<?php
$lang['info_cmsmailer'] = 'Ezt a modult sz&aacute;mtalan m&aacute;sik felhaszn&aacute;lja e-mail k&uuml;ld&eacute;s c&eacute;lj&aacute;b&oacute;l. Pontos be&aacute;ll&iacute;t&aacute;sa sz&uuml;ks&eacute;ges a host futtat&oacute;k&ouml;rnyezethez. A hosting szolg&aacute;ltat&oacute;t&oacute;l kapott inform&aacute;ci&oacute;k alapj&aacute;n &eacute;rdemes pr&oacute;b&aacute;lkoznod. Ha m&eacute;g &iacute;gy sem megy a teszt &uuml;zenet kik&uuml;ld&eacute;se, akkor k&eacute;rd a hosting szolg&aacute;ltat&oacute; tov&aacute;bbi seg&iacute;ts&eacute;g&eacute;t.
';
$lang['charset'] = 'Karakter kioszt&aacute;s';
$lang['sendtestmailconfirm'] = 'Egy teszt&uuml;zenetet fogunk k&uuml;ldeni a megadott c&iacute;mre. Ha a k&uuml;ld&eacute;s sikeres, akkor visszat&eacute;r&uuml;nk erre az oldalra. Folytatod?';
$lang['settingsconfirm'] = '&Iacute;rjuk ezeket az &eacute;rt&eacute;keket a CMSMailer be&aacute;ll&iacute;t&aacute;sokhoz?';
$lang['testsubject'] = 'CMSMailer Teszt &Uuml;zenet';
$lang['testbody'] = 'Ezt az &uuml;zenetet az&eacute;rt kaptad, hogy ellenőrizhess&uuml;k a CMSMailer modul be&aacute;ll&iacute;t&aacute;sainek helyess&eacute;g&eacute;t.
Ha megkaptad, akkor minden helyesen van be&aacute;ll&iacute;tva &eacute;s &ouml;r&uuml;l&uuml;nk.';
$lang['error_notestaddress'] = 'Hiba: Nincs megadva tesztc&iacute;m';
$lang['prompt_testaddress'] = 'Teszt Email C&iacute;m';
$lang['sendtest'] = 'Teszt &Uuml;zenet K&uuml;ld&eacute;se';
$lang['password'] = 'Jelsz&oacute;';
$lang['username'] = 'Felhaszn&aacute;l&oacute; n&eacute;v';
$lang['smtpauth'] = 'SMTP Hiteles&iacute;t&eacute;s';
$lang['mailer'] = '&Uuml;zenetk&uuml;ld&eacute;si met&oacute;dus';
$lang['host'] = 'SMTP host neve<br/><i>(vagy IP c&iacute;me)</i>';
$lang['port'] = 'SMTP Port sz&aacute;ma';
$lang['from'] = 'Felad&oacute; c&iacute;me';
$lang['fromuser'] = 'Felad&oacute; felhaszn&aacute;l&oacute;i neve';
$lang['sendmail'] = 'Sendmail &uacute;tvonal';
$lang['timeout'] = 'SMTP időkorl&aacute;t';
$lang['submit'] = 'Elk&uuml;ld';
$lang['cancel'] = 'M&eacute;gsem';
$lang['info_mailer'] = 'Haszn&aacute;lnd&oacute; email met&oacute;dus (sendmail, smtp, mail).  &Aacute;ltal&aacute;ban az smtp a legmegb&iacute;zhat&oacute;bb.';
$lang['info_host'] = 'SMTP host neve (csak az smtp met&oacute;dus eset&eacute;n &eacute;rv&eacute;nyes)';
$lang['info_port'] = 'SMTP port sz&aacute;ma (&aacute;tal&aacute;ban 25) (csak az smtp met&oacute;dus eset&eacute;n &eacute;rv&eacute;nyes)';
$lang['info_from'] = 'A felad&oacute; c&iacute;me az &ouml;sszes kimenő mail-en';
$lang['info_fromuser'] = 'A felad&oacute; term&eacute;szetes neve az &ouml;sszes kimenő mail-en';
$lang['info_sendmail'] = 'A sendmail bin&aacute;ris teljes &uacute;tvonala (csak a sendmail met&oacute;dus eset&eacute;n &eacute;rv&eacute;nyes)';
$lang['info_timeout'] = 'Azon m&aacute;sodpercek sz&aacute;ma egy SMTP kommunik&aacute;ci&oacute;ban, amit m&eacute;g elfogadunk &eacute;rv&eacute;nyesnek (csak az smtp met&oacute;dus eset&eacute;n &eacute;rv&eacute;nyes)';
$lang['info_smtpauth'] = 'Megk&ouml;veteli az SMTP host a hiteles&iacute;t&eacute;st? (csak az smtp met&oacute;dus eset&eacute;n &eacute;rv&eacute;nyes)';
$lang['info_username'] = 'SMTP hiteles&iacute;t&eacute;shez haszn&aacute;lt felhaszn&aacute;l&oacute; n&eacute;v (csak az smtp met&oacute;dus eset&eacute;n &eacute;rv&eacute;nyes, amikor a hiteles&iacute;t&eacute;s is ki van v&aacute;lasztva)';
$lang['info_password'] = 'SMTP hiteles&iacute;t&eacute;shez haszn&aacute;lt jelsz&oacute; (csak az smtp met&oacute;dus eset&eacute;n &eacute;rv&eacute;nyes, amikor a hiteles&iacute;t&eacute;s is ki van v&aacute;lasztva)';
$lang['friendlyname'] = 'CMSMailer Modul';
$lang['postinstall'] = 'A CMSMailer modul telep&iacute;t&eacute;se megt&ouml;rt&eacute;nt';
$lang['postuninstall'] = 'A CMSMailer modul elt&aacute;vol&iacute;t&aacute;sa megt&ouml;rt&eacute;nt... sajn&aacute;ljuk, hogy elm&eacute;sz.';
$lang['uninstalled'] = 'A modul elt&aacute;vol&iacute;t&aacute;sa megt&ouml;rt&eacute;nt.';
$lang['installed'] = 'A modul %s verzi&oacute;ja telep&iacute;tve van.';
$lang['accessdenied'] = 'A hozz&aacute;f&eacute;r&eacute;s megtagadva. K&eacute;rem, ellenőrizze a jogosults&aacute;gokat.';
$lang['error'] = 'Hiba!';
$lang['upgraded'] = 'A modult friss&iacute;tett&uuml;k erre a verzi&oacute;ra: %s.';
$lang['title_mod_prefs'] = 'Modul preferenci&aacute;k';
$lang['title_mod_admin'] = 'Modul Admin Panel';
$lang['title_admin_panel'] = 'CMSMailer Modul';
$lang['moddescription'] = 'Ez egy egyszerű burkol&oacute; a PHPMailer k&ouml;r&eacute;. Azzal f&uuml;ggv&eacute;nyről-f&uuml;ggv&eacute;nyre megegyező API-val rendelkezik, plusz egy egyszerű interface-szel n&eacute;h&aacute;ny default-hoz.';
$lang['welcome_text'] = '<p>Isten hozott a CMSMailer admin szekci&oacute;j&aacute;ban.';
$lang['changelog'] = '<ul>
<li>Version 1.73.1. October, 2005. Initial Release.</li>
<li>Version 1.73.2. October, 2005. Minor bug fix with the admin panel.  The dropdown was not representing the current value from the preferences database</li>
<li>Version 1.73.3. October, 2005. Minor bug fix with sending html email</li>
<li>Version 1.73.4. November, 2005. Form fields in preferences are larger, fixed a problem with the fromuser, and called reset within the constructor</li>
<li>Version 1.73.5. November, 2005. Added the form fields and functionality for SMTP authentication.</li>
<li>Version 1.73.6. December, 2005. Default mailer method is SMTP on install, and improved documentation, and now I clear all the attachments, and addresses, etc. on reset.</li>
<li>Version 1.73.7. January, 2006. Increased field lengths in most fields</li>
<li>Version 1.73.8. January, 2006. Changed the preferences panel to be a bit more descriptive.</li>
<li>Version 1.73.9. January, 2006. Added test email capability, and confirmation on each button (except cancel)</li>
</ul>';
$lang['help'] = '<h3>What Does This Do?</h3>
<p>This module provides no end user functionality.  It is designed to be integrated into other modules to provide email capabilities.  Thats it, nothing more.</p>
<h3>How Do I Use It</h3>
<p>This module provides a simple wrapper around all of the methods and variables of phpmailer.  It is designed for use by other module developers, below is an example, and a brief API reference.  Please read the PHPMailer documentation included for more information.</p>
<h3>An Example</h3>
<pre>
  $cmsmailer = $this->GetModuleInstance(&#039;CMSMailer&#039;);
  $cmsmailer->AddAddress(&#039;calguy1000@hotmail.com&#039;,&#039;calguy&#039;);
  $cmsmailer->SetBody(&#039;<h4>This is a test message</h4>&#039;);
  $cmsmailer->IsHTML(true);
  $cmsmailer->SetSubject(&#039;Test message&#039;);
  $cmsmailer->Send();
</pre>
<h3>API</h3>
<ul>
<li><p><b>void reset()</b></p>
<p>Reset the object back to the values specified in the admin panel</p>
</li>
<li><p><b>string GetAltBody()</b></p>
<p>Return the alternate body of the email</p>
</li>
<li><p><b>void SetAltBody( $string )</b></p>
<p>Set the alternate body of the email</p>
</li>
<li><p><b>string GetBody()</b></p>
<p>Return the primary body of the email</p>
</li>
<li><p><b>void SetBody( $string )</b></p>
<p>Set the primary body of the email</p>
</li>
<li><p><b>string GetCharSet()</b></p>
<p>Default: iso-8859-1</p>
<p>Return the mailer character set</p>
</li>
<li><p><b>void SetCharSet( $string )</b></p>
<p>Set the mailer character set</p>
</li>
<li><p><b>string GetConfirmReadingTo()</b></p>
<p>Return the address confirmed reading email flag</p>
</li>
<li><p><b>void SetConfirmReadingTo( $address )</b></p>
<p>Set or unset the confirm reading address</p>
</li>
<li><p><b>string GetContentType()</b></p>
<p>Default: text/plain</p>
<p>Return the content type</p>
</li>
<li><p><b>void SetContentType()</b></p>
<p>Set the content type</p>
</li>
<li><p><b>string GetEncoding()</b></p>
<p>Return the encoding</p>
</li>
<li><p><b>void SetEncoding( $encoding )</b></p>
<p>Set the encoding</p>
<p>Options are: 8bit, 7bit, binary, base64, quoted-printable</p>
</li>
<li><p><b>string GetErrorInfo()</b></p>
<p>Return any error information</p>
</li>
<li><p><b>string GetFrom()</b></p>
<p>Return the current originating address</p>
</li>
<li><p><b>void SetFrom( $address )</b></p>
<p>Set the originating address</p>
</li>
<li><p><b>string GetFromName()</b></p>
<p>Return the current originating name</p>
</li>
<li><p><b>SetFromName( $name )</b></p>
<p>Set the originating name</p>
</li>
<li><p><b>string GetHelo()</b></p>
<p>Return the HELO string</p>
</li>
<li><p><b>SetHelo( $string )</b></p>
<p>Set the HELO string</p>
<p>Default value: $hostname</p>
</li>
<li><p><b>string GetHost()</b></p>
<p>Return the SMTPs host separated by semicolon</p>
</li>
<li><p><b>void SetHost( $string )</b></p>
<p>Set the hosts</p>
</li>
<li><p><b>string GetHostName()</b></p>
<p>Return the hostname used for SMTP Helo</p>
</li>
<li><p><b>void SetHostName( $hostname )</b></p>
<p>Set the hostname used for SMTP Helo</p>
</li>
<li><p><b>string GetMailer()</b></p>
<p>Return the mailer</p>
</li>
<li><p><b>void SetMailer( $mailer )</b></p>
<p>Set the mailer, either sendmail,mail, or smtp</p>
</li>
<li><p><b>string GetPassword()</b></p>
<p>Return the password for smtp auth</p>
</li>
<li><p><b>void SetPassword( $string )</b></p>
<p>Set the password for smtp auth</p>
</li>
<li><p><b>int GetPort()</b></p>
<p>Return the port number for smtp connections</p>
</li>
<li><p><b>void SetPort( $int )</b></p>
<p>Set the port for smtp connections</p>
</li>
<li><p><b>int GetPriority()</b></p>
<p>Return the message priority</p>
</li>
<li><p><b>void SetPriority( int )</b></p>
<p>Set the message priority</p>
<p>Values are 1=High, 3 = Normal, 5 = Low</p>
</li>
<li><p><b>string GetSender()</b></p>
<p>Return the sender email (return path) string</p>
</li>
<li><p><b>void SetSender( $address )</b></p>
<p>Set the sender string</p>
</li>
<li><p><b>string GetSendmail()</b></p>
<p>Return the sendmail path</p>
</li>
<li><p><b>void SetSendmail( $path )</b></p>
<p>Set the sendmail path</p>
</li>
<li><p><b>bool GetSMTPAuth()</b></p>
<p>Return the current value of the smtp auth flag</p>
</li>
<li><p><b>SetSMTPAuth( $bool )</b></p>
<p>Set the smtp auth flag</p>
</li>
<li><p><b>bool GetSMTPDebug()</b></p>
<p>Return the value of the SMTP debug flag</p>
</li>
<li><p><b>void SetSMTPDebug( $bool )</b></p>
<p>Set the SMTP debug flag</p>
</li>
<li><p><b>bool GetSMTPKeepAlive()</b></p>
<p>Return the value of the SMTP keep alive flag</p>
</li>
<li><p><b>SetSMTPKeepAlive( $bool )</b></p>
<p>Set the SMTP keep alive flag</p>
</li>
<li><p><b>string GetSubject()</b></p>
<p>Return the current subject string</p>
</li>
<li><p><b>void SetSubject( $string )</b></p>
<p>Set the subject string</p>
</li>
<li><p><b>int GetTimeout()</b></p>
<p>Return the timeout value</p>
</li>
<li><p><b>void SetTimeout( $seconds )</b></p>
<p>Set the timeout value</p>
</li>
<li><p><b>string GetUsername()</b></p>
<p>Return the smtp auth username</p>
</li>
<li><p><b>void SetUsername( $string )</b></p>
<p>Set the smtp auth username</p>
</li>
<li><p><b>int GetWordWrap()</b></p>
<p>Return the wordwrap value</p>
</li>
<li><p><b>void SetWordWrap( $int )</b></p>
<p>Return the wordwrap value</p>
</li>
<li><p><b>AddAddress( $address, $name = &#039;&#039; )</b></p>
<p>Add a destination address</p>
</li>
<li><p><b>AddAttachment( $path, $name = &#039;&#039;, $encoding = &#039;base64&#039;, $type = &#039;application/octent-stream&#039; )</b></p>
<p>Add a file attachment</p>
</li>
<li><p><b>AddBCC( $address, $name = &#039;&#039; )</b></p>
<p>Add a BCC&#039;d destination address</p>
</li>
<li><p><b>AddCC( $address, $name = &#039;&#039; )</b></p>
<p>Add a CC&#039;d destination address</p>
</li>
<li><p><b>AddCustomHeader( $txt )</b></p>
<p>Add a custom header to the email</p>
</li>
<li><p><b>AddEmbeddedImage( $path, $cid, $name = &#039;&#039;, $encoding = &#039;base64&#039;, $type = &#039;application/octent-stream&#039; )</b></p>
<p>Add an embedded image</p>
</li>
<li><p><b>AddReplyTo( $address, $name = &#039;&#039; )</b></p>
<p>Add a reply to address</p>
</li>
<li><p><b>AddStringAttachment( $string, $filename, $encoding = &#039;base64&#039;, $type = &#039;application/octent-stream&#039; )</b></p>
<p>Add a file attachment</p>
</li>
<li><p><b>ClearAddresses()</b></p>
<p>Clear all addresses</p>
</li>
<li><p><b>ClearAllRecipients()</b></p>
<p>Clear all recipients</p>
</li>
<li><p><b>ClearAttachments()</b></p>
<p>Clear all attachments</p>
</li>
<li><p><b>ClearBCCs()</b></p>
<p>Clear all BCC addresses</p>
</li>
<li><p><b>ClearCCs()</b></p>
<p>Clear all CC addresses</p>
</li>
<li><p><b>ClearCustomHeaders()</b></p>
<p>Clear all custom headers</p>
</li>
<li><p><b>ClearReplyto()</b></p>
<p>Clear reply to address</p>
</li>
<li><p><b>IsError()</b></p>
<p>Check for an error condition</p>
</li>
<li><p><b>bool IsHTML( $bool )</b></p>
<p>Set the html flag</p>
<p><i>Note</i> possibly this should be a get and set method</p>
</li>
<li><p><b>bool IsMail()</b></p>
<p>Check wether we are using mail</p>
</li>
<li><p><b>bool IsQmail()</b></p>
<p>Check wether we are using qmail</p>
</li>
<li><p><b>IsSendmail()</b></p>
<p>Check wether we are using sendmail</p>
</li>
<li><p><b>IsSMTP()</b></p>
<p>Check wether we are using smtp</p>
</li>
<li><p><b>Send()</b></p>
<p>Send the currently prepared email</p>
</li>
<li><p><b>SetLanguage( $lang_type, $lang_path = &#039;&#039; )</b></p>
<p>Set the current language and <em>(optional)</em> language path</p>
</li>
<li><p><b>SmtpClose()</b></p>
<p>Close the smtp connection</p>
</li>
</ul>
<h3>Support</h3>
<p>This module does not include commercial support. However, there are a number of resources available to help you with it:</p>
<ul>
<li>For the latest version of this module, FAQs, or to file a Bug Report or buy commercial support, please visit calguys homepage at <a href=&#039;http://techcom.dyndns.org&#039;>techcom.dyndns.org</a>.</li>
<li>Additional discussion of this module may also be found in the <a href=&#039;http://forum.cmsmadesimple.org&#039;>CMS Made Simple Forums</a>.</li>
<li>The author, calguy1000, can often be found in the <a href=&#039;irc://irc.freenode.net/#cms&#039;>CMS IRC Channel</a>.</li>
<li>Lastly, you may have some success emailing the author directly.</li>  
</ul>
<p>As per the GPL, this software is provided as-is. Please read the text
of the license for the full disclaimer.</p>

<h3>Copyright and License</h3>
<p>Copyright &copy; 2005, Robert Campbell <a href=&#039;mailto:calguy1000@hotmail.com&#039;><calguy1000@hotmail.com></a>. All Rights Are Reserved.</p>
<p>This module has been released under the <a href=&#039;http://www.gnu.org/licenses/licenses.html#GPL&#039;>GNU Public License</a>. You must agree to this license before using the module.</p>
';
$lang['utma'] = '156861353.1533605959.1224742544.1240634384.1241159145.15';
$lang['utmz'] = '156861353.1239430985.12.4.utmcsr=themes.cmsmadesimple.org|utmccn=(referral)|utmcmd=referral|utmcct=/index.php';
$lang['utmb'] = '156861353';
$lang['utmc'] = '156861353';
?>