PUPPETCONF(5)

This page is autogenerated; any changes will get overwritten (last generated on 2015-05-18 10:15:47 -0700)

Configuration Settings

•   Each of these settings can be specified in puppet.conf or on the command line.

•   When using boolean settings on the command line, use --setting and --no-setting instead of --setting (true|false). (Using --setting false results in "Error: Could not parse application options: needless argument".)

•   Settings can be interpolated as $variables in other settings; $environment is special, in that puppet master will interpolate each agent node's environment instead of its own.

•   Multiple values should be specified as comma-separated lists; multiple directories should be separated with the system path separator (usually a colon).

•   Settings that represent time intervals should be specified in duration format: an integer immediately followed by one of the units 'y' (years of 365 days), 'd' (days), 'h' (hours), 'm' (minutes), or 's' (seconds). The unit cannot be combined with other units, and defaults to seconds when omitted. Examples are '3600' which is equivalent to '1h' (one hour), and '1825d' which is equivalent to '5y' (5 years).

•   Settings that take a single file or directory can optionally set the owner, group, and mode for their value: rundir = $vardir/run { owner = puppet, group = puppet, mode = 644 }

•   The Puppet executables will ignore any setting that isn't relevant to their function.

See the configuration guide https://docs.puppetlabs.com/guides/configuring.html for more details.

  agent_catalog_run_lockfile
A lock file to indicate that a puppet agent catalog run is currently in progress. The file contains the pid of the process that holds the lock on the catalog run.

•   Default: $statedir/agent_catalog_run.lock

  agent_disabled_lockfile
A lock file to indicate that puppet agent runs have been administratively disabled. File contains a JSON object with state information.

•   Default: $statedir/agent_disabled.lock

  allow_duplicate_certs
Whether to allow a new certificate request to overwrite an existing certificate.

•   Default: false

  always_cache_features
Affects how we cache attempts to load Puppet 'features'. If false, then calls to Puppet.features.<feature>? will always attempt to load the feature (which can be an expensive operation) unless it has already been loaded successfully. This makes it possible for a single agent run to, e.g., install a package that provides the underlying capabilities for a feature, and then later load that feature during the same run (even if the feature had been tested earlier and had not been available).

If this setting is set to true, then features will only be checked once, and if they are not available, the negative result is cached and returned for all subsequent attempts to load the feature. This behavior is almost always appropriate for the server, and can result in a significant performance improvement for features that are checked frequently.

•   Default: false

  archive_file_server
During an inspect run, the file bucket server to archive files to if archive_files is set.

•   Default: $server

  archive_files
During an inspect run, whether to archive files whose contents are audited to a file bucket.

•   Default: false

  autoflush
Whether log files should always flush to disk.

•   Default: true

  autosign
Whether (and how) to autosign certificate requests. This setting is only relevant on a puppet master acting as a certificate authority (CA).

Valid values are true (autosigns all certificate requests; not recommended), false (disables autosigning certificates), or the absolute path to a file.

The file specified in this setting may be either a configuration file or a custom policy executable. Puppet will automatically determine what it is: If the Puppet user (see the user setting) can execute the file, it will be treated as a policy executable; otherwise, it will be treated as a config file.

If a custom policy executable is configured, the CA puppet master will run it every time it receives a CSR. The executable will be passed the subject CN of the request as a command line argument, and the contents of the CSR in PEM format on stdin. It should exit with a status of 0 if the cert should be autosigned and non-zero if the cert should not be autosigned.

If a certificate request is not autosigned, it will persist for review. An admin user can use the puppet cert sign command to manually sign it, or can delete the request.

For info on autosign configuration files, see the guide to Puppet's config files https://docs.puppetlabs.com/guides/configuring.html.

•   Default: $confdir/autosign.conf

  basemodulepath
The search path for global modules. Should be specified as a list of directories separated by the system path separator character. (The POSIX path separator is ':', and the Windows path separator is ';'.)

These are the modules that will be used by all environments. Note that the modules directory of the active environment will have priority over any global directories. For more info, see https://docs.puppetlabs.com/puppet/latest/reference/environments.html

•   Default: $codedir/modules:/opt/puppetlabs/puppet/modules

  bindaddress
The address a listening server should bind to.

•   Default: 0.0.0.0

  binder_config
The binder configuration file. Puppet reads this file on each request to configure the bindings system. If set to nil (the default), a $confdir/binder_config.yaml is optionally loaded. If it does not exists, a default configuration is used. If the setting :binding_config is specified, it must reference a valid and existing yaml file.

Default:

  bucketdir
Where FileBucket files are stored.

•   Default: $vardir/bucket

  ca
Whether the master should function as a certificate authority.

•   Default: true

  ca_name
The name to use the Certificate Authority certificate.

•   Default: Puppet CA: $certname

  ca_port
The port to use for the certificate authority.

•   Default: $masterport

  ca_server
The server to use for certificate authority requests. It's a separate server because it cannot and does not need to horizontally scale.

•   Default: $server

  ca_ttl
The default TTL for new certificates. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

•   Default: 5y

  cacert
The CA certificate.

•   Default: $cadir/ca_crt.pem

  cacrl
The certificate revocation list (CRL) for the CA. Will be used if present but otherwise ignored.

•   Default: $cadir/ca_crl.pem

  cadir
The root directory for the certificate authority.

•   Default: $ssldir/ca

  cakey
The CA private key.

•   Default: $cadir/ca_key.pem

  capass
Where the CA stores the password for the private key.

•   Default: $caprivatedir/ca.pass

  caprivatedir
Where the CA stores private certificate information.

•   Default: $cadir/private

  capub
The CA public key.

•   Default: $cadir/ca_pub.pem

  catalog_cache_terminus
How to store cached catalogs. Valid values are 'json', 'msgpack' and 'yaml'. The agent application defaults to 'json'.

Default:

  catalog_terminus
Where to get node catalogs. This is useful to change if, for instance, you'd like to pre-compile catalogs and store them in memcached or some other easily-accessed store.

•   Default: compiler

  cert_inventory
The inventory file. This is a text file to which the CA writes a complete listing of all certificates.

•   Default: $cadir/inventory.txt

  certdir
The certificate directory.

•   Default: $ssldir/certs

  certificate_revocation
Whether certificate revocation should be supported by downloading a Certificate Revocation List (CRL) to all clients. If enabled, CA chaining will almost definitely not work.

•   Default: true

  certname
The name to use when handling certificates. When a node requests a certificate from the CA puppet master, it uses the value of the certname setting as its requested Subject CN.

This is the name used when managing a node's permissions in auth.conf https://docs.puppetlabs.com/puppet/latest/reference/config_file_auth.html. In most cases, it is also used as the node's name when matching node definitions https://docs.puppetlabs.com/puppet/latest/reference/lang_node_definitions.html and requesting data from an ENC. (This can be changed with the node_name_value and node_name_fact settings, although you should only do so if you have a compelling reason.)

A node's certname is available in Puppet manifests as $trusted['certname']. (See Facts and Built-In Variables https://docs.puppetlabs.com/puppet/latest/reference/lang_facts_and_builtin_vars.html for more details.)

•   For best compatibility, you should limit the value of certname to only use letters, numbers, periods, underscores, and dashes. (That is, it should match /A[a-z0-9._-]+Z/.)

•   The special value ca is reserved, and can't be used as the certname for a normal node.

Defaults to the node's fully qualified domain name.

•   Default: rll.corp.puppetlabs.net

  cfacter
Whether or not to use the native facter (cfacter) implementation instead of the Ruby one (facter). Defaults to false.

•   Default: false

  classfile
The file in which puppet agent stores a list of the classes associated with the retrieved configuration. Can be loaded in the separate puppet executable using the --loadclasses option.

•   Default: $statedir/classes.txt

  client_datadir
The directory in which serialized data is stored on the client.

•   Default: $vardir/client_data

  clientbucketdir
Where FileBucket files are stored locally.

•   Default: $vardir/clientbucket

  clientyamldir
The directory in which client-side YAML data is stored.

•   Default: $vardir/client_yaml

  code
Code to parse directly. This is essentially only used by puppet, and should only be set if you're writing your own Puppet executable.

  codedir
The main Puppet code directory. The default for this setting is calculated based on the user. If the process is running as root or the user that Puppet is supposed to run as, it defaults to a system directory, but if it's running as any other user, it defaults to being in the user's home directory.

Default:

  color
Whether to use colors when logging to the console. Valid values are ansi (equivalent to true), html, and false, which produces no color. Defaults to false on Windows, as its console does not support ansi colors.

•   Default: ansi

  confdir
The main Puppet configuration directory. The default for this setting is calculated based on the user. If the process is running as root or the user that Puppet is supposed to run as, it defaults to a system directory, but if it's running as any other user, it defaults to being in the user's home directory.

•   Default: /etc/puppetlabs/puppet

  config
The configuration file for the current puppet application.

•   Default: $confdir/${config_file_name}

  config_file_name
The name of the puppet config file.

•   Default: puppet.conf

  config_version
How to determine the configuration version. By default, it will be the time that the configuration is parsed, but you can provide a shell script to override how the version is determined. The output of this script will be added to every log message in the reports, allowing you to correlate changes on your hosts to the source version on the server.

Setting a global value for config_version in puppet.conf is not allowed (but it can be overridden from the commandline). Please set a per-environment value in environment.conf instead. For more info, see https://docs.puppetlabs.com/puppet/latest/reference/environments.html

  configprint
Print the value of a specific configuration setting. If the name of a setting is provided for this, then the value is printed and puppet exits. Comma-separate multiple values. For a list of all values, specify 'all'.

  configtimeout
How long the client should wait for the configuration to be retrieved before considering it a failure. This setting is deprecated and has been replaced by http_connect_timeout and http_read_timeout. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

•   Default: 2m

  csr_attributes
An optional file containing custom attributes to add to certificate signing requests (CSRs). You should ensure that this file does not exist on your CA puppet master; if it does, unwanted certificate extensions may leak into certificates created with the puppet cert generate command.

If present, this file must be a YAML hash containing a custom_attributes key and/or an extension_requests key. The value of each key must be a hash, where each key is a valid OID and each value is an object that can be cast to a string.

Custom attributes can be used by the CA when deciding whether to sign the certificate, but are then discarded. Attribute OIDs can be any OID value except the standard CSR attributes (i.e. attributes described in RFC 2985 section 5.4). This is useful for embedding a pre-shared key for autosigning policy executables (see the autosign setting), often by using the 1.2.840.113549.1.9.7 ("challenge password") OID.

Extension requests will be permanently embedded in the final certificate. Extension OIDs must be in the "ppRegCertExt" (1.3.6.1.4.1.34380.1.1) or "ppPrivCertExt" (1.3.6.1.4.1.34380.1.2) OID arcs. The ppRegCertExt arc is reserved for four of the most common pieces of data to embed: pp_uuid (.1), pp_instance_id (.2), pp_image_name (.3), and pp_preshared_key (.4) --- in the YAML file, these can be referred to by their short descriptive names instead of their full OID. The ppPrivCertExt arc is unregulated, and can be used for site-specific extensions.

•   Default: $confdir/csr_attributes.yaml

  csrdir
Where the CA stores certificate requests

•   Default: $cadir/requests

  daemonize
Whether to send the process into the background. This defaults to true on POSIX systems, and to false on Windows (where Puppet currently cannot daemonize).

•   Default: true

  data_binding_terminus
Where to retrive information about data.

•   Default: hiera

  default_file_terminus
The default source for files if no server is given in a uri, e.g. puppet:///file. The default of rest causes the file to be retrieved using the server setting. When running apply the default is file_server, causing requests to be filled locally.

•   Default: rest

  default_manifest
The default main manifest for directory environments. Any environment that doesn't set the manifest setting in its environment.conf file will use this manifest.

This setting's value can be an absolute or relative path. An absolute path will make all environments default to the same main manifest; a relative path will allow each environment to use its own manifest, and Puppet will resolve the path relative to each environment's main directory.

In either case, the path can point to a single file or to a directory of manifests to be evaluated in alphabetical order.

•   Default: ./manifests

  default_schedules
Boolean; whether to generate the default schedule resources. Setting this to false is useful for keeping external report processors clean of skipped schedule resources.

•   Default: true

  deviceconfig
Path to the device config file for puppet device.

•   Default: $confdir/device.conf

  devicedir
The root directory of devices' $vardir.

•   Default: $vardir/devices

  diff
Which diff command to use when printing differences between files. This setting has no default value on Windows, as standard diff is not available, but Puppet can use many third-party diff tools.

•   Default: diff

  diff_args
Which arguments to pass to the diff command when printing differences between files. The command to use can be chosen with the diff setting.

•   Default: -u

  digest_algorithm
Which digest algorithm to use for file resources and the filebucket. Valid values are md5, sha256. Default is md5.

•   Default: md5

  disable_per_environment_manifest
Whether to disallow an environment-specific main manifest. When set to true, Puppet will use the manifest specified in the default_manifest setting for all environments. If an environment specifies a different main manifest in its environment.conf file, catalog requests for that environment will fail with an error.

This setting requires default_manifest to be set to an absolute path.

•   Default: false

  disable_warnings
A comma-separated list of warning types to suppress. If large numbers of warnings are making Puppet's logs too large or difficult to use, you can temporarily silence them with this setting.

If you are preparing to upgrade Puppet to a new major version, you should re-enable all warnings for a while.

Valid values for this setting are:

•   deprecations --- disables deprecation warnings.

•   Default: []

  dns_alt_names
The comma-separated list of alternative DNS names to use for the local host.

When the node generates a CSR for itself, these are added to the request as the desired subjectAltName in the certificate: additional DNS labels that the certificate is also valid answering as.

This is generally required if you use a non-hostname certname, or if you want to use puppet kick or puppet resource -H and the primary certname does not match the DNS name you use to communicate with the host.

This is unnecessary for agents, unless you intend to use them as a server for puppet kick or remote puppet resource management.

It is rarely necessary for servers; it is usually helpful only if you need to have a pool of multiple load balanced masters, or for the same master to respond on two physically separate networks under different names.

  document_all
Whether to document all resources when using puppet doc to generate manifest documentation.

•   Default: false

  environment
The environment Puppet is running in. For clients (e.g., puppet agent) this determines the environment itself, which is used to find modules and much more. For servers (i.e., puppet master) this provides the default environment for nodes we know nothing about.

•   Default: production

  environment_data_provider
The name of a registered environment data provider. The two built in and registered providers are 'none' (no environment specific data), and 'function' (environment specific data obtained by calling the function 'environment::data()'). Other environment data providers may be registered in modules on the module path. For such custom data providers see the respective module documentation.

•   Default: none

  environment_timeout
How long the Puppet master should cache data it loads from an environment. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y). A value of 0 will disable caching. This setting can also be set to unlimited, which will cache environments until the master is restarted or told to refresh the cache.

You should change this setting once your Puppet deployment is doing non-trivial work. We chose the default value of 0 because it lets new users update their code without any extra steps, but it lowers the performance of your Puppet master.

We recommend setting this to unlimited and explicitly refreshing your Puppet master as part of your code deployment process.

•   With Puppet Server, you should refresh environments by calling the environment-cache API endpoint. See the docs for the Puppet Server administrative API.

•   With a Rack Puppet master, you should restart the web server or the application server. Passenger lets you touch a restart.txt file to refresh an application without restarting Apache; see the Passenger docs for details.

We don't recommend using any value other than 0 or unlimited, since most Puppet masters use a pool of Ruby interpreters which all have their own cache timers. When these timers drift out of sync, agents can be served inconsistent catalogs.

•   Default: 0

  environmentpath
A search path for directory environments, as a list of directories separated by the system path separator character. (The POSIX path separator is ':', and the Windows path separator is ';'.)

This setting must have a value set to enable directory environments. The recommended value is $codedir/environments. For more details, see https://docs.puppetlabs.com/puppet/latest/reference/environments.html

•   Default: $codedir/environments

  evaltrace
Whether each resource should log when it is being evaluated. This allows you to interactively see exactly what is being done.

•   Default: false

  external_nodes
An external command that can produce node information. The command's output must be a YAML dump of a hash, and that hash must have a classes key and/or a parameters key, where classes is an array or hash and parameters is a hash. For unknown nodes, the command should exit with a non-zero exit code.

This command makes it straightforward to store your node mapping information in other data sources like databases.

•   Default: none

  factpath
Where Puppet should look for facts. Multiple directories should be separated by the system path separator character. (The POSIX path separator is ':', and the Windows path separator is ';'.)

•   Default: $vardir/lib/facter:$vardir/facts

  facts_terminus
The node facts terminus.

•   Default: facter

  fileserverconfig
Where the fileserver configuration is stored.

•   Default: $confdir/fileserver.conf

  filetimeout
The minimum time to wait between checking for updates in configuration files. This timeout determines how quickly Puppet checks whether a file (such as manifests or templates) has changed on disk. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

•   Default: 15s

  forge_authorization
The authorization key to connect to the Puppet Forge. Leave blank for unauthorized or license based connections

Default:

  freeze_main
Freezes the 'main' class, disallowing any code to be added to it. This essentially means that you can't have any code outside of a node, class, or definition other than in the site manifest.

•   Default: false

  genconfig
When true, causes Puppet applications to print an example config file to stdout and exit. The example will include descriptions of each setting, and the current (or default) value of each setting, incorporating any settings overridden on the CLI (with the exception of genconfig itself). This setting only makes sense when specified on the command line as --genconfig.

•   Default: false

  genmanifest
Whether to just print a manifest to stdout and exit. Only makes sense when specified on the command line as --genmanifest. Takes into account arguments specified on the CLI.

•   Default: false

  graph
Whether to create .dot graph files, which let you visualize the dependency and containment relationships in Puppet's catalog. You can load and view these files with tools like OmniGraffle http://www.omnigroup.com/applications/omnigraffle/ (OS X) or graphviz http://www.graphviz.org/ (multi-platform).

Graph files are created when applying a catalog, so this setting should be used on nodes running puppet agent or puppet apply.

The graphdir setting determines where Puppet will save graphs. Note that we don't save graphs for historical runs; Puppet will replace the previous .dot files with new ones every time it applies a catalog.

See your graphing software's documentation for details on opening .dot files. If you're using GraphViz's dot command, you can do a quick PNG render with dot -Tpng <DOT FILE> -o <OUTPUT FILE>.

•   Default: false

  graphdir
Where to save .dot-format graphs (when the graph setting is enabled).

•   Default: $statedir/graphs

  group
The group puppet master should run as.

•   Default: puppet

  hiera_config
The hiera configuration file. Puppet only reads this file on startup, so you must restart the puppet master every time you edit it.

•   Default: $codedir/hiera.yaml

  hostcert
Where individual hosts store and look for their certificates.

•   Default: $certdir/$certname.pem

  hostcrl
Where the host's certificate revocation list can be found. This is distinct from the certificate authority's CRL.

•   Default: $ssldir/crl.pem

  hostcsr
Where individual hosts store and look for their certificate requests.

•   Default: $ssldir/csr_$certname.pem

  hostprivkey
Where individual hosts store and look for their private key.

•   Default: $privatekeydir/$certname.pem

  hostpubkey
Where individual hosts store and look for their public key.

•   Default: $publickeydir/$certname.pem

  http_connect_timeout
The maximum amount of time to wait when establishing an HTTP connection. The default value is 2 minutes. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

•   Default: 2m

  http_debug
Whether to write HTTP request and responses to stderr. This should never be used in a production environment.

•   Default: false

  http_keepalive_timeout
The maximum amount of time a persistent HTTP connection can remain idle in the connection pool, before it is closed. This timeout should be shorter than the keepalive timeout used on the HTTP server, e.g. Apache KeepAliveTimeout directive. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

•   Default: 4s

  http_proxy_host
The HTTP proxy host to use for outgoing connections. Note: You may need to use a FQDN for the server hostname when using a proxy. Environment variable http_proxy or HTTP_PROXY will override this value

•   Default: none

  http_proxy_password
The password for the user of an authenticated HTTP proxy. Requires the http_proxy_user setting.

Note that passwords must be valid when used as part of a URL. If a password contains any characters with special meanings in URLs (as specified by RFC 3986 section 2.2), they must be URL-encoded. (For example, # would become %23.)

•   Default: none

  http_proxy_port
The HTTP proxy port to use for outgoing connections

•   Default: 3128

  http_proxy_user
The user name for an authenticated HTTP proxy. Requires the http_proxy_host setting.

•   Default: none

  http_read_timeout
The time to wait for one block to be read from an HTTP connection. If nothing is read after the elapsed interval then the connection will be closed. The default value is unlimited. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

Default:

  ignorecache
Ignore cache and always recompile the configuration. This is useful for testing new configurations, where the local cache may in fact be stale even if the timestamps are up to date - if the facts change or if the server changes.

•   Default: false

  ignoremissingtypes
Skip searching for classes and definitions that were missing during a prior compilation. The list of missing objects is maintained per-environment and persists until the environment is cleared or the master is restarted.

•   Default: false

  ignoreschedules
Boolean; whether puppet agent should ignore schedules. This is useful for initial puppet agent runs.

•   Default: false

  keylength
The bit length of keys.

•   Default: 4096

  lastrunfile
Where puppet agent stores the last run report summary in yaml format.

•   Default: $statedir/last_run_summary.yaml

  lastrunreport
Where puppet agent stores the last run report in yaml format.

•   Default: $statedir/last_run_report.yaml

  ldapattrs
The LDAP attributes to include when querying LDAP for nodes. All returned attributes are set as variables in the top-level scope. Multiple values should be comma-separated. The value 'all' returns all attributes.

•   Default: all

  ldapbase
The search base for LDAP searches. It's impossible to provide a meaningful default here, although the LDAP libraries might have one already set. Generally, it should be the 'ou=Hosts' branch under your main directory.

  ldapclassattrs
The LDAP attributes to use to define Puppet classes. Values should be comma-separated.

•   Default: puppetclass

  ldapparentattr
The attribute to use to define the parent node.

•   Default: parentnode

  ldappassword
The password to use to connect to LDAP.

  ldapport
The LDAP port. Only used if node_terminus is set to ldap.

•   Default: 389

  ldapserver
The LDAP server. Only used if node_terminus is set to ldap.

•   Default: ldap

  ldapssl
Whether SSL should be used when searching for nodes. Defaults to false because SSL usually requires certificates to be set up on the client side.

•   Default: false

  ldapstackedattrs
The LDAP attributes that should be stacked to arrays by adding the values in all hierarchy elements of the tree. Values should be comma-separated.

•   Default: puppetvar

  ldapstring
The search string used to find an LDAP node.

•   Default: (&(objectclass=puppetClient)(cn=%s))

  ldaptls
Whether TLS should be used when searching for nodes. Defaults to false because TLS usually requires certificates to be set up on the client side.

•   Default: false

  ldapuser
The user to use to connect to LDAP. Must be specified as a full DN.

  libdir
An extra search path for Puppet. This is only useful for those files that Puppet will load on demand, and is only guaranteed to work for those cases. In fact, the autoload mechanism is responsible for making sure this directory is in Ruby's search path

•   Default: $vardir/lib

  localcacert
Where each client stores the CA certificate.

•   Default: $certdir/ca.pem

  log_level
Default logging level for messages from Puppet. Allowed values are:

•   debug

•   info

•   notice

•   warning

•   err

•   alert

•   emerg

•   crit

•   Default: notice

  logdir
The directory in which to store log files

Default:

  manage_internal_file_permissions
Whether Puppet should manage the owner, group, and mode of files it uses internally

•   Default: true

  manifest
The entry-point manifest for puppet master. This can be one file or a directory of manifests to be evaluated in alphabetical order. Puppet manages this path as a directory if one exists or if the path ends with a / or .

Setting a global value for manifest in puppet.conf is not allowed (but it can be overridden from them commandline). Please use directory environments instead. If you need to use something other than the environment's manifests directory as the main manifest, you can set manifest in environment.conf. For more info, see https://docs.puppetlabs.com/puppet/latest/reference/environments.html

Default:

  masterhttplog
Where the puppet master web server saves its access log. This is only used when running a WEBrick puppet master. When puppet master is running under a Rack server like Passenger, that web server will have its own logging behavior.

•   Default: $logdir/masterhttp.log

  masterport
The port for puppet master traffic. For puppet master, this is the port to listen on; for puppet agent, this is the port to make requests on. Both applications use this setting to get the port.

•   Default: 8140

  max_deprecations
Sets the max number of logged/displayed parser validation deprecation warnings in case multiple deprecation warnings have been detected. A value of 0 blocks the logging of deprecation warnings. The count is per manifest.

•   Default: 10

  max_errors
Sets the max number of logged/displayed parser validation errors in case multiple errors have been detected. A value of 0 is the same as a value of 1; a minimum of one error is always raised. The count is per manifest.

•   Default: 10

  max_warnings
Sets the max number of logged/displayed parser validation warnings in case multiple warnings have been detected. A value of 0 blocks logging of warnings. The count is per manifest.

•   Default: 10

  maximum_uid
The maximum allowed UID. Some platforms use negative UIDs but then ship with tools that do not know how to handle signed ints, so the UIDs show up as huge numbers that can then not be fed back into the system. This is a hackish way to fail in a slightly more useful way when that happens.

•   Default: 4294967290

  mkusers
Whether to create the necessary user and group that puppet agent will run as.

•   Default: false

  module_groups
Extra module groups to request from the Puppet Forge

Default:

  module_repository
The module repository

•   Default: https://forgeapi.puppetlabs.com

  module_skeleton_dir
The directory which the skeleton for module tool generate is stored.

•   Default: $module_working_dir/skeleton

  module_working_dir
The directory into which module tool data is stored

•   Default: $vardir/puppet-module

  modulepath
The search path for modules, as a list of directories separated by the system path separator character. (The POSIX path separator is ':', and the Windows path separator is ';'.)

Setting a global value for modulepath in puppet.conf is not allowed (but it can be overridden from the commandline). Please use directory environments instead. If you need to use something other than the default modulepath of <ACTIVE ENVIRONMENT'S MODULES DIR>:$basemodulepath, you can set modulepath in environment.conf. For more info, see https://docs.puppetlabs.com/puppet/latest/reference/environments.html

  name
The name of the application, if we are running as one. The default is essentially $0 without the path or .rb.

Default:

  node_cache_terminus
How to store cached nodes. Valid values are (none), 'json', 'msgpack', 'yaml' or write only yaml ('write_only_yaml'). The master application defaults to 'write_only_yaml', all others to none.

Default:

  node_name
How the puppet master determines the client's identity and sets the 'hostname', 'fqdn' and 'domain' facts for use in the manifest, in particular for determining which 'node' statement applies to the client. Possible values are 'cert' (use the subject's CN in the client's certificate) and 'facter' (use the hostname that the client reported in its facts)

•   Default: cert

  node_name_fact
The fact name used to determine the node name used for all requests the agent makes to the master. WARNING: This setting is mutually exclusive with node_name_value. Changing this setting also requires changes to the default auth.conf configuration on the Puppet Master. Please see http://links.puppetlabs.com/node_name_fact for more information.

  node_name_value
The explicit value used for the node name for all requests the agent makes to the master. WARNING: This setting is mutually exclusive with node_name_fact. Changing this setting also requires changes to the default auth.conf configuration on the Puppet Master. Please see http://links.puppetlabs.com/node_name_value for more information.

•   Default: $certname

  node_terminus
Where to find information about nodes.

•   Default: plain

  noop
Whether to apply catalogs in noop mode, which allows Puppet to partially simulate a normal run. This setting affects puppet agent and puppet apply.

When running in noop mode, Puppet will check whether each resource is in sync, like it does when running normally. However, if a resource attribute is not in the desired state (as declared in the catalog), Puppet will take no action, and will instead report the changes it would have made. These simulated changes will appear in the report sent to the puppet master, or be shown on the console if running puppet agent or puppet apply in the foreground. The simulated changes will not send refresh events to any subscribing or notified resources, although Puppet will log that a refresh event would have been sent.

Important note: The noop metaparameter https://docs.puppetlabs.com/references/latest/metaparameter.html#noop allows you to apply individual resources in noop mode, and will override the global value of the noop setting. This means a resource with noop => false will be changed if necessary, even when running puppet agent with noop = true or --noop. (Conversely, a resource with noop => true will only be simulated, even when noop mode is globally disabled.)

•   Default: false

  onetime
Perform one configuration run and exit, rather than spawning a long-running daemon. This is useful for interactively running puppet agent, or running puppet agent from cron.

•   Default: false

  ordering
How unrelated resources should be ordered when applying a catalog. Allowed values are title-hash, manifest, and random. This setting affects puppet agent and puppet apply, but not puppet master.

•   manifest (the default) will use the order in which the resources were declared in their manifest files.

•   title-hash (the default in 3.x) will order resources randomly, but will use the same order across runs and across nodes. It is only of value if you're migrating from 3.x and have errors running with manifest.

•   random will order resources randomly and change their order with each run. This can work like a fuzzer for shaking out undeclared dependencies.

Regardless of this setting's value, Puppet will always obey explicit dependencies set with the before/require/notify/subscribe metaparameters and the ->/~> chaining arrows; this setting only affects the relative ordering of unrelated resources.

•   Default: manifest

  passfile
Where puppet agent stores the password for its private key. Generally unused.

•   Default: $privatedir/password

  path
The shell search path. Defaults to whatever is inherited from the parent process.

This setting can only be set in the [main] section of puppet.conf; it cannot be set in [master], [agent], or an environment config section.

•   Default: none

  pidfile
The file containing the PID of a running process. This file is intended to be used by service management frameworks and monitoring systems to determine if a puppet process is still in the process table.

•   Default: $rundir/${run_mode}.pid

  plugindest
Where Puppet should store plugins that it pulls down from the central server.

•   Default: $libdir

  pluginfactdest
Where Puppet should store external facts that are being handled by pluginsync

•   Default: $vardir/facts.d

  pluginfactsource
Where to retrieve external facts for pluginsync

•   Default: puppet:///pluginfacts

  pluginsignore
What files to ignore when pulling down plugins.

•   Default: .svn CVS .git

  pluginsource
From where to retrieve plugins. The standard Puppet file type is used for retrieval, so anything that is a valid file source can be used here.

•   Default: puppet:///plugins

  pluginsync
Whether plugins should be synced with the central server.

•   Default: true

  postrun_command
A command to run after every agent run. If this command returns a non-zero return code, the entire Puppet run will be considered to have failed, even though it might have performed work during the normal run.

  preferred_serialization_format
The preferred means of serializing ruby instances for passing over the wire. This won't guarantee that all instances will be serialized using this method, since not all classes can be guaranteed to support this format, but it will be used for all classes that support it.

•   Default: pson

  prerun_command
A command to run before every agent run. If this command returns a non-zero return code, the entire Puppet run will fail.

  preview_outputdir
The directory where catalog previews per node are generated.

•   Default: $vardir/preview

  priority
The scheduling priority of the process. Valid values are 'high', 'normal', 'low', or 'idle', which are mapped to platform-specific values. The priority can also be specified as an integer value and will be passed as is, e.g. -5. Puppet must be running as a privileged user in order to increase scheduling priority.

Default:

  privatedir
Where the client stores private certificate information.

•   Default: $ssldir/private

  privatekeydir
The private key directory.

•   Default: $ssldir/private_keys

  profile
Whether to enable experimental performance profiling

•   Default: false

  publickeydir
The public key directory.

•   Default: $ssldir/public_keys

  puppetdlog
The fallback log file. This is only used when the --logdest option is not specified AND Puppet is running on an operating system where both the POSIX syslog service and the Windows Event Log are unavailable. (Currently, no supported operating systems match that description.)

Despite the name, both puppet agent and puppet master will use this file as the fallback logging destination.

For control over logging destinations, see the --logdest command line option in the manual pages for puppet master, puppet agent, and puppet apply. You can see man pages by running puppet <SUBCOMMAND> --help, or read them online at https://docs.puppetlabs.com/references/latest/man/.

•   Default: $logdir/puppetd.log

  report
Whether to send reports after every transaction.

•   Default: true

  report_port
The port to communicate with the report_server.

•   Default: $masterport

  report_server
The server to send transaction reports to.

•   Default: $server

  reportdir
The directory in which to store reports. Each node gets a separate subdirectory in this directory. This setting is only used when the store report processor is enabled (see the reports setting).

•   Default: $vardir/reports

  reports
The list of report handlers to use. When using multiple report handlers, their names should be comma-separated, with whitespace allowed. (For example, reports = http, store.)

This setting is relevant to puppet master and puppet apply. The puppet master will call these report handlers with the reports it receives from agent nodes, and puppet apply will call them with its own report. (In all cases, the node applying the catalog must have report = true.)

See the report reference for information on the built-in report handlers; custom report handlers can also be loaded from modules. (Report handlers are loaded from the lib directory, at puppet/reports/NAME.rb.)

•   Default: store

  reporturl
The URL that reports should be forwarded to. This setting is only used when the http report processor is enabled (see the reports setting).

•   Default: http://localhost:3000/reports/upload

  req_bits
The bit length of the certificates.

•   Default: 4096

  requestdir
Where host certificate requests are stored.

•   Default: $ssldir/certificate_requests

  resourcefile
The file in which puppet agent stores a list of the resources associated with the retrieved configuration.

•   Default: $statedir/resources.txt

  rest_authconfig
The configuration file that defines the rights to the different rest indirections. This can be used as a fine-grained authorization system for puppet master.

•   Default: $confdir/auth.conf

  route_file
The YAML file containing indirector route configuration.

•   Default: $confdir/routes.yaml

  rundir
Where Puppet PID files are kept.

Default:

  runinterval
How often puppet agent applies the catalog. Note that a runinterval of 0 means "run continuously" rather than "never run." If you want puppet agent to never run, you should start it with the --no-client option. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

•   Default: 30m

  serial
Where the serial number for certificates is stored.

•   Default: $cadir/serial

  server
The puppet master server to which the puppet agent should connect.

•   Default: puppet

  server_datadir
The directory in which serialized data is stored, usually in a subdirectory.

•   Default: $vardir/server_data

  show_diff
Whether to log and report a contextual diff when files are being replaced. This causes partial file contents to pass through Puppet's normal logging and reporting system, so this setting should be used with caution if you are sending Puppet's reports to an insecure destination. This feature currently requires the diff/lcs Ruby library.

•   Default: false

  signeddir
Where the CA stores signed certificates.

•   Default: $cadir/signed

  splay
Whether to sleep for a pseudo-random (but consistent) amount of time before a run.

•   Default: false

  splaylimit
The maximum time to delay before runs. Defaults to being the same as the run interval. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

•   Default: $runinterval

  srv_domain
The domain which will be queried to find the SRV records of servers to use.

•   Default: corp.puppetlabs.net

  ssl_client_ca_auth
Certificate authorities who issue server certificates. SSL servers will not be considered authentic unless they possess a certificate issued by an authority listed in this file. If this setting has no value then the Puppet master's CA certificate (localcacert) will be used.

Default:

  ssl_client_header
The header containing an authenticated client's SSL DN. This header must be set by the proxy to the authenticated client's SSL DN (e.g., /CN=puppet.puppetlabs.com). Puppet will parse out the Common Name (CN) from the Distinguished Name (DN) and use the value of the CN field for authorization.

Note that the name of the HTTP header gets munged by the web server common gateway inteface: an HTTP_ prefix is added, dashes are converted to underscores, and all letters are uppercased. Thus, to use the X-Client-DN header, this setting should be HTTP_X_CLIENT_DN.

•   Default: HTTP_X_CLIENT_DN

  ssl_client_verify_header
The header containing the status message of the client verification. This header must be set by the proxy to 'SUCCESS' if the client successfully authenticated, and anything else otherwise.

Note that the name of the HTTP header gets munged by the web server common gateway inteface: an HTTP_ prefix is added, dashes are converted to underscores, and all letters are uppercased. Thus, to use the X-Client-Verify header, this setting should be HTTP_X_CLIENT_VERIFY.

•   Default: HTTP_X_CLIENT_VERIFY

  ssl_server_ca_auth
Certificate authorities who issue client certificates. SSL clients will not be considered authentic unless they possess a certificate issued by an authority listed in this file. If this setting has no value then the Puppet master's CA certificate (localcacert) will be used.

Default:

  ssldir
Where SSL certificates are kept.

•   Default: $confdir/ssl

  statedir
The directory where Puppet state is stored. Generally, this directory can be removed without causing harm (although it might result in spurious service restarts).

•   Default: $vardir/state

  statefile
Where puppet agent and puppet master store state associated with the running configuration. In the case of puppet master, this file reflects the state discovered through interacting with clients.

•   Default: $statedir/state.yaml

  storeconfigs
Whether to store each client's configuration, including catalogs, facts, and related data. This also enables the import and export of resources in the Puppet language - a mechanism for exchange resources between nodes.

By default this uses the 'puppetdb' backend.

You can adjust the backend using the storeconfigs_backend setting.

•   Default: false

  storeconfigs_backend
Configure the backend terminus used for StoreConfigs. By default, this uses the PuppetDB store, which must be installed and configured before turning on StoreConfigs.

•   Default: puppetdb

  strict_hostname_checking
Whether to only search for the complete hostname as it is in the certificate when searching for node information in the catalogs.

•   Default: false

  strict_variables
Makes the parser raise errors when referencing unknown variables. (This does not affect referencing variables that are explicitly set to undef).

•   Default: false

  summarize
Whether to print a transaction summary.

•   Default: false

  syslogfacility
What syslog facility to use when logging to syslog. Syslog has a fixed list of valid facilities, and you must choose one of those; you cannot just make one up.

•   Default: daemon

  tags
Tags to use to find resources. If this is set, then only resources tagged with the specified tags will be applied. Values must be comma-separated.

  trace
Whether to print stack traces on some errors

•   Default: false

  trusted_oid_mapping_file
File that provides mapping between custom SSL oids and user-friendly names

•   Default: $confdir/custom_trusted_oid_mapping.yaml

  trusted_server_facts
Stores a trusted set of server-side global variables in a hash called $server_facts, which cannot be cannot be overridden by client_facts or logic in manifests. Makes it illegal to assign to the variable $server_facts in any scope.

•   Default: false

  use_cached_catalog
Whether to only use the cached catalog rather than compiling a new catalog on every run. Puppet can be run with this enabled by default and then selectively disabled when a recompile is desired.

•   Default: false

  use_srv_records
Whether the server will search for SRV records in DNS for the current domain.

•   Default: false

  usecacheonfailure
Whether to use the cached configuration when the remote configuration will not compile. This option is useful for testing new configurations, where you want to fix the broken configuration rather than reverting to a known-good one.

•   Default: true

  user
The user puppet master should run as.

•   Default: puppet

  vardir
Where Puppet stores dynamic and growing data. The default for this setting is calculated specially, like confdir_.

•   Default: /opt/puppetlabs/puppet/cache

  waitforcert
How frequently puppet agent should ask for a signed certificate.

When starting for the first time, puppet agent will submit a certificate signing request (CSR) to the server named in the ca_server setting (usually the puppet master); this may be autosigned, or may need to be approved by a human, depending on the CA server's configuration.

Puppet agent cannot apply configurations until its approved certificate is available. Since the certificate may or may not be available immediately, puppet agent will repeatedly try to fetch it at this interval. You can turn off waiting for certificates by specifying a time of 0, in which case puppet agent will exit if it cannot get a cert. This setting can be a time interval in seconds (30 or 30s), minutes (30m), hours (6h), days (2d), or years (5y).

•   Default: 2m

  yamldir
The directory in which YAML data is stored, usually in a subdirectory.

•   Default: $vardir/yaml

This page autogenerated on 2015-05-18 10:15:47 -0700