 1889 8086 0001 Reboot is optional after installation. Updates will be effective after reboot. Hardware stability will be maintained without reboot. 0 software:rpm software:rpm kmod-hp-iavf-4.12.5-1.rhel9u4.x86_64.rpm kmod-hp-iavf-4.12.5-1.rhel9u3.x86_64.rpm file://./packages/kmod-hp-iavf-4.12.5-1.rhel9u3.x86_64.rpm ./etc/depmod.d/hp-iavf.conf ./etc/dracut.conf.d/hp-iavf-oob.conf ./lib/modules/5.14.0-362.8.1.el9_3.x86_64 ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra/hp-iavf ./lib/modules/5.14.0-362.8.1.el9_3.x86_64/extra/hp-iavf/iavf.ko ./usr/lib/.build-id ./usr/lib/.build-id/f8 ./usr/lib/.build-id/f8/9c3085f6be7ac363160acc866ea11f173f0621 ./usr/share/smartupdate/kmod-hp-iavf/component.xml kmod-hp-iavf-4.12.5-1.rhel9u4.x86_64.rpm file://./packages/kmod-hp-iavf-4.12.5-1.rhel9u4.x86_64.rpm ./etc/depmod.d/hp-iavf.conf ./etc/dracut.conf.d/hp-iavf-oob.conf ./lib/modules/5.14.0-427.13.1.el9_4.x86_64 ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/hp-iavf ./lib/modules/5.14.0-427.13.1.el9_4.x86_64/extra/hp-iavf/iavf.ko ./usr/lib/.build-id ./usr/lib/.build-id/97 ./usr/lib/.build-id/97/b9a05ed03b925e652dd6f493f3108fd29783ea ./usr/share/smartupdate/kmod-hp-iavf/component.xml     new Broadcom NetXtreme-E Driver for Microsoft Windows Server 2025 Broadcom NetXtreme-E Driver for Microsoft Windows Server 2025 Hewlett Packard Enterprise Microsoft Windows Server 2025 ServerOptions Networking Server Driver - Network English (US),Japanese From that drive and directory, execute the downloaded file.

    Click the "Install" button to proceed with the installation.]]> 14E4 16D7 14E4 1597 14E4 16D7 14E4 1596 14E4 16D8 14E4 1593 14E4 16D8 14E4 1592 14E4 16D6 14E4 1595 14E4 16D6 14E4 1594 14E4 16C5 14E4 1593 14E4 16C5 14E4 1592 14E4 16C5 0000 0000 14E4 16BD 14E4 1593 14E4 16BD 14E4 1592 14E4 16BD 0000 0000 14E4 16BD 14E4 1595 14E4 16BD 14E4 1594 14E4 16BD 14E4 1597 14E4 16BD 14E4 1596 14E4 16C5 14E4 1595 14E4 16C5 14E4 1594 14E4 16C5 14E4 1597 14E4 16C5 14E4 1596 14E4 16EE 14E4 1593 14E4 16EE 14E4 1592 14E4 16EF 14E4 1593 14E4 16EF 14E4 1592 14E4 16EB 14E4 1595 14E4 16EB 14E4 1594 14E4 16ED 14E4 1597 14E4 16ED 14E4 1596 14E4 16DE 14E4 1595 14E4 16DE 14E4 1594 14E4 16EC 14E4 1597 14E4 16EC 14E4 1596 14E4 16DC 14E4 16D8 14E4 16DC 14E4 16D6 14E4 16DC 14E4 16D7 14E4 16DC 14E4 1593 14E4 16DC 14E4 1592 14E4 16C1 14E4 1593 14E4 16C1 14E4 1592 14E4 16C1 14E4 1595 14E4 16C1 14E4 1594 14E4 16C1 14E4 1597 14E4 16C1 14E4 1596 14E4 16DC 14E4 1595 14E4 16DC 14E4 1594 14E4 16DC 14E4 1597 14E4 16DC 14E4 1596 14e4 1808 14e4 1599 14e4 1808 14e4 1598 14e4 1809 14e4 1599 14e4 1809 14e4 1598 14e4 1801 14e4 1599 14e4 1801 14e4 1598 14e4 1804 14e4 1599 14e4 1804 14e4 1598 14e4 1806 14e4 1751 14e4 1806 14e4 1599 14e4 1806 14e4 1598 14e4 1807 14e4 1599 14e4 1807 14e4 1598 14E4 1751 14E4 1599 14E4 1751 14E4 1598 14E4 1808 0000 0000 14E4 1809 0000 0000 cpqsetup.exe Reboot is not required after installation for updates to take effect and hardware stability to be maintained. 360 %systemroot%\system32\drivers cp063634.exe cp063634.exe file://./packages/cp063634.exe bnxtnd.cat bnxtnd.inf bnxtnd.sys cp063634.xml cpqsetup.exe cp_data.xml install.xml nicdrvr.dll new Universal Firmware Package for Drives - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Universal Firmware Package for Drives - MV003200LXUJK, MV006400LXUJL, VV003840LXUJE, VV007680LXUJF and VV015360LXUJH Hewlett Packard Enterprise Microsoft Windows Server 2022 SUSE Linux Enterprise Server 15 Red Hat Enterprise Linux 9 Server Storage Firmware - PCIe NVMe Storage Disk English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         MV003200LXUJK MV006400LXUJL VV003840LXUJE VV007680LXUJF VV015360LXUJH Reboot may be required after installation for updates to take effect and hardware stability to be maintained. 120 firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme firmware:sd:nvme Kioxia_CM7_KACM7ALEHPK5.fwpkg Kioxia_CM7_KACM7ALEHPK5.fwpkg file://./packages/Kioxia_CM7_KACM7ALEHPK5.fwpkg Kioxia_CM7_KACM7ALEHPK5.HPb Kioxia_CM7_KACM7ALEHPK5.xml payload.json f6de0320-2e0f-489a-b238-6dd8ae7c3811 Kioxia-CM7-NVMe 0 True Kioxia_CM7_KACM7ALEHPK5.HPb 120 1 True True True Firmware True 4d2340a5-3056-3330-3230-304c58554a4b HPK5 Kioxia-CM7-NVMe 0 True Kioxia_CM7_KACM7ALEHPK5.HPb 120 1 True True True Firmware True 4d2340a5-3056-3630-3430-304c58554a4c HPK5 Kioxia-CM7-NVMe 0 True Kioxia_CM7_KACM7ALEHPK5.HPb 120 1 True True True Firmware True 562340a5-3056-3330-3834-304c58554a45 HPK5 Kioxia-CM7-NVMe 0 True Kioxia_CM7_KACM7ALEHPK5.HPb 120 1 True True True Firmware True 562340a5-3056-3730-3638-304c58554a46 HPK5 Kioxia-CM7-NVMe 0 True Kioxia_CM7_KACM7ALEHPK5.HPb 120 1 True True True Firmware True 562340a5-3056-3531-3336-304c58554a48 HPK5 FWPKG-v2 ComboFirmware Bmc Uefi     new NVIDIA Firmware Package (FWPKG) for HPE InfiniBand NDR200/Ethernet 200GbE 2-port QSFP112 PCIe5 x16 MCX755106AC-HEAT Adapter : HPE part numbers P65333-B21 and P65333-H21 NVIDIA Firmware Package (FWPKG) for HPE InfiniBand NDR200/Ethernet 200GbE 2-port QSFP112 PCIe5 x16 MCX755106AC-HEAT Adapter : HPE part numbers P65333-B21 and P65333-H21 Hewlett Packard Enterprise Microsoft Windows Server 2022 Red Hat Enterprise Linux 9 Server SUSE Linux Enterprise Server 15 Networking Server Firmware - Network English (US) Flash the PLDM firmware using any below methods

    1. Flash using iLOrest tool 
    2. Flash using Smart Update Manager (SUM).
    3. Flash from iLO GUI

    1. To flash this firmware package, use the following iLOrest command.  See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.

    localhost OS example:
    ilorest flashfwpkg <file_name.fwpkg> 

    remote example:
    ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>

    2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).

    Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.

    • Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.

    • Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.

    Update the firmware and software in the usual manner.

    Reboot your system for the update to take effect immediately

    3. Flash from iLO GUI

    • Browse iLO IP using any browser and login using the credential 
    • Make sure the PLDM supported adapter is present in the server
    • Go to iLO GUI -> Click on "Firmware and OS software" from left side  -> Click on "Update Firmware" -> Click on "Choose File" and browse to the supported PLDM file -> Then click on "Flash" button. 
    • Update status will be show in the Top and a log entry can be seen in Integrated Managenment Log (IML) 
    • Reboot the server for the firmware update to take effect.
    ]]>         Validated and Supported NDR200 / 200GbE cables and transceivers:

     

    HCA to Switch:

    • P65335-B21    HPE InfiniBand NDR200/Ethernet OSFP to 4xQSFP112 1m Direct Attach Copper Cable (HCA to Switch)
    • P65335-B23    HPE InfiniBand NDR200/Ethernet OSFP to 4xQSFP112 2m Direct Attach Copper Cable (HCA to Switch)
    • P65335-B25    HPE InfiniBand NDR200/Ethernet OSFP to 4xQSFP112 3m Direct Attach Copper Cable (HCA to Switch)
    • P65340-B21    HPE InfiniBand NDR200/Ethernet OSFP to 4xQSFP112 4m Active Copper Cable (HCA to Switch)
    • P65340-B22    HPE InfiniBand NDR200/Ethernet OSFP to 4xQSFP112 5m Active Copper Cable (HCA to Switch)
    • P49766-B21        HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 3m Splitter Cable      (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
    • P49766-B22        HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 5m Splitter Cable      (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
    • P49766-B23        HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 10m Splitter Cable    (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
    • P49766-B24        HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 15m Splitter Cable    (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
    • P49766-B25        HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 20m Splitter Cable    (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)
    • P49766-B26        HPE InfiniBand NDR200/Ethernet 8 Fiber MPO to 2x4 Fiber MPO Multi-mode 30m Splitter Cable    (HCA-side Multi-mode optical fiber transceiver to Switch-side Multi-mode optical fiber transceiver)

    HCA side (QSFP112) transceiver:

    • P65334-B21        HPE InfiniBand NDR/Ethernet 400G QSFP112 MPO12 850nm Multi-mode 50m APC Transceiver

    Validated and Supported HDR cables:

    • P28169-B21    HPE InfiniBand HDR 200Gb QSFP56 to QSFP56 3m Active Optical Cable
    • P28169-B22    HPE InfiniBand HDR 200Gb QSFP56 to QSFP56 5m Active Optical Cable
    • P28169-B23    HPE InfiniBand HDR 200Gb QSFP56 to QSFP56 10m Active Optical Cable
    • P28169-B24    HPE InfiniBand HDR 200Gb QSFP56 to QSFP56 15m Active Optical Cable
    • P28169-B25    HPE InfiniBand HDR 200Gb QSFP56 to QSFP56 20m Active Optical Cable
    • P28169-B26    HPE InfiniBand HDR 200Gb QSFP56 to QSFP56 30m Active Optical Cable

    Validated and Supported HDR / 200GbE cables:

     

    HDR / 200GbE cables:

    • P06149-B21    HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 0.5m Direct Attach Copper Cable
    • P06149-B22    HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 1m Direct Attach Copper Cable
    • P06149-B23    HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 1.5m Direct Attach Copper Cable
    • P06149-B24    HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 2m Direct Attach Copper Cable
    • P06153-B21    HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 3m Active Optical Cable
    • P06153-B22    HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 5m Active Optical Cable
    • P06153-B23    HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 10m Active Optical Cable
    • P06153-B24    HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 15m Active Optical Cable
    • P06153-B25    HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 20m Active Optical Cable
    • P06153-B26    HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to QSFP56 30m Active Optical Cable

    2xHDR100 / 2x100GbE splitter cables:

    • P06248-B21    HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to 2xQSFP56 1m Splitter Direct Attach Copper Cable
    • P06248-B22    HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to 2xQSFP56 1.5m Splitter Direct Attach Copper Cable
    • P06248-B23    HPE InfiniBand HDR/Ethernet 200Gb QSFP56 to 2xQSFP56 2m Splitter Direct Attach Copper Cable
    • P26659-B21    HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 3m AO Splitter Cable
    • P26659-B22    HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 5m AO Splitter Cable
    • P26659-B23    HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 10m AO Splitter Cable
    • P26659-B24    HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 15m AO Splitter Cable
    • P26659-B25    HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 20m AO Splitter Cable
    • P26659-B26    HPE InfiniBand HDR 200Gb to HDR100/Ethernet 2x100Gb QSFP56 to 2xQSFP56 30m AO Splitter Cable

     

    Validated and Supported 10GbE Cables:

    • 10GbE    455883-B21    HPE BladeSystem c-Class 10Gb SFP+ SR Transceiver
    • 10GbE    455886-B21    HPE BladeSystem c-Class 10Gb SFP+ LR Transceiver
    • 10GbE    537963-B21    HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 5m Direct Attach Copper Cable
    • 1GbE/10GbE    487655-B21     HPE BladeSystem c-Class 10GbE SFP+ to SFP+ 3m Direct Attach Copper Cable
    • 1GbE/10GbE    655874-B21    HPE QSFP/SFP+ Adaptor Kit
    • 10GbE    813874-B21        HPE 10GBase-T SFP+ Transceiver 
    • 10GbE    838327-B21        HPE Synergy Dual 10GBASE-T QSFP+ 30m RJ45 Transceiver

    Validated and Supported 25GbE Cables:

    • 25GbE    845970-B21    HPE QSFP 28 to SFP28 Adaptor        
    • 25GbE    845416-B21    HPE 100Gb QSFP28 to 4x25Gb SFP28 3m DAC        
    • 25GbE    845420-B21    HPE QSFP28 to 4x25G SFP28 7m AOC        
    • 25GbE    845424-B21    HPE QSFP28 to 4x25Gb SFP28 15m AOC        
    • 25GbE    844483-B21    HPE 25Gb SFP28 to SFP28 7m AOC        
    • 25GbE    845396-B21    HPE 25Gb SFP28 to SFP28 15m AOC         
    • 25GbE    845398-B21    HPE 25Gb SFP28 SR 100m Transceiver   

    Validated and Supported 40GbE Cables:

    • 40GbE    720211-B21    HPE BladeSystem c-Class 40G QSFP+ to QSFP+ 15m Active Optical Cable
    • 40GbE    721076-B21    HP BLc QSFP+ to 4x10G SFP+ AOC 15m Opt  
    • 40GbE    720187-B21    HPE BladeSystem c-Class 40Gb QSFP+ MPO SR4 100m Transceiver
    • 40GbE    720193-B21    HPE BladeSystem c-Class QSFP+ to SFP+ Adapter
    • 40GbE    817040-B21    HPE Synergy 40GbE/4x10GbE/4x8Gb FC QSFP+ Transceiver
    • 40GbE    720199-B22    HPE BladeSystem c‑Class 40G QSFP+ to QSFP+ 3m Direct Attach Copper Cable
    • 40GbE    720202-B23    HPE HP BLC 40G QSFP+ QSFP+ 5M DAC Cable
    • 40GbE    721064-B21    HPE BladeSystem c‑Class 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable
    • 40GbE    841716-B21    HPE 40Gb QSFP+ Bidirectional Transceiver
    • 40GbE     JH232A         HPE X142 40G QSFP+ LC LR4 SM Transceiver

    Validated and Supported 100GbE Cables:

    • 100GBE    845408-B21    HPE 100Gb QSFP28 to QSFP28 5m DAC
    • 100GBE    845416-B21    HPE 100Gb QSFP28 to 4x25Gb SFP28 3m DAC
    • 100GbE    845406-B21    HPE 100Gb QSFP28 to QSFP28 3m DAC
    • 100GBE    845972-B21    HPE 100Gb QSFP28 Bidirectional XCVR
    • 100GBE    845410-B21    HPE 100Gb QSFP28 to QSFP28 7m AOC
    • 100GbE    845412-B21    HPE 100Gb QSFP28 to QSFP28 10m AOC
    • 100GBE    845414-B21    HPE 100Gb QSFP28 to QSFP28 15m AOC
    • 100GBE    Q8J73A        HPE Mseries 100GbE QSFP28 PSM4 500m XCVR
    • 100GBE    Q2F19A        HPE M-series 100GbE QSFP28 SR4 100m XCVR

    Validated and Supported 200GbE Cables:

    • 200GBE  R5Z76A    HPE 200Gb QSFP56 to QSFP56 0.5m Direct Attach Copper Cable
    • 200GBE  R5Z77A    HPE 200Gb QSFP56 to QSFP56 1m Direct Attach Copper Cable
    • 200GBE  R5Z78A    HPE 200Gb QSFP56 to QSFP56 2m Direct Attach Copper Cable
    • 200GBE  R5Z79A    HPE 200Gb QSFP56 to QSFP56 2.5m Direct Attach Copper Cable
    • 200GBE  R5Z80A    HPE 200Gb QSFP56 to QSFP56 5m Active Optical Cable
    • 200GBE  R5Z81A    HPE 200Gb QSFP56 to QSFP56 10m Active Optical Cable
    • 200GBE  R5Z82A    HPE 200Gb QSFP56 to QSFP56 15m Active Optical Cable
    • 200GBE  R5Z83A    HPE 200Gb QSFP56 MPO SR4 100m Transceiver
    • 200GBE    R6F24A    HPE 200Gb QSFP56 to 2x100Gb QSFP56 3m Active Optical Cable
    • 200GBE    R6F25A    HPE 200Gb QSFP56 to 2x100Gb QSFP56 5m Active Optical Cable
    • 200GBE    R6F26A    HPE 200Gb QSFP56 to 2x100Gb QSFP56 15m Active Optical Cable

    Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.

    ]]>         ven_15B3&dev_1021&subsys_005315B3 Reboot is required after installation for updates to take effect and hardware stability to be maintained. 360 firmware:nic 28_42_1000-MCX755106AC-HEAT_HPE_Ax.pldm.fwpkg 28_42_1000-MCX755106AC-HEAT_HPE_Ax.pldm.fwpkg file://./packages/28_42_1000-MCX755106AC-HEAT_HPE_Ax.pldm.fwpkg 28_42_1000-MCX755106AC-HEAT_HPE_Ax.pldm.signed 28_42_1000-MCX755106AC-HEAT_HPE_Ax.pldm.xml payload.json 79f0c163-0c13-4662-9dea-09235fef90cb HPE IB NDR200/EN 200G 2p QSFP112 Adptr 0 True 28_42_1000-MCX755106AC-HEAT_HPE_Ax.pldm.signed 360 1 True True False True Firmware True a6b1a447-382a-5a4f-15b3-102115b30053 28.42.1000 FWPKG-v2 Firmware Bmc