This is openocd.info, produced by makeinfo version 6.7 from
openocd.texi.

This User's Guide documents release 0.12.0, dated 20 December 2022, of
the Open On-Chip Debugger (OpenOCD).

   * Copyright (C) 2008-2022 The OpenOCD Project
   * Copyright (C) 2007-2008 Spencer Oliver <spen@spen-soft.co.uk>
   * Copyright (C) 2008-2010 Oyvind Harboe <oyvind.harboe@zylin.com>
   * Copyright (C) 2008 Duane Ellis <openocd@duaneellis.com>
   * Copyright (C) 2009-2010 David Brownell

     Permission is granted to copy, distribute and/or modify this
     document under the terms of the GNU Free Documentation License,
     Version 1.2 or any later version published by the Free Software
     Foundation; with no Invariant Sections, no Front-Cover Texts, and
     no Back-Cover Texts.  A copy of the license is included in the
     section entitled "GNU Free Documentation License".
INFO-DIR-SECTION Development
START-INFO-DIR-ENTRY
* OpenOCD: (openocd).      OpenOCD User's Guide
END-INFO-DIR-ENTRY


Indirect:
openocd.info-1: 992
openocd.info-2: 334264

Tag Table:
(Indirect)
Node: Top992
Node: About3455
Node: Developers7787
Node: Debug Adapter Hardware11127
Node: About Jim-Tcl23364
Node: Running25509
Node: OpenOCD Project Setup30905
Ref: OpenOCD Project Setup-Footnote-150857
Ref: OpenOCD Project Setup-Footnote-251197
Ref: OpenOCD Project Setup-Footnote-351465
Node: Config File Guidelines51793
Ref: theinitboardprocedure62972
Ref: theinittargetsprocedure74312
Ref: translatingconfigurationfiles77984
Ref: Config File Guidelines-Footnote-179235
Node: Server Configuration79310
Ref: configurationstage79632
Ref: enteringtherunstage81107
Ref: tcpipports84560
Ref: gdb_port85055
Ref: gdbconfiguration87313
Ref: gdbbreakpointoverride87628
Ref: gdbflashprogram88003
Ref: eventpolling89512
Node: Debug Adapter Configuration91948
Ref: adapter gpio94174
Ref: hla_interface125214
Ref: st_link_dap_interface126773
Ref: swimtransport143677
Ref: jtagspeed144444
Node: Reset Configuration147406
Ref: srstandtrstissues150334
Ref: reset_config154516
Node: TAP Declaration162428
Ref: enablinganddisablingtaps174342
Ref: autoprobing176989
Ref: dapdeclaration179644
Ref: dap_create180158
Ref: DAP subcommand apreg182984
Ref: TAP Declaration-Footnote-1186373
Node: CPU Configuration186573
Ref: targettypes189467
Ref: targetconfiguration193997
Ref: rtostype199791
Ref: gdbportoverride201058
Ref: targetcurstate206085
Ref: targetevents208073
Node: Flash Commands215119
Ref: norconfiguration216652
Ref: flashprogrammingcommands219889
Ref: flashprotect227669
Ref: program228495
Ref: flashdriverlist228775
Ref: at91sam3252036
Ref: atsame5255392
Ref: nandconfiguration318157
Ref: nanddriverlist328543
Node: Flash Programming334264
Node: PLD/FPGA Commands335877
Node: General Commands338250
Ref: debuglevel341222
Ref: targetstatehandling342527
Ref: resetcommand348352
Ref: memoryaccess350771
Ref: imageaccess352639
Node: Architecture and Core Commands360378
Ref: armhardwaretracing360848
Ref: traceportdrivers368762
Ref: armcrosstrigger370493
Ref: arm9vectorcatch380111
Ref: xscalevectorcatch388016
Ref: add-reg-type-struct428705
Ref: softwaredebugmessagesandtracing441197
Node: JTAG Commands444666
Node: Boundary Scan Commands452156
Node: Utility Commands457866
Node: GDB and OpenOCD459711
Ref: programmingusinggdb464823
Ref: gdbmeminspect466469
Ref: gdbrtossupport468406
Ref: usingopenocdsmpwithgdb470948
Node: Tcl Scripting API471622
Node: FAQ475105
Ref: faqrtck475215
Ref: faqtaporder487106
Node: Tcl Crash Course488872
Node: License500880
Node: OpenOCD Concept Index523292
Node: Command and Driver Index547354

End Tag Table


Local Variables:
coding: utf-8
End:
