Red Hat Enterprise Linux/x86 AS 3 (Taroon)
====================================

The contents of this CD-ROM are Copyright (C) 1995-2003 Red Hat, Inc.  and
others.  Please see the individual copyright notices in each source package
for distribution terms.  The distribution terms of the tools copyrighted by
Red Hat, Inc. are as noted in the file EULA.

Red Hat과 RPM은 Red Hat, Inc의 등록 상표입니다.

============================================================================
디렉토리 구조

Red Hat Enterprise Linux는 설치 CD-ROM과 소스 코드 CD-ROM을 
포함한 7장의 CD-ROM으로 이루어져 있습니다.

첫번째 CD을 사용하여 거의 모든 시스템 상에서 설치 프로그램으로 직접 부팅할 수 있으며,
다음과 같은 디렉토리 구조로 이루어져 있습니다 (/mnt/cdrom은 CD-ROM의 마운트 지점을
의미합니다):

/mnt/cdrom
  |----> RedHat
  |        |----> RPMS         -- 바이너리 패키지들
  |        `----> base         -- 설치 과정에서 사용될 이번 버전의 Red Hat
  |                               Enterprise Linux 관련 정보
  |----> images                -- 부트 이미지와 드라이버 디스크 이미지들
  |----> isolinux              -- CD 부팅하는데 사용된 파일들
  |----> dosutils              -- DOS에서 사용되는 설치 유틸리티
  |----> README                -- 이 파일
  |----> RELEASE-NOTES         -- 이번 버전 Red Hat Enterprise Linux
  |                               출시와 관련된 최신 정보
  `----> RPM-GPG-KEY           -- Red Hat 패키지에 사용되는 GPG 서명

나머지 설치 CD도 CD 1과 비슷합니다. 단지 RedHat 하부 디렉토리가 존재한다는
차이점이 있습니다.

소스 코드 CD의 디렉토리 배치는 다음과 같습니다:

/mnt/cdrom
  |----> SRPMS                 -- 소스 패키지들
  `----> RPM-GPG-KEY           -- Red Hat 패키지에 사용되는 GPG 서명

만일 NFS, FTP 혹은 HTTP 설치에 사용될 설치 트리를 설정하신다면 모든 
설치 CD에서 RedHat 디렉토리에 들어있는 RELEASE-NOTES 파일과 그 외 모든 파일들을 
복사하셔야 합니다. 리눅스나 유닉스 시스템에서 다음과 같은 단계를 거쳐 
서버에 /target/directory를 적절히 설정하실 수 있습니다. 
(각 디스크에서 다음 과정을 반복해 주십시오):

    1) 디스크를 넣습니다
    2) mount /mnt/cdrom
    3) cp -a /mnt/cdrom/RedHat /target/directory
    4) cp /mnt/cdrom/RELEASE-NOTES* /target/directory (설치 CD 1만)
    5) umount /mnt/cdrom

============================================================================
설치하기

많은 컴퓨터들이 CD-ROM 부팅을 지원합니다. 이러한 컴퓨터를 가지고 계시다면
(그리고 제대로 설정이 되어있다면) 부팅 디스켓을 사용하지 않고 바로 Red Hat Enterprise
Linux 설치 CD 1을 부팅하십시오. 부팅 후,
Red Hat Enterprise Linux 설치 프로그램이 시작될 것이며,
CD-ROM에서 시스템을 설치하실 수 있습니다.

부팅 디스켓이 없이는 Red Hat Enterprise Linux 설치를 시작할 수 없는 컴퓨터의 경우,
필요한 디스켓을 생성하기 위해 한 개 이상의 이미지 파일을 사용하셔야 합니다.
필요한 이미지 파일들은 images 디렉토리에서 찾으실 수 있습니다.
이 디렉토리에는 다음과 같은 이미지 파일들이 포함되어 있습니다:

  - bootdisk.img - 기본 부트 디스켓 이미지 파일

  - drvblock.img - 추가 블록 장치 드라이브를 포함한 이미지 파일

  - drvnet.img - 추가 네트워크 드라이버를 포함한 이미지 파일

  - pcmciadd.img - PCMCIA 드라이버 이미지 파일

bootdisk.img 파일을 사용하여 생성된 디스켓은 여러분이 어떠한 설치 방식을
선택하셨는지 여부와 상관없이 모든 설치에 사용됩니다.

또한 CD-ROM 또는 IDE/ATAPI 장치를 사용한 하드 디스크 설치를 수행하지 않으신다면,
한 개 이상의 드라이버 디스켓 이미지 파일을 사용하여 한 개 이상의 드라이버 디스켓도
만드셔야 합니다.

설치 과정에서 IDE가 아닌 대용량 저장 장치 (예, SCSI 디스크나 CD-ROM 드라이브)가 사용된다면,
drvblock.img 파일을 사용하여 만든 디스켓도 필요합니다.

네트워크 기반 설치 방식을 사용하시는 경우에는
drvnet.img 파일을 사용하여 만든 디스켓을 사용하셔야 합니다.

설치 과정에서 PCMCIA 장치들 (예, PCMCIA 기반 CD-ROM 드라이브나 네트워크 어댑터)가
사용된다면, pcmciadd.img 파일을 사용하여 디스켓을 만드셔야 합니다

이 이미지 파일들을 디스켓에 작성하시려면, dosutils 디렉토리에서
rawrite 프로그램을 사용하시거나, 또는 리눅스 유사 시스템에서는 'dd' 명령을
입력하시면 됩니다. 이 프로그램들은 이미지 파일의 내용을 디스켓에 기록할 것입니다.
일단 디스켓 생성을 마치면, 부팅 디스켓을 삽입하시고 컴퓨터를 부팅하십시오.

images/ 디렉토리에서는 boot.iso도 찾으실 수 있습니다. 이 파일은 ISO 이미지로서
Red Hat Enterprise Linux 설치 프로그램을 부팅하는데 사용됩니다.  이 파일을 사용하여
여러 장의 디스켓을 사용할 필요 없이 간편하게 네트워크 기반 설치를 시작할 수 있습니다.
boot.iso를 사용하기 위해서는, CD-ROM 드라이브 부팅이 가능한 컴퓨터를 가지고 계셔야 하며
CD-ROM 부팅하도록 BIOS를 설정하셔야 합니다.
그 후 boot.iso를 R/RW CD-ROM에 구우십시오.

============================================================================
도움 받기

웹 사용이 가능하신 분은, http://www.redhat.com을 방문하시기 바랍니다.
메일링 리스트는 다음 사이트에서 찾으실 수 있습니다:

                    http://www.redhat.com/mailing-lists

만일 인터넷이 없으셔도, 메일링 리스트에 가입하실수 있습니다.
 

가입하시려면 이메일을 taroon-list-request@redhat.com 로

                                 subscribe

이라 제목을 쓰신후 보내주십시오. 내용은 없어도 됩니다.

============================================================================
EXPORT CONTROL

As required by U.S. law, user represents and warrants that it: (a)
understands that certain of the software are subject to export controls
under the U.S. Commerce Departments Export Administration Regulations
(EAR); (b) is not located in a prohibited destination country under the EAR
or U.S. sanctions regulations (currently Cuba, Iran, Iraq, Libya, North
Korea, Sudan and Syria); (c) will not export, re-export, or transfer the
software to any prohibited destination, entity, or individual without the
necessary export license(s) or authorizations(s) from the U.S. Government;
(d) will not use or transfer the software for use in any sensitive nuclear,
chemical or biological weapons, or missile technology end-uses unless
authorized by the U.S. Government by regulation or specific license; (e)
understands and agrees that if it is in the United States and exports or
transfers the Software to eligible end users, it will, as required by EAR
Section 741.17(e), submit semi-annual reports to the Commerce Departments
Bureau of Industry & Security (BIS), which include the name and address
(including country) of each transferee; and (f) understands that countries
other than the United States may restrict the import, use, or export of
encryption products and that it shall be solely responsible for compliance
with any such import, use, or export restrictions.

