( cd boot ; rm -rf Image-armv8 )
( cd boot ; ln -sf Image-armv8-6.18.23 Image-armv8 )
( cd boot ; rm -rf System.map-armv8 )
( cd boot ; ln -sf System.map-armv8-6.18.23 System.map-armv8 )
( cd boot ; rm -rf dtb )
( cd boot ; ln -sf dtb-6.18.23 dtb )
( cd boot ; rm -rf initrd-armv8 )
( cd boot ; ln -sf initrd-armv8-6.18.23 initrd-armv8 )
( cd lib/modules/6.18.23-armv8 ; rm -rf build )
( cd lib/modules/6.18.23-armv8 ; ln -sf ../../../usr/src/linux-6.18.23 build )
( cd lib/modules/6.18.23-armv8 ; rm -rf source )
( cd lib/modules/6.18.23-armv8 ; ln -sf ../../../usr/src/ source )

# The OS InitRD ships with a minimal set of firmware that's required
# for the supported Hardware Models, but we don't ship an inventory
# file.  This is because not all Hardware Models require firmware
# (in particular 32bit ARM doesn't for the supported Hardware Models
# without externally connected peripherals).
# Additionally the firmware that *is* included may not be loaded
# on the Hardware Model you're using - e.g. the firmware for the Pinebook Pro's
# LCD panel is never loaded on the Raspberry Pi, yet it's included
# within the generic OS InitRD so that it's available for the Pinebook.
# Supplying a default inventory in this case would always cause a mismatch
# between the running OS and the OS InitRD when os-initrd-mgr is first
# run.
# This is why we don't ship an inventory cache within the Kernel package.
#
# However, we do need to delete any existing inventories because the
# newly placed OS InitRD will not contain any extra firmware/local user
# customisations that may have been incorporated by os-initrd-mgr.
# Deleting this inventory cache will enable os-initrd-mgr to re-scan the
# system and re-incorporate any extra firmware/local customisations
# once the Kernel package upgrade completes (i.e. now!)

# Inventory caches from the previous invocations of os-initrd-mgr are
# now null and void.
# Note: os-initrd-mgr's live inventory caches reside within /run
#
# Firmware inventory cache:
rm -f boot/.os-initrd-fw-inventory

# Kernel module inventory cache (used for --sync-loaded-kmods)
# This contains the Kernel module file name and a hash to use for comparison
# (to know whether to refresh the modules when re-packing the OSInitRD)
rm -f boot/.os-initrd-kmod-inventory
# List of the loaded Kernel module names:
# (used for --sync-loaded-kmods and --modprobe-synced-kmods)
rm -f boot/.os-initrd-kmod-names-inventory

# Local customisations inventory cache:
rm -f boot/.os-initrd-custs-inventory

# Short-term migration of config file to /etc:
# To be removed after a few releaes.
[ -f boot/local/os-initrd-mgr.conf ] && mv -f boot/local/os-initrd-mgr.conf etc/

# Call the OS InitrRD manager to reincorporate any locally
# held user modifications, to load modules and so on and to syncronise
# the firmware.
#chroot . /usr/sbin/os-initrd-mgr -q
# Don't call it if there's a flag file set. Typically this will be within the
# Slackware Installer only. os-initrd-mgr checks for the presence of this
# flag file, but since it's running with a chroot of the OS's file system,
# this flag won't exist; hence this check.
[ ! -f /.norun-os-initrd-mgr ] && chroot . /usr/sbin/os-initrd-mgr

# To make default the synchronization of the OS InitRD's Kernel modules with
# those within the running OS (-S|--sync-loaded-kmods)
# Need to change messages around defaults within os-initrd-mgr if this changes,
# and how to unset it.
# This can be overridden locally within os-initrd-mgr's config file:
# /boot/os-initrd-mgr.conf
# chroot . /usr/sbin/os-initrd-mgr -Sq

# Collapse all 32bit ARM & x86 variants of 'i?86' into a single
# platform: 'x86' and 'arm' respectively.
export ARCH=$( uname -m | sed -e 's%i[0-9]86%x86%g' -e 's?arm.*?arm?g' )

# Execute any helper scripts found for this platform.
# This enables the Raspberry Pi's Hardware Model bootware partition
# to receive the latest Kernel, OS InitRD, DTBs et al in addition to
# the standard location, /boot.
# This may be useful for other Hardware Models that need to perform
# post installation actions, to accommodate idiosyncrasies.
[ -d /boot/platform/$ARCH/helper/ ] && {
   for helper in $( find /boot/platform/$ARCH/helper/ -name 'pkg-kernel-*' -type f ) ; do
      [ -x ${helper} ] && ${helper}
   done }
