1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.11.00_k1_k5.14.21_150500.37-1.sles15sp5.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --force or --replacepkgs with --nodeps option
Example: rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --force --nodeps
rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --replacepkgs --nodeps
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.11.00_k1_k5.14.21_150500.37-1.sles15sp5.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --force or --replacepkgs with --nodeps option
Example: rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --force --nodeps
rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --replacepkgs --nodeps
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
追加情報：
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| HPE Ethernet 10Gb 2-port SFP+ BCM57412 Adapter | 233.0.151.0 |
233.0.151.0 |
233.0.146.0 |
233.0.146.0 |
233.0.151.0 |
| HPE Ethernet 10Gb 2-port SFP+ BCM57412 OCP3 Adapter | |||||
| HPE Ethernet 10Gb 2-port BaseT BCM57416 Adapter | |||||
| HPE Ethernet 10Gb 2-port BaseT BCM57416 OCP3 Adapter | |||||
| HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 Adapter | |||||
| HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 OCP3 Adapter |
https://www.hpe.com/global/swpublishing/MTX-0572f282f8134709b2788a1a31
]]>
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| HPE Ethernet 10Gb 2-port SFP+ BCM57412 Adapter | 233.0.151.0 |
233.0.151.0 |
233.0.146.0 |
233.0.146.0 |
233.0.151.0 |
| HPE Ethernet 10Gb 2-port SFP+ BCM57412 OCP3 Adapter | |||||
| HPE Ethernet 10Gb 2-port BaseT BCM57416 Adapter | |||||
| HPE Ethernet 10Gb 2-port BaseT BCM57416 OCP3 Adapter | |||||
| HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 Adapter | |||||
| HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 OCP3 Adapter |
https://www.hpe.com/global/swpublishing/MTX-0572f282f8134709b2788a1a31
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
[インストール]ボタンをクリックして、インストールを開始します。]]>
Click the "Install" button to proceed with the installation.]]>
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンを見つけてダウンロードするには、https://support.hpe.comを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
追加情報：
HPE Intel E810ベースのネットワークアダプターでは、ファームウェアのアップデートを試行した後にシステムを再起動する必要があります。システムを再起動せずにファームウェアを複数回アップデートすると、以前に試行したファームウェアのアップデートがキャンセルされる可能性があります。
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROMバージョン | NVMバージョン |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4ポートSFP28 MCLKアダプターfor HPE | 8002003A | 1.3755.0 | 4.71 |
| Intel E810-XXVDA4 Ethernet 10/25Gb 4ポートSFP28 MCLK NGアダプターfor HPE | 8002003A | 1.3755.0 | 4.71 |
NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.7と示されます
製品の詳細については、https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.htmlにある最新のドキュメントを参照してください。
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK Adapter for HPE | 8002003A | 1.3755.0 | 4.71 |
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK NG Adapter for HPE | 8002003A | 1.3755.0 | 4.71 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.7
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The latest Emulex FC driver 14.0.534.0 is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The latest Emulex FC driver 14.0.534.0 is available on the Service Pack for ProLiant (SPP) which is available at http://www.hpe.com/servers/spp/download/
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Problems Fixed:
The FW address PCIe link drop, Drive detection after hot re-insert on Windows, Other regular FW patch release.
Known Issues:
None
Problems Fixed:
The FW address PCIe link drop, Drive detection after hot re-insert on Windows, Other regular FW patch release.
Known Issues:
None
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
Red Hat Enterprise Linux 8 Server FC Driver Kit for HPE QLogic HBAs , version 10.02.03.03-k1.
Red Hat Enterprise Linux 9 Server FC Driver Kit for HPE QLogic HBAs , version 10.02.03.03-k1.
SUSE Linux Enterprise Server 15 FC Driver Kit for HPE QLogic HBAs, version 10.02.03.03-k1.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
Red Hat Enterprise Linux 8 Server FC Driver Kit for HPE QLogic HBAs , version 10.02.03.03-k1.
Red Hat Enterprise Linux 9 Server FC Driver Kit for HPE QLogic HBAs , version 10.02.03.03-k1.
SUSE Linux Enterprise Server 15 FC Driver Kit for HPE QLogic HBAs, version 10.02.03.03-k1.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
To uninstall the QLogic Smart SAN enablement RPM use the following command:
# rpm -e hpe-qlogic-smartsan-enablement-<version>.noarch.rpm
This is a configurable component. It requires a configuration file in order to enable/disable Smart SAN functionality. If no configuration is performed, the current Smart SAN status is stated and the execution is complete. No further action is taken.
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for ProLiant:
1. Login as the system administrator (root).
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install, type the following command at the prompt:
# rpm -ivh hpe-qlogic-smartsan-enablement-kit-<version>.x86_64.rpm
Example: # rpm -ivh hpe-qlogic-smartsan-enablement-kit-3.3-3.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Installation complete
To uninstall the QLogic Smart SAN enablement RPM use the following command:
# rpm -e hpe-qlogic-smartsan-enablement-<version>.noarch.rpm
This is a configurable component. It requires a configuration file in order to enable/disable Smart SAN functionality. If no configuration is performed, the current Smart SAN status is stated and the execution is complete. No further action is taken.
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for ProLiant:
1. Login as the system administrator (root).
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install, type the following command at the prompt:
# rpm -ivh hpe-qlogic-smartsan-enablement-kit-<version>.x86_64.rpm
Example: # rpm -ivh hpe-qlogic-smartsan-enablement-kit-3.3-3.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Installation complete
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、iLO Restfulインターフェイスツールを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See iLO Restful Interface tool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
To update the driver using VMware tools:
To update the driver using VMware tools:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
機能強化/新しい機能：
なし
修正された問題点：
キューのフル処理プロセスでエラーが見つかりました。その結果、FUAビットが適切に設定されず、ドライブの自発的なリセットを発生させる可能性があります。
キューのフル処理プロセスの間にFUAビットの処理を解決するFWの修正が実装されました。
FWは、キューのフル処理状況でドライブがリセットされる問題を解決することが確認されました。
既知の問題点：
なし
Enhancements/New Features:
None
Problems Fixed:
An error was found in the queue full handling process that results in the FUA bit not getting properly set, which could lead to the drive self-initiated reset.
The FW fix is to resolve the handling of FUA bit during the queue full handling process has been implemented.
The FW was confirmed to resolve the issue of drives resetting under queue full handling situations.
Known Issues:
None
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. RPMをご使用のローカルドライブディレクトリにダウンロードし、そのディレクトリに移動します。
3. ドライバーをインストールあるいはアップグレードするには、プロンプトで次のコマンドをタイプします。
# rpm -Uvh kmod-qla2xxx-
例：# rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel9u3.x86_64.rpm
4. インストールまたはアップグレードがエラーを出さずに完了したら、変更を有効にするためにサーバーを再起動してください。
重要：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
# rpm -e kmod-qla2xxx-
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel9u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.
NOTE: Below Points are applicable only for Intel and AMD
• Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
• The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
• The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).
Supported Utilities for RL300
Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
• RESTful Interface Tool (iLOREST) 4.8.0.0
NOTE: Below Points are applicable only for RL300
For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide
]]>NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.
NOTE: Below Points are applicable only for Intel and AMD
• Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
• The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
• The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).
Supported Utilities for RL300
Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
• RESTful Interface Tool (iLOREST) 4.8.0.0
NOTE: Below Points are applicable only for RL300
For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
インストールボタンをクリックして、インストールを開始します。
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. RPMをご使用のローカルドライブディレクトリにダウンロードし、そのディレクトリに移動します。
3. ドライバーをインストールあるいはアップグレードするには、プロンプトで次のコマンドをタイプします。
# rpm -Uvh qlgc-qla2xxx-
例：# rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.11.00.a5_k1_k1_k5.14.21_150400.22-1.sles15sp4.x86_64.rpm
4. インストールまたはアップグレードが完了した場合、以下のメッセージが表示されます：
Setup is now complete. Please REBOOT your computer NOW!!
重要：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
# rpm -e qlgc-qla2xxx-
同じドライバーバージョンの書き換えは、--forceまたは--replacepkgsと--nodepsオプションを使用して実行する必要があります
例：rpm –Uvh qlgc-qla2xxx-
rpm –Uvh qlgc-qla2xxx-
詳しくは、次のナレッジベースを参照してください。https://www.suse.com/support/kb/doc/?id=000019640
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.11.00.a5_k1_k1_k5.14.21_150400.22-1.sles15sp4.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --force or --replacepkgs with --nodeps option
Example: rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --force --nodeps
rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --replacepkgs --nodeps
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
VMware Toolsを使用してドライバーをアップデート:
HPE OneViewおよびHPE Smart Update Toolを使用してドライバーをアップデートするには。
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンを見つけてダウンロードするには、https://support.hpe.comを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
追加情報：
HPE Intel E810ベースのネットワークアダプターでは、ファームウェアのアップデートを試行した後にシステムを再起動する必要があります。システムを再起動せずにファームウェアを複数回アップデートすると、以前に試行したファームウェアのアップデートがキャンセルされる可能性があります。
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROMバージョン | NVMバージョン |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4ポートSFP28アダプター | 8002003E | 1.3755.0 | 4.71 |
NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.7と示されます
製品の詳細については、https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.htmlにある最新のドキュメントを参照してください。
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter | 8002003E | 1.3755.0 | 4.71 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.7
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
1. Flash from iLO GUI
2. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
3. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
]]>1. Flash from iLO GUI
2. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
3. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
json ファイルを fwpkg ファイルと同じフォルダーに配置します。
このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO7_IP_Address> -u <iLO7_username> -p <iLO7_password>
Place the json file in the same folder as the fwpkg file.
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
]]>1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンを見つけてダウンロードするには、https://support.hpe.comを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
追加情報：
HPE Intel E810ベースのネットワークアダプターでは、ファームウェアのアップデートを試行した後にシステムを再起動する必要があります。システムを再起動せずにファームウェアを複数回アップデートすると、以前に試行したファームウェアのアップデートがキャンセルされる可能性があります。
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROMバージョン | NVMバージョン |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2ポートQSFP28アダプター | 8002003C | 1.3755.0 | 4.71 |
NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.7と示されます
製品の詳細については、https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.htmlにある最新のドキュメントを参照してください。
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter | 8002003C | 1.3755.0 | 4.71 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.7
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
HCA対スイッチ：
HCA側トランシーバー：
注記：このセクションに記載されているのは、HPE部品番号の付いたケーブルだけです。サポートされているケーブルの完全なリストについては、ファームウェアダウンロードにバンドルされているリリースノートを参照してください。
HCA to Switch:
HCA side transceiver:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Problems Fixed:
This version of FW now supports the 15.36TB model and FW fixes of drive time-out/failures.
Known Issues:
None
Problems Fixed:
This version of FW now supports the 15.36TB model and FW fixes of drive time-out/failures.
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
To update the driver using VMware tools:
To update the driver using VMware tools:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
追加情報：
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE | 233.0.152.6 |
233.0.151.0 |
233.0.146.0 |
233.0.146.0 |
233.0.151.0 |
| Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE |
https://www.hpe.com/global/swpublishing/MTX-99a59d3b36404166b10a37a3b3
]]>
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE | 233.0.152.6 |
233.0.151.0 |
233.0.146.0 |
233.0.146.0 |
233.0.151.0 |
| Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE |
https://www.hpe.com/global/swpublishing/MTX-99a59d3b36404166b10a37a3b3
]]>
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンを見つけてダウンロードするには、https://support.hpe.comを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
追加情報：
HPE Intel E810ベースのネットワークアダプターでは、ファームウェアのアップデートを試行した後にシステムを再起動する必要があります。システムを再起動せずにファームウェアを複数回アップデートすると、以前に試行したファームウェアのアップデートがキャンセルされる可能性があります。
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROMバージョン | NVMバージョン |
|---|---|---|---|
| Intel E810-2CQDA2 Ethernet 100Gb 2ポートQSFP28アダプター | 80020037 | 1.3755.0 | 4.71 |
NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.7と示されます
製品の詳細については、https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.htmlにある最新のドキュメントを参照してください。
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-2CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter | 80020037 | 1.3755.0 | 4.71 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.7
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.
amsd provides information to the iLO 5, iLO6 and iLO 7 service providing SNMP support.
For HPE servers with iLO 7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.
amsd provides information to the iLO 5, iLO6 and iLO 7 service providing SNMP support.
For HPE servers with iLO 7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
On HPE Gen12 servers with iLO7, HPE Agentless Management Service(AMS) uses HPE iLO Virtual NIC (VNIC) to communicate with iLO. For communication using VNIC, an application account in iLO needs to be created. As part of AMS installation, the application account can be generated and the same will be stored securely in the system TPM. This is a one-time configuration.
Alternately application can be used without creating an application account. In this case, iLO credentials must be specified (using amscli) every time the OS or AMS restarts.
Installation methods:
Method 1: Non interactive installation
Login as the system administrator (root), download the RPM and install_ams.sh to a directory on your hard drive and change to that directory.
As part of the installation process, an application account will be created. If the specified iLO credentials are incorrect or if there are any VNIC-related issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
Method 2: Using rpm command
To install the package, type:
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
To check whether the package is loaded properly, type:
Additional help is available by typing:
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Type the following command:
HPE servers with iLO 5 and iLO 6:
Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.
On HPE Gen12 servers with iLO7, HPE Agentless Management Service(AMS) uses HPE iLO Virtual NIC (VNIC) to communicate with iLO. For communication using VNIC, an application account in iLO needs to be created. As part of AMS installation, the application account can be generated and the same will be stored securely in the system TPM. This is a one-time configuration.
Alternately application can be used without creating an application account. In this case, iLO credentials must be specified (using amscli) every time the OS or AMS restarts.
Installation methods:
Method 1: Non interactive installation
Login as the system administrator (root), download the RPM and install_ams.sh to a directory on your hard drive and change to that directory.
As part of the installation process, an application account will be created. If the specified iLO credentials are incorrect or if there are any VNIC-related issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
Method 2: Using rpm command
To install the package, type:
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
To check whether the package is loaded properly, type:
Additional help is available by typing:
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Type the following command:
HPE servers with iLO 5 and iLO 6:
Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンを見つけてダウンロードするには、https://support.hpe.comを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
追加情報：
HPE Intel E810ベースのネットワークアダプターでは、ファームウェアのアップデートを試行した後にシステムを再起動する必要があります。システムを再起動せずにファームウェアを複数回アップデートすると、以前に試行したファームウェアのアップデートがキャンセルされる可能性があります。
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROMバージョン | NVMバージョン |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4ポートSFP28 OCP3 | 80020035 | 1.3755.0 | 4.71 |
NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.7と示されます
製品の詳細については、https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.htmlにある最新のドキュメントを参照してください。
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 | 80020035 | 1.3755.0 | 4.71 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.7
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
最新の推奨またはクリティカルバージョン：
なし
前のファームウェアバージョン：
なし
機能強化/新しい機能：
なし
修正された問題点：
ランダム読み取り/書き込みパフォーマンスを向上します。
既知の問題点：
なし
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Enhancements/New Features:
None
Problems Fixed:
Improve random read/write perfomance.
Known Issues:
None
1. Download ".fwpkg"
2. Copy the contents from ".json" and create a file with the same name and save it in .json format [different file name and formats are not supported]
3. Place the files mentioned in 1 and 2 under the same folder
Now follow the steps mentioned in the Installation Notes for flashing the fwpkg.
Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities
for best performance:
NOTE: Below Points are applicable only for Intel
Updated utilities and system libraries are required to support the iLO Secure standard, FIPS, and CNSA security states
The iLO RESTful API is the preferred programmatic interface for Gen12 systems
The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST)
1. Download ".fwpkg"
2. Copy the contents from ".json" and create a file with the same name and save it in .json format [different file name and formats are not supported]
3. Place the files mentioned in 1 and 2 under the same folder
Now follow the steps mentioned in the Installation Notes for flashing the fwpkg.
Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities
for best performance:
NOTE: Below Points are applicable only for Intel
Updated utilities and system libraries are required to support the iLO Secure standard, FIPS, and CNSA security states
The iLO RESTful API is the preferred programmatic interface for Gen12 systems
The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST)
Download the firmware package and its corresponding json if available and ensure they are in same location.
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO7_IP_Address> -u <iLO7_username> -p <iLO7_password>
or
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg> -u <iLO7_username> -p <iLO7_password>
This firmware package can also be installed with Smart Update Manager (SUM) version 12.0.0 and later
]]>Download the firmware package and its corresponding json if available and ensure they are in same location.
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO7_IP_Address> -u <iLO7_username> -p <iLO7_password>
or
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg> -u <iLO7_username> -p <iLO7_password>
This firmware package can also be installed with Smart Update Manager (SUM) version 12.0.0 and later
]]>Check the online help for additional information about how to use features.
Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.
Check the online help for additional information about how to use features.
Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO7_IP_Address> -u <iLO7_username> -p <iLO7_password>
Place the json file in the same folder as the fwpkg file.
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO7_IP_Address> -u <iLO7_username> -p <iLO7_password>
Place the json file in the same folder as the fwpkg file.
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
最新の推奨またはクリティカルバージョン：
なし
前のファームウェアバージョン：
なし
機能強化/新しい機能:
なし
修正された問題点：
この修正は、ホストが読み取りコマンドを発行したときに、ウェアレベリングプロセスの対象ブロックで回復不能なエラーが発生する可能性がある場合に行われます。
既知の問題点:
なし
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Enhancements/New Features:
None
Problems Fixed:
This fix is for unrecovered errors may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
Known Issues:
None
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンを見つけてダウンロードするには、https://support.hpe.comを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
追加情報：
HPE Intel E810ベースのネットワークアダプターでは、ファームウェアのアップデートを試行した後にシステムを再起動する必要があります。システムを再起動せずにファームウェアを複数回アップデートすると、以前に試行したファームウェアのアップデートがキャンセルされる可能性があります。
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROMバージョン | NVMバージョン |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2ポートSFP28 OCP3アダプター | 8002003D | 1.3755.0 | 4.71 |
NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.7と示されます
製品の詳細については、https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.htmlにある最新のドキュメントを参照してください。
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter | 8002003D | 1.3755.0 | 4.71 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.7
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例:
ilorest flashfwpkg
リモートの例:
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21) | 22.44.1036 | MT_0000000437 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21) | 22.44.1036 | MT_0000000437 |
]]>
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
既知の問題点：
なし
Known Issues:
None
これらのコンパイル済みのRPMパッケージは、別のカーネル（errataカーネルなど）上では期待どおりにインストールまたは機能しない場合があります。 デフォルトのインボックスカーネルを使用していない場合は、ドライバーのソースパッケージ（例：<ドライバー>.src.rpm）をダウンロードし、ドライバーソースからターゲットシステム用の新しいドライバーをコンパイルしてください。
ドライバーソースRPMの場所を見つけるには、カーネルモジュールドライバーRPMに対して次のコマンドを実行します。localhost> rpm -qpi <カーネルモジュールドライバー名>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.566.9-1.rhel9u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.566.9-1.rhel9u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
json ファイルを fwpkg ファイルと同じフォルダーに配置します。
このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
Place the json file in the same folder as the fwpkg file.
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
json ファイルを fwpkg ファイルと同じフォルダーに配置します。
このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
Place the json file in the same folder as the fwpkg file.
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
]]>
Known Issues:
None
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
2. RPMをご使用のローカルドライブディレクトリにダウンロードし、そのディレクトリに移動します。
3. ドライバーをインストールあるいはアップグレードするには、プロンプトで次のコマンドをタイプします。
# rpm -Uvh elx-lpfc-
例：# rpm -Uvh kmod-elx-lpfc-14.2.589.21-1.rhel9u2.x86_64.rpm
4. インストールまたはアップグレードがエラーを出さずに完了したら、変更を有効にするためにサーバーを再起動してください。
重要：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
# rpm -e elx-lpfc-
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.589.21-1.rhel9u2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for ProLiant:
]]>
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for ProLiant:
]]>
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
json ファイルを fwpkg ファイルと同じフォルダーに配置します。
このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO7_IP_Address> -u <iLO7_username> -p <iLO7_password>
Place the json file in the same folder as the fwpkg file.
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
]]>1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| NVIDIA Ethernet 100Gb 2-port NVMe-oF Offload Adapter for HPE | 22.45.1020 | HPE0000000062 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| NVIDIA Ethernet 100Gb 2-port NVMe-oF Offload Adapter for HPE | 22.45.1020 | HPE0000000062 |
]]>
これらのコンパイル済みのRPMパッケージは、別のカーネル（errataカーネルなど）上では期待通りにインストールまたは機能しない場合があります。 デフォルトのインボックスカーネルを使用していない場合は、ドライバーのソースパッケージ（例：<ドライバー>.src.rpm）をダウンロードし、ドライバーソースからターゲットシステム用の新しいドライバーをコンパイルしてください。
ドライバーソースRPMの場所を見つけるには、カーネルモジュールドライバーRPMに対して次のコマンドを実行します。localhost> rpm -qpi <カーネルモジュールドライバー名>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>* 以前のWebリリースkmod-iavf-4.9.1-1.rhel9u2.x86_64.rpmは公開されていません
- RPMパッケージ名は（hp-iavf）から（iavf）に変更されました。この変更を（iavf）から（hp-iavf）に戻しました。
- 新しいRPMリリースは、次の新しいOSメジャーリリースまで延期されます
* kmod-hp-iavfとkmod-iavfはOSの異なるRPMパッケージです。それらは同時にまとめてインストールすることができます。
混乱を避けるため、すでにkmod-iavf-4.9.1-1.rhel9u2.x86_64.rpmをダウンロードしてインストールしている場合は、#rpm -e kmod-iavfによって以前のRPMをアンインストールしてから、アップデートされたRPMをインストールしてください。
* The previous web release kmod-iavf-4.9.1-1.rhel9u2.x86_64.rpm is unpublished
- The RPM package name was changed from (hp-iavf) to (iavf). Now we revert this change from (iavf) to (hp-iavf).
- The new RPM release is deferred to next new OS major release
* kmod-hp-iavf and kmod-iavf are different RPM package for OS. They can be together installed in the same time.
To avoid confusion, if you already download and install kmod-iavf-4.9.1-1.rhel9u2.x86_64.rpm, please uninstall the previous RPM by #rpm -e kmod-iavf and then install the updated RPM.
VIB Package can be removed using the command
VIB Package can be removed using the command
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| NVIDIA Ethernet 10/25Gb 2-port SFP28 NVMe-oF Crypto Adapter for HPE | 26.45.1020 | HPE0000000062 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| NVIDIA Ethernet 10/25Gb 2-port SFP28 NVMe-oF Crypto Adapter for HPE | 26.45.1020 | HPE0000000062 |
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
HCA対スイッチ：
HCA側（QSFP112）トランシーバー：
検証済みおよびサポートされるHDRケーブル：
検証済みおよびサポートされるHDR / 200GbEケーブル：
HDR / 200GbEケーブル：
2xHDR100 / 2x100GbEスプリッターケーブル：
検証済みおよびサポートされる10GbEケーブル：
検証済みおよびサポートされる25GbEケーブル：
検証済みおよびサポートされる40GbEケーブル：
検証済みおよびサポートされる100GbEケーブル：
検証済みおよびサポートされる200GbEケーブル：
注記：このセクションに記載されているのは、HPE部品番号の付いたケーブルだけです。サポートされているケーブルの完全なリストについては、ファームウェアダウンロードにバンドルされているリリースノートを参照してください。
]]>
HCA to Switch:
HCA side (QSFP112) transceiver:
Validated and Supported HDR cables:
Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>iLO 仮想NIC (VNIC) 機能が有効になっていることを確認します。VNICの設定手順については、HPE iLOユーザーガイドを参照してください。
]]>Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure
]]>vSphere CLIは、コンポーネントパッケージと組み合わせて使用できます。
前提条件
コマンドラインからvSphere 8.0および9.0ホストをアップデートする前に、VMware vSphereコマンドラインインターフェイス8.0および9.0（vSphere CLI）を実行できるマシンにアクセスする必要があります。Microsoft WindowsまたはLinuxシステムにvSphere CLIをインストールすることができます。vSphere CLI 7.0および8.0のインポートまたはインストール方法について詳しくは、『VMware vSphere Command-Line Interface Installation and Reference Guide』を参照してください。
手順
VMware vSphere LifeCycle Manager（vLCM）を使用したvSphere 8.0および9.0ホストへのコンポーネントのインストール
コンポーネントは、8.0および9.0 VMware vCenter Server Applianceに含まれているVMware vSphere LifeCycle Managerからインストールすることもできます。 詳細および手順について詳しくは、『VMware vSphere LifeCycle Manager Administration Guide』を参照してください。
iLO 7を搭載したHPEサーバーの場合:
iLO7を搭載したHPE Gen12サーバーでは、HPE Agentless Management Service (AMS)はHPE iLO仮想 NIC (VNIC) を使用してiLOと通信します。VNICを使用した通信には、iLOでアプリケーションアカウントが必要です。AMSインストールの一環として、アプリケーションアカウントが生成され、システムの重要なファイル内に安全に保存されます。 これは一度限りの設定です。
あるいは、アプリケーションアカウントを作成せずにアプリケーションを使用することもできます。この場合、OSまたはAMSが再起動するたびに、iLO認証情報 (amsdcliを使用) を指定する必要があります。
amsdCliを使用してアプリケーションアカウントを作成します。
インストール後、amsdCliコマンドを使用してアプリケーション アカウントを作成できます。以下のコマンドを入力します。
amsdCliを使用してiLO認証情報を指定する (アプリケーションアカウントなしの方法):
アプリケーションアカウントを作成しない場合は、OSまたはアプリケーションを再起動するたびに iLO認証情報を指定する必要があります。以下のコマンドを入力します。
AMSアプリケーションをアンインストールしても、アプリケーション アカウントは自動的に削除されないことに注意してください。ユーザーは重要なファイルとiLO GUIから手動で削除する必要があります。
バイアルファイルからアプリケーショントークンを削除するには、次のコマンドを入力します。
iLOからアプリケーションアカウントを削除するには、iLO UI、ユーザー管理/アプリケーションアカウントに移動し、削除アイコンを使用してAMSアプリケーションアカウントを削除します。
詳細については、アプリケーションに付属のユーザーマニュアルを参照してください。
]]>You can use the vSphere CLI in conjunction with Component packages.
Prerequisites
Before you can update a vSphere 8.0 and 9.0 host from the command line, you must have access to a machine on which you can run the VMware vSphere Command-Line Interface 8.0 and 9.0 (vSphere CLI). You can install the vSphere CLI on your Microsoft Windows or Linux system. For information about importing or installing the vSphere CLI 8.0 and 9.0, see the VMware vSphere Command-Line Interface Installation and Reference Guide.
Procedure
Installing Components on a vSphere 8.0 and 9.0 Host Using VMware vSphere LifeCycle Manager (vLCM)
The components can also be installed from VMware vSphere LifeCycle Manager that is included in the 8.0 and 9.0 VMware vCenter Server Appliance. For more information and detailed instructions, see the VMware vSphere LifeCycle Manager Administration Guide.
For HPE servers with iLO 7:
On HPE Gen12 servers with iLO7, HPE Agentless Management Service(AMS) uses HPE iLO Virtual NIC (VNIC) to communicate with iLO. For communication using VNIC, an application account in iLO needs to be created. As part of AMS installation, the application account can be generated and the same will be stored securely in the system's vital files. This is a one-time configuration.
Alternately application can be used without creating an application account. In this case, iLO credentials must be specified (using amsdCli) every time the OS or AMS restarts.
Using amsdCli to create application account:
After installation, you can use amsdCli command to create application account. Type the following command:
Using amsdCli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Type the following command:
Note that the application account will not be automatically removed when the AMS application is uninstalled. User will have to manually remove it from the vital files and iLO GUI.
To remove application token from the vial files, type the following command:
To remove application account from the iLO, go to the iLO UI, User management/Application account, and remove the AMS application account using the delete icon.
For more information on application account please refer to the documentation.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel9u2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel9u2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
最新の推奨またはクリティカルバージョン：
なし
前のファームウェアバージョン：
なし
機能強化/新しい機能：
なし
修正された問題点：
HPK1では、変更点および改善点として、Gen11 x2直接接続システムでドライブの内部PHYレジスタ値を変更することにより、受信信号を強化しています。
既知の問題点：
なし
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Enhancements/New Features:
None
Problems Fixed:
Changes and improvements made in HPK1 are to enhance receiver signals by changing the drive’s internal PHY register values on Gen11 x2 direct attached system.
Known Issues:
None
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
Linux FC Driver Kit for HPE Emulex FC HBAs, version 14.0.xxx.x for RedHat 8, RedHat 9 and SUSE 15.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
http://www.hpe.com/storage/spock/
The HPE supplied fibre channel driver must be installed prior to this enablement kit component if you want to enable Smart SAN functionality. The driver is available on the HPE.com website at www.hpe.com.
Linux FC Driver Kit for HPE Emulex FC HBAs, version 14.0.xxx.x for RedHat 8, RedHat 9 and SUSE 15.
However, if a Smart SAN enabled driver is not installed at execution time, the component will land the enablement kit files for future use after the driver has been installed.
]]>
To uninstall the Emulex Smart SAN enablement RPM use the following command:
# rpm -e hpe-emulex-smartsan-enablement-<version>.noarch.rpm
This is a configurable component. It requires a configuration file in order to enable/disable Smart SAN functionality. If no configuration is performed, the current Smart SAN status is stated and the execution is complete. No further action is taken.
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
1. Login as the system administrator (root).
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install, type the following command at the prompt:
# rpm -ivh hpe-emulex-smartsan-enablement-kit-<version>.x86_64.rpm
Example: # rpm -ivh hpe-emulex-smartsan-enablement-kit-1.0.0.0-4.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Installation complete
]]>
To uninstall the Emulex Smart SAN enablement RPM use the following command:
# rpm -e hpe-emulex-smartsan-enablement-<version>.noarch.rpm
This is a configurable component. It requires a configuration file in order to enable/disable Smart SAN functionality. If no configuration is performed, the current Smart SAN status is stated and the execution is complete. No further action is taken.
For detailed information about configurable components, see the Smart Update Manager User Guide
Component execution outside of HPE Service Pack for Proliant:
1. Login as the system administrator (root).
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install, type the following command at the prompt:
# rpm -ivh hpe-emulex-smartsan-enablement-kit-<version>.x86_64.rpm
Example: # rpm -ivh hpe-emulex-smartsan-enablement-kit-1.0.0.0-4.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Installation complete
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Enhancements/New Features:
None
Problems Fixed:
To fix - Frequent insertion of low priority commands during IO execution may lead to drive offline randomly.
Known Issues:
None
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Enhancements/New Features:
None
Problems Fixed:
To fix - Frequent insertion of low priority commands during IO execution may lead to drive offline randomly.
Known Issues:
None
]]>
]]>
このバージョンのイネーブルメントキットは、以前のバージョンが行ったようなRAMディスクの再構築またはドライバーパラメーターの設定といった追加の機能を提供しません。 これらの機能を実行する方法については、Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guideの「Additional setup」セクションを参照してください。 リファレンスガイドは、次のリンクから入手可能です：
http://www.hpe.com/storage/spock/
SUSE Linux Enterprise Server 15サービスパック4での同じイネーブルメントキットバージョンの書き換えは、--reinstallオプションを使用して実行する必要があります。
例：rpm –Uvh HPE-CNA-FC-Emulex-Enablement-Kit-
詳しくは、次のナレッジベースを参照してください。https://www.suse.com/support/kb/doc/?id=000019640
]]>
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 15 service pack 4 has to be performed using --reinstall option
Example: rpm –Uvh HPE-CNA-FC-Emulex-Enablement-Kit-<version>.<OS>.<architecture>.rpm --reinstall
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>2. RPMをご使用のローカルドライブディレクトリにダウンロードし、そのディレクトリに移動します。
3. ドライバーをインストールあるいはアップグレードするには、プロンプトで次のコマンドをタイプします。
# rpm -Uvh elx-lpfc-
例：# rpm -Uvh kmod-elx-lpfc-14.2.566.9-1.rhel9u3.x86_64.rpm
4. インストールまたはアップグレードがエラーを出さずに完了したら、変更を有効にするためにサーバーを再起動してください。
重要：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
# rpm -e elx-lpfc-
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.566.9-1.rhel9u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
インストールボタンをクリックして、インストールを開始します。]]>
Click the "Install" button to proceed with the installation.]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>VMware Toolsを使用してドライバーをアップデート。
HPE OneViewおよびHPE Smart Update Toolを使用してドライバーをアップデートするには。
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンを見つけてダウンロードするには、https://support.hpe.comを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
追加情報：
HPE Intel E810ベースのネットワークアダプターでは、ファームウェアのアップデートを試行した後にシステムを再起動する必要があります。システムを再起動せずにファームウェアを複数回アップデートすると、以前に試行したファームウェアのアップデートがキャンセルされる可能性があります。
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROMバージョン | NVMバージョン |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2ポートSFP28アダプター | 80020038 | 1.3755.0 | 4.71 |
NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.7と示されます
製品の詳細については、https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.htmlにある最新のドキュメントを参照してください。
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter | 80020038 | 1.3755.0 | 4.71 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.7
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-14.2.566.9_k5.14.21_150500.37-1.sles15sp5.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --reinstall option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm --reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-14.2.566.9_k5.14.21_150500.37-1.sles15sp5.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --reinstall option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm --reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.
amsd provides information to the iLO 5,iLO 6 and iLO 7 service providing SNMP support
For HPE servers with iLO 7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.
amsd provides information to the iLO 5,iLO 6 and iLO 7 service providing SNMP support
For HPE servers with iLO 7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
On HPE Gen12 servers with iLO7, HPE Agentless Management Service(AMS) uses HPE iLO Virtual NIC (VNIC) to communicate with iLO. For communication using VNIC, an application account in iLO needs to be created. As part of AMS installation, the application account can be generated and the same will be stored securely in the system TPM. This is a one-time configuration.
Alternately application can be used without creating an application account. In this case, iLO credentials must be specified (using amscli) every time the OS or AMS restarts.
Installation methods:
Method 1: Non interactive installation
Login as the system administrator (root), download the RPM and install_ams.sh to a directory on your hard drive and change to that directory.
As part of the installation process, an application account will be created. If the specified iLO credentials are incorrect or if there are any VNIC-related issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
Method 2: Using rpm command
To install the package, type:
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
To check whether the package is loaded properly, type:
Additional help is available by typing:
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Type the following command:
HPE servers with iLO 5 and iLO 6:
Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.
On HPE Gen12 servers with iLO7, HPE Agentless Management Service(AMS) uses HPE iLO Virtual NIC (VNIC) to communicate with iLO. For communication using VNIC, an application account in iLO needs to be created. As part of AMS installation, the application account can be generated and the same will be stored securely in the system TPM. This is a one-time configuration.
Alternately application can be used without creating an application account. In this case, iLO credentials must be specified (using amscli) every time the OS or AMS restarts.
Installation methods:
Method 1: Non interactive installation
Login as the system administrator (root), download the RPM and install_ams.sh to a directory on your hard drive and change to that directory.
As part of the installation process, an application account will be created. If the specified iLO credentials are incorrect or if there are any VNIC-related issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
Method 2: Using rpm command
To install the package, type:
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
To check whether the package is loaded properly, type:
Additional help is available by typing:
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Type the following command:
HPE servers with iLO 5 and iLO 6:
Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例:
ilorest flashfwpkg
リモートの例:
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P42041-B21) | 26.44.1036 | MT_0000000551 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P42041-B21) | 26.44.1036 | MT_0000000551 |
]]>
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
When the installation is complete, run command prompt environment and navigate to %programfiles%\MR Storage Administrator\StorCLI\bin folder and execute Storcli64.exe utility
For e.g: Storcli64.exe /c0 show
]]>Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
When the installation is complete, run command prompt environment and navigate to %programfiles%\MR Storage Administrator\StorCLI\bin folder and execute Storcli64.exe utility
For e.g: Storcli64.exe /c0 show
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. RPMをご使用のローカルドライブディレクトリにダウンロードし、そのディレクトリに移動します。
3. ドライバーをインストールあるいはアップグレードするには、プロンプトで次のコマンドをタイプします。
# rpm -Uvh elx-lpfc-
例：# rpm -Uvh elx-lpfc-kmp-default-14.2.566.9_k5.14.21_150400.22-1.sles15sp4.x86_64.rpm
4. インストールまたはアップグレードがエラーを出さずに完了したら、変更を有効にするためにサーバーを再起動してください。
重要：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
# rpm -e elx-lpfc-
同じドライバーバージョンの書き換えは、--reinstallオプションを使用して実行する必要があります
例：rpm –Uvh elx-lpfc-kmp-default-
詳しくは、次のナレッジベースを参照してください。https://www.suse.com/support/kb/doc/?id=000019640
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-14.2.566.9_k5.14.21_150400.22-1.sles15sp4.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --reinstall option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm --reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンを見つけてダウンロードするには、https://support.hpe.comを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utility（https://support.hpe.comで検索してダウンロード）を使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
追加情報：
HPE Intel E810ベースのネットワークアダプターでは、ファームウェアのアップデートを試行した後にシステムを再起動する必要があります。システムを再起動せずにファームウェアを複数回アップデートすると、以前に試行したファームウェアのアップデートがキャンセルされる可能性があります。
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROMバージョン | NVMバージョン |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2ポートQSFP28 OCP3アダプター | 80020036 | 1.3755.0 | 4.71 |
NIC HIIメニュー（F9->システムユーティリティ->システム構成->"NICを選択"->ファームウェアイメージプロパティ）では、NVMバージョンは4.7と示されます
製品の詳細については、https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.htmlにある最新のドキュメントを参照してください。
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter | 80020036 | 1.3755.0 | 4.71 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.7
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
インストールを選択して、ハードディスクのテンポラリディレクトリに解凍します。
インストールボタンをクリックしてドライバーインストールを実行します。
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. RPMをご使用のローカルドライブディレクトリにダウンロードし、そのディレクトリに移動します。
3. ドライバーをインストールあるいはアップグレードするには、プロンプトで次のコマンドをタイプします。
# rpm -Uvh kmod-qla2xxx-
例：# rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel9u2.x86_64.rpm
4. インストールまたはアップグレードがエラーを出さずに完了したら、変更を有効にするためにサーバーを再起動してください。
重要：インストールの失敗、あるいは警告やエラーメッセージを表示して停止した場合は、コンピューターを再起動しないでください。ドライバーは動作しないため、以下のコマンドをタイプしてアンインストールしてください。
# rpm -e kmod-qla2xxx-
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel9u2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64
Smartコンポーネントをハードディスクドライブにダウンロードし、そのディレクトリに移動します。ダウンロードしたファイルは、Smartコンポーネント番号に基づくファイル名を持つ、自己解凍型の実行ファイルです。
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
インストールボタンをクリックして、インストールを開始します。ユーティリティは自動的にインストールされます。
注記：ビルドがすでにインストールされているときに、ユーザーが同じバージョンのビルドを再度インストールしようとすると、動作が不安定になる可能性があります。既存のインストーラーに変更を加えるには、ビルドをアンインストールしてから再インストールすることをお勧めします。
]]>Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
NOTE: If user tries to install the same version of the build again when the build is already installed, the behavior can be erratic. Recommendation would be to un-install and install the build to make any changes to the existing installer.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
追加情報：
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| Broadcom BCM57608 Ethernet 100Gb 2-port QSFP112 OCP3 Adapter for HPE | 233.0.152.6 | 233.0.151.0 | 233.0.146.0 | 233.0.146.0 | 233.0.151.0 |
]]>
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| Broadcom BCM57608 Ethernet 100Gb 2-port QSFP112 OCP3 Adapter for HPE | 233.0.152.6 | 233.0.151.0 | 233.0.146.0 | 233.0.146.0 | 233.0.151.0 |
]]>
VIB Package can be removed using the command
VIB Package can be removed using the command
Existing command output/VIB behavior changes:
==============================================
1. System reboot is required for changes to take effect post VIB installation. This is because of the esxcli plugin support. StorCLI namespace needs to be registered with esxcli and hence a system reboot is the mandatory step per VMware for changes to take effect.
2. If StorCLI utility is directly executed, Command output will be in XML format with XML encoded special characters in place.
Files access / permissions:
============================
1. By default, CLI log file or any files, which are generated by plugin, will be created under /var/log/vmware/ directory.
2. An absolute file path needs to be provided for any plugins which take file as an input.
Limitations:
=============
1. Memory and temp file reservation for storcli is restricted to 100MB in ESXi8.0. Hence if this memory / temp file reservation is exhausted, Plugin will not be able to parse the data correctly. Hence please make sure that the mentioned amount of memory is reserved.
2. Direct StorCLI utility command execution will yield a XML formatted output which aligns to XML rule set.
3. Command options / command / namespaces in ESXCLI plugin are case sensitive. Hence plugin should be executed based on the help mentioned for each of the esxcli plugin else esxcli plugin will error out.
4. ESXCLI plugin has a command output data limit. If this exceeds, Plugin will not parse and display the information. If the command output length is more, Please use the file option to store the data instead else please follow the below instructions from VMware to increase the data limit.
Steps to increase the command data limit:
=========================================
1. Run the following command on the host in question: configstorecli config current get -c esx -g services -k hostd > out.json
2. Try bumping the limits in the below in VMOMI adapter and see if it helps when running esxcli.
"vmomi": {
"soap_request": {
"max_elements": 500000,
"max_depth": 1000,
"max_unauthenticated_doc_size": 100000,
"max_doc_size": 20000000
}
},
3. Then in the resulting out.json file find the entries above and bump the limits, e.g. double max_elements, max_depth and max_doc_size.
4. Finally, reapply:
configstorecli config current set -c esx -g services -k hostd -infile out.json
5. Reboot the server.
Additional notes:
=================
1. For system namespace i.e., esxcli storcli system <>, except the esxcli storcli system file <> plugin, Options --json and --nolog are valid.
These options are not displayed in esxcli plugin help because these options are optional and there are no mandatory options for these set of commands.
2. The command options to the plugins are maintained in lower case as they are case sensitive.
3. The command options are presented in alphabetical order of the parameter name. It's per the esxcli plugin convention/rules.
4. Input value needs to be enclosed in double quotes if format of the value has a space.
5. Help command is not added as the esxcli plugin framework offers help based on the available namespaces and corresponding commands/command options can be queried accordingly.
ESXCLI Plugin format:
======================
esxcli [options] {namespace}+ {cmd} [cmd options]
Example : esxcli storcli system show ctrlcount
ESXCLI plugin sample command output:
=====================================
esxcli storcli system show ctrlcount
CLI Version = 007.2417.0000.0000 Apr 21, 2023
Operating system = VMkernel8.0.0
Status Code = 0
Status = Success
Description = None
Controller Count = 1
]]>
Existing command output/VIB behavior changes:
==============================================
1. System reboot is required for changes to take effect post VIB installation. This is because of the esxcli plugin support. StorCLI namespace needs to be registered with esxcli and hence a system reboot is the mandatory step per VMware for changes to take effect.
2. If StorCLI utility is directly executed, Command output will be in XML format with XML encoded special characters in place.
Files access / permissions:
============================
1. By default, CLI log file or any files, which are generated by plugin, will be created under /var/log/vmware/ directory.
2. An absolute file path needs to be provided for any plugins which take file as an input.
Limitations:
=============
1. Memory and temp file reservation for storcli is restricted to 100MB in ESXi8.0. Hence if this memory / temp file reservation is exhausted, Plugin will not be able to parse the data correctly. Hence please make sure that the mentioned amount of memory is reserved.
2. Direct StorCLI utility command execution will yield a XML formatted output which aligns to XML rule set.
3. Command options / command / namespaces in ESXCLI plugin are case sensitive. Hence plugin should be executed based on the help mentioned for each of the esxcli plugin else esxcli plugin will error out.
4. ESXCLI plugin has a command output data limit. If this exceeds, Plugin will not parse and display the information. If the command output length is more, Please use the file option to store the data instead else please follow the below instructions from VMware to increase the data limit.
Steps to increase the command data limit:
=========================================
1. Run the following command on the host in question: configstorecli config current get -c esx -g services -k hostd > out.json
2. Try bumping the limits in the below in VMOMI adapter and see if it helps when running esxcli.
"vmomi": {
"soap_request": {
"max_elements": 500000,
"max_depth": 1000,
"max_unauthenticated_doc_size": 100000,
"max_doc_size": 20000000
}
},
3. Then in the resulting out.json file find the entries above and bump the limits, e.g. double max_elements, max_depth and max_doc_size.
4. Finally, reapply:
configstorecli config current set -c esx -g services -k hostd -infile out.json
5. Reboot the server.
Additional notes:
=================
1. For system namespace i.e., esxcli storcli system <>, except the esxcli storcli system file <> plugin, Options --json and --nolog are valid.
These options are not displayed in esxcli plugin help because these options are optional and there are no mandatory options for these set of commands.
2. The command options to the plugins are maintained in lower case as they are case sensitive.
3. The command options are presented in alphabetical order of the parameter name. It's per the esxcli plugin convention/rules.
4. Input value needs to be enclosed in double quotes if format of the value has a space.
5. Help command is not added as the esxcli plugin framework offers help based on the available namespaces and corresponding commands/command options can be queried accordingly.
ESXCLI Plugin format:
======================
esxcli [options] {namespace}+ {cmd} [cmd options]
Example : esxcli storcli system show ctrlcount
ESXCLI plugin sample command output:
=====================================
esxcli storcli system show ctrlcount
CLI Version = 007.2417.0000.0000 Apr 21, 2023
Operating system = VMkernel8.0.0
Status Code = 0
Status = Success
Description = None
Controller Count = 1
]]>A REBOOT is required for your computer when the setup is complete.
]]>A REBOOT is required for your computer when the setup is complete.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
json ファイルを fwpkg ファイルと同じフォルダーに配置します。
このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
Place the json file in the same folder as the fwpkg file.
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Gen12 servers with Power-PIC solution (HPE Proliant DLxx5 and Synergy).
]]>Gen12 servers with Power-PIC solution (HPE Proliant DLxx5 and Synergy).
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO7_IP_Address> -u <iLO7_username> -p <iLO7_password>
Place the json file in the same folder as the fwpkg file.
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO7_IP_Address> -u <iLO7_username> -p <iLO7_password>
Place the json file in the same folder as the fwpkg file.
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>1. iLO GUIからのフラッシュ
2. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
3. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
]]>1. Flash from iLO GUI
2. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
3. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
修正された問題点：
- 強力なデバイス管理機能を確保するためのアウトオブバンドメッセージ処理の改善
- デバイス管理機能の堅牢を確保するために、アウトオブバンドメッセージの改善
- このファームウェアアップデートは、システムの相互運用性を向上させ、ドライブが応答しなくなる可能性のある特定のシナリオを防止するため、推奨されます。
既知の問題点：
なし
Problems Fixed:
- Improvements to our out-of-band message handling to ensure robust device management capabilities
- Changes to improve our PCIe link compatibility as well as device reliability
- This firmware update is recommended as it improves our system interoperability and prevents specific scenarios that could cause the drive to become unresponsive.
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO7_IP_Address> -u <iLO7_username> -p <iLO7_password>
Place the json file in the same folder as the fwpkg file.
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO7_IP_Address> -u <iLO7_username> -p <iLO7_password>
Place the json file in the same folder as the fwpkg file.
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
インストールボタンをクリックして、インストールを開始してください。
]]>
Click the Install button to proceed with the installation.
]]>
amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.
amsd provides information to the iLO 5,iLO 6 and iLO 7 service providing SNMP support
For HPE servers with iLO 7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.
amsd provides information to the iLO 5,iLO 6 and iLO 7 service providing SNMP support
For HPE servers with iLO 7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
On HPE Gen12 servers with iLO7, HPE Agentless Management Service(AMS) uses HPE iLO Virtual NIC (VNIC) to communicate with iLO. For communication using VNIC, an application account in iLO needs to be created. As part of AMS installation, the application account can be generated and the same will be stored securely in the system TPM. This is a one-time configuration.
Alternately application can be used without creating an application account. In this case, iLO credentials must be specified (using amscli) every time the OS or AMS restarts.
Installation methods:
Method 1: Non interactive installation
Login as the system administrator (root), download the RPM and install_ams.sh to a directory on your hard drive and change to that directory.
As part of the installation process, an application account will be created. If the specified iLO credentials are incorrect or if there are any VNIC-related issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
Method 2: Using rpm command
To install the package, type:
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
To check whether the package is loaded properly, type:
Additional help is available by typing:
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Type the following command:
HPE servers with iLO 5 and iLO 6:
Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.
On HPE Gen12 servers with iLO7, HPE Agentless Management Service(AMS) uses HPE iLO Virtual NIC (VNIC) to communicate with iLO. For communication using VNIC, an application account in iLO needs to be created. As part of AMS installation, the application account can be generated and the same will be stored securely in the system TPM. This is a one-time configuration.
Alternately application can be used without creating an application account. In this case, iLO credentials must be specified (using amscli) every time the OS or AMS restarts.
Installation methods:
Method 1: Non interactive installation
Login as the system administrator (root), download the RPM and install_ams.sh to a directory on your hard drive and change to that directory.
As part of the installation process, an application account will be created. If the specified iLO credentials are incorrect or if there are any VNIC-related issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
Method 2: Using rpm command
To install the package, type:
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
To check whether the package is loaded properly, type:
Additional help is available by typing:
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Type the following command:
HPE servers with iLO 5 and iLO 6:
Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
1. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
2. iLO GUIからのフラッシュ
1. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
2. Flash from iLO GUI
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version |
| Broadcom BCM5719 Ethernet 1Gb 4-port Base-T Adapter for HPE | 1.60 | 21.6.4 | 1.5.61 | 21.6.90 |
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version |
| Broadcom BCM5719 Ethernet 1Gb 4-port Base-T Adapter for HPE | 1.60 | 21.6.4 | 1.5.61 | 21.6.90 |
The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
]]>
Known Issues:
None
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
これらのコンパイル済みのRPMパッケージは、別のカーネル（errataカーネルなど）上では期待通りにインストールまたは機能しない場合があります。 デフォルトのインボックスカーネルを使用していない場合は、ドライバーのソースパッケージ（例：<ドライバー>.src.rpm）をダウンロードし、ドライバーソースからターゲットシステム用の新しいドライバーをコンパイルしてください。
ドライバーソースRPMの場所を見つけるには、カーネルモジュールドライバーRPMに対して次のコマンドを実行します。localhost> rpm -qpi <カーネルモジュールドライバー名>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
追加情報：
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| Broadcom BCM57608 Ethernet 100Gb 2-port QSFP112 Adapter for HPE | 233.0.152.6 | 233.0.151.0 | 233.0.146.0 | 233.0.146.0 | 233.0.151.0 |
]]>
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| Broadcom BCM57608 Ethernet 100Gb 2-port QSFP112 Adapter for HPE | 233.0.152.6 | 233.0.151.0 | 233.0.146.0 | 233.0.146.0 | 233.0.151.0 |
]]>
これらのコンパイル済みのRPMパッケージは、別のカーネル（errataカーネルなど）上では期待通りにインストールまたは機能しない場合があります。 デフォルトのインボックスカーネルを使用していない場合は、ドライバーのソースパッケージ（例：<ドライバー>.src.rpm）をダウンロードし、ドライバーソースからターゲットシステム用の新しいドライバーをコンパイルしてください。
ドライバーソースRPMの場所を見つけるには、カーネルモジュールドライバーRPMに対して次のコマンドを実行します。localhost> rpm -qpi <カーネルモジュールドライバー名>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
HCA対スイッチ：
HCA側トランシーバー：
注記：このセクションに記載されているのは、HPE部品番号の付いたケーブルだけです。サポートされているケーブルの完全なリストについては、ファームウェアダウンロードにバンドルされているリリースノートを参照してください。
]]>
HCA to Switch:
HCA side transceiver:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例:
ilorest flashfwpkg
リモートの例:
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21) | 26.44.1036 | MT_0000000575 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21) | 26.44.1036 | MT_0000000575 |
]]>
Microsoft SNMP Service must be enabled, if SMA (System Management Assistant) is enabled.
For HPE servers with iLO7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
Microsoft SNMP Service must be enabled, if SMA (System Management Assistant) is enabled.
For HPE servers with iLO7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
Installation methods:
Method-1 : Interactive installation
Place the Smart Component in a temporary directory, then double-click it to run.
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the service installation.
Installer Optionally will ask for iLO Credential to create app account.
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
Method 2 : Silent mode (Non interactive) installation
Install AMS using smart component with following command
cp<xxxx>.exe /silent
During AMS installation in silent mode, SMA is installed but the service is not enabled.
To enable SMA service at a later time, go to the following folder: %ProgramFiles%\OEM\AMS\Service\ (Typically c:\Program Files\OEM\AMS\Service) and execute "EnableSma.bat /f"
Post this command use amscli to provide iLO credential to create application account or login to iLO.
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Open the command prompt and type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Open the command prompt and type the following command:
Note: Please run above amscli commands twice if SMA service is enabled
HPE servers with iLO6 and iLO5:
Place the Smart Component in a temporary directory, then double-click it to run.
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the service installation.
]]>
Installation methods:
Method-1 : Interactive installation
Place the Smart Component in a temporary directory, then double-click it to run.
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the service installation.
Installer Optionally will ask for iLO Credential to create app account.
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
Method 2 : Silent mode (Non interactive) installation
Install AMS using smart component with following command
cp<xxxx>.exe /silent
During AMS installation in silent mode, SMA is installed but the service is not enabled.
To enable SMA service at a later time, go to the following folder: %ProgramFiles%\OEM\AMS\Service\ (Typically c:\Program Files\OEM\AMS\Service) and execute "EnableSma.bat /f"
Post this command use amscli to provide iLO credential to create application account or login to iLO.
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Open the command prompt and type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Open the command prompt and type the following command:
Note: Please run above amscli commands twice if SMA service is enabled
HPE servers with iLO6 and iLO5:
Place the Smart Component in a temporary directory, then double-click it to run.
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the service installation.
]]>1. AMSサービスを再起動します（コマンドプロンプトで'net stop ams'と入力し、次に'net start ams'と入力します）...または...
2. レジストリのHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hpeams\ParametersにPollIntervalという名前の新しいDWORDレジストリ値を作成し、その値を10進数の300より大きい値に設定します。この値により、AMSがWMIからデータを読み取る頻度（秒単位）が決定されます。
]]>1. Restart the AMS service (type 'net stop ams' followed by 'net start ams' in a command prompt) ...OR...
2. Create a new DWORD registry value named PollInterval in registry's HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hpeams\Parameters and set its value to higher than decimal 300. This value will determine how often (in seconds) AMS reads data from WMI.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
http://www.hpe.com/storage/spock/
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
]]>http://www.hpe.com/storage/spock/
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
]]>This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 15 service pack 4 and SuSE Linux Enterprise Server 15 service pack 5 has to be performed using --force --nodeps option
Example: rpm –Uvh HPE-CNA-FC-hpeqlgc-Enablement-Kit-<version>.noarch.rpm --force --nodeps
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 15 service pack 4 and SuSE Linux Enterprise Server 15 service pack 5 has to be performed using --force --nodeps option
Example: rpm –Uvh HPE-CNA-FC-hpeqlgc-Enablement-Kit-<version>.noarch.rpm --force --nodeps
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
［インストール］ボタンをクリックして、インストールを開始します。]]>
Click the "Install" button to proceed with the installation.]]>
そのドライブのディレクトリから、ダウンロードしたファイルを実行します。
[インストール]ボタンをクリックして、インストールを開始します。
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
VMware Toolsを使用してドライバーをアップデート。
HPE OneViewおよびHPE Smart Update Toolを使用してドライバーをアップデートするには。
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
2. iLO GUIからのフラッシュ
1. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
2. Flash from iLO GUI
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version |
| BCM 5719 1GbE 4p BASE-T OCP3 Adptr | 1.60 | 21.6.4 | 1.5.61 | 21.6.90 |
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version |
| BCM 5719 1GbE 4p BASE-T OCP3 Adptr | 1.60 | 21.6.4 | 1.5.61 | 21.6.90 |
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Last Recommended or Critical Version:
HPK0
Previous Version of Firmware:
HPK0
]]>
Last Recommended or Critical Version:
HPK0
Previous Version of Firmware:
HPK0
]]>
これらのコンパイル済みのRPMパッケージは、別のカーネル（errataカーネルなど）上では期待どおりにインストールまたは機能しない場合があります。 デフォルトのインボックスカーネルを使用していない場合は、ドライバーのソースパッケージ（例：<ドライバー>.src.rpm）をダウンロードし、ドライバーソースからターゲットシステム用の新しいドライバーをコンパイルしてください。
ドライバーソースRPMの場所を見つけるには、カーネルモジュールドライバーRPMに対して次のコマンドを実行します。localhost> rpm -qpi <カーネルモジュールドライバー名>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>この方法は、このコンポーネントがすでにESXiホストにインストールされていて、自動モードで実行されている場合に機能します。
『SUMユーザーガイド』でiLO 5によるサーバーのアップデートを参照してください。
VMwareツールを使用して、このバンドルをインストールするには：
esxcliコマンドの詳細については、VMwareのドキュメントを参照してください。
]]>This method works if this component is already installed on the ESXi host and is running in the Auto mode.
Refer Server updates through iLO 5 in SUM User Guide
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>これらのコンパイル済みのRPMパッケージは、別のカーネル（errataカーネルなど）上では期待通りにインストールまたは機能しない場合があります。 デフォルトのインボックスカーネルを使用していない場合は、ドライバーのソースパッケージ（例：<ドライバー>.src.rpm）をダウンロードし、ドライバーソースからターゲットシステム用の新しいドライバーをコンパイルしてください。
ドライバーソースRPMの場所を見つけるには、カーネルモジュールドライバーRPMに対して次のコマンドを実行します。localhost> rpm -qpi <カーネルモジュールドライバー名>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Enhancements/New Features:
None
Problems Fixed:
This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
Known Issues:
None
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Enhancements/New Features:
None
Problems Fixed:
This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
Known Issues:
None
1. このファームウェアパッケージをフラッシュするには、次のiLOrestコマンドを使用します。 iLOrestツールの最新バージョンをダウンロードするには、http://www.hpe.com/servers/resttoolを参照してください。
ローカルホストOSの例：
ilorest flashfwpkg
リモートの例：
ilorest flashfwpkg
2. このファームウェアパッケージは、Smart Update Manager（SUM）の最新バージョンでもインストールできます。
サポートされるProLiantサーバーおよびオプションのためのサプリメンタルアップデートは、Service Pack for ProLiant (SPP) ISO上にあるSUMを使用して実行できます。
USB Key Creator Utilityを使用して、Service Pack for ProLiantをUSBキーにコピーします。
アップデートに必要なファームウェアパッケージおよびコンポーネントをUSBキーの"\packages"ディレクトリにコピーします。
通常の手順でファームウェアおよびソフトウェアをアップデートします。
アップデートを直ちに有効にするにはシステムを再起動してください。
3. iLO GUIからのフラッシュ
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
最新の推奨またはクリティカルバージョン：
なし
前のファームウェアバージョン：
なし
機能強化/新しい機能：
なし
修正された問題点：
ランダム読み取り/書き込みパフォーマンスを向上します。
既知の問題点：
なし
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Enhancements/New Features:
None
Problems Fixed:
Improve random read/write perfomance.
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI