红帽企业 Linux/x86 AS 3 (Taroon)
====================================

本光盘中的内容版权所有 (C) 1995-2003 Red Hat, Inc. 及其它。
具体发行条件请参考每个源码软件包中的个别版权声明。
EULA 文件中注明了由 Red Hat, Inc. 版权所有的工具的发行条件。

Red Hat、红帽、和 RPM 是 Red Hat, Inc. 的商标。

============================================================================
目录结构

红帽企业 Linux 的发行版本包括安装光盘和源码光盘，共计七张。

第一张安装光盘可以在多数现代系统上被直接引导。它包含
以下目录结构（这里的 /mnt/cdrom 是光盘的挂载点）：

/mnt/cdrom
  |----> RedHat
  |        |----> RPMS         -- 二进制软件包
  |        `----> base         -- 被安装进程使用的有关本次
  |                               红帽企业 Linux 的发行版本的信息
  |----> images                -- 引导和驱动程序盘映像
  |----> isolinux              -- 用来从光盘引导的文件
  |----> dosutils              -- 用于 DOS 的安装工具
  |----> README                -- 本文件
  |----> RELEASE-NOTES         -- 关于本次红帽企业 Linux 发行版本
  |                               的最新信息
  `----> RPM-GPG-KEY           -- 红帽软件包的 GPG 签名

其它安装光盘与第一张安装光盘类似，只不过它们里面只有 RedHat
子目录。

所有源码光盘的目录结构如下所示：

/mnt/cdrom
  |----> SRPMS                 -- 源码软件包
  `----> RPM-GPG-KEY           -- 软件包的红帽 GPG 签名

如果您要为 NFS、FTP、或 HTTP 安装设置安装树，您必须复制
RELEASE-NOTES 文件和所有安装光盘的 RedHat 目录下的
所有文件。在 Linux 和 UNIX 系统中，以下步骤可以在您的服务
器上正确配置 /target/directory （请对每个光盘重复此步骤）：

    1) 插入光盘
    2) mount /mnt/cdrom
    3) cp -a /mnt/cdrom/RedHat /target/directory
    4) cp /mnt/cdrom/RELEASE-NOTES* /target/directory（只在第一张安装光盘上运行）
    5) umount /mnt/cdrom

============================================================================
安装

现在，许多计算机都能够自动从光盘引导。
如果您的机器具备这种能力（并且被正确配置），
你可以不必使用引导盘来直接从 Linux 的第一
张安装光盘引导红帽企业。引导后，红帽企业 
Linux 安装程序就会开始，您就能够从光盘安
装系统了。
如果您的计算机必须使用引导盘来启动红帽企业
Linux 的安装进程，你就必须使用一个或多个映像
文件来创建必要的软盘。您可以在映像目录中找到
这些必要的映像文件。该目录包含以下映像文件：

  - bootdisk.img - 主引导盘映像文件

  - drvblock.img - 包含附加块设备驱动程序的
                   映像文件

  - drvnet.img - 包含附加网络驱动程序的映像文件

  - pcmciadd.img - PCMCIA 驱动程序映像文件

不管您选择使用哪一种安装方法，根据 bootdisk.img
文件创建的磁盘都被用来引导所有安装。

此外，如果您要只使用 IDE/ATAPI 设备来执行光盘
或磁盘安装以外的安装，您必须使用一个或多个驱动
程序盘映像来创建一个或多个驱动程序盘。

当系统上含有非 IDE 的大型贮存设备（如 SCSI 磁
盘或光盘驱动器），并且它们在安装中被使用时，您
需要一张根据 drvblock.img 文件创建的软盘。

当您使用基于网络的安装方法时，您需要一张根据
drvnet.img 文件创建的软盘。

当您在安装中使用 PCMCIA 设备（如基于 PCMCIA
的光盘驱动器或网络适配器），您需要一张根据
pcmciadd.img 文件创建的软盘。

要把这些映像文件写入软盘，使用 dosutils 目录中的
rawrite 程序，或在类似 Linux 的系统上使用 dd 命令。
这些程序会把映像文件的内容传输到软盘上。一旦所
需的软盘都被创建了，插入引导盘，然后引导您的机器。

在 images/ 目录中还有一个 boot.iso 文件。该文件是
能够引导红帽企业 Linux 安装程序的 ISO 映像。这
种方法很方便，因为您不必使用多个软盘来启动基于
网络的安装。要使用 boot.iso 文件，您的计算机必须
能够从光盘驱动器中引导，并且它的 BIOS 也这样设
置了。然后，您必须把 boot.iso 烧录到一个可刻录或
重写的光盘上。

============================================================================
如何获取协助

能够使用万维网的用户可以查阅 http://www.redhat.com 网站。
我们的邮件列表信息位于：

                    http://www.redhat.com/mailing-lists

如果您不能够使用万维网，您仍旧可以订阅我们的主邮件列表。
 

要订阅，给 taroon-list-request@redhat.com 发送邮件，把主题设为：

                                 subscribe

您可以把邮件的主体留为空白。

============================================================================
出口控制

As required by U.S. law, user represents and warrants that it: (a)
understands that certain of the software are subject to export controls
under the U.S. Commerce Departments Export Administration Regulations
(EAR); (b) is not located in a prohibited destination country under the EAR
or U.S. sanctions regulations (currently Cuba, Iran, Iraq, Libya, North
Korea, Sudan and Syria); (c) will not export, re-export, or transfer the
software to any prohibited destination, entity, or individual without the
necessary export license(s) or authorizations(s) from the U.S. Government;
(d) will not use or transfer the software for use in any sensitive nuclear,
chemical or biological weapons, or missile technology end-uses unless
authorized by the U.S. Government by regulation or specific license; (e)
understands and agrees that if it is in the United States and exports or
transfers the Software to eligible end users, it will, as required by EAR
Section 741.17(e), submit semi-annual reports to the Commerce Departments
Bureau of Industry & Security (BIS), which include the name and address
(including country) of each transferee; and (f) understands that countries
other than the United States may restrict the import, use, or export of
encryption products and that it shall be solely responsible for compliance
with any such import, use, or export restrictions.

